Untitled - Nivelco Process Control Co., Inc.

an instrumentation expertLevel transmitter family – The new flagship from NIVELCOThanks to our esteemed partners the first 100 units of the new generationPiloTREK W-100 level transmitters have been commissioned since November 2012.We are proud that on the first challenge, our PiloTREK non-contact microwave leveltransmitter won the Product Award of the MagyarRegula 2012 exhibition, as aninnovative Hungarian development.The 25 GHz (K-band) PiloTREK Pulse Radarsare regarded the most progressive noncontactlevel transmitters of the industrialprocess automation field. Their accuraciesare excellent and their short and narrowantennas make their installation simple andlow cost. NIVELCO’s new K-band radarfeaturing ±3 mm accuracy and short deadband excels with its versatile housing conceptlining up plastic and aluminium versions. Itsantenna range incorporates stainless steelhorn and enclosed plastic tube varieties. Theenclosed antenna versions can be replacedwithout removing the antenna enclosure fromthe process. Local programming of thePiloTREK is aided by a plug-in displaymodule. If on-site reading is not desired thismodule may not be required thus reducingcost of ownership.The signal processing algorithm of the newPiloTREK is based on NIVELCO’s 30 yearsof experience with non-contact level measurementmaking it an excellent choice forapplications simple and challenging alike.MAIN FEATURES2-wire K-band Pulse Burst Radar25 GHz frequency23 metre measuring rangefor liquids and slurries± 3 mm accuracyEasy installation dueto small antennasHorn and enclosed antenna typesSanitary types for meetingHigh hygienic requirementsHigh temperature versionPlug-in graphical display moduleEx versionINDUSTRY SEGMENTSWater, wastewaterPower generationFood and beveragePharmaceuticalChemicalAPPLICATIONSLiquids and slurriesin general

PRODUCT CATALOGUE 2013ESTEEMED PARTNER!NIVELCO Process Control Co. celebrated its 30 th anniversary in 2012. Founded in 1982 to concentrate on the manufacture of industrial level measurement and control products,NIVELCO is now a world-class level specialist, based in Hungary. The NIVELCO strength originates from the solid base created by a family business, guided over 75 turbulent yearsby four basic principles:Respect for the Knowledge and Experience of the FoundersProfessional Pride in our ProductsResponsibility for our Colleagues and CustomersEnsuring our Products and Services provide ValueThe NIVELCO Group successfully maintained its leading position alongside other major instrument manufacturers throughout theeconomic crises of recent years. Indeed NIVELCO further increased the number of export markets served. Thanks to this healthyposition, a four-year support contract was signed recently with the Hungarian Paralympic Association, helping to support a successfulOlympic participation in the XXII Winter Olympic Games in 2014.The whole NIVELCO Company looks forward to applying these basic principles, and our existing and ever-developing skills, to thefuture requirements of our industrial control customers, in increasingly more demanding world markets.Tamás SzőllősTHE STORY OF A FAMILY VENTUREAfter training as an engineer in the "ITT Standard" telephone company, in 1939 Endre Szőllős started his own business designing andproducing telephone systems for business and industry. While the World War II did not provide an easy period for Endre and hiscolleagues, the business grew and provided good training for his sons. Following their University courses in electrical engineering andeconomics respectively, Tamás and András Szőllős were able to lead the company forward, after the early death of Endre in 1969.By 1982, the production of a series of industrial controllers had led to a developing specialisation in level measurement and control:and NIVELCO was founded. In 1989, when International trade from Hungarybecame straightforward, NIVELCO had a full, proven level control product rangeand capability, backed by well established in-house manufacturing and engineeringfacilities. In 1989 the NIVELCO launch of the World's first "Compact" ultrasonic leveltransmitter had a major impact, offering a combined sensor/transmitter in one unit,leading the world market.NIVELCO took the opportunity offered by these newly available export markets, and opened trading relationships with variousidentified distributors and sales agents. Building on existing sales links into neighbouring countries, NIVELCO also invested in theirown sales organisations and offices in Austria and Poland, and then later in the Czech Republic, Romania and Russia. Our successin these ventures demonstrates that by maintaining our business principles, expertise and specialist skills, NIVELCO can competesuccessfully with the best suppliers to the industry, by providing:Wide range of products to suit all applicationsInvestment in advanced technology expertise andhigh quality product developmentHigh specification quality management and control systemsWorldwide marketing, sales and service supportFast, flexible in-house production and customer order logisticsCompany-wide IT System to provide full product designand production dataFair, modest pricing, ensuring the capital forfuture customer support and developmentContinuing investment in our people and theirworking relationshipsDespite that in today’s globalised world, the multinational giants - set up for mass production - can rule the market, there are many medium-size companies who specialise in satisfyingcustomer needs, and manufacture products with high intellectual added value. The achievements of NIVELCO demonstrate that flexible, customer-led medium-size companies canfind their place in the market and maintain their independence.3

PRODUCT CATALOGUE 2013NIVELCO’S TIMELINE1982 NIVELCO formed1982 NIVOSONAR,the first Ultrasonic level transmitter1984 NIVOCONT Vibrating rod level switch1986 NIVOCAP Capacitance level transmitter1989 NIVOSONAR CompactUltrasonic level transmitter: A WORLD FIRST!1991 NIVELCO Messtechnik (Austria)1992 New factory opened in Budapest1994 NIVOPOINT Float level switch1994 NIVOMAG Magnetic coupling level switch1995 Accreditation to ISO 9001NIVELCO Company in Poland1996 NIVELCO Trade CenterNIVOSWITCH Vibrating fork level switch1999 NIVOPRESS Hydrostatic level transmitter2000 Budapest Factory expansion2001 NIVOTRACK Magnetostrictive level transmitter2002 Standardized mechanical and electronic constructionHART Digital Communication in the transmitters2003 ATEX Hazardous Area Approvals2004 MultiCONT the new system conceptNIVELCO Bohemia (Czech Republic)2005 MICROTREK Radar-based level transmitterNIVELCO T.M. Company in Romania2007 NIVELCO Instruments (India)2007 NIVELCO Company in Russia2008 NIVELCO Company in USA2009 AnaCONTpH, ORP and conductivity transmitterThe first SIL product certification2010 AnaCONT Dissolved oxygen transmitter2012 PiloTREK Non-contact radar level transmitterEfficient industrial production relies on the information provided by modern high technology sensors andinstrumentation. In the 1980’s the whole sensor manufacturing industry was radically changed bydevelopments in microprocessors and electronics. NIVELCO achieved the significant market position itholds today by recognising these developments.Recognising the growth in the market demand, NIVELCO earned recognition primarily with its leveltransmitter, and gained a substantial global market share, based on its purposeful business policies andconstant investment in technology.In 2013 NIVELCO produced every 20th ultrasonic transmitter sold in the world, every 50th vibration levelswitch, and every 100th radar level transmitter.In this way NIVELCO has established and maintained a leading and respected world market position, andin the past 30 years has sold more than 700,000 units of level instrumentation: NIVELCO is now the 4thlargest ultrasonic level transmitter producer in the world.20134

PRODUCT CATALOGUE 2013THE HEADQUARTERSFrom cramped beginnings in 1982, with 15 employees occupying 150 m 2 in Budapest, NIVELCO has invested in extensivefacilities capable of total control of the production requirement. In the year 2000, a further expansion to the new factory createda capacity of 10,000 m 2 , giving significant space for future development: this is currently allocated to the NIVELCO TradeCenter, and some associated activities. In the currently unused factory areas, the NIVELCO Trade Center provides leased spaceto host headquarters for other companies. NIVELCO engineering, manufacture and production is exclusively in Hungary: theother subsidiaries deal only with sales and marketing activities, plus consulting, installation and service.The modern air-conditioned factory and excellent working conditions ensure a neat and tidy environment, and create the rightconditions for producing good quality work.PRODUCTIONNIVELCO has invested heavily in the best production machinery available, with all aspects of the required production being undertaken in thefactory. Here, computer-controlled CNC machining centres, as well as surface mount electronics production facilities and fume extraction,make a clean and efficient unit. The investment is driven using a global IT system for production control and logistics. In this way NIVELCOmaintains total control over the build, and has achieved quality management system approval to ISO9001. All production output is testedusing automatic systems, heat-soaked and cycled where needed in special test chambers.SALES AND SUPPORTEfficient technical sales support to customers,contractors and distributors has always formed anessential part of the NIVELCO business approach, andthe application knowledge and experience developedin the sales team is a major business strength. Inputfrom the NIVELCO sales team covering the five regionsin Hungary, and the NIVELCO sales companies inPoland, the Czech Republic, Romania, India and Russia,as well as that from export distributors and sales agents, is treated as a valuable resource to beshared, and to guide product planning and development.To provide and present this experienceto new sales personnel, and distributors, NIVELCO produce articles for publication, plusapplication notes and reference site information for presentation on the website. Hands-ondemonstrations are encouraged, notably using a NIVELCO Exhibition bus that brings productsand practical presentations to customers acrossEurope: frequent training courses in theBudapest training centre provide customers,installers and staff from sales distributors withhands-on experience. The NIVELCO showroomprovides a permanent resource whereequipment can be demonstrated in action.MARKETINGThe marketing department at the Hungarian headquarters supplies all marketingmaterials such as brochures, advertisements and presentations, for the subsidiarycompanies to show the unified NIVELCO corporate image. The marketing teamcoordinates the constant updating of all information on the multilingual NIVELCOwebsite and is also responsible for keeping up-to-date downloadable colour brochures,technical documentation, etc. The NIVELCO movie (presented on the website) wasshot by our own NIVELCO crew to present the manufacturing capability and the wideapplication possibilities of NIVELCO instruments. Other priority tasks for themarketing department involve participation in exhibitions and organisation of regularprofessional training courses for our sales partners and customers, presenting detailedknowledge and information about the NIVELCOinstruments.5

PRODUCT CATALOGUE 2013LEVEL TRANSMITTERSNon-contact microwave level transmittersPiloTREK.......................................................................11Guided microwave level transmittersMicroTREK....................................................................15Capacitive level transmittersNIVOCAP.....................................................................19Hydrostatic level and pressure transmitters NIVOPRESS D ..............................................................24Hydrostatic level transmitters NIVOPRESS N ..............................................................26Bypass liquid level indicators NIVOFLIP .....................................................................30Magnetostrictive level transmittersNIVOTRACK.................................................................33Ultrasonic integrated level transmitters for liquids EasyTREK .....................................................................39Ultrasonic integrated level transmitters for solids EasyTREK .....................................................................42Ultrasonic compact level transmitters for liquids EchoTREK.....................................................................44Ultrasonic compact level transmitters for solids EchoTREK.....................................................................52Ultrasonic accessories ....................................................................................54Transmitter accessories ....................................................................................55LEVEL SWITCHESFloat level switches NIVOFLOAT .................................................................59Conductive level switches NIVOCONT K ..............................................................61Magnetic coupling level switches NIVOMAG ...................................................................65Magnetic tracking level switchesNIVOPOINT.................................................................69Vibrating rod level switches NIVOCONT R ..............................................................74Vibrating fork level switches NIVOSWITCH ..............................................................80Rotary paddle level switchesNIVOROTA...................................................................90RF capacitance level switchesNIVOCAP CK...............................................................94ANALYTICSpH and ORP transmittersDissolved oxygen transmittersConductivity transmittersFLOW MEASUREMENTAnaCONT....................................................................99AnaCONT..................................................................106AnaCONT..................................................................110Open channel flow measurement NIVOSONAR .............................................................119TEMPERATURE MEASUREMENTMultipoint temperature transmittersTHERMOPOINT..........................................................123Temperature transmitters THERMOCONT TT .....................................................128Thermowells, Temperature sensors THERMOCONT T .......................................................131SENSORSPressure transmitters NIPRESS D .................................................................139Ultrasonic proximity sensors and transmittersMICROSONAR...........................................................143COMPONENTSMultichannel process controller MultiCONT ................................................................147Universal interface modules UNICONT PJK ...........................................................150Multifunctional current controlled switch modules UNICONT PKK ..........................................................151Loop indicators UNICONT PD ............................................................153Universal controllersUNICONT PM............................................................156Intrinsically safe isolator power supply modules UNICONT PGK..........................................................160Ultrasonic pump control systemUNICONT PSW..........................................................161Power supply modules NIPOWER ..................................................................162Time relay modulesNITIME.......................................................................163Universal communication interface modules UNICOMM ................................................................164SOFTWARETABLE OF CONTENTSProcess visualization software NIVISION ..................................................................165TERMS AND CONDITIONS ..................................................................................1667

PRODUCT CATALOGUE 2013SUBSIDIARY AND DISTRIBUTION NETWORKTo find a local NIVELCO representation, please check distribution page onNIVELCO website!SUBSIDIARY AND DISTRIBUTION NETWORKTo contact NIVELCO, please use contact page on NIVELCO website!SALES AND APPLICATION SUPPORTsales@nivelco.comNIVELCO PROCESS CONTROL CO.H-1043 Budapest, Dugonics u. 11.Tel.: (36-1) 8890-100 or 369-7575Fax: (36-1) 8890-200 or 369-8585sales@nivelco.com http://www.nivelco.com8

LEVEL TRANSMITTERSGENERAL DESCRIPTIONSince its foundation NIVELCO has been concentratedto manufacture industrial level measurementproducts. Our main profile has not changed, this isproven by our wide level transmitter portfolioapplying many different types of level meteringprinciples. Our ultrasonic level transmitter selectionis definitely the widest on the market offeringintegrated, compact, 2- or 4-wire transmitters forliquids or solids with remarkable number ofselectable variations.The new K-band PiloTREK non-contact leveltransmitters are regarded the most progressivenon-contact level transmitters of the industrialprocess automation field.The high-precision NIVOTRACK magnetostrictivelevel transmitters with 0.1 mm resolution areapplicable for custody transfer liquid levelmeasurements.The NIVOFLIP bypass liquid level indicators aresuitable for high temperature applications andhigh pressure processes.The NIVOCAP capacitance level transmittersprovides highly reliable measurement thanks tothe well-know and accepted capacitive principle.Most of our transmitters are available in PFA coatedversion for aggressive mediums, and all transmitterfamilies have explosion-proof models applicable inhazardous environments.NON-CONTACT MICROWAVEPiloTREK25 GHz (K-band) measuring signal2-wire compact transmitterAccuracy up to ±3 mmMeasuring range up to 23 mMax. 25 bar and 180°C4-20 mA, HART communicationε r > 1.9IP67 protectionExplosion-proof modelspage 11GUIDED MICROWAVEMicroTREK2-wire compact transmitterTDR principle±5 mm or ±20 mm accuracyε r > 1.4Measuring range up to 24 m4-20 mA, HART communicationMax. 40 bar and +200°CRod or cable probesPlug-in graphic display moduleExplosion-proof models page 15CAPACITANCE LEVEL TRANSMITTERSNIVOCAP2-wire compact transmitterRod or cable probes up to 20 mε r > 1.9Fully or partly insulated probes32-point linearizationHigh sensitivity4-20 mA, HART communicationExplosion-proof modelspage 19HYDROSTATIC LEVEL TRANSMITTERSNIVOPRESS D2-wire compact level andpressure transmitter0.1 bar - 400 barHigh overload capabilityAccuracy: 0.25%Stainless steel diaphragmPlug-in display module4-20 mA, HART communicationExplosion-proof modelspage 24LEVEL TRANSMITTERS9

LEVEL TRANSMITTERSLEVEL TRANSMITTERSHYDROSTATIC LEVEL TRANSMITTERSNIVOPRESS NBYPASS LEVEL INDICATORSNIVOFLIP2 or 3-wire submersible transmitterStainless steel bodyUp to 200 m range4-20 mA, HART communicationAccuracy: 0.25 %Incorporated Pt100 temperature sensorVenting tube in cableIP68 protectionExplosion-proof modelspage 26Operation without power supply500–5500 mm measuring range±10 mm accuracyStainless steel or titan floatOptional strap-on level switchesMax. 100 bar process pressureDIN and ANSI flangesHigh temperature version up to +250°CPED approvalpage 30MAGNETOSTRICTIVE TRANSMITTERSNIVOTRACK2-wire compact andmini compact transmitter0.1 mm or 1 mm resolutionMax. 15 m measurement rangeFor liquids with min. 0.5 kg/dm 3 densityDistance, level and volume measurementRigid or flexible probesOIML R-85 international certificationExplosion-proof modelspage 33ULTRASONIC INTEGRATEDEasyTREK FOR LIQUIDSFor liquid level measurement2-wire integrated transmitterNarrow 5° beam angleMax. 25 m measurement rangePP, PVDF, PTFE transducers32-point linearization4-20 mA, HART communicationOpen channel flow meteringExplosion-proof models, IP68page 39ULTRASONIC INTEGRATEDEasyTREK FOR SOLIDSFor free flowing solid measurement4-wire integrated transmitterNarrow 5° beam angleMax. 60 m measurement rangePP and aluminium sensorsJoystick aiming device4-20 mA, HART communicationExplosion-proof models, IP68ULTRASONIC COMPACTEchoTREK FOR LIQUIDSpage 42For liquid level measurement2- and 4- wire compact transmitterNarrow 5° beam angleMax. 25 m measurement rangePP, PVDF, PTFE and st. st. transducers32-point linearizationPlug-in display module4-20 mA, HART communicationExplosion-proof models, IP68page 44ULTRASONIC COMPACTEchoTREK FOR SOLIDSFor free flowing solid measurement4-wire compact transmitterNarrow 5° beam angleMax. 60 m measurement rangePP and aluminium sensorsJoystick aiming devicePlug-in display module4-20 mA, HART communicationExplosion-proof models, IP68page 5210

LEVEL TRANSMITTERSNON-CONTACT MICROWAVE LEVEL TRANSMITTERSPiloTREKGENERAL DESCRIPTIONThe 25 GHz (K-band) PiloTREK Pulse Radars are regarded the most progressive non-contact level transmitters of the industrial process automation field. Their accuracies are excellentand their short and narrow antennas make their installation simple and low cost. NIVELCO’s new K-band radar featuring ±3 mm accuracy and short dead band excels with its versatilehousing concept lining up plastic, aluminium and stainless steel versions. Its antenna range incorporates stainless steel horn and enclosed plastic tube varieties. The enclosed antennaversions can be replaced without removing the antenna enclosure from the process. Local programming of the PiloTREK is aided by a plug-in display module. If on-site reading is notdesired this module may not be required thus reducing cost of ownership. The signal processing algorithm of the new PiloTREK is based on NIVELCO’s 30 years of experience with noncontactlevel measurement making it an excellent choice for applications simple and challenging alike.LEVEL TRANSMITTERSMAIN FEATURES2-wire K-band Pulse Burst Radar25 GHz frequency23 metre measuring rangefor liquids and slurries± 3 mm accuracyEasy installation due to small antennasHorn and enclosed antenna typesSanitary types for meeting high hygienic requirementsHigh temperature versionPlug-in graphical display moduleEx versionINDUSTRYSEGMENTSWater, wastewaterPower generationFood and beveragePharmaceuticalChemicalAPPLICATIONLiquids and slurries in generalOPERATIONThe operation of the non-contact microwave level transmitters is based on the measurement of the time of flight of the microwave burst. The propagation speed of microwave impulsesis practically the same in air, gases and in vacuum, independently from the process temperature and pressure, so the measured distance is not affected by the physical parameters ofmedium to be measured. The level transmitter induces microwave impulses a few nanoseconds long in the antenna and a part of the energy of the emitted signals is bounced (reflected)back from the measurement surface depending on the measured media. The time of flight of the reflected signal is measured and processed by the electronics, and then this isconverted to distance, level or volume proportional data. The measurability of the level of a specific medium is depending on the signal strength of the reflected microwave impulses.The signal strength of the reflected impulses is considerably depending on the distance to be measured, the relative dielectric constant of the measured medium and the turbulenceof the surface. The relative dielectric constant (ε r ) of the medium should be more than 1.9.ANTENNA TYPESAntenna diameterAntenna typeDN40 mm DN50 mm DN80 mmProcess connection1 ½" BSP / NPT 2" TRICLAMP DN50 pipe coupling 2" BSP / NPT DN80 – DN150 flangesStainless steel (1.4751 / 316 Ti) horn Plastic (PP) enclosure Plastic (PTFE) enclosure 11

LEVEL TRANSMITTERSNON-CONTACT MICROWAVE LEVEL TRANSMITTERSPiloTREKLEVEL TRANSMITTERSTECHNICAL DATAVersion Plastic housing Aluminium housing High temperature versionMeasured valuesFrequency of the measuring signalMeasuring rangeLinearity error (as per EN 61298-2)Minimal beam angleMinimal ε r of the mediumResolutionTemperature error (as per EN 61298-3)Power supply voltageOutputDigital communicationDisplayMeasuring frequencyLevel, Distance; Calculated values: Volume, Mass~25 GHz (K-band)0.2 m – 23 m - (see: special data of the antenna variations)< 0.6 m: ±15 mm; 0.6 - 1 m: ±8 mm;1 - 10 m: ±3 mm; > 10 m: ±0.04% of the measured distance11° (see: special data of the antenna variations)1.9 (depending on the measurement range; see: special data of the antenna variations)1 mm0.05% FSK / 10 °C (-20 °C ... +60 °C)20 V … 36 V DC4-20 mA + HARTSAP-300 graphical display unit10…60 sec as per the application settingsAntenna diameter 38 mm (1 ½"), 48 mm (2"), 75 mm (3")Antenna material Horn: Stainless Steel; enclosure: PP, PTFE Horn: Stainless Steel; enclosure: PTFEMedium temperature-30 ºC … + 100 ºC, (up to 120 ºC for max. 2 min);with PP antenna enclosure: max.: 80 ºC-30 ºC … + 180 ºCMaximal medium pressure 25 bar at 120 ºC; with plastic antenna enclosure: 3 bar at 25 ºCAmbient temperature -20 ºC … +60 ºCProcess connectionThreaded, Flanged or Sanitary connections (as per order codes)Ingress protection IP 67Electrical connection2x M 20 x1.5 cable glands + internal thread for 2x ½” NPT cable protective pipe,cable outer diameter: Ø 7 … Ø 13 mm, wire cross section: max.1.5 mm 2Electrical protectionClass III.Housing material Plastic (PBT) Paint coated aluminiumSealingViton, EPDMApprovalsATEX, IEC Ex, FM (approval is pending)Communication certificationsR&TTE, FCCMass 1 – 1.6 kg 2 – 2.6 kg 3 – 3.6 kgSPECIAL DATA OF THE ANTENNA VARIATIONSType WES/WGS-140/14N WEM/WGM-140/14N WES/WGS-150/15N WEM/WGM-150/15N WEP/WGP-140/14NNameDN40 (1 ½”)stainless steel horn antennaDN50 (2”)stainless steel horn antennaDN40 (1 ½”)PP encapsulated antennaHousing material Paint coated aluminium Plastic (PBT) Paint coated aluminium Plastic (PBT)Process connection 1½" BSP, 1½"NPT 2" BSP, 2" NPT 1½" BSP, 1½" NPTBeam angle 19° 16° Measurement rangeε r = 1.9 ... 4 0.2 m ... 4.5 m 0.2 m ... 7 m ε r = 4 ... 10 0.2 m ... 12 m 0.2 m ... 18 m 0.2 m ... 10 mε r > 10 0.2 m ... 18 m 0.2 m ... 23 m 0.2 m ... 16 mType WHS/WJS-140/14N WHS/WJS-150/15N WHS/WJS-18¨ WES/WGS-18¨NameHigh temperature typeDN40 (1 ½”) stainlesssteel horn antennaHigh temperature typeDN50 (2”) stainlesssteel horn antennaHigh temperature typeDN80 (3”) stainless steelhorn antenna with flangeHousing materialPaint coated aluminiumProcess connection 1½” BSP, 1½”NPT 2” BSP, 2” NPT DN80 – DN150 flangesBeam angle 19° 16° 11°Measurement rangeε r = 1.9 ... 4 0.2 ... 4.5 m 0.2 ... 7 m 0.2 ... 15 mε r = 4 ... 10 0.2 ... 12 m 0.2 ... 18 m 0.2 ... 23 mε r > 10 0.2 ... 18 m 0.2 ... 23 m 0.2 ... 23 mDN80 (3”) stainless steelhorn antenna with flange12

LEVEL TRANSMITTERSNON-CONTACT MICROWAVE LEVEL TRANSMITTERSPiloTREKSPECIAL DATA OF THE ANTENNA VARIATIONSType WES/WGS-140/14N WEM/WGM-140/14NAntenna enclosureNameWAP-140-0 /WAP-14N-0DN40 (1 ½”) antennawith PP antenna enclosureWAT-14T-0 WAT-14R-0 WAT-14T-0 WAT-14R-0Sanitary typeDN40 (1 ½”) antenna with PTFE antenna enclosureHousing material Paint coated aluminium Plastic (PBT)Process connection 1½” BSP, 1½”NPT 2” TRICLAMP DN50 pipe coupling 2” TRICLAMP DN50 pipe couplingMeasurement rangeε r = 4 ... 10ε r > 100.2 m ... 10 m0.2 m ... 16 mLEVEL TRANSMITTERSType WEP-150/15N WES/WGS-150/15N WHS/WJS-140/14NAntenna enclosure WAP-150-0 / WAP-15N-0 WAT-14R-0NameDN50 (2”) antennawith PP antenna enclosureHigh temperature, sanitary typeDN40 (1 ½”) antenna withPTFE antenna enclosureHousing material Plastic (PBT) Paint coated aluminiumProcess connection 2" BSP, 2" NPT 2" TRICLAMPMeasurement rangeε r = 4 ... 10 0.2 m ... 16 m 0.2 m ... 10 mε r > 10 0.2 m ... 20 m 0.2 m ... 16 mPOLARIZATIONThe PiloTREK non-contact level transmitters emit linearly polarized microwave impulses. The polarization plane of the emitted impulses can be rotated by 360° in case ofW Sand W Mtypes. The rotation of the polarization plane can minimize unwanted false reflections from disturbing objects or from the tank wall. The orientation of the polarizationplane coincides with the line drawn between the cable glands.PROGRAMMING, ECHO MAPWith the help of the SAP-300 plug-in display a simplified full-parameter programmingcan be accomplished, the parameters of measurement and output can be set using thetext-based menu system.The large LCD dot-matrix displaydisplays the measured values innumerical and bar graph form.The Echo Map feature helps to detectfalse reflections and aids theoptimization of the measurementconfiguration.BACKGROUND MAPPINGThe background mapping feature provides excellent solution to ignore unwantedfalse reflections coming from (not-moving) disturbing objects. For this purposethe instrument needs to map the totally empty tank to create a ”backgroundimage”. Then the measurement evaluation software of PiloTREK will automaticallyrecognise and ignore the false reflections coming from the disturbing objectsinside the tank.MOUNTINGTo avoid unwanted multiple reflections the instrument should not be mounted in the middleof the tank or in the vincinity of the filling place or the outlet of the tank. The ideal positionfor the PiloTREK is on the r = (0.3 … 0.5) R in case of cylindrical tank. The distancebetween the sensor and the tank wall should be at least 200 mm.The mounting placement should be as far as possible from the disturbing objects insidethe tank and from the sources of disturbing effects such as waving, vortex or strong vibrations.The antenna face should be parallel to the medium surface within ± 2-3°.To avoid overheating the instrument should be protected against direct sunshine.13

LEVEL TRANSMITTERSNON-CONTACT MICROWAVE LEVEL TRANSMITTERSPiloTREKLEVEL TRANSMITTERSPiloTREK W, with horn antenna2-wire compact radar level transmitterHousing: aluminium or plasticOutput: 4-20 mA + HARTPower supply: 24 V DCAntenna sealing: FPMIngress protection: IP67Ex marking: ATEX x II Ex ia II CTypeBase price in HRKWXX 1XX X 8 160,00VersionAdd on price in HRKW X 1XX XE Transmitter 0,00G Transmitter with LCD display 544,00H* High temperature transmitter (max. 180°C) 850,00J * High temperature transmitter with LCD display (max. 180°C) 1 390,00PiloTREK WES-140Antenna / Housing materialAdd on price in HRKWX 1XX XP** PP / Plastic housing (PBT glass fibre reinforced) 0,00M 1.4571 / Plastic housing (PBT glass fibre reinforced) 1 470,00S 1.4571 / Aluminium housing (paint coated) 1 620,00Antenna / Connection sizeAdd on price in HRKWXX 1 X X4 Horn DN40 / 1 1/2", only with threaded connection 0,005 Horn DN50 / 2", only with threaded connection 204,008 Horn DN80 / only with flange 298,00Process connectionAdd on price in HRKWXX 1X X0 BSP 0,00N NPT 0,002 DN80 PN25 1.4571 flange 1 870,003 DN100 PN25 1.4571 flange 2 810,006 DN80 PN25 PP flange 234,007 DN100 PN25 PP flange 271,00A 3" RF 150 psi 1.4571 flange 1 870,00B 4" RF 150 psi 1.4571 flange 2 810,00E 3" RF 150 psi PP flange 234,00F 4" RF 150 psi PP flange 271,00PiloTREK WEP-140Output / ExAdd on price in HRKWXX 1XX4 4-20 mA + HART 0,008 4-20 mA + HART / Ex ia *** 1 260,00W 1 * High temperature version can be ordered only with aluminium housing** The P versions are available only with threaded process connection and DN40, DN50 antenna diameter*** Approval is pendingAccessories to orderTypePrices in HRKWAP 1 4 0 0 PP antenna enclosure with 1 1/2" BSP process connection for340,00DN40 antennaPiloTREK WHS-140 + WAT-14TWAP 1 4 N 0 PP antenna enclosure with 1 1/2" NPT process connection for340,00DN40 antennaWAP 1 5 0 0 PP antenna enclosure with 2" BSP process connection for DN50 425,00antennaWAP 1 5 N 0 PP antenna enclosure with 2" NPT process connection for DN50 425,00antennaWAT 1 4 T 0 PTFE antenna enclosure with 2" TriClamp process connection for 1 390,00DN40 antennaWAT 1 4 R 0 PTFE antenna enclosure with DN50 Pipe coupling process1 590,00connection for DN50 antennaS A P 3 0 0 Display unit (see "Transmitter accessories") 544,00S A T 3 0 4 HART-USB modem (see "UNICOMM modules") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2 090,00S A K 3 0 5 6 HART-USB/RS485 modem / Ex ia 2 280,00S A S 3 0 3 EView 2 software package for max. 15 transmitters 5 140,00 NIV24(see "Transmitter accessories")WES-140-414

LEVEL TRANSMITTERSGUIDED MICROWAVE LEVEL TRANSMITTERSMicroTREKGENERAL DESCRIPTIONThe MicroTREK guided microwave level transmitter is designed for continuous level measuring of conductive or nonconductive liquids, pulps and solids. MicroTREK level gauge operates based on the well known TDR (Time DomainReflectometry) principle. Micropulses are sent along a probe guide at the speed of light. As soon as the pulse reaches thesurface of the medium, it is reflected back to the electronic module. Level distance is directly proportional to the flighttime of the pulse. The reflected signal is dependent on the dielectric constant of the material, the feasibility of themeasurement is εr>1,4. The TDR technology is unaffected by the properties of the medium as well as that of the spaceabove it. Measurement is also unaffected by the change in the physical properties of the materials such as temperature,pressure, dielectric constant.LEVEL TRANSMITTERSMAIN FEATURESMeasuring range up to 24 mAccuracy: ± 5 mmMeasurement is independent ofdielectric constant, temperature,pressure and density variationsRod, cable and coaxial probesMinimum 1,4 ≥ εr2-wire versionGraphic display4-20 mA + HART outputMedium temperature range: –30°C … +200°CMaximum process pressure: 40 barIP 65 protectionCERTIFICATIONSATEX II 1G Ex ia IIC T6…T3ATEX II 1G Ex ia IIB T6…T3ATEX II 1D iaD A20/A21 IP65 T100°CIEC Ex ia IIC T6…T3 GaIEC Ex ia IIB T6…T3 GaIEC Ex ia IIIC T100°C DaHHA-400HTK-400SAP-300 graphic displayAPPLICATIONSMono Cable / Mono Rod Twin cable Twin rod Coaxial pipeCement, limestone, fly ash,alumina, carbon blackAll high-viscosity liquidsMineral powders, freeflowing solidsClean and contaminatedliquidsFor stilling wells(calibration required)Aggressive mediums withcoated probesSlightly conductive foamsHigh temperatureapplicationsBypass applicationsTank parks with solvents, oilor fuelsWater storage tanksPlastic granulesFor liquids with lowdielectric constant(ε r > 1.8)Light granulesWhere minimumdead-zone is neededFor narrow tanksFor solids with lowdielectric constant(ε r > 1.8)Mounting close to tank wallis possiblePlastic granule vesselsCoated tanksClean and contaminatedliquidsFine powdersWhere minimumdead-zone is neededFor narrow tanksFor mediums with lowdielectric constant,and slightly flowingproductsSmall vessels or tanksSolvents, liquefied gasesLPG, LNGFor clean liquids with lowdielectric constantAgitated or flowing liquids -the probe acts as a stilling wellLiquid or vapour spray nearthe probeHigh temperature applications -probe can be heatedContact possible with metallicobject or tank wall withoutmeasurement uncertainty.Where no dead zone allowed15

LEVEL TRANSMITTERSGUIDED MICROWAVE LEVEL TRANSMITTERSMicroTREKLEVEL TRANSMITTERSTECHNICAL DATAGeneral dataInputdataProbe typesHousingMeasuredvaluesMedium temperatureMedium pressureMeasuring rangeDistance, level, volumeDepends on the probe type and dielectric constant of the measured mediumCoaxial, twin cable, mono cable, twin rod and mono rodPaint coated aluminium or plastic PBT-30 °C ... +200 °C, (Ex), other temperature ranges for non-Ex versions on requestFlange temperature: -30 °C ... +90 °C, for high temperature versions +200 °C- 0.1 … 1.6 MPa (- 1…16 bar); maximum allowed pressure on 20°C with 1.4571 (stainless steel) flange 4 MPa (40 bar)Ambient temperature -30 °C … +60 °C, with display: -20 °C … +60 °CSealingIngress protection IP 65Power supplyOutputdataOutputsignalsAccuracy*ResolutionElectrical connectionElectrical protectionMass(housing)FPM (Viton ® ), for high temp versions optional Perfluoroelastomer (Kalrez ® ), EPDM18 – 35 V DC, protected against surge transientsAnalogue: 4 – 20 mA, (3.9 – 20.5 mA) passive output, error indication 22 mADigital: HART® interface, terminal resistor maximum 250 OhmDisplay: SAP-300 LCD dot-matrixFor liquids: ± 5 mm, if probe length L 10 m, 0.05 % of the probe lengthFor solids: ± 20 mm , if probe length L 10 m, 0.2 % of the probe length± 3 μA2 x M20x1.5 metal cable gland (Ex version), cable diameter: Ø 7…13 mm, or M20x1.5 plastic cable gland, cable diameter: Ø 6…12 mmwire cross section: 0.5 … 1.5 mm 2 (shielded cable suggested), 2 x NPT 1/2"Class III.1.5 kg* Under ideal reflecting surface and constant temperature conditions.Additional data for the Ex approved modelsEx markingATEX II 1G Ex ia IIC T6 … T3 ; coated probe versions: II 1G Ex ia IIB T6 … T3 ; II 1D iaD A20/21 IP 65 T100°CIEC ExIntrinsically safe dataEx power supply, loadMedium temperature -30 °C ... +200 °CEx ia IIC T6…T3 Ga, Ex ia IIB T6…T3 Ga, Ex ia IIIC T100°C Da (–30°C T amb +60°C)Ci 10 nF, Li 10 μH, Ui 30 V, Ii 150 mA, Pi 1 WEx transmitters should be powered with Ex ia power supplyUo < 30 V, Io < 150 mA, Po < 1 W, Supply range 18 V … 20 V, Rt max = (Ut - 12 V) / 0.02 AAmbient temperature -30 °C …+60 °C, with display: -20 °C … +60 °CMEASURABILITY OF THE MEDIUMThe measurability of the medium andthe reflected signal strength depends onthe relative dielectric constant of themediumInformative εr valuesButane 1.4 Diesel oil 2.1–4Cement 1.5-10 Grain 3-5PB 1.6-1.9 Limestone 6.1-9.1Kerosene 2.1 Sulphuric acid 20Crude oil 2.1 Acetone 21Whiting powder 2.2-2.5 Ethanol 24Benzene 2.3 Methanol 33.1Asphalt 2.6 Glycol 37Clinker 2.7 Nitrobenzene 40Resin 3.6 Water 8016

LEVEL TRANSMITTERSGUIDED MICROWAVE LEVEL TRANSMITTERSMicroTREKPROBE SELECTIONReliable microwave measurement depends on the correct selection of probes taking into consideration the properties of the mediumand other technologic conditions.Probe typeMax.measuringrange (m)Upper (t) / lower (b)(mm) εr = 80Dead zone*Upper (t) / lower (b)(mm) εr = 2,4Process connectionMono cable Ø 4 mm1"; 1 1/2 "24Mono cable Ø 8 mm 1 1/2 "300/20 400/100Mono rod Ø 8 mm 3 1"Mono rod Ø 14 mm 6Twin cable Ø 4 mm 24Twin rod Ø 8 mm 3min.εr1 1/2 "150/20 300/100 1,8Coaxial pipe Ø 28 mm 6 0/10 0/100 1"; 1 1/2 " 1,4Coated cable Ø 6 mm 241"; DN40 Triclamp;300/20 400/100DN40 Milch, DN50 2,4Coated rod Ø 12 / 16 mm 3 DN50* the unmeasurable upper and lower part of the tank, the lower dead zone is extended with the length of the counterweight (cable versions only)2,1LEVEL TRANSMITTERSTECHNICAL DATA OF THE PROBESTypeHoK, HoLHoV, HoW HoR, HoP HoS, HoZ HoN, HoJ HoT, HoU HoD, HoE HoA, HoBHoC, HoHDenomin. Cable Rod Rod Cable Twin cable Twin rod CoaxialMax. meas. dist. 24 m 3 m 6 m 24 m 3 m 6 mMin. meas. dist.ε r =80 / ε r = 2,40.3 m / 0.4 m 0.15 m / 0.3 m 0 mMinimal medium ε r 2.1 1.8 1.4Min. dist. to objects Ø 600 mm Ø 200 mm Ø 0 mmProcess1” BSP; 1”NPT 1” BSP 1 1/2 ” BSP 1” BSP; 1”NPTconnection1 1/2 ” BSP; 1 1/2 ” NPT 1”NPT 1 1/2 ” NPT 1 1/2 ” BSP; 1 1/2 ” NPTProbe material 1.4401 1.4571 1.4401 1.4571Probe nominal Ø 4 mm 8 mm 14 mm 8 mm 4 mm 8 mm 28 mmMass 0.12 kg/m 0.4 kg/m 1.2 kg/m 0.4 kg/m 0.24 kg/m 0.8 kg/m 1.3 kg/mSeparator material* –PFA, weldedon the cablePTFE-GF25PTFEWeight dimensions Ø 25x100 mm – Ø 40x260 mm Ø 40x80 mm –Weight material 1.4571 – 1.4571 –* there is no separator below 1.5 m lengthTECHNICAL DATA OF THE COATED PROBESType HoF, HoG HoX HoY HoM HoQ HoIDenomination FEP coated cable PFA coated rod PP coated rodMax. meas. distance 24 m 3 mMin. meas. distance ε r =80 / ε r = 2,40.3 m / 0.4 mMinimum medium ε r 2.4Min. dist. to objectsØ 600 mmProcess connection 1” BSP; 1”NPT DN 40 Triclamp DN 40 Milch DN 50 PN40Max medium temperature +150 °C +60 °CProbe material 1.4401 1.4571Probe coating material FEP PFA PPProbe nominal Ø 6 mm 12 mm 16 mmFillet and weight coating material – PFA PFA PPWeight material 1.4571 –Mass 0.16 kg/m 0.5 kg/m 0.6 kg/m17

LEVEL TRANSMITTERSGUIDED MICROWAVE LEVEL TRANSMITTERSMicroTREKLEVEL TRANSMITTERSMicroTREK H-400/H-5002-wire TDR level transmitter for liquids and free-flowing solids with stainless steel probewith or without plastic coating; Measuring range up to 24 mOutput: 4-20 mA with HART (HART configuration software is provided free of charge)Accuracy for liquids: 5 mm for L < 15 m (5 mm 0,05% for L 15 m)Accuracy for powder and bulk solids: 20 mm for L < 15 m (20 mm 0,05% for L 15 m)Power supply: 18-35 V DCPressure rating: 40 bar (may be restricted by the pressure rating of the used flange)Enclosure of electronics: IP65 / NEMA 4Sealing: FPM as standard (EPDM or FFKM available on request)Ex marking: ATEX x II 1G Ex ia II C T6…T3 or Ex ia II B T6…T3 (for plastic coated version)ATEX x 1D iaD A20/A21 IP 65 T100°CTypeBase price in HRKHXX XXX X 7 210,00Version / TemperatureAdd on price in HRKH X XXX XT Transmitter / Flange temperature max. 90°C 0,00H Transmitter / Flange temp. max. 200°C (with St. St. probe only) 417,00B Transmitter with local LCD indicator / Flange temperature max. 90°C 544,00PTransmitter with local LCD indicator / Flange temp. max. 200°C (with St. St.961,00probe only)Probe / Process connectionAdd on price in HRKHX XXX XR Mono rod, 1.4571 / 1" BSP / max. 3 m 0,00S Mono rod, 1.4571 / 1 1/2" BSP / max. 6 m 0,00P Mono rod, 1.4571 / 1" NPT / max. 3 m 0,00Z Mono rod, 1.4571 / 1 1/2" NPT / max. 6 m 0,00K Mono cable, Ø4 mm, 1.4401 / 1" BSP / max. 24 m 213,00L Mono cable, Ø4 mm, 1.4401 / 1" NPT / max. 24 m 213,00N Mono cable, Ø8 mm, 1.4401 / 1 1/2" BSP / max. 24 m 1 260,00J Mono cable, Ø8 mm, 1.4401 / 1 1/2" NPT / max. 24 m 1 260,00T Twin cable, 2x Ø4 mm, 1.4401 / 1 1/2" BSP / max. 24 m 1 260,00U Twin cable, 2x Ø4 mm, 1.4401 / 1 1/2" NPT / max. 24 m 1 260,00A Coaxial, 1.4571 / 1" BSP / max. 6 m 1 260,00B Coaxial, 1.4571 / 1" NPT / max. 6 m 1 260,00D Twin rod, 1.4571 / 1 1/2" BSP / max. 3 m 1 260,00E Twin rod, 1.4571 / 1 1/2" NPT / max. 3 m 1 260,00F Mono cable, Ø4 mm, + FEP coated / 1" BSP / max. 24 m 383,00G Mono cable, Ø4 mm, + FEP coated / 1" NPT / max. 24 m 383,00X Mono cable, Ø4 mm, + FEP coated / Triclamp 1 1/2" / max. 24 m 723,00Y Mono cable, Ø4 mm, + FEP coated / Sanitary DN40 / max. 24 m 1 140,00Q Mono rod + PFA coated / DN50, PN25, 1.4571+PFA lining 4 450,00I Mono rod + PP coated / DN50, PN25, 1.4571+PP lining 3 780,00M Mono cable, Ø4 mm, + PFA/FEP coated / DN50, PN25, 1.4571+PFA/FEP lining 4 450,00HousingAdd on price in HRKHXX XX X4 Aluminium (paint coated) 140,005 Plastic PBT, glass fibre reinforced (Ex version not available; HT, HB only) 0,00Probe lengthAdd on price in HRKHXX X X1 0 - 3 0 1.0-3.0 m (each 0.1 m) For mono rod, 1.4571 17,001 0 - 3 0 1.0-3.0 m (each 0.1 m) For mono rod, PP coated 93,501 0 - 3 0 1.0-3.0 m (each 0.1 m) For mono rod, PFA coated 119,000 1- 2 4 1.0-24.0 m (each 1 m) For mono cable, Ø 4 mm, 1.4401 32,300 1- 2 4 1.0-24.0 m (each 1 m) For mono cable, Ø 8 mm, 1.4401 100,000 1- 2 4 1.0-24.0 m (each 1 m) For twin cable, 1.4401 187,001 0 - 6 0 1.0-6.0 m (each 0.1 m) For coaxial, 1.4571 37,401 0 - 3 0 1.0-3.0 m (each 0.1 m) For twin rod, 1.4571 34,000 1- 2 4 1.0-24.0 m (each 1 m) For mono cable, Ø 4 mm, 1.4401 + FEP 158,00Output / ApprovalAdd on price in HRKHXX XXX4 4-20 mA + HART / none 0,006 4-20 mA + HART / ATEX x 1/2 D 1 260,008 4-20 mA + HART / ATEX x II 1G Exia 1 260,00H Available on request:S A P 3 0 0 Display 544,00various process connections (price information on request) DIN and ANSI flangesspecial sealingsAdd on price in HRK EPDM 0,00 FFKM 2 080,00The above process connections and special sealings should be ordered separatelyand should be specified in the text part of the order.Non-standard, customized 4-20 mA output calibration 213,00HTK, HTL, HTV, HTWHTS, HTZHTN, HTJHTR, HTPHTA, HTBHTT, HTUPrice on request for H_V, H-W, H_C, H_HNeed of IEC is to be specified with order18

LEVEL TRANSMITTERSCAPACITIVE LEVEL TRANSMITTERSNIVOCAPGENERAL DESCRIPTIONNIVOCAP 2-wire capacitive level transmitters provide an ideal solution for level measurement of conductive or non-conductive liquids.The probe of the instrument and the reference probe (which can be either the metal wall of the tank or installed separately) operateas opposing plates of a capacitor. Between the plates of this capacitor the air is replaced by a medium with greater dielectric constantthan the air during filling the tank, therefore the capacitance is changing directly proportional to the level. The incorporated electroniccircuitry measures the capacitance difference and converts it to an output signal proportional to level.LEVEL TRANSMITTERSMAIN FEATURESMaximum 20 m measurement rangeVertical mountingRod or cable probe versions-30…+200°C medium temperatureMax. 40 bar medium pressure32 point linearization tableIndirect assignment of 0% and 100%4-20 mA + HART outputEx versionIP 67 protectionAPPLICATIONSLevel and volume measurementLevel measurement of conductive andnon-conductive materialsLevel measurement of liquidsFor high pressure andhigh temperature mediumsCERTIFICATIONSATEXII 1G EEx ia IIB T6CHR-200CFR-100CTR-300CTK-200MEASUREMENT ARRANGEMENTSpartlyinsulatedprobeCoaxial reference probeweightRod probeMetal tank and non-conductive medium.The rod probe is insulated partlyat the process connection.Rod probeWith coaxial tube reference probeRob probeWith reference rod probeCable probe with weightMetal tank19

LEVEL TRANSMITTERSCAPACITIVE LEVEL TRANSMITTERSNIVOCAPLEVEL TRANSMITTERSTECHNICAL DATAVersion Rod probe High temp. rod probe Cable probeMeasurement range (L N ) 0.2 – 3 m 1 – 20 mCapacitance range0 pF…5 nFMin. capacitance changeMax. (I out ) SPAN: 10 pF or 10% FS then graterSaturation capacitanceof the insulated probeRelative dielectric constant ε r min. 1.5~600 pF/m ~200 pF/mProcess connectionMaterial ofwetted partsHousing materialAs per order codesThreaded part stainless steel DIN 1.4571Probe Fully or partially PFA coated stainless steel (DIN 1.4301) Fully FEP coated steel cablePaint coated aluminium or plastic (PBT)Medium temperature –30°C … +130 °C –30°C … +200 °C –30°C … +130 °CAmbient temperature –25°C … +70 °CMedium pressure max. 4 MPa (40 bar) max. 1.6 MPa (16 bar)Power supply / consumptionOutputdataElectrical connectionElectrical protectionIngress protectionOutput signalsDamping timeLinearity errorTemperature error12 – 36 V DC / max. 800 mW, overvoltage protection against transientsAnalogue: 4…20 mA (3.9…20.5 mA) R max = U t -11.4 V/0.02AError indication: 3.8 mA or 22 mADigital: HARTDisplay module: SAP-202, 6 digit LCD, dimensions, bargraphCurrent loop test: 10 mV / 1 mA via resistor in series0, 3, 6 … 300 sec selectable±0.3% FS±0.02% /°C FS2 x M20x1.5 plastic cable glands, for cable: Ø6-12 mm, Ex version: 2 x M20x1.5 metal cable glands cable: Ø7-13 mm,wire cross section: 0.5…1.5 mm 2 (shielded cable is recommended) 2 x NPT ½” internal thread for protective pipeClass III.IP67Mass 2.5 kg 0.5 m probe 3 kg 0.5 m probe 2 kg 3 m probeSPECIAL DATA FOR Ex CERTIFIED MODELSProtection typeiaEx marking ATEX II 1G EEx ia II B T6Intrinsically safe dataApplicable Ex power supplyC i 15 nF; L i 200 μH; U i 30 V; I i 140 mA; P i 1 WU 0 < 30 V; I 0 < 140 mA; P 0

LEVEL TRANSMITTERSCAPACITIVE LEVEL TRANSMITTERSNIVOCAPNIVOCAP C, rod probe2-wire rod probe capacitance level transmitter for conductive and non-conductive liquidsStainless steel process connectionPower supply: 12-36 V DCProbe lengths: 0.2-3.0 mEx marking: ATEX x II 1 G EEx ia IIB T6ProgrammingWith 4 buttons: 4/20 mA (with real level), error indication and damping timeWith SAP-202 programmer: complete programming, 32-point linearisationRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.LEVEL TRANSMITTERSTypeBase price in HRKC XX XXX X 3 260,00Version / Max. temperatureAdd on price in HRKC X XXX XT Transmitter / 130°C 0,00B Transmitter with local LCD indicator / 130°C 439,00H Transmitter / 200°C 511,00P Transmitter with local LCD indicator / 200°C 950,00Process connection size / InsulationAdd on price in HRKC X XXX XR 1" BSP / Fully PFA insulated stainless steel 0,00P 1" BSP / Partially PFA insulated stainless steel 0,00A 1" NPT / Fully PFA insulated stainless steel 0,00C 1" NPT / Partially PFA insulated stainless steel 0,00NIVOCAP CTR-2HousingAdd on price in HRKC XX XX X2 Aluminium (paint coated) 140,003 Plastic, PBT, glass fibre reinforced 0,00Probe lengthAdd on price in HRKC XX X XFully PFA insulated0 2 0.2 m 0,000 3 - 3 0 0.3-3 m; each started 100 mm 37,40Partially PFA insulated0 2 0.2 m 0,000 3 - 3 0 0.3-3 m; each started 100 mm 17,90Output / ApprovalAdd on price in HRKC XX XXX2 4-20 mA / none 0,004 4-20 mA + HART / none 688,006 4-20 mA / Ex (only 130°C rated version) 748,008 4-20 mA+ HART / Ex (only 130°C rated version) 1 440,00NIVOCAP CHR-2C Available on request: special process connectionsAdd on price in HRK 1 1/2" Triclamp (ISO 2852) 354,00 2" Triclamp (ISO 2852) – X07 383,00 DN 40 Pipe coupling (DIN 11851) 757,00 DN 50 Pipe coupling (DIN 11851) – X12 835,00Accessories to orderTypePrices in HRKS A P 2 0 2 Plug-in display module (See "Electronic accessories") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00S AK 3 0 5 6 HART-USB/RS485 modem / Exia 2280,0021

LEVEL TRANSMITTERSCAPACITIVE LEVEL TRANSMITTERSNIVOCAPLEVEL TRANSMITTERSNIVOCAP C, coaxial reference probeFor use with NIVOCAP rod probe type transmittersProcess connection: 11/2"Internal process connection for NIVOCAP: 1” BSPMaterial: stainless steelProbe length: 0.2-3 mTypeBase price in HRKC XF 1XX 646,00Connection typeAdd on price in HRKC F 1XXA BSP 0,00D NPT 0,00Probe lengthAdd on price in HRKC XF 102 0.2 m 0,0003 - 3 0 0.3-3 m; each started 0.1 m 34,00NIVOCAP CAF-1C F 1NIVOCAP C, reference rod probeReference rod probes for NIVOCAP rod probe capacitance transmittersProbe length: 0.2-3 mTypeBase price in HRKC XX 1XX 703,00Connection typeAdd on price in HRKC X 1XXF BSP 0,00E NPT 0,00Connection size / InsulationAdd on price in HRKC X 1XXR 1" / Fully PFA insulated stainless steel 0,00P 1" / Partially PFA insulated stainless steel 0,00Probe lengthAdd on price in HRKC XX 1Fully PFA insulated0 2 0.2 m 0,000 3 - 3 0 0.3-3 m; each started 100 mm 37,40Partially PFA insulated0 2 0.2 m 0,000 3 - 3 0 0.3-3 m; each started 100 mm 17,90NIVOCAP CFP_C 122

LEVEL TRANSMITTERSCAPACITIVE LEVEL TRANSMITTERSNIVOCAPNIVOCAP C, cable probe2-wire capacitance level transmitter with cable probe for liquidsStainless steel process connectionPower supply: 12-36 V DCProbe length: 1-20 mEx marking: ATEX x II 1 G EEx ia IIB T6ProgrammingWith 4 buttons: 4/20 mA (with real level), Error indication and Damping timeWith SAP-202 programmer: Complete programming, 32-point linearisationRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.LEVEL TRANSMITTERSTypeBase price in HRKC XX XXX X 3 590,00Version / Max. temperatureAdd on price in HRKC X XXX XT Transmitter / 130°C 0,00B Transmitter with local LCD indicator / 130°C 439,00Process connection / Cable typeAdd on price in HRKC X XXX XK 1" BSP / Fully FEP insulated steel 0,00L 1" BSP / Partially FEP insulated stainless steel 0,00E 1" NPT / Fully FEP insulated steel 0,00G 1" NPT / Partially FEP insulated stainless steel 0,00NIVOCAP CTK_HousingAdd on price in HRKC XX XX X2 Aluminium (paint coated) 140,003 Plastic, PBT, glass fibre reinforced 0,00Probe lengthAdd on price in HRKC XX X XFully FEP insulated0 1 1 m 0,000 2 - 2 0 2-20 m; each started 1 m 112,00Partially FEP insulated0 1 1 m 0,000 2 - 2 0 2-20 m; each started 1 m 37,40Output / ApprovalAdd on price in HRKC XX XXX2 4-20 mA / none 0,004 4-20 mA + HART / none 688,006 4-20 mA / Ex ia 748,008 4-20 mA+ HART / Ex ia 1 440,00C Accessories to orderTypePrices in HRKCTK-103-0M-400-01 St.st. counterweight Ø 30x150 mm (Discount class: 3) 392,00S A P 2 0 2 Plug-in display module (See "Electronic accessories") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00S AK 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00NIVOCAP CTK-103-0M-400-0123

LEVEL TRANSMITTERSHYDROSTATIC LEVEL AND PRESSURE TRANSMITTERSNIVOPRESS DLEVEL TRANSMITTERSGENERAL DESCRIPTIONNIVOPRESS D hydrostatic level- and pressure transmitters operate in 2-wire systems and convert relative or absolute pressure (input signal) into 4…20 mA (output signal).The piezoresistive sensor measures the hydrostatic pressure and it compares the water head with the actual atmospheric pressure. The sensor is protected by a stainless steel flushdiaphragm which transfers the pressure value to the piezoresistive sensor through silicon oil. Intelligent electronics provides on-site programming with SAP-200 plug-in displayor remote programming with HART communication. Intrinsically safe (Ex ia approved) models are available for use in hazardous environments.NIVOPRESS D hydrostatic gauge pressure transmitters are suitable for level- and pressure measurement tasks in tanks, vessels and pipes especially in food and beverages industry(for example milk and any other food dollops) applications. The flat surface of the diaphragm avoids the risk of material build up and the maximum medium temperature of 125 °Callows proper (CIP) cleaning required by the regular cleaning processes of the food industry and similar hygienic applications.MAIN FEATURES0,25% accuracyGauge or absolute pressure transmitterPiezoresistive sensor withstainless steel diaphragmWide pressure range selectionTemperature compensationHART communicationPlug-in displayWide variety of process connectionsIP 65 protectionEx versionAPPLICATIONSLiquids and masses in tanks and vesselsGas pressure measurementChemicals with dense vapour or gaslayers above the surfaceFoaming liquidsViscous or corrosive materialsCERTIFICATIONSATEXII 1G EEx ia IIC T6…T4TECHNICAL DATATypeMeasured process valueSensorMeasurement rangeMaximum pressureNIVOPRESS Dlevel, pressurePiezoresistive sensor, with protection front diaphragmAs per order codesAs per order codesTurndown ratio 1 : 2Zero point offsetOutputDamping timeError indicationMaximum loadDisplay modulePower supply (for standard version)Intrinsically safe dataAccuracy (linearity error,hysteresis: repeatability error)50% of measurement range4 … 20 mA, HART4…20 mA (limit values: 3.9…20.5 mA)HART (minimum loop resistance: 250 ohm)0 … 30 s, adjustable3.8 mA or 22 mARt = (Ut – 12 V) / 0,02 A, Ut = supply voltage6-digit plug-in LCD display, units and bargraph12 … 36 V DCU max : 30 V, I max : 140 mA, P max : 1W, C i < 10 nF, L i < 200 μHp > 0.4 bar ± 0.25 %p 0.4 bar ± 0.5 %Range of temperature compensation 0 °C … 70 °C P 0.4 bar: 0 °C … 50 °CAmbient temperature -40 °C … +70 °C, with display: -25 °C … +70 °CMedium temperature -25 °C … +125 °CElectrical protectionClass III.Ingress protection IP 65Ex marking ATEX II 1 G EEx ia IIC T6 … T4Process connectionElectrical connectionAs per order codesM20x1.5 cable gland,outer cable diameter: Ø6 … Ø12 mm,wire cross section: max. 1.5 mm 2HousingPaint coated aluminium or plastic (PBT)Protection diaphragm: stainless steel DIN 1.4435Process connection: stainless steel DIN 1.4435Material of wetted partsSealing: VITON ® p < 100 barNBRp > 100 barEPDMon special requestPressure transmitting mediumSilicon oil*MassAluminium housing 2 kg; ; Plastic housing: 1.6 kg* Food industry compatible oil on special requestDT-500SAP-203 display24

LEVEL TRANSMITTERSHYDROSTATIC LEVEL AND PRESSURE TRANSMITTERSNIVOPRESS DNIVOPRESS D-500/D-6002-wire programmable hydrostatic pressure level transmitter with flush diaphragmFully temperature compensatedAccuracy: < 0.25% (p< 0,4 bar: 0,5 %)Wetted parts stainless steel (DIN 1.4435)Housing: aluminium or plastic with IP67 / NEMA 6Power supply: 10-36 V DCEx marking: ATEX x II 1 G EEx ia IIC T6…T4ProgrammingWith SAP-203 programmer: complete programmingRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of chargeTypeBase price in HRKD XX XX 1 X 4 580,00VersionAdd on price in HRKD X XX 1 XT Transmitter 0,00B Transmitter with local LCD indicator 439,00Process connectionAdd on price in HRKD X XX 1 XC 1/2” BSP (p>2,5 bar) (Ex version not available) 0,00E 1” BSP (p1 bar) 0,00S 1" NPT (p1 bar) 0,00F 1 1/2” BSP 140,00T 1 1/2" NPT 140,00L 1" Triclamp (ISO 2852) 299,00M 1 1/2" Triclamp (ISO 2852) 374,00N 2" Triclamp (ISO 2852) 449,00O DN 25 Pipe coupling (DIN 11851) 439,00P DN 40 Pipe coupling (DIN 11851) 542,00R DN 50 Pipe coupling (DIN 11851) 561,00HousingAdd on price in HRKD XX X 1 X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre 0,00Range (gauge) / OverpressureAdd on price in HRKD XX X 1 X0 - 1 – 0 bar / 3 bar 408,001 0 – 0.16 bar / 0,5 bar (with min. 1 1/2" process connection) 0,002 0 – 0.25 bar / 1 bar (with min. 1 1/2" process connection) 0,003 0 – 0.4 bar / 1 bar (with min. 1 1/2" process connection) 0,004 0 – 0.6 bar / 3 bar (with min. 1 1/2" process connection) 0,005 0 – 1 bar / 3 bar (with min. 1" process connection) 0,006 0 – 1,6 bar / 6 bar (with min. 1" process connection) 0,007 0 – 2.5 bar / 6 bar 0,008 0 – 4 bar / 20 bar 0,009 0 – 6 bar / 20 bar 0,00A 0 – 10 bar / 20 bar 0,00B 0 – 16 bar / 60 bar 0,00C 0 – 25 bar / 60 bar 0,00D 0 – 40 bar / 100 bar 0,00E 0 – 60 bar / 120 bar 0,00F 0 – 100 bar / 250 bar 0,00G 0 – 160 bar / 500 bar 0,00H 0 – 250 bar / 500 bar 0,00J 0 – 400 bar / 600 bar 0,00Output / ApprovalAdd on price in HRKD XX XX 12 4-20 mA / none 0,004 4-20 mA + HART / none 688,006 4-20 mA / Ex 187,008 4-20 mA + HART / Ex 875,00D 1 Service to orderCustomised 4-20 mA output calibration for ranges other than ranges abovePrice in HRK150,00Accessories to orderPrices in HRKS A P 2 0 3 Plug-in display module (See "Electronic accessories") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00Threaded versionType DTE DTF DTS DTTA 1” BSP 1 ½” 1” NPT 1½” NPTB 193 185 197 189C 19 22 26 27D 50 65 52 70SW 40 55 40 55TriclampType DTL DTM DTNTri-Clamp 1” 1 ½” 2”A 50.3 50.3 64B 183 183 167Pipe couplingType DTO DTP DTRPipe coupling DN 25 DN 40 DN 50A 44 56 68,5B 186 170 166NIVOPRESS DTLEVEL TRANSMITTERS25

LEVEL TRANSMITTERSHYDROSTATIC LEVEL TRANSMITTERSNIVOPRESS NLEVEL TRANSMITTERSGENERAL DESCRIPTIONThe NIVOPRESS N hydrostatic level transmitters are designed to measure the level of clean or contaminated liquids.The pressure sensor at the bottom of the probe measures the sum of the hydrostatic pressure (P hydr ) of the liquid column above it and the atmospheric pressure (P atm ). Theatmospheric pressure is led to the sensor through a breathing capillary which is equipped with a moisture filter that prevents the moisture reaching and damaging the electronics.This enables the atmospheric pressure to be subtracted from the measured pressure to get the hydrostatic pressure which is proportional to the height of the liquid column (h).The electronics converts the sensor's signal into an output signal. If temperature measurement (of the liquid) is needed beside the level measurement a combined (level +temperature) transmitter should be used.The installation and wiring of the transmitter is helped by the wide variety of accessories. A sewage adapter working on the principle of the diving bell can be snapped into theplace of the protecting cap to avoid the direct contact between the sensor and the measured contaminated liquid. An extra mechanical protection is built in the NZ typetransmitters in the form of a mechanical filter. The N-500 types can be used in hazardous environments. The NZ screw-in types are recommended for applications where thereis a risk of flooding.MAIN FEATURESMeasuring range up to 200mIP68 protectionSubmersible or screw-in typesØ 22 mm tubeHART communication2- or 3-wire versionsEx versions2 x 4…20mA output (level + temperature)Built-in Pt100 temperature sensorOvervoltage and inverse polarity protectionWide range of accessoriesAPPLICATIONSLevel and temperature measurement ofdrinking water wells, tanks, poolsSubmersible pump controlScrew-in submersible type with IP68protection for applications with riskof floodingClean or slightly polluted,contaminated liquidsSewage watersDraw-down protectionSewage lift station controlCERTIFICATIONSATEXII 1G Ex ia IIC T6NIVOPRESS NPNIVOPRESS NCOVP-32/33overvoltageprotection unitNAA-105cable holding sliding sleeveNAA-101 / NAA-102cable terminal boxNIVOPRESS NZNIVOPRESS NP+NAW-104sewage adapterOVP-22/33overvoltage protection unitNAA-209cable mounting unit26

LEVEL TRANSMITTERSHYDROSTATIC LEVEL TRANSMITTERSNIVOPRESS NTECHNICAL DATAMeasurement rangeOverload allowed(versus range)Type2-wire3-wireNP / NZ NC NPH / NZH0 … 200 m water head 0 … 20 m water head 0 … 200 m water headAs order code, for units with HART output the range can be downscaled to 50% of the nominal range3 x20x (h ≤ 3 mvo)10x (h > 3 mvo)3 xLEVEL TRANSMITTERSOutput 4 ... 20 mA + HART 4 ... 20 mA0…+10V (0 V ≤ 80 mV)measured to the power supplyPower supply 12 ... 30 V DC 18 ... 30 V DC / 6mAMax. load (Ut = power supply;Umin = min. power supply)(Ut – Umin)Rmin =0.02 A≥ 5 kohmTemperature transmitter NPD, NZD typesPower supply:12…30 VDC/4…20mA; 0…+60ºC, accuracy: ±3°CTemperature sensor Pt100 B NPP and NZP types NCP types –Linearity error (level) ± 0.25 %Temperature error ≤ ± 0.1 % / 10 K ≤ ± 0.2 % / 10 KProcess temperature range* –10 ... +60 °C 0 ... +60 °C –10 ... +60 °CProcess connectionNAA-209 cable mounting wedge clamp, NZ types: ¾ ” BSPIngress protection IP 68Electrical protectionClass III.Electrical connectionShielded cable with breathing capillaryCable Ø 7 mm; 0.34 mm 2Cable length0 ... 300 m as order codeDimensionNP: Ø 22x179 mmNZ: Ø 38x158 mmØ40x146 mmNP: Ø 22x179 mmNZ: Ø 38x158 mmMassMaterialof wettedProbe: 0.2 kg Probe: 0.4 kg Probe: 0.2 kgCable: ~ 0.06 kg/mSensor 1.4404 Al2O3 ceramic 1.4404Housing 1.4571Cable coatingPolyurethane / FEPSealingVITON (FKM)Protective cap NP: ABS – NPH: ABSSPECIAL DATA FOR EX CERTIFIED MODELSPower supplyTypeNP / NZ – 500 types14…30 V DCEx marking ATEX II 1G Ex ia IIC T6Intrinsically safe data Ui = 30 V, Ii = 100 mA, Pi = 0.8 W, Ci = 12 nF+ h x 0.4 nF; Li = 1.3mH + h x 0.9 μH (h = cable length in meter)Operation temperature range –10 °C … +60 °CTECHNICAL DATA OF ACCESSORIESCable terminalboxNAA-101Dimensions93 x 93 x 55 mmIngress protection IP 65Process temperature range –40 °C … +70 °CMaterialPolystyreneCable glandM20x1.5 (cable outer diameter: 5 … 10 mm)Electrical connectionTerminal block (for max. 2.5 mm 2 wire cross section)Cable terminal boxwith overvoltageprotectionDataElectrical dataNAA-102See NAA-101See OVP* High temperature (up to 75°C) version is available on special requestCable mountingwedge clampNAA-209Max. mechanical load300 m cableMaterialPolyamideProcess temperature range –20 °C … + 60 °COvervoltageprotection unitOVP22/33 ** OVP32/33 **Type field use DIN 35 mm rail mountableDimensions 72 x 42 x 19 mm 62 x 65 x 18 mmIngress protection IP 54 IP 20Breakdown voltage33 VAbsorbed energy600 W / 1 msSerial resistance13 ohmLeakage current≤ 10 μA** Only for 2-wire 4 … 20 mA versions!27

LEVEL TRANSMITTERSHYDROSTATIC LEVEL TRANSMITTERSNIVOPRESS NLEVEL TRANSMITTERSNIVOPRESS N-200Hydrostatic pressure level transmitter, 2-wire versionCable: PolyurethaneMax. medium temperature: 60°CHumidity filter: fixed to breathing cablePower supply: 12-30 V DCTypeBase price in HRKN X XX XXC Capacitive sensor (up to 20 m w.h.) 3 260,00OutputAdd on price in HRKNX XX XXK Two-wire, 4-20 mA output 0,00PLevel: 4-20mA+ Temperature: Pt100 sensor383,00NIVOPRESS NCVersionNXXAdd on price in HRKX XX2 Standard 0,00RangeAdd on price in HRKNXX 2 XX1 0-100 mbar (0-1 m w.h.) 0,002 0-200 mbar (0-2 m w.h.) 0,003 0-500 mbar (0-5 m w.h.) 0,004 0-1.000 mbar (0-10 m w.h.) 0,005 0-2.000 mbar (0-20 m w.h.) 0,00Breathing cable lengthAdd on price in HRKNXX 2 X 0 1 - 9 9 1-99 m; each started 1 m 28,10A 0 - A 9 100-190 m; each started 1 m 28,10B 0 - B 9 200-290 m; each started 1 m 28,10C 0 300 m; each started 1 m 28,10N 2 High temperature (up to 75°C) version should be given in the text of the order.Add on price in HRK 327,00NAA-101 / NAA-102Service to orderPrice in HRKCustomised 4-20 mA output calibration 252,00Accessories to orderBase price in HRKTerminal box with filter and optional OVP (Overvoltage protection unit), IP65N A A 1 0 1 Without OVP 200,00N A A 1 0 2 With OVP-12/33 (only for N_K versions) 893,00Cable fastening accesoryN A A 1 0 5 Sliding sleeve 1 1/2" BSP 587,00N A A 2 0 9 Cable mounting wedge clamp 47,60NIVOPRESS OVPBase price in HRKOvervoltage protection unitTypeO V P 2 2 / 3 3 IP54 694,00O V P 3 2 / 3 3 IP20, DIN rail mounting 694,00NAA-105NAA-209OVP-22 / 33OVP-32 / 3328

LEVEL TRANSMITTERSHYDROSTATIC LEVEL TRANSMITTERSNIVOPRESS NNIVOPRESS N-400, N-500Hydrostatic pressure level transmitterCable: Polyurethane, FEPMax. medium temperature: 60°CHumidity filter: fixed to breathing cablePower supply:2-wire version: 12-30 V DCEx version:14-30 V DC3-wire version: 18-30 V DCEx marking: ATEX x II 1 G Ex ia IIC T6Programming: for HART capable units with HART modem and the NPCal softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.TypeBase price in HRKN X XX XXP Piezoresistive sensor / PUR 2 160,00Z Piezoresistive sensor, 3/4" BSP process connection 2 370,00F * Piezoresistive sensor / FEP 2 240,00OutputAdd on price in HRKNX XX XXK Two-wire, 4-20 mA + HART 0,00H* Three-wire, 0-10 VDC output 0,00D* Level: 4-20mA + HART383,00+ Temperature: 4-20mA (electronic temp. sensor)PLevel: 4-20mA + HART383,00+ Temperature: Pt100 sensorVersionAdd on price in HRKNXX X XX4 Standard 0,005 Ex 340,00Range**Add on price in HRKNXX X XX1 0-100 mbar (0-1 m w.h.) 0,002 0-200 mbar (0-2 m w.h.) 0,003 0-500 mbar (0-5 m w.h.) 0,004 0-1.000 mbar (0-10 m w.h.) 0,005 0-2.000 mbar (0-20 m w.h.) 0,006 0-5.000 mbar (0-50 m w.h.) 0,007 0-10.000 mbar (0-100 m w.h.) 0,008 0-20.000 mbar (0-200 m w.h.) 0,00Breathing cable lengthAdd on price in HRKNXX XXPUR cable0 1 - 9 9 1-99 m; each started 1 m 28,10A 0 - A 9 100-190 m; each started 1 m 28,10B 0 - B 9 200-290 m; each started 1 m 28,10C 0 300 m; each started 1 m 28,10FEP cable0 1 - 9 9 1-99 m; each started 1 m 61,20A 0 - A 9 100-190 m; each started 1 m 61,20B 0 - B 9 200-290 m; each started 1 m 61,20C 0 300 m; each started 1 m 61,20N * Ex version not available** With HART capable units the turn down ratio is 2:1High temperature (up to 75°C) version should be given in the text of the order.(Ex version not available.) Add on price in HRK327,00Service to orderPrice in HRKCustomised 4-20 mA output calibration 252,00Accessories to orderTerminal box with filter and optional OVP (Overvoltage protection unit), IP65Base price in HRKN A A 1 0 1 Without OVP 200,00N A A 1 0 2 With OVP-12/33 (only for N_K versions) 893,00Cable fastening accesoryN A A 1 0 5 Sliding sleeve 1 1/2" BSP 587,00N A A 2 0 9 Cable mounting wedge clamp 47,60Other accessoriesN A W 1 0 4 Adapter for waste water applications (for NP version) 267,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00NIVOPRESS OVPOvervoltage protection unitBase price in HRKO V P 2 2 / 3 3 IP54 694,00O V P 3 2 / 3 3 IP20, DIN rail mounting 694,00NIVOPRESS NPNAA-105NIVOPRESS NZNIVOPRESS NP +NAW-104 sawage adapterNAA-101 / NAA-102OVP-22 / 33OVP-32 / 33NAA-209LEVEL TRANSMITTERS29

LEVEL TRANSMITTERSBYPASS LIQUID LEVEL INDICATORSNIVOFLIPLEVEL TRANSMITTERSGENERAL DESCRIPTIONThe NIVOFLIP is a bypass level indicator for pressurized vessels with up to 5.5 mflange distance containing liquids. The device has the international PED (PressureEquipment Directive) approval, so it can be used for level indication of pressurizedvessels up to 100 bar process pressure. The high temperature types are applicableup to 250 ˚C process temperature. The NIVOFLIP can be equipped with optionallimit switches or with NIVELCO’s NIVOTRACK high-precision magnetostrictive leveltransmitter if level transmission is needed.MAIN FEATURESClearly visible optical displayMeasuring range: 500-5500 mm± 10 mm accuracyMax. 100 bar process pressureHigh temperature versionOptional level switchesOptional magnetostrictive leveltransmitterPED approvalAPPLICATIONSOil and gas industriesChemical industryPower generationBoilersPressurized vesselsTanksOPERATIONThe welded bypass chamber that is the body of the indicator and the tank form onepressurized system. Mounted on suitable connection flanges located on the side of thetank the liquid level in the bypass tube and the tank is equal. A float in the bypass tubeincorporating a polarized magnet tracks the level of the liquid. The bi-coloured magneticflaps mounted on the tube composing a bar are serving as visual indicators by changingtheir colour as the float passes. The rotated flaps represent the actual level. The lower100 mm of the bottom section of the indicating bar has different colour providing for anoptical error signal in case the liquid level drops below the lower connection point of theinstrument.NIVOFLIP LEVEL INDICATOR SYSTEMThe NIVOFLIP bypass liquid level indicator can be equipped with MAK-100-external level switches and this way it can provide limit level indication. In case ofusing MAK-100 level switch the minimal medium density should be 0.1 kg/dm 3 morethan the specified. When the provided accuracy of the magnetic flaps is not enough,the high-precision NIVOTRACK M L-500/600 magnetostrictive level transmittersare recommended to use. Equipped with the OIML R85 approved NIVOTRACK themeasurement system is applicable for custody transfer measurements. The rigid probemagnetostrictive transmitter without float and process connection can be mountedexternally by clamps to the bypass chamber. All optional units are operated viamagnetic coupling, there is no direct contact with the measured medium.PROPERTIESNIVOFLIPNormal typeHightemperaturetypeViscous version –Stainless steelfloatTitan floatPED approvalMax. 100 barmedium pressureMax. 250 ˚Cmedium temperatureOptionallevel switchOptionallevel transmitter––––30

LEVEL TRANSMITTERSBYPASS LIQUID LEVEL INDICATORSNIVOFLIPTECHNICAL DATATypeOptical displayStandardNormal typeViscousBi-coloured magnetic flapsHigh temperaturetypeLEVEL TRANSMITTERSscalecmDisplayaccuracyresolutionerror indication± 10 mm5 mmlower 100 mm, inverse polarized flapsTube diameter Ø 60.3 mm Ø 73.3 mm Ø 60.3 mmFlange distance (center to center)Process connectionAerating connection500 –5500 mm (as per order code)DIN, ANSI flanges (as per order code)M20x1,5Process pressure 1 max. 100 bar max. 40 bar max. 88 barMedium temperature -40°C … +130°C -40°C … +250°CAmbient temperature-40°C … +60°CMedium density 2 with stainless steel float: 0.8-1.2 kg/dm 3 , with titan float: 0.55-1.1 kg/dm 3Level switchoptional, freely adjustableMAK-100 level switch–Level transmitter optional NIVOTRACK M L-500 magnetostrictive level transmitter –1Above 40 bar only with titan float2In case of using MAK-100 level switch the minimal medium density should be 0.1 kg/dm 3 more than the above specifiedMAK-100 MAGNETIC LEVEL SWITCHESGENERAL DESCRIPTIONThe MAK-100 type magnetic level switches are optional accessories forNIVOFLIP bypass level indicators. In the stainless steel bypass tubethe float of NIVOFLIP tracks the liquid level.The float (incorporating a permanent magnet) operates the freelypositioned MAK-100 level switch via magnetic coupling and providesnon-contact signal transfer to the microswitch. There should be at least100 mm distance between two switching points.TEMPERATURE DATAFOR Ex CERTIFIED MODELSClassesTEMPERATURE CLASSESMax.medium tempMax.ambient tempT6 +80°C –20…+60°CT5 +95°C –20…+70°CT4 +130°C –20…+80°CTECHNICAL DATAType MAK-100-0 MAK-100-6Medium temperature max.: 130°C See:TemperatureAmbient temperature-20°C ... +80°C classes tableMaterial of the switch-housingSwitchSwitching dataElectricalconnectionPaint coated aluminium cast250V 2.5A AC12,220V 0.3A DC131 microswitch,with NO, NC contactsonly Ex iacertified and approvedcontact isolator shouldbe used for supplycable gland: M20x1,5terminal for max. 2.5 mm 2Ingress protection IP 65Electrical protection Class I.Ex marking – II 1GMass1.5 kg31

LEVEL TRANSMITTERSBYPASS LIQUID LEVEL INDICATORSNIVOFLIPLEVEL TRANSMITTERSNIVOFLIP MLLiquid bypass level indicator with optical display and magnetic floatMaterial of wetted parts: stainless steel 1.4571Housing of the optical flap display: casted aluminiumMedium density: 0.8-1.2 kg/dm 3 (1.4571) or 0.5-0.9 kg/dm 3 (Titan)Process connection: flange (as order code)TypeBase price in HRKM XX XXX X 5 530,00VersionFelárak HUF-banM 0 XXX XL Standard version, max. 130°C 0,00H High temperature version, max. 250°C, only for tube Ø 60,3mm, as per pressure diagram0,00Process connectionAdd on prices in HRKM X XXX XA DN15 1 360,00B DN20 1 530,00C DN25 1 700,00D DN40 2 130,00E DN50 2 810,00F ANSI 1/2" 1 360,00G ANSI 3/4" 1 530,00H ANSI 1" 1 700,00J ANSI 1 1/2" 2 130,00K ANSI 2" 2 810,00Bypass tube / PressureAdd on prices in HRKM XX XX X1 60.3 mm tube diameter / PN40; 400 psi 0,002 73.3 mm tube diameter / PN40; 400 psi 510,003 60.3 mm tube diameter / PN64; 600 psi (only with Titan float) 5 530,004 60.3 mm tube diameter / PN100; 900 psi (only with Titan float) 8 930,00NIVOFLIP MLMeasuring range (center to center)Add on prices in HRKM XX X X0 5 - 55 0.5-5.5 m Ø60.3 / PN40; 400 psi; each started 0.1 m 258,000 5 - 55 0.5-5.5 m Ø73.3 / PN40; 400 psi; each started 0.1 m 286,000 5 - 55 0.5-5.5 m Ø60.3 / PN64; 600 psi; each started 0.1 m 286,000 5 - 55 0.5-5.5 m Ø60.3 / PN100; 900 psi; each started 0.1 m 300,00Float material*Add on prices in HRKM XX XXX0 1.4571 0,001 Titan 1 660,00M * Special float is available to order for phase-separation indicationThe instrument can be equipped with high resolution Nivotrack M_L-500 magnetostrictive leveltransmitter! (Centre to centre distance + 300mm/1.4571 float or centre to centre distance +400mm/titanium float.)NIVOFLIP MAK-100Magnetic coupling limit switch for NIVOFLIP ML bypass level indicator,with contact output, factory positioned at ordered distancesMin. medium density: 0.9 kg/dm 3 (1.4571) or 0.6 kg/dm 3 (Titan)Alu housing with IP65Ex marking: ATEX x II 1G ExiaTypeBase price in HRKM A K 1 0 0 X 1 120,00ApprovalAdd on prices in HRKM A K 1 0 0 0 None 0,006 Exia 136,00NIVOFLIP MAK-100M A K 10032

LEVEL TRANSMITTERSMAGNETOSTRICTIVE LEVEL TRANSMITTERSNIVOTRACKLEVEL TRANSMITTERSTECHNICAL DATATypeMeasured process valueRigidprobe versionFlexible probeversionPlastic coated,rigid probe versionLiquid level, distance, volumeMini versionwith rigid probeNominal length (L) 0.5 m … 4,5 m 2 m … 15 m 0.5 m … 3 m 0.5 m … 1.5 mMaterial of the tube Stainless steel: DIN 1.4571 PFA coated stainless steel Stainless steel: DIN 1.4571Max. medium pressure* 2.5 MPa (25 bar) 1.6 MPa (16 bar) 0.3 MPa (3 bar) 1 MPa (10 bar)Medium temperatureResolutionLinearity with dry calibrationTemperature coefficientRange spanZero point offset-40 °C ... +90 °C, see the manual: temperature diagram0.1 mm or 1 mm± 0.25 mm or ± 1 mm0.04 mm / 10 °C (between -40 °C…+70 °C)Maximum range: see the manual: dimensions ; Minimum range: 200 mmAnywhere within the rangeStandard floatdiameter / material**Ø 53.5 x 60 mm cylindrical/ 1.4404Ø 95 mm ball /1.4404Ø 76 x 87 mm cylindrical/ PVDF / PPØ 27 x 29 mm cylindrical/ 316LMedium densityDepends on the applied floatMaterial of wetted parts Stainless steel: DIN 1.4571, 1.4404 PFA, PVDF, PP Stainless steel: DIN 1.4571, 316LAmbient temperatureAnalogue–40 ºC…+70 ºC, plastic housing: –25 ºC…+70 ºC, with display: –25 ºC…+70 ºC, Ex: see manual4 – 20 mA (limit values: 3.9 – 20.5 mA)OutputSerial comm.DisplayHARTSAP-300 graphic displayDamping timeError indicationOutput loadPower supplyElectrical protection0 s … 99 s22 mA or 3.8 mA or holdingRt = (Ut-12.5V) / 0.02 A, Ut = power supply voltage12.5 V – 36 V DCClass III.Ingress protection IP 67Process connectionAs per order codeElectrical connection Cable gland M 20 x 1.5, cable outer diameter: Ø6 … Ø12 mm, wire cross section: max.1.5 mm 2HousingPaint coated aluminium or plastic (PBT)Mass1.7 kg+ m. probe: 0.6 kg/m2.9 kg + m. probe: 0.3 kg/m+ weight 3.5 kg1.7 kg+ m. probe: 0.7 kg/m1.7 kg + m. probe: 0.6 kg/m* Depends on selected float** Requested float type should be specified when placing an orderSPECIAL DATA FOR EX CERTIFIED MODELSProtection type ia d d iaEx markingATEXII 1 G Ex ia IIB T6…T50.5 … 15 mII 2 G Ex d IIB T6…T50.5 … 10 mII 1/2 G Ex d ia IIB T6…T50.5 … 10 mIEC Ex Ex ia IIB T6 Ga Ex d IIB T6 Gb Ex d ia IIB T6 GaPower supply and signal circuit limits U imax = 30 V I imax = 140 mA P imax = 1 W Ci < 60 nF Li < 200 μHCable gland Steel M 20 x1.5 cable gland Steel M 20 x1.5 Ex d approved cable glandCable outer diameter Ø 7 …13 mm Ø 9 …11 mm34

LEVEL TRANSMITTERSMAGNETOSTRICTIVE LEVEL TRANSMITTERSNIVOTRACKNIVOTRACK M-500, M-600, rigid probe2-wire magnetostrictive level transmitter with rigid probeResolution: 0.1 mm or 1 mmAll wetted parts: stainless steelHousing: aluminium or plastic (PBT glass fibre reinforced) with IP67 / NEMA 6Power supply: 12.5-36 V DCProbe lengths: 0.5-3.0 mFloat, standard: Ø 53,5 x 60 mm (min. 0.8 g/cm 3 )Ex marking: ATEX x II 1G Ex ia IIB T6...T5 IEC Ex ia IIB T6 Ga*ATEX x II 2G Ex d IIB T6...T5 IEC Ex d IIB T6 Gb*ATEX x II 1/2G Ex d ia IIB T6...T5 IEC Ex dia IIB T6 Ga*ProgrammingWith SAP-300 programmer: Complete programming, 99-point linearisationRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.Ball float Ø 95 mm (min. 0.55 g/cm 3 ) or Ø 54 mm titanium (min. 0.55 g/cm3) orØ 124 mm (min. 0.4 g/cm3) available on request. This request and the need forside viewed model (Position “B”) should be given in the text of the order.Add on price for titan float 833,00TypeBase price in HRKM XX XXX X 4580,00VersionAdd on price in HRKM X XXX XT Transmitter 0,00B Transmitter with local LCD indicator 544,00Process connectionAdd on price in HRKM X XXX XA 1" BSP 93,50C 2" BSP 354,00D 1" NPT 93,50G 2" NPT 354,00U Without process connection for sliding sleeve 0,00L ** Without float, for Nivoflip 0,00HousingAdd on price in HRKM XX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced (Ex version not available) 0,00Probe lengthAdd on price in HRKM XX X X05 1 0 0.5-1 m 0,0011 3 0 1.1-3 m; each started 100 mm 56,10Output / Resolution / ApprovalAdd on price in HRKM XX XXX1 4-20 mA / 0.1 mm 918,002 4-20 mA / 1 mm 0,003 4-20 mA + HART / 0.1 mm 1610,004 4-20 mA + HART / 1 mm 688,005 4-20 mA / 0.1 mm / Exia 1670,006 4-20 mA / 1 mm / Exia 748,007 4-20 mA + HART / 0.1 mm / Exia 2350,008 4-20 mA + HART / 1 mm / Exia 1440,00A 4-20 mA / 0.1 mm / Exd 2040,00B 4-20 mA + HART / 0.1 mm / Exd 2730,00C 4-20 mA / 0.1 mm / Exd + Exia 2790,00D 4-20 mA + HART / 0.1 mm / Exd + Exia 3480,00NIVOTRACK MTA/D-5 NIVOTRACK MTC/G-5NIVOTRACK MTU-5NIVOTRACK MBH / MBL-105LEVEL TRANSMITTERSM Only devices with 2" process connection and Ø 54 floats can be installed without previousdisassembly.* Need of IEC is to be specified with order ** Length = center to center of Nivoflip + 300 mmAccessories to orderTypePrice in HRKS AP 3 0 0 Plug-in display module (See "Electronic accessories") 544,00MBH-105-2M-300-00 Sliding sleeve: 1" BSP 570,00MBK-105-2M-300-00 Sliding sleeve: 2" BSP 570,00MBL-105-2M-300-00 Sliding sleeve: 1" NPT 570,00MBN-105-2M-300-00 Sliding sleeve: 2" NPT 570,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00TypeMBH-105-2M-300-00MBK-105-2M-300-00MBL-105-2M-300-00MBN-105-2M-300-00NIVOTRACK MBK / MBN-105Mat.Proc.conn.S(mm)DimensionsH(mm)L(mm)B(mm)1.4571 1” BSP 41 36 20 –1.4571 2” BSP 70 56 25 –1.4571 1” NPT 41 38 – 101.4571 2” NPT 70 55 – 1135

LEVEL TRANSMITTERSMAGNETOSTRICTIVE LEVEL TRANSMITTERSNIVOTRACKLEVEL TRANSMITTERSNIVOTRACK M-500, M-600, flexible probe2-wire magnetostrictive level transmitter with flexible probe and with weight for spanningResolution: 0.1 mm or 1 mmAll wetted parts: stainless steelHousing: aluminium or plastic (PBT glass fibre reinforced) with IP67 / NEMA 6Power supply: 12.5-36 V DCProbe lengths: 2-15 mFloat: ball Ø 95 mm (min. 0.55 g/cm 3 )Ex marking: ATEX x II 1G Ex ia IIB T6...T5ATEX x II 2G Ex d IIB T6...T5ATEX x II 1/2G Ex d ia IIB T6...T5ProgrammingWith SAP-300 programmer: Complete programming, 99-point linearisationRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.Ball float Ø 124 mm (min. 0.4 g/cm 3 ) available on request. This request and the need for side viewedmodel (Position “B”) should be given in the text of the order.TypeBase price in HRKM XX XXX X 7990,00VersionAdd on price in HRKM X XXX XT Transmitter 0,00B Transmitter with local LCD indicator 544,00NIVOTRACK MTK-5Process connectionAdd on price in HRKM X XXX XK 2" BSP 354,00N 2" NPT 354,00HousingAdd on price in HRKM XX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced (Ex version not available) 0,00Probe lengthAdd on price in HRKM XX X X2 0 3 0 2-3 m 0,0031 F 0 3.1-15 m; each started 100 mm 65,50Output / Resolution / ApprovalAdd on price in HRKM XX XXX1 4-20 mA / 0.1 mm 918,002 4-20 mA / 1 mm 0,003 4-20 mA + HART / 0.1 mm 1610,004 4-20 mA + HART / 1 mm 688,005 4-20 mA / 0.1 mm / Exia 1670,006 4-20 mA / 1 mm / Exia 748,007 4-20 mA + HART / 0.1 mm / Exia 2350,008 4-20 mA + HART / 1 mm / Exia 1440,00A 4-20 mA / 0.1 mm / Exd (up to 10 m) 2040,00B 4-20 mA + HART / 0.1 mm / Exd (up to 10 m) 2730,00C 4-20 mA / 0.1 mm / Exd + Exia (up to 10 m) 2790,00D 4-20 mA + HART / 0.1 mm / Exd + Exia (up to 10 m) 3480,00M Accessories to orderTypePrice in HRKS AP 3 0 0 Plug-in display module (See "Electronic accessories") 544,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,0036

LEVEL TRANSMITTERSMAGNETOSTRICTIVE LEVEL TRANSMITTERSNIVOTRACKNIVOTRACK M-500, M-600, plastic version2-wire magnetostrictive level transmitter with rigid probeResolution: 0.1 mm or 1 mmHousing: aluminium or plastic (PBT glass fibre reinforced) with IP67 / NEMA 6Materials:ProbePFA coated stainless steelFloatPVDFPower supply: 12.5-36 V DCProbe lengths: 0.5-3.0 mFloat: Ø 76x87 mm (min. 0.8 g/cm 3 )Ex marking: ATEX x II 1G Ex ia IIB T6...T5ATEX x II 2G Ex d IIB T6...T5ATEX x II 1/2G Ex d ia IIB T6...T5ProgrammingWith SAP-300 programmer: Complete programming, 99-point linearisationRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.LEVEL TRANSMITTERSThe need for side viewed model (Position “B”) should be given in the text of the order.Float 122x37 mm (min. 0.7 g/cm 3 ) available on request.TypeBase price in HRKM XX XXX X 5800,00NIVOTRACK MEU-5VersionAdd on price in HRKM X XXX XE Transmitter 0,00G Transmitter with local LCD indicator 544,00Process connectionAdd on price in HRKM X XXX XU Without process connection 0,00HousingAdd on price in HRKM XX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced (Ex version not available) 0,00Probe lengthAdd on price in HRKM XX X X05 1 0 0.5-1 m 0,0011 3 0 1.1-3 m; each started 100 mm 127,00Output / Resolution / ApprovalAdd on price in HRKM XX XXX1 4-20 mA / 0.1 mm 918,002 4-20 mA / 1 mm 0,003 4-20 mA + HART / 0.1 mm 1610,004 4-20 mA + HART / 1 mm 688,005 4-20 mA / 0.1 mm / Exia 1670,006 4-20 mA / 1 mm / Exia 748,007 4-20 mA + HART / 0.1 mm / Exia 2350,008 4-20 mA + HART / 1 mm / Exia 1440,00A 4-20 mA / 0.1 mm / Exd 2040,00B 4-20 mA + HART / 0.1 mm / Exd 2730,00C 4-20 mA / 0.1 mm / Exd + Exia 2790,00D 4-20 mA + HART / 0.1 mm / Exd + Exia 3480,00M Process connectionPrice in HRKM F T 3 3 1 2 PP flange drilled like DN100, PN16 + 1" BSP sliding sleeve should271,00be orderedM F T 3 2 1 2 PP flange drilled like DN80, PN16 + 1" BSP sliding sleeve in234,00should be orderedMGH-105-2M-300-00 Sliding sleeve: 1" BSP 333,00MGL-105-2M-300-00 Sliding sleeve: 1" NPT 333,00Accessories to orderS AP 3 0 0 Plug-in display module (See "Electronic accessories") 544,00S A S 3 0 3 Eview 2 software package (See "Electronic accessories") 5140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00TypeMGH-105-2M-300-00MGL-105-2M-300-00NIVOTRACK MGH-105Mat.Proc.conn.DimensionsS(mm)H(mm)L(mm)PVDF 1” BSP 46 42 22PVDF 1” NPT 46 42 2237

LEVEL TRANSMITTERSMAGNETOSTRICTIVE LEVEL TRANSMITTERSNIVOTRACKLEVEL TRANSMITTERSNIVOTRACK M-500, M-600, rigid probe, mini version2-wire magnetostrictive level transmitter with rigid probe, mini version with 1" BSP/NPT process connectionResolution: 0.1 mm or 1 mmAll wetted parts: stainless steelHousing: aluminium or plastic (PBT glass fibre reinforced) with IP67 / NEMA 6Max. medium pressure: 10 barPower supply: 12.5-36 V DCProbe lengths: 0.5-1.5 mFloat: Ø 27 x 29 mm (min. 0.7 g/cm 3 )Ex marking: ATEX x II 1G Ex ia IIB T6...T5ProgrammingWith SAP-300 programmer: Complete programming, 99-point linearisationRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.TypeBase price in HRKM XX XXX X 4580,00VersionAdd on price in HRKM X XXX XM Transmitter 0,00C Transmitter with local LCD indicator 544,00NIVOTRACK MMA-5Process connectionAdd on price in HRKM X XXX XA 1" BSP 93,50D 1" NPT 93,50HousingAdd on price in HRKM XX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced (Ex version not available) 0,00Probe lengthAdd on price in HRKM XX X X05 1 0 0.5-1 m 0,0011 1 5 1.1-1.5 m; each started 100 mm 56,10Output / Resolution / ApprovalAdd on price in HRKM XX XXX1 4-20 mA / 0.1 mm 918,002 4-20 mA / 1 mm 0,003 4-20 mA + HART / 0.1 mm 1610,004 4-20 mA + HART / 1 mm 688,005 4-20 mA / 0.1 mm / Exia 1670,006 4-20 mA / 1 mm / Exia 748,007 4-20 mA + HART / 0.1 mm / Exia 2350,008 4-20 mA + HART / 1 mm / Exia 1440,00M Accessories to orderTypePrice in HRKS AP 3 0 0 Plug-in display module (See "Electronic accessories") 544,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,0038

LEVEL TRANSMITTERSULTRASONIC INTEGRATED LEVEL TRANSMITTERS FOR LIQUIDSEasyTREKGENERAL DESCRIPTIONEasyTREK is a rugged, high performance ultrasonic level measurement transmitter, having transducer and processing electronics incorporated in one single housing.EasyTREK SAVES COSTS - EasyTREK is a low cost transmitter unit from NIVELCO: it has all the sophisticated echo detection features of the well accepted EchoTREK measurementsystems, packed into the 2 wire EasyTREK sensor housing. For multiple tank applications 2-wire transmitters are recommended using HART multi-drop systems linked to the NIVELCOMultiCONT controller, or a modem plus PC.LIQUID MEASUREMENT - whether for liquid level measurement in sumps or tanks, for tank contents measurement, or open channel flow measurement, EasyTREK transmittersprovide the answer. All EasyTREK transmitters use the same processing electronics and communications, the transducer itself varies only to give different range.LEVEL TRANSMITTERSMAIN FEATURES2-wire Integrated compact transmitterLow costNon-contact level measurementTemperature compensatedNarrow 5° beam angleExcellent signal processing via QUEST+ softwarePP or PVDF housingHART communicationEx versionsIP 68 protectionEASYTREK FUNCTIONSLiquidEasyTREK2-wireRelayHARTIntrinsically safeAPPLICATIONSFor most liquids, includingexplosive liquidsLevel, volume and open channelflow measurementLow or high fail safe indicationCERTIFICATESSPA-380-4HARTATEXII 1G EEx ia IIB T6PROGRAMMINGUsing a PC and UNICOMM HART modem, it is possible to create yourown multi-drop HART network, where the PC displays all EasyTREKmeasurement data and also allows reprogramming of the unitsas necessary.In this way the outputs derived from the displayed data can beprogrammed via the PC, which acts as the master.Programmable features via HART communication:Assign 4 mA to low levelAssign 20 mA to high levelError indication output current valuePower relay switch pointsDamping timeMeasurement configuration (Units, function, close-end blocking)Measurement optimisation (Damping, tracking speed, sound velocity correction)Tank contents profiles: 14 different shapesOpen Channel Flow Metering: 21 different profilesRelay functions (differential, flow pulse etc)32 point linearization, measurement simulationInformation/diagnostics (Echo map and signal/noise)39

LEVEL TRANSMITTERSULTRASONIC INTEGRATED LEVEL TRANSMITTERS FOR LIQUIDSEasyTREKLEVEL TRANSMITTERSTECHNICAL DATAEasyTREKlevel transmittersfor liquids2-wire version SP¨–39¨ SP¨–38¨ SP¨–37¨ SP¨–36¨ SP¨–34¨ SP¨–32¨Measuring range 2 0.2…4 m 0.25…6 m 0.35…8 m 0.35…10 m 0.45…15 m 0.6…25 mTotal beam angle 6° 5° 7° 5° 5° 5°Ambient temperature –30 °C … +80 °CMedium temperature –30 °C … +90 °CProcess pressure(absolute)0.03 … 0.3 MPa (0.3 … 3 bar)Process connection 1” or 1 1/2” BSP / NPT 1” or 2 ” BSP / NPT 1” or 2” BSP / NPT 1” BSP 1” BSP 1” BSPApplied materials 1PP or PVDF housing; PP, PVDF or PTFE transducer, EPDM cable sealing, PVC cable isolationAccuracy 2Resolution(dep. on distance)± (0.2 % of measured distance +0.05 % of range)10m: 10 mmIngress protection IP 68Ex marking ATEX II 1 G EEx ia II B T6 –Outputs 2-wire Standard: 4-20 mA +HART, max. 600 Ohm, Relay (SPDT, 30 V DC, 1 A DC; 48 V / 0.5 A AC)Power supply 2-wire 12 ... 36 V DC / 44 ... 800 mWConnectingcable2-wire LIYCY type 2 x 0.5 mm 2 shielded cable, Ø 6 mm ; standard length 5 m (can be ordered max. 30 m)1PTFE transducer is available for SP-39, SP-38, SP-37 series only2Under optimal circumstances of reflection and stabilised transducer temperatureSAT-304 HART modemSPA-360-4MultiCONTSPA-340-4SPB-360-8Ex40

LEVEL TRANSMITTERSULTRASONIC INTEGRATED LEVEL TRANSMITTERS FOR LIQUIDSEasyTREKEasyTREK SP-39/38/37/36/34/32 - 2-wire versionsIntegrated compact ultrasonic level transmitters with process current and HARTcommunication as standard for liquid applications onlySenSonic transducer technology, QUEST+ advanced, process adaptive signal processing,secondary lightning protection, fully temperature compensatedTransducer and enclosure material PP with IP68; 5 m integrated cablePower supply: 12-36 V DCEx marking: ATEX x II 1 G EEx ia IIB T6Full feature programming: standard with flow metering, 32-point linearisation, applicationoptimisation, fixed target supression, etc. with HART modem and the EView software orwith the MultiCONT controller. The EView light software (on DVD) is provided free of charge.EasyTREK SP_-39LEVEL TRANSMITTERSTypeBase price in HRKS PX 3 X X9 0.2-4 m* (80 kHz) 1“ and 1 1/2” mounting 3550,008 0.25-6 m* (80 kHz) 1“ and 2” mounting 3550,007 0.35-8 m* (60 kHz) 1“ and 2” mounting 4210,006 0.35-10 m (60 kHz) 1“ mounting 4210,004 0.45-15 m (40 kHz) 1“ mounting 4490,002 ** 0.6-25 m (20 kHz) 1“ mounting 5910,00Transducer materialAdd on prices in HRKS P 3 XX XA PP 0,00B PVDF 275,00T PTFE 667,00MountingAdd on prices in HRKS P X 3 X X0 BSP thread 0,00N 1 1/2" or 2” NPT and 1” BSP (Only for SP-39/38/37) 0,00Output / ApprovalAdd on prices in HRKS P X 3 XX3 4-20 mA + HART + Data logging feature 468,004 4-20 mA + HART 0,007 4-20 mA + HART + Data logging feature / Ex 1220,008 4-20 mA + HART / Ex 748,00A 4-20 mA with data logging feature / HART / Relay 723,00H 4-20 mA / HART / Relay 255,00EasyTREK SP_-38EasyTREK SP_-37S P 3* Measuring ranges for the PTFE version:PTFES-39 0.2-3 mS-38 0.25-5 mS-37 0.35-6 m** Ex version not availableEasyTREK SP_-36CableAdd on prices in HRKMaximum length 30 m; each started 1 m over the standard 5 m 19,60Accessories to orderTypePrices in HRKS FAFlanges (See "Mounting accessories")S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00S AK 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00Mounting brackets for process connection: BSP 1"S AA 1 0 1 Fast connecting gland for pipe mounting devices with 1”71,40process connectionS AA 1 0 7 0 200 mm mounting bracket (Paint coated steel) 403,00S AA 1 0 8 0 500 mm mounting bracket (Paint coated steel) 1040,00S AA 1 0 9 0 700 mm mounting bracket (Paint coated steel) 1260,00S AA 1 0 6 Damping gland for mounting SC and SP devices to thin metalroofs118,00EasyTREK SP_-34EasyTREK SP_-32NIV24EasyTREK SPA-380-4SAT-30441

LEVEL TRANSMITTERSULTRASONIC INTEGRATED LEVEL TRANSMITTERS FOR SOLIDSEasyTREKLEVEL TRANSMITTERSGENERAL DESCRIPTIONNIVELCO, the expert in solids level measurement, now presents EasyTREK, its COMPACT integrated transmitter for solids. EasyTREK for solids includes all the capabilities and technologyof higher costs separated units, such as the high efficiency SenSonic transducer, with its superb signal transmission, as well as the advanced QUEST+ process adaptive signal processingsoftware. QUEST+ allows reliable echo monitoring to overcome filling noise, dusting and irregular surface formation. All transmitters are HART capable, and are particularly cost effectivewhen applied to multidrop systems, using MultiCONT or other HART based systems.MAIN FEATURES4-wire Integratedcompact transmitterLow costNon-contact level measuringTemperature compensatedNarrow 5° beam angleExcellent signal processing viaQUEST+ softwareRelay output,HART communicationDust-Ex approvalIP 68 protectionAPPLICATIONSFor most free-flowing solidsLevel, volume or weightcalculationReliable measurement inchallenging applicationssuch as dusting during fillingCERTIFICATIONSATEXII 1 D IP 68 T130°CTECHNICAL DATAEasyTREKlevel transmittersfor solids4-wire SCD–34¨ SCD–33¨ SCD–31¨Dimensions (mm)Measuring range * 0,6…15 m 0,6…30 m 1,2…60 mTotal beam angle 5°Ambient temperature –30 °C … +60 °CProcess pressureProcess connectionApplied materialsAtmospherical1” BSP or flange with aimerHousing: PP or aluminium, sensor protector: polyurethane foamEPDM cable sealing, PVC cable isolationAccuracy*± (0.2 % of measured distance +0.1 % of range)Resolution (dep. on distance)

LEVEL TRANSMITTERSULTRASONIC INTEGRATED LEVEL TRANSMITTERS FOR SOLIDSEasyTREKEasyTREK SCD-34/33/31 - 4-wire versionsIntegrated compact ultrasonic level transmitters with process current and HARTcommunication as standard for solidsSenSonic transducer technology, QUEST+ advanced, process adaptive signalprocessing, secondary lightning protection, fully temperature compensatedTransducer: Polypropylene, Polyurethane foam face, IP65 / NEMA 4; 5 m integrated cablePower supply: 11.4-40 V DC and 11.4-28 V ACEx marking: ATEX x II 1D IP68 T130°CFull feature programming: standard with 32-point linearisation, applicationoptimisation, fixed target supression, etc. with HART modem and the EView software orwith the MultiCONT controller. The EView light software (on DVD) is provided free of charge.EasyTREK SCD-340 / SCD-330EasyTREK SCD-340 Ex / SCD-330 ExLEVEL TRANSMITTERSTypeBase price in HRKSCD 3 X X4 0.6-15 m 5240,003 0.6-30 m 6260,001 1.2-60 m 7140,00MountingAdd on prices in HRKSCD 3 X X0 BSP thread 0,00J With aming device 840,00Output / ApprovalAdd on prices in HRKSCD 3 XX4 4-20 mA + HART+ Relay / none 0,008 4-20 mA + HART + Relay / Ex 550,00EasyTREK SCD-310SCD 3CableAdd on prices in HRKMaximum length 30 m; each started 1 m over the standard 5 m 19,60Accessories to orderTypePrices in HRKS FAFlanges (See "Mounting accessories")S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00S AK 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00EasyTREK SCD-310 ExNIVOSONAR SAA-101 71,40Fast connecting gland for pipe mounting devices with 1" process connectionMaterial: PPNIVOSONAR SAA-102 840,00Aiming device, 500 mm, Aluminium, Pg9, drilled as DN50 PN16Do not forget to order the appropriate flange separatelyNIVOSONAR SAA-106 118,00Damping gland for mounting SC and SP devices to thin metal roofsMaterial: PPSAA-10243

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKLEVEL TRANSMITTERSGENERAL DESCRIPTIONEchoTREK ultrasonic transmitters offer the best in liquid level measurement in a compact simple package. Developed using the established SenSonic range of Narrow beam anglepulse echo transducers, EchoTREK units are available with measurement ranges up to 25 meters - with standard plastic, PTFE or stainless steel sensor faces. Installed on the tankroof, or above the liquid level surface to be measured, the transmitter gives an analogue output proportional to liquid level. Initial set-up is achieved using the simple plug-in displaymodule: then the intelligent QUEST+ process adaptive signal processing software system ensures that the electronics identifies and validates the liquid surface signal, giving reliablelevel monitoring.MAIN FEATURESMax. 25 m measuring rangeDigital communicationPower relay output for control and alarmFull temperature compensationFrom water through chemical applicationsComplete open channel flow metering package32 point linearizationEx versionsData-logging facility. The data logger incorporated in thetwo-wire EchoTREK can store 10.000 sets of data. Recordingcan be triggered by a specific event or by time. The EchoTREKholds data available for downloading it via HART protocolIrDA communication port on the programming module(Infrared communication for the data-logger)EchoTREK SELECTION CHARTFor liquidsEchoTREKSE/SG-300 ST/SB-400RelayHARTEx ia (Intrinsically safe) –IrDaLoggerDisplay SAP-200 SAP-200APPLICATIONSFor most liquids, including explosive liquidsAlso suitable for hydrocarbons, solvents,chemicalsLevel, volume and open channel flow measurementReliable measurement in challenging applicationsCERTIFICATIONSATEXII 1G EEx ia IIB T6SG¨ 380-4 (2-wire)SB¨-480-4 (4-wire)SAT-304 HART modemMultiCONTSEV-390-8 Ex + SFA-3¨644

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKTECHNICAL DATAType SE/SG-39o-o SE/SG-38o-o SE/SG-37o-o SE/SG-36o-o SE/SG-34o-o SE/SG-32o-oEchoTREK level transmittersfor liquids(2-wire)LEVEL TRANSMITTERSType ST/SB-49o-o ST/SB-48o-o ST/SB-47o-o ST/SB-46o-o ST/SB-44o-o ST/SB-42o-oEchoTREK level transmittersfor liquids(4-wire, with 2 relays)ApplicationSmall vessels,with 1 ½"process connectionSmall vesselswith 2" process connectionSmall vesselswith flangeMid-size vesselswith flangeTall vesselswith flangeMax. measuring range 4 m / PTFE 3 m 6 m / PTFE 5 m 8 m / PTFE 6 m 10 m 15 m 25 mMin. measuring range 0.2 / PTFE 0.25 m 0.25 m 0.35 m 0.35 m 0.45 m 0.6 mTotal beam angle 6° 5° 7° 5° 5° 7°Process connection 1 ½" BSP / NPT 2" BSP / NPT 2" BSP / NPT DN80 flange DN125 flange DN150 flangeSensor material PP , PVDF or PTFE PP or PVDFHousing materialAccuracy *Paint coated aluminium or plastic (PBT)± (0.2% of measured distance + 0.05 % of range)Ingress protection Sensor: IP 68 Housing: IP 67Process temperature – 30°C ... + 90°COutputSE/SG-3 4…20 mA max. 600 Ohm, HART, Relay (SPDT) 30V DC, 1A DCST/SB-4** 4…20 mA max. 600 ohm, HART, Relay 1 (SPDT) 250V AC, 3 A AC1, Relay 2 (SPDT) 30 V DC, 1 A DCPower supplyElectrical connectionSE/SG-3ST/SB-412…36 V DC / 48 …720 mW85…255 V AC / 2 VA or 20…28 V AC/DC / 3 VA/3 WStandard version: 2 x M20x1.5 plastic cable gland: Cable: Ø6 … 12 mmEx version: 2 x M20x1.5 metal cable gland: Cable: Ø 7 … 13 mmWire cross section: 0.5 … 1.5 mm 2Ex marking ATEX II 1 G EEx ia IIB T6 (available for 2-wire series only!) –* Under optimum conditions and stabilized transducer temperature.** Two parallel operating relays.STAINLESS STEEL SENSOR VERSIONSAP-100displayTypeEchoTREK transmitterswith stainless steel flushface transducers for liquids(2 or 4 wire)SoS-o6o-oSoM-o6o-oSoS-o4o-oSoM-o4o-oSoS-o2o-oSoM-o2o-oMax. measuring range 7 m 12 m 15 mMin. measuring range 0.4 m 0.55 m 0.65 mProcess connection DN80 flange DN125 flange DN150 flangeSAP-200displaySensor materialHousing materialProcess temperatureStainless steelPaint coated aluminium or plastic (PBT)–30°C … + 100°C (CIP 120°C for max. 2 hours)45

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKLEVEL TRANSMITTERSEchoTREK S-49/48/47 - 4-wire versionsCompact ultrasonic level transmitters with process current / HART and DPDT control relay output for liquidsSenSonic transducer technology, QUEST+ advanced, process adaptive signal processing,secondary lightning protection, fully temperature compensatedHousing: aluminium or plastic with IP67 / NEMA 6Local programming: full feature programming with SAP-200 includingflow metering, relay, 32-point linearisation, application optimisation, fixed target suppression, etc.Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.Data logging feature: Datascope software (included on DVD)TypeBase price in HRKS XX 4 X X9 0.2-4 m* (80 kHz, Process connection: 1 1/2”) 4630,008 0.25-6 m* (80 kHz, Process connection: 2”) 4630,007 0.35-8 m* (60 kHz, Process connection: 2”) 5350,00EchoTREK S-49Programmer and local indicator (SAP-200)Add on prices in HRKS X 4 XX XT Not included 0,00B Included 439,00Housing / Transducer materialAdd on prices in HRKS X 4 XX XPlastic housing (PBT glass fibre reinforced)P Polypropylene (PP) 0,00V PVDF 275,00F PTFE 667,00Aluminium housing (Paint coated)A Polypropylene (PP) 140,00B PVDF 415,00T PTFE 808,00EchoTREK S-48MountingAdd on prices in HRKS XX 4 X X0 BSP thread 0,00N NPT thread 0,00Power supply / OutputAdd on prices in HRKS XX 4 XX85-255 V AC1 4-20 mA + DPDT Relay 0,003 4-20 mA + HART + DPDT Relay 688,00G 4-20 mA + HART + DPDT Relay + Data logging feature 1160,00K 4-20 mA + DPDT + Data logging feature 468,0024 V AC/DC2 4-20 mA + DPDT Relay 0,004 4-20 mA + HART + DPDT Relay 688,00H 4-20 mA + HART + DPDT Relay + Data logging feature 1160,00L 4-20 mA + DPDT + Data logging feature 468,00EchoTREK S-47S 4 * Measuring ranges for the PTFE version:PTFES-49 0.2-3 mS-48 0.25-5 mS-47 0.35-6 mAccessories to orderTypePrices in HRKS A P 2 0 0 Plug-in programmer/display module (See "Electronic acc.") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00Mounting bracketsfor process connection: BSP 2"S AA 1 0 7 3 200 mm 403,00S AA 1 0 8 3 500 mm 1040,00S AA 1 0 9 3 700 mm 1260,00for process connection: BSP 1 1/2"NIV24S AA 1 0 7 4 200 mm 403,00 EchoTREK STA-480-1S AA 1 0 8 4 500 mm 1040,00 SAP-200S AA 1 0 9 4 700 mm 1260,00 SAT-30446

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKEchoTREK S-46/44/42 - 4-wire versionsCompact ultrasonic level transmitters with process current / HART and DPDT output for liquidsSecondary lightning protection, fully temperature compensatedHousing: aluminium or plastic with IP67 / NEMA 6Local programming: full feature programming with SAP-200 includingflow metering, relay, 32-point linearisation, application optimisation, fixed target suppression, etc.Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.Data logging feature: Datascope software (included on DVD)TypeBase price in HRKS XX 4 X X6 0.35-10 m (60 kHz, Min. required flange size: DN80) 5360,004 0.45-15 m (40 kHz, Min. required flange size: DN125) 5740,002 0.6-25 m (20 kHz, Min. required flange size: DN150) 7290,00EchoTREK S-46LEVEL TRANSMITTERSProgrammer and local indicator (SAP-200)Add on prices in HRKS X 4 XX XT Not included 0,00B Included 439,00Housing / Transducer materialAdd on prices in HRKS X 4 XX XPlastic housing (PBT glass fibre reinforced)P Polypropylene (PP) 0,00V PVDF 275,00Aluminium housing (Paint coated)A Polypropylene (PP) 140,00B PVDF 415,00MountingAdd on prices in HRKS XX 4 X XDIN flanges: Polypropylene (PP), drilled like PN162 DN80 PN16 234,003 DN100 PN16 271,004 DN125 PN16 309,005 DN150 PN16 346,006 DN200 PN16 421,00RF ANSI flanges: Polypropylene (PP), drilled like 150 psiA 3" RF 150 psi 234,00B 4" RF 150 psi 271,00C 5" RF 150 psi 309,00D 6"RF 150 psi 346,00E 8" RF 150 psi 421,00JIS flanges: Polypropylene (PP), drilled like 10KG 10K 80A 234,00H 10K 100A 271,00P 10K 125A 309,00R 10K 150A 346,00S 10K 200A 421,00Mounting bracketsK 200 mm mounting bracket, paint coated steel 403,00L 500 mm mounting bracket, paint coated steel 1040,00M 700 mm mounting bracket, paint coated steel 1260,00Power supply / OutputAdd on prices in HRKS XX 4 XX85-255 V AC1 4-20 mA + DPDT 0,003 4-20 mA + HART + DPDT 688,00G 4-20 mA + HART + DPDT + Data logging feature 1160,00K 4-20 mA + DPDT + Data logging feature 468,0024 V AC/DC2 4-20 mA + DPDT 0,004 4-20 mA + HART + DPDT 688,00H 4-20 mA + HART + DPDT + Data logging feature 1160,00L 4-20 mA + DPDT + Data logging feature 468,00S 4 EchoTREK S-46EchoTREK S-46Accessories to orderTypePrices in HRKS A P 2 0 0 Plug-in programmer/display module (See "Electronic acc.") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,0047

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKLEVEL TRANSMITTERSEchoTREK S-46/44/42 - 4-wire versions - with stainless steel faceCompact ultrasonic level transmitters with process current / HART and DPDT output for liquidswith flush flange mountingSecondary lightning protection, fully temperature compensatedHousing: aluminium or plastic with IP67 / NEMA 6Local programming: full feature programming with SAP-200 includingflow metering, relay, 32-point linearisation, application optimisation, fixed target suppression, etc.Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.Data logging feature: Datascope software (included on DVD)TypeBase price in HRKS XX 4 X X6 0.4-7 m (60 kHz, flange size: DN80) 6830,004 0.55-12 m (40 kHz, flange size: DN125) 7910,002 0.65-15 m (20 kHz, flange size: DN150) 10500,00EchoTREK S-46Programmer and local indicator (SAP-200)Add on prices in HRKS X 4 XX XT Not included 0,00B Included 439,00Housing / Transducer materialAdd on prices in HRKS X 4 XX XPlastic housing (PBT glass fibre reinforced)M Stainless Steel (AISI SS316Ti, DIN 1.4571) 0,00Aluminium housing (Paint coated)S Stainless Steel (AISI SS316Ti, DIN 1.4571) 140,00MountingAdd on prices in HRKS XX 4 X XDIN flanges, drilled like PN16:2 DN80 PN16 (only for S-46) 0,004 DN125 PN16 (only for S-44) 0,005 DN150 PN16 (only for S-42) 0,00Power supply / OutputAdd on prices in HRKS XX 4 XX85-255 V AC1 4-20 mA + DPDT 0,003 4-20 mA + HART + DPDT 688,00G 4-20 mA + HART + DPDT + Data logging feature 1160,00K 4-20 mA + DPDT + Data logging feature 468,0024 V AC/DC2 4-20 mA + DPDT 0,004 4-20 mA + HART + DPDT 688,00H 4-20 mA + HART + DPDT + Data logging feature 1160,00L 4-20 mA + DPDT + Data logging feature 468,00EchoTREK S-44EchoTREK S-42S 4 Accessories to orderTypePrices in HRKS A P 2 0 0 Plug-in programmer/display module (See "Electronic acc.") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,0048

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKEchoTREK S-39/38/37 - 2-wire versionsCompact ultrasonic level transmitters with current / HART and control relay output for liquidsHousing: aluminium or plastic with IP67 / NEMA 6Power supply: 12-36 V DCEx marking: ATEX x II 1 G EEx ia IIB T6ProgrammingWith 4 buttons: 4/20 mA (with real level), Error indication and Damping timeWith SAP-200 display: full feature programming, including: flow metering, 32-point linearisation,application optimisation, fixed target suppression, etc.Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.EchoTREK S-39LEVEL TRANSMITTERSTypeBase price in HRKS XX 3 X X9 0.2-4 m* (80 kHz, Process connection: 1 ½”) 4110,008 0.25-6 m* (80 kHz, Process connection: 2”) 4110,007 0.35-8 m* (60 kHz, Process connection: 2”) 4770,00Programmer and local indicator (SAP-200)Add on prices in HRKS X 3 XX XE Not included 0,00G Included 439,00Housing / Transducer materialAdd on prices in HRKS X 3 XX XPlastic housing (PBT glass fibre reinforced)P Polypropylene (PP) 0,00V PVDF 275,00F PTFE 667,00Aluminium housing (Paint coated)A Polypropylene (PP) 140,00B PVDF 415,00T PTFE 808,00MountingAdd on prices in HRKS XX 3 X X0 BSP thread 0,00N NPT thread 0,00Output / ApprovalAdd on prices in HRKS XX 3 XX1 4-20 mA with data logging feature / none 468,002 4-20 mA / none 0,003 4-20 mA with HART and data logging feature / none 1160,004 4-20 mA with HART / none 688,005 4-20 mA with data logging feature / Ex 1220,006 4-20 mA / Ex 748,007 4-20 mA with HART and data logging feature / Ex 1900,008 4-20 mA with HART / Ex 1440,00L 4-20 mA with data logging feature / Relay 723,00R 4-20 mA / Relay 255,00A 4-20 mA with data logging feature / HART / Relay 1410,00H 4-20 mA / HART / Relay / none 943,00P Profibus 935,00E Profibus / Ex ** 1680,00S 3 * Measuring ranges for the PTFE version:PTFES-39 0.25-3 mS-38 0.25-5 mS-37 0.35-6 m** Under developmentEchoTREK S-38EchoTREK S-37Accessories to orderTypePrices in HRKS FAFlanges (See "Mounting accessories")S A P 2 0 0 Plug-in display module (See "Electronic accessories") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00S AK 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00Bracketsfor process connection: BSP 2"S AA 1 0 7 3 200 mm 403,00S AA 1 0 8 3 500 mm 1040,00S AA 1 0 9 3 700 mm 1260,00for process connection: BSP 1 1/2"NIV24S AA 1 0 7 4 200 mm 403,00 EchoTREK SEP-380-2S AA 1 0 8 4 500 mm 1040,00 SAP-200S AA 1 0 9 4 700 mm 1260,00 SAT-30449

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKLEVEL TRANSMITTERSEchoTREK S-36/34/32 - 2-wire versionsCompact ultrasonic level transmitters with current / HART and control relay output for liquidsHousing: aluminium or plastic with IP67 / NEMA 6Power supply: 12-36 VDCEx marking: ATEX x II 1 G EEx ia IIB T6ProgrammingWith 4 buttons: 4/20 mA (with real level), error indication and damping timeWith SAP-200 display: full feature programming, including: flow metering, 32-pointlinearisation, application optimisation, fixed target suppression, etc.Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.TypeBase price in HRKS XX 3 X X6 0.35-10 m (60 kHz, Min. required flange size: DN 80) 4770,004 0.45-15 m (40 kHz, Min. required flange size: DN 125) 5110,002 * 0.6-25 m (20kHz, Min. required flange size: DN 150) 6530,00Programmer and local indicator (SAP-200)Add on prices in HRKS X 3 XX XE Not included 0,00G Included 439,00Housing / Transducer materialAdd on prices in HRKS X 3 XX XPlastic housing (PBT glass fibre reinforced)P Polypropylene (PP) 0,00V PVDF 275,00Aluminium housing (Paint coated)A Polypropylene (PP) 140,00B PVDF 415,00MountingAdd on prices in HRKS XX 3 X XDIN flanges: Polypropylene (PP), drilled like PN16:2 DN80 PN16 234,003 DN100 PN16 271,004 DN125 PN16 309,005 DN150 PN16 346,006 DN200 PN16 421,00RF ANSI flanges: Polypropylene (PP), drilled like 150 psiA 3" RF 150 psi 234,00B 4" RF 150 psi 271,00C 5" RF 150 psi 309,00D 6"RF 150 psi 346,00E 8" RF 150 psi 421,00JIS flanges: Polypropylene (PP), drilled like 10KG 10K 80A 234,00H 10K 100A 271,00P 10K 125A 309,00R 10K 150A 346,00S 10K 200A 421,00K 200 mm mounting bracket (Paint coated steel) 403,00L 500 mm mounting bracket (Paint coated steel) 1040,00M 700 mm mounting bracket (Paint coated steel) 1260,00Output / ApprovalAdd on prices in HRKS XX 3 XX1 4-20 mA with data logging feature / none 468,002 4-20 mA / none 0,003 4-20 mA with HART and data logging feature / none 1160,004 4-20 mA with HART / none 688,005 4-20 mA with data logging feature / Ex 1220,006 4-20 mA / Ex 748,007 4-20 mA with HART and data logging feature / Ex 1900,008 4-20 mA with HART / Ex 1440,00L 4-20 mA with data logging feature / Relay 723,00R 4-20 mA / Relay 255,00A 4-20 mA with data logging feature / HART / Relay 1410,00H 4-20 mA / HART / Relay 943,00P Profibus 935,00E Profibus / Ex** 1680,00S 3 EchoTREK S-36EchoTREK S-34EchoTREK S-32Accessories to orderTypePrices in HRKS A P 2 0 0 Plug-in display module (See "Electronic accessories") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00S AK 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00* Ex version not available** Under development50

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR LIQUIDSEchoTREKEchoTREK S-36/34/32 - 2-wire versions – with stainless steel faceCompact ultrasonic level transmitters with current output / HART communication for liquidsSenSonic transducer technology, QUEST+ advanced, process adaptive signal processing,secondary lightning protection, fully temperature compensated, optional HART and datalogging featureHousing: aluminium or plastic with IP67 / NEMA 6Power supply: 12-36 VDCEx marking: ATEX x II 1 G EEx ia IIB T6Programming:With 4 buttons: 4/20 mA (with real level), error indication and damping timeWith SAP-200 display: full feature programming, including: flow metering, 32-pointlinearisation, application optimisation, fixed target suppression, etc.Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.EchoTREK S-36LEVEL TRANSMITTERSTypeBase price in HRKS XX 3 X X6 0.4-7 m (60 kHz, flange size: DN 80) 6240,004 0.55-12 m (40 kHz, flange size: DN 125) 7270,002 * 0.65-15 m (20 kHz, flange size: DN 150) 9710,00Programmer and local indicator (SAP-200)Add on prices in HRKS X 3 XX XE Not included 0,00G Included 439,00Housing / Transducer materialAdd on prices in HRKS X 3 XX XPlastic housing (PBT glass fibre reinforced)M Stainless Steel (AISI SS316Ti, DIN 1.4571) 0,00Aluminium housing (Paint coated)S Stainless Steel (AISI SS316Ti, DIN 1.4571) 140,00MountingAdd on prices in HRKS XX 3 X XDIN flanges: drilled as PN16:2 DN80 PN16 (only for S-36) 0,004 DN125 PN16 (only for S-34) 0,005 DN150 PN16 (only for S-32) 0,00Output / approvalAdd on prices in HRKS XX 3 XX1 4-20 mA with data logging feature / none** 468,002 4-20 mA / none 0,003 4-20 mA with HART and data logging feature / none 1160,004 4-20 mA with HART / none 688,005 4-20 mA with data logging feature / EEx** 1220,006 4-20 mA / EEx 748,007 4-20 mA with HART and data logging feature / EEx 1900,008 4-20 mA with HART / EEx 1440,00L 4-20 mA with data logging feature / Relay 723,00R 4-20 mA / Relay 255,00A 4-20 mA with data logging feature / HART / Relay 1410,00H 4-20 mA / HART / Relay 943,00P Profibus 935,00E Profibus / Ex** 1680,00EchoTREK S-34EchoTREK S-32S 3 * Ex version not available** Under developmentAccessories to orderTypePrices in HRKS A P 2 0 0 Plug-in display module (See "Electronic accessories") 439,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S AT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S AK 3 0 5 2 HART-USB/RS485 modem 2090,00S AK 3 0 5 6 HART-USB/RS485 modem / Exia 2280,0051

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR SOLIDSEchoTREKLEVEL TRANSMITTERSGENERAL DESCRIPTIONEchoTREK compact level transmitters for free flowing solids featuring SenSonic narrow beam angle transducers are offered for solids level monitoring - where previously only morecomplex, two part systems have performed. With the high efficiency SenSonic transducers, giving superb signal transmission, plus the QUEST+ software, using advanced processadaptive signal processing for reliable echo monitoring, EchoTREK units overcome filling noise, dusting and irregular surface formations in most cases to give a high performance,compact, powder and solids level measurement transmitter.MAIN FEATURESPower relay output forcontrol and alarmMeasuring range up to 60 mPossibility of metering during fillingNarrow beam angle,highly efficient transducersSpurious echo rejectionFull temperature compensationDust-Ex approvalEchoTREK FUNCTIONSFor solidsEchoTREKSTD/SBD-300RelayHARTDust ExDisplaySAP-100APPLICATIONSFor almost all free flowing solidsLevel, volume or weight calculationReliable measurement in challengingapplications suchas dusting during fillingCERTIFICATIONSATEXII 1/2 D IP 65 T130°CTECHNICAL DATAType STD/SBD-34o-o STD/SBD-33o-o STD/SBD-31o-oEchoTREKlevel transmittersfor solids (4-wire)SAP-100 displayApplicationMonitoring of smalltanks, chutes, conveyerbelts with narrowmeasuring rangePowders, powderygranules with narrow/medium measuringrange. Non-powderygranules with mediummeasuring rangePowders, powderygranules, non-powderygranules with widemeasuring rangeMax. measuring range 15 m 30 m 60 mMin. measuring range 0.5 m 0.6 m 1 mTotal beam angle 5°Process connectionFlange with aimerSensor materialPlastic or aluminium sensor with foam facingHousing materialPaint coated aluminiumAccuracy *± (0.2% of measured distance + 0.05 % of range)Ingress protection Sensor: IP 65 Housing: IP 67Ambient temperature-30°C ... +60°C, with SAP-100 display: -25°C ... +60°CProcess temperature –30°C … + 75°COutput4…20 mA max. 600 Ohm, HART, Relay (SPDT) 250V AC 3A AC1Power supply 85…255 V AC / 6.8 VA or 11.4…40 V DC / 4.1 W and 11.4…28 V AC / 4.6 VAEx marking ATEX II 1/2 D IP65 T130°C* Under optimum conditions and stabilized transducer temperature52

LEVEL TRANSMITTERSULTRASONIC COMPACT LEVEL TRANSMITTERS FOR SOLIDSEchoTREKEchoTREK S-34/33/31 - 4-wire versionsCompact ultrasonic level transmitters with process current / HART and control relay outputfor solidsSenSonic transducer technology, QUEST+ advanced, process adaptive signal processing,secondary lightning protection, fully temperature compensatedElectronics: Paint coated Aluminium enclosure, IP67 / NEMA 6Transducer: Paint coated Aluminium, Polyurethane face, IP65 / NEMA 4Ex marking: ATEX x II 1/2 D IP 65 T 130°CProgramming:With SAP-100 display: full feature programming, including: 32-pointlinearisation, application optimisation, fixed target suppression, etc.Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.LEVEL TRANSMITTERSTypeBase price in HRKSXD 3 J X4 0.6-15 m 6700,003 0.6-30 m 7740,001 1.2-60 m 8820,00Programmer and local indicator (SAP-100)Add on prices in HRKS D 3 X J XT Not included 0,00B Included 491,00-Power supply / Output / ApprovalAdd on prices in HRKSXD 3 X J 85-255 V AC1 4-20 mA + Relay / none 0,003 4-20 mA + HART + Relay / none 688,005 4-20 mA + Relay / Ex 550,007 4-20 mA + HART + Relay / Ex 1240,0011.4-40 V DC and 11.4-28 V AC2 4-20 mA + Relay / none 0,004 4-20 mA + HART + Relay / none 688,006 4-20 mA + Relay / Ex 550,008 4-20 mA + HART + Relay / Ex 1240,00EchoTREK STD-33, STD-34S D 3 J Accessories to orderTypePrices in HRKS A P 1 0 0 Plug-in Programmer/display module (See "Electronic acc.") 491,00SF AFlanges (See "Mounting accessories")S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00EchoTREK STD-3153

LEVEL TRANSMITTERSULTRASONIC ACCESSORIESLEVEL TRANSMITTERSOrder codes for separate flangesNIVOSONAR SFAFlanges for ultrasonic devicesMaterial: Polypropylene (PP)TypeBase price in HRKS F A 3XX 0,00Flange sizeAdd on prices in HRKS F A 3 XDIN flanges, drilled like PN162 DN80 PN16 234,003 DN100 PN16 271,004 DN125 PN16 309,005 DN150 PN16 346,006 DN200 PN16 421,007 DN250 PN16 486,008 DN300 PN16 580,00RF ANSI flanges, drilled like 150 psiA 3" FF 150 psi 234,00B 4" FF 150 psi 271,00C 5" FF 150 psi 309,00D 6" FF 150 psi 346,00E 8" FF 150 psi 421,00Y 12” FF 150psi 580,00JIS flanges, drilled like 10KG 10K 80A 234,00H 10K 100A 271,00P 10K 125A 309,00R 10K 150A 346,00S 10K 200A 421,00Z 10K 300A 580,00Flange typeAdd on prices in HRKS F A 3X1 For units with 1" BSP process connection 0,003 For units with 2" BSP process connection 0,004 For units with 2" NPT process connection 0,005 For mounting to SAA-102 aiming device 196,006 For units with 1 1/2" BSP process connection 0,007 For units with 1 1/2" NPT process connection 0,00SFA 3Order codes for separate mounting bracketsSAA-107TypeBase price in HRKfor process connection: BSP 1"S A A 1 0 7 0 200 mm mounting bracket 403,00S A A 1 0 8 0 500 mm mounting bracket 1040,00S A A 1 0 9 0 700 mm mounting bracket 1260,00for process connection: BSP 2"S A A 1 0 7 3 200 mm mounting bracket 403,00S A A 1 0 8 3 500 mm mounting bracket 1040,00S A A 1 0 9 3 700 mm mounting bracket 1260,00for process connection: BSP 1 1/2"S A A 1 0 7 4 200 mm mounting bracket 403,00S A A 1 0 8 4 500 mm mounting bracket 1040,00S A A 1 0 9 4 700 mm mounting bracket 1260,00SAA-108, SAA-10954

LEVEL TRANSMITTERSTRANSMITTER ACCESSORIESUNIDISP SAP-100Plug-in programming and display module for 4-wire EchoTREK ST-300Field indications: 6 digits LCD, icons and bargraphHousing: PBT glass fibre reinforced plasticAmbient temperature: -25°C…+60°CTypePrice in HRKS A P 1 0 0 491,00UNIDISP SAP-20Plug-in display module for 2-wire transmitters; see below (same module with different labels)Field indications: 6 digits LCD, icons and bargraphAmbient temperature: -25°C…+60°CSAP-100LEVEL TRANSMITTERSLabel typePrice in HRKS A P 2 00 Module with label for 2-wire and S-400 EchoTREK 439,001 Module with label for NIVOTRACK 439,002 Module with label for NIVOCAP, THERMOCONT, UNICONT PD 439,003 Module with label for NIVOPRESS 439,00UNIDISP SAP-300Plug-in dot matrix (128x64) graphical display for 2-wire transmittersMeasured value, bar graph displayTypePrice in HRKS A P 3 0 0 For MicroTREK, NIVOTRACK, AnaCONT 544,00SAP-200UNICOMM SAT-306eLINKPlug-in unit for software/firmware updatesTypePrice in HRKS A T 3 0 6 544,00EView 2 SAS-303Eview 2 HART configuration software packagefor remote programming and viewing of primary measurement values in HART multidropsystems (up to 15 field devices)Operating system: Windows XP, Windows 7TypePrice in HRKS A S 3 0 3 5140,00SAP-300NIV24EchoTREK SAP-100SAP-200SAP-30055

LEVEL TRANSMITTERSNOTESLEVEL TRANSMITTERS56

LEVEL SWITCHESGENERAL DESCRIPTIONFLOAT SWITCHESNIVOFLOATThe most frequent level instrumentation task is thelevel controlling and limit level switching even if themeasurement medium is liquid or solid.This is the reason why NIVELCO focus on levelswitches besides the level transmitters. The totallyown developed and manufactured instrumentsoffer reliable level controlling and limit levelswitching solution for most media from potablewater to sewage, aggressive alkalis and acids, orfree-flowing, powdered, bulk or granular solids.Thanks to this very wide level switch selection we areable to provide suitable instruments for most levelinstrumentation applications.Most of our level switches have explosion-proofversions (in accordance to ATEX and/or IEC Ex).Moreover we offer suitable solutions for specialrequirements, for example the ship-building industrywith a need for Germanischer Lloyd (GL), Det NorskeVeritas (DNV), Bureau Veritas (BV) or SIL approvals.Hermetically moulded, double chamberAdjustable switch differentialMax. 20 m cable lengthMax. +50°C medium temperatureMax. 2 bar process pressureLevel switch from potable water to sewageLow specific weight of the floating bodyFail-safe indication and pump controlSuitable also for tanks and basinsCONDUCTIVE LEVEL SWITCHESNIVOCONT KLow cost level switchLimit switch ordifferential switch versionsAdjustable sensitivityAdjustable time delayAll wetted parts stainless steelCompact and separated typesFor liquids withmin. 10 μS/cm conductivityRod probes up to 3 mpage 59page 61LEVEL SWITCHESMAGNETIC COUPLING SWITCHESNIVOMAGOperation without power supplyMicro-switch separated from the processAll wetted parts stainless steelFixed or adjustable switch differentialSubmersible versionsFor liquids with min. 0.7 kg/dm 3 densityExplosion-proof modelsMarine approvals, SIL approvalpage 6557

LEVEL SWITCHESMAGNETIC TRACKING SWITCHESNIVOPOINTVIBRATING FORK LEVEL SWITCHESNIVOSWITCH for LIQUIDSLEVEL SWITCHESOperation without power supplyReed switches separated from processStainless steel probe and floatPFA coated probe version with plastic floatUp to 5 switch pointsFor liquids with min. 0.5 kg/dm 3 densityMulti-point level switch in closed tanksExplosion-proof modelsFor most liquids with min. 0.7 kg/dm 3density and max. 10 4 mm 2 /s viscosityNo moving partsSelf-cleaning for most mediumsStainless steel andplastic coated forksRigid rod extension up to 3 mExplosion-proof modelsIP67, IP68 protectionpage 69page 80VIBRATING ROD LEVEL SWITCHESNIVOCONT RROTARY PADDLE LEVEL SWITCHESNIVOROTAFor granular solids withmin. 0.05 kg/dm 3 densityRod or cable extension up to 20 mStainless steel vibrating sectionSelectable densityPlastic or aluminium housingRelay or electronic switch outputIP67 protectionExplosion-proof modelspage 74For granular solids withmin. 0.1 kg/dm 3 densityPlastic or aluminium housingStainless steel wetted partsMotor shut-off featureSingle or 3-vane paddlesRod or cable extended versions up to 3 mHigh temperature versionIP67 protectionExplosion-proof modelspage 90VIBRATING FORK LEVEL SWITCHESNIVOSWITCH for SOLIDSRF CAPACITANCE LEVEL SWITCHESNIVOCAP CKFor powdered solids withmin. 0.01 kg/dm 3 densityNo moving partsStainless steel forksSelf-cleaning for most mediumsRigid rod extension up to 3 mIP67, IP68 protectionExplosion-proof modelspage 80For solids with ε r ≥ 1.5 and liquidsFor adhering, sticky materialsEasy calibrationSelectable sensitivityNot sensitive to depositsRod or cable extended versionsup to 10 mHigh temperature versionIP67 protectionExplosion-proof modelspage 9458

LEVEL SWITCHESFLOAT LEVEL SWITCHESNIVOFLOATGENERAL DESCRIPTIONThe NIVOFLOAT NL-100 type floating level switch is suitable for level switching of various kinds of water, the NIVOFLOAT NW-100 type tilting float level switch is suitablefor level switching of various liquids, especially sewage in shafts, tanks, basins or cisterns. The double-chambered float is made of injection moulded tough polypropylenethat ensures good waterproof protection. The contacting microswitch is incorporated in the float.The cable of the NIVOFLOAT level switch is fed through the waterproof passage into the monolithic structure of the injection moulded plastic housing. The cable of the levelswitch is a flexible insulated copper cable with 3x1 mm 2 cross section and PVC or Neopren outer insulation. Different control tasks such as liquid level monitoring and pumpcontrol can be realized successfully with NIVOFLOAT.NIVOFLOAT NL-100NIVOFLOAT NW-100LEVEL SWITCHESMAIN FEATURESDouble-chambered floatSwitching differential is adjustable by counterweightMaximum 20 m cable lengthMedium temperature max. +50°CProcess pressure max. 1 barIP 68 protectionMAIN FEATURESSpecial float shapeDouble-chambered floatMaximum 20 m cable lengthMedium temperature max. +50°CProcess pressure max. 2 barIP 68 protectionAPPLICATIONSFor potable waterFor industrial and communal sewageTank filling / emptying controlFor overfill protectionAPPLICATIONSFor industrial and communal sewageSuitable also for drinking waterTank filling / emptying controlFor overfill protectionNMW-100counterweightNL-100float level switchNW-100float level switchTECHNICAL DATA (NL)TypeNLo-1-oo-oSwitching angle ± 45°Medium temperature0°C ... +50°CMedium pressure0,1 MPa (1 bar)Material of the floatPolypropyleneMaterial of the counterweightPolystyreneFloat volume 430 cm 3Rating of the microswitch10(4) A, 250V AC, AC1Electrical life-span10 7 switchesMechanical protection IP 68Cable Ø 9 mm / 3 x 1 mm 2Cable length5 m, 10 m, 20 mMass250 g, without cableTECHNICAL DATA (NW)TypeNWo-1-oo-1Switching differential~ 400 mm (constant)Medium temperature0°C … +50°CMedium pressure0,2 MPa (2 bar)Material of the floatPolypropyleneFloat volume 1000 cm 3Rating of the microswitch10(3) A, 250V AC, AC1Electrical life-span10 7 switchesMechanical protection IP 68Cable Ø 9 mm, 3 x 1 mm 2Cable length5 m, 10 m, 20 mMass1.1 kg, without cable59

LEVEL SWITCHESMŰANYAG FLOAT LEVEL SZINTKAPCSOLÓKSWITCHESNIVOFLOATLEVEL SWITCHESNIVOFLOAT NDouble-chamber float level switch with mercury-free operated micro-switch, with PVC or Neoprene cableHousing material: Non toxic copolymer polypropyleneMax. temperature: 50°CTypeBase price in HRKN X 1XX 1L For clean water 109,00W For waste water 527,00Cable materialAdd on prices in HRKNX 1XX 1N Neoprene 0,00P PVC 0,00Cable lengthAdd on prices in HRKNXX 1 1PVC cable0 5 5 m 65,901 0 10 m 132,002 0 20 m 264,00Neoprene cable0 5 5 m 131,001 0 10 m 262,002 0 20 m 524,00N 1 1NIVOFLOAT NL-100NIVOFLOAT NW-100NIVOFLOAT NL counterweight (only for NL_ type)Price in HRKNMW 1 0 0 16,20Material: PolystyreneAvailable on request: Non-standard lengths for over 100 pcs.NIVOFLOAT NMW-10060

LEVEL SWITCHESCONDUCTIVE LEVEL SWITCHESNIVOCONT KGENERAL DESCRIPTIONLevel switches, based on the conductivity principle, can be applied to liquids with conductivity higher than 10 μS/cm. For detecting the level, probes are immersed into thetank. These probes (and the tank wall if conductive) serve as contacts of an electric circuit. Probes can be of single or multiple rod versions. A maximum of 4 probe rods canfit in the multiple probe with an additional reference probe if tank wall is not conductive. The probe length should be in accordance with the level to be detected. When theliquid level reaches the probe, it will create a short-circuit and the output relay will be activated. The device senses the conductivity difference between the probes and thereference probe. The KLP separators should be used at every 0.5 m to provide suitable distance between the probes.MAIN FEATURESKRK-512Level switchingFilling-emptying controlSelectable NO/NC relayfunctionAdjustable sensitivityAdjustable delay ON anddelay OFF timeDelay time displayAC/DC versionsLevel switchesCompact level switchesKKH-2o2Probe and relay in one unit1 or 2 incorporated KRK-512 electronics1 or 2 independent relay outputs for pump controlor differential level switchingSelectable NO/NC relay functionAdjustable sensitivityAdjustable delay ON and delay OFF timeDelay time displayAC/DC versionsKRK-5222 independent relay outputsfor 1 level2 independent relay outputsfor 2 independent levels2 relay outputs for pump controlSelectable NO/NC relayfunctionAdjustable sensitivityAdjustable delay ON anddelay OFF timeAC/DC versionsVERSIONSLevel switch and probeDIN rail mounted 1 or 2 channelswitching unitProbe set with aluminium or plastichousing featuring 1 1/2" BSP processconnectionProbe-rods up to 3mCompact level switch1 or 2 channel switching unit inplastic housing with 1 1/2" BSPprocess connectionProbe-rods up to 3mAPPLICATIONSFor conductive liquids with min 10 μS/cm conductivityFor empting / filling control or level switch tasksFail-safe indication and pump controlWater inrush indicatorLEVEL SWITCHESKRK-512-5KRK-522-oKSH-3ooKSH-2ooKKH-2o2-561

LEVEL SWITCHESCONDUCTIVE LEVEL SWITCHESNIVOCONT KTECHNICAL DATALEVEL SWITCHESProbesSingle ProbeKSP-201 KSS-201SubmersibleKSN-201Aluminium housingKSH-202KSH-203KSH-204Multi ProbePlastic housingNumber of probes 1 2+s* 3+s* 4+s* 1+s* 2+s* 3+s* 4+s* 1KSH-301KSH-302KSH-303KSH-304CableProcess connection 3/8” BSP 1 1/2” BSPmountableProbe socket material PP carbon steel 1.4571 1.4571 PP –Housing – Aluminium cast PBT ABSInsulation of socket PP PFA – –Medium temperaturemax.+80 °Cmax. +200 °C max. +80 °CPressure maxmax.0.3 MPa(3 bar)max. 1.6 MPa (16 bar) max. 0.3 MPa (3 bar) –Electrical connection With rubber cap M20x1.5 cable gland, cable diameter: 6…12mm Pg9**MIngress protection IP 20 IP 65 IP 68Mass(without probe)0.1 kg 0.4 kg 0.05 kg*s = reference probe ** Cable: Ø 4…7 mmLEVEL SWITCHESType KRK-512-5 KRK-522-oPower supply (U n )Galvanic isolated24…240 V AC/DC–15 %…+10%110 V AC,230 V AC24 VAC/DCPower consumption max. 2.5 VA / W max. 4.5 VA / WAmbient temperature –20 °C…+55 °CProbe voltage 3.5 V AC 5 V ACProbe current max. 0.2 mA AC max. 1 mA ACSensitivityAdjustable: 5 kOhm…100 kOhmCable capacitance100 nF (100 kOhm sens.)800 nF (5 kOhm sens.)max. 4 nFFixed on-delay (t 1 ) 1.5 sec –On and off-delayRelay output1x SPDT 250 V 8A, AC124 V DC min. 500 mW0.5…10 sec2x SPDT 250V 16A, AC124 V DC min. 500 mWElectrical connection Terminal block, max. 2.5 mm 2 / with insulation 1.5 mm 2Electrical protection Class II. Class II. Class III.MechanicalconnectionDIN EN 60715 railIngress protection IP 20Mass 72 g 240 gCOMPACT LEVEL SWITCHESKSK-201Type KKH-212-5 KKH-222-5Power supply (U n )24 V…240 V AC/DC–15 %…+10%Power consumption max. 2.5 VA / W max. 5 VA / WAmbient temperature –20 °C…+50 °CMedium temperature max. +80 °CMedium pressure1 barNumber of probe 2+s* 4+s*Probe voltageProbe currentSensitivityFixed on-delayOn and off-delayRelay outputElectrical connectionElectrical protectionProcess connectionMaterial of probe socketHousing material3.5 V ACmax. 0.2 mAAdjustable: 5 kOhm…100 kOhm1x SPDT 250 V 8A AC1 /DC 24V 8A1.5 sec0.5…10 sec2x SPDT 250V 8A, AC1 /DC 24V 8ACable gland: 2x M20x1,5 Ø8…15 mm cables,Terminal block, max. 2.5 mm 2 / with insulation 1.5 mm 2Class II.1 1/2” BSPPPPolycarbonateIngress protection IP 67Mass 660 g (without probe) 800 g (without probe)s*=reference probeKSo-201Single probe socketKSK-201Submersible probeKLN-2ooProbeKLP-201Separator for KSH-300KLP-204Separator for KSH-20062

LEVEL SWITCHESCONDUCTIVE LEVEL SWITCHESNIVOCONT KNIVOCONT KSSingle-probe socket for level detection of electrically conductive liquids with KLN electrodes andKR level control unitProcess connection: 3/8" BSP, material: stainless steelTypeBase price in HRKK SX 2 0 1 145,00Socket- / Insulation materialAdd on prices in HRKK S 2 0 1P PP / PP 0,00S Steel / PFA 93,50N Stainless steel / PFA 128,00K S 201NIVOCONT KSN-201LEVEL SWITCHESNIVOCONT KSHMulti-probe socket for level detection of electrically conductive liquids with KLN electrodes andKR level control unitStainless steel, 1 1/2" BSP process connection with PFA insulation and paint coated IP65Alu-cast housingTypeBase price in HRKK SH 0 X2 Aluminium house 969,003 Plastic house 502,00ProbesAdd on prices in HRKK SH 02 2-probes + reference electrode 0,003 3-probes + reference electrode 196,004 4-probes + reference electrode 391,00NIVOCONT KSH-202K SH 0NIVOCONT KLNStainless steel electrode with M6 thread for KS and KKH probe socketTypeBase price in HRKK LN 2 X X 45,10LengthAdd on prices in HRKK LN 2 -0 5 0.5 m 0,001 0 3 0 1-3 m; each started 0.5 m 21,30NIVOCONT KSH-303K LN 2NIVOCONT KLN-2NIVOCONT KSK-201NIVOCONT KLN, PE coatedUse the order code extension below after the standard order code of the device:Special versionAdd on prices in HRKX03 PE coated (up to 100°C); each started 0.5 m 30,60Order example: KLN-210-0-X03NIVOCONT KLPSeparatorTypeBase price in HRKK LP 2 0 4 (for KSH-2) 8,50K LP 2 0 1 (for KSH-3) 8,50NIVOCONT KLP-204NIVOCONT KLP-201NIVOCONT KSKNIV24Submersible probe for conductive liquidsNIVOCONT KSP-201For connection to KR level control unitNIVOCONT KSS-201Electrode: stainless steel, enclosure: ABS, Ø 22x85 mmNIVOCONT KSN-201Type Base price in HRK NIVOCONT KSH-202K S K 2 0 1 75,70 NIVOCONT KSH-203NIVOCONT KSH-204NIVOCONT KLN-205, 210, 215,220, 225 and 230NIVOCONT KLP-20463

LEVEL SWITCHESCONDUCTIVE LEVEL SWITCHESNIVOCONT KNIVOCONT KRK-512Conductive level control switch for KS sockets and KLN probeswith one SPDT power relay, 250 V AC, 8 A, AC1for limit switching or differential switching with time delayMounting: DIN-rail (EN 60715)Power supply: 24-240 V AC/DCTypeBase price in HRKKRK 512 5 383,00LEVEL SWITCHESNIVOCONT KRK-522Conductive level control switch for KS sockets and KLN probeswith two SPDT power relay, 250 V AC, 16 A, AC1for limit switching or differential switching with time delayMounting: DIN-rail (EN 60715)Power supply: 230 V AC, 110 V AC, 24 V AC/DCNIVOCONT KRK-512TypeBase price in HRKKRK 5 2 2 X 508,00Power supplyBase price in HRKKRK 5 2 2 1 230 V AC 0,002 110 V AC 0,004 24 V AC/DC 0,00NIVOCONT KRK-522KRK 522NIVOCONT KKHCompact conductive level switch with 2-probe socket + 1 reference probe or4-probe socket + 1 reference probeComplete with plastic housingIncluding 1 or 2 KRK-512 level control switchesProcess connection: 1 1/2" BSP (plastic) with plastic counter nutOutput: 1 or 2 x SPDT, 8 A / 250 V AC, AC1Power supply: 24-240 V AC/DCTypeBase price in HRKKKH 2 2 51 Single channel (3 probes) 901,002 Double channel (5 probes) 1310,00NIVOCONT KKH-222KKH 2 2 5NIVOCONT KLNStainless steel electrode with M6 thread for KS and KKH probe socketTypeBase price in HRKK LN 2 XX 45,10LengthAdd on prices in HRKK LN 20 5 0.5 m 0,001 0 3 0 1-3 m; each started 0.5 m 21,30NIVOCONT KLN-2K LN 2NIVOCONT KLPTypeBase price in HRKK LP 2 0 1 Separator (for KKH-2_ _) 8,50NIVOCONT KLP-201NIV24NIVOCONT KRK-512-5NIVOCONT KRK-522-1NIVOCONT KLN-205, 210, 215, 220,225 and 230NIVOCONT KKH-212-564

LEVEL SWITCHESMAGNETIC COUPLING LEVEL SWITCHESNIVOMAGGENERAL DESCRIPTIONNIVOMAG MK-200 series magnetic float level switches are used for point level detection and level control of liquids in all types of vessels. Operation principle: the permanent magnetof the float activates the output microswitch by a non-contact coupling system.The great variety of both the top and side mounted versions makes it easy to install the switch in any tank at any location. For the simplest level switching you can select models withfixed hysteresis, while for level control application we offer NIVOMAG switches with adjustable hysteresis. Models with rubber or silicon sleeves can be applied for contaminated liquids.You can fit the NIVOMAG switch with an MMK type tester, to check the switching function even when the liquid levels aren’t changing.MAIN FEATURESMagnetic coupling betweenthe switch and the floatOperation w/o external power supplySide or top mounted versionsUnderwater versionFixed or variable hysteresisMax. 250°C medium temperatureExplosion proof versionIP 65/68 protectionAPPLICATIONSOverflow protectionLevel controlsSupplementary fail safeswitch if combined withother devicesWater tanks, feedwater tanksFuel tanksPower plantsCERTIFICATIONSATEX II 1/2 G EExdme II C T6…T2 (TÜV)IECEx II 2 G EEx dme IIC T6…T2SIL 1 Safety Integrity LevelGermanischer Lloyd (GL)Det Norske Veritas (DNV)Bureau Veritas (BV)TYPE SELECTIONTo assist in the selection of the correct model the following tables and diagrams are provided. When selecting a modeldue consideration must be given to liquid density, mounting position and process connection and to determine if thereis a need for adjustable or fixed hysteresis or a rubber sleeve.Minimum liquid density (kg/dm 3 )Arm length (mm)0 –100 200 300Max. float Ø (mm)1000-300052 0.7 0.8 0.85 –64 0.7 0.8 0.8 –124 – – – 0.7Type MK-21 MK-22 MK-23Fixed switching differentialAdjustable switching differentialStraight armL or Z armSide mountedTop mountedSubmersibleRubber protection sleeve(with „L” arm)Flanged process connection *Threaded process connectionEx versionTester* Only with 92x92 flangeLEVEL SWITCHESMKA-220-oMKA-210-oMKG-210-oMKA-210-o + MMK-120 testerMKA-230-o65

LEVEL SWITCHESMAGNETIC COUPLING LEVEL SWITCHESNIVOMAGTECHNICAL DATALEVEL SWITCHESTypeMKA-21MKU-21Cylindrical float (side and top mounting)MKA-22MKG-21MKV-21MKS-21MKZ-21Ball float (top mounting)MKA-23Nominal pressure 2.5 MPa (25 bar) [MKU: 0.2/2.5 MPa (2 bar/25 bar)] 2.5 MPa (25 bar)Medium temperatureAmbient temperatureLiquid densitysee temperature diagram–20°C…+80°C, Ex version: see temperature specification for Ex version tablemin. 0.7–0.85 kg/dm 3 , see min. liquid density tableSwitching differential Fixed Adjustable Fixed Fixed AdjustableInsertion length 202…521 mm 245…573 mm 202…521 mm 1265…3265 mmMaterial of wetted partsHousing materialStainless steel (1.4571, 1.3960, 1.4404), and MKG: rubber, MKS: siliconePaint coated aluminiumMicroswitch 1 micro-switch with 1 closing and 1 opening contact (NO and NC) *Switch ratingStandardEx version250V 10A AC12; 220V 0.6A DC13250V 2.5A AC12; 220V 0.3A DC13Electrical connection M20x1.5 cable gland, terminal (MKU, MKV, MKZ integrated cable NSSHöu-J 5x1.5 mm 2, Ø15 mm) **Ingress protectionIP65 (MKU, MKV, MKZ IP68 up to 20 m underwater)Electrical protection Class I.Safety integrity levelSIL1Ex marking ATEX 1/2 G EEx dme IIC T6…T2 (TÜV) ; IEC Ex 2 G EEX dme IIC T6…T2Mass 1.8 – 3.5 kg* NO and NC terminals should be connected to equipotential circuits** Cable length should be specified when orderedADDITIONAL DATA FOR EX CERTIFIED MODELSTemperature specification for Ex versionsTemperature classesClass T6 T5 T4 T3 T2Max. mediumtemperatureAmbienttemperatureTemperature diagram:+80°C +95°C +130°C +200°C +250°C–20°C…+60°C–20°C…+70°C–20°C…+80°C–20°C…+80°C–20°C…+80°CMKA-21o-owith threaded process connectionMKA-210-4with „Z” armMKA-21o-owith flanged processconnectionMKA-210-4with „L” armMKU-210-oMFF-110counter flangeMFF-111 counter flange+ MMK-120 tester66

LEVEL SWITCHESMAGNETIC COUPLING LEVEL SWITCHESNIVOMAG MK-21Germanischer Llyod (GL) and Det Norske Veritas certified magnetic float level switchwith fixed switch differentialAll wetted parts stainless steel (1.4571, 1.3960, 1.4404), paint coated Alu-housing with IP65Ex marking: ATEX x II 1/2 G EEx dme IIC T6…T2; IEC Ex 2G EEx dme IIC T6...T2*TypeBase price in HRKMKX 2 1 X X 1610,00VersionAdd on prices in HRKMK 2 1 X XA Standard 0,00G With rubber protection sleeve (not available in Ex version) 301,00S With silicon protection sleeve (not available in Ex version) 401,00U Underwater (IP68) 829,00VUnderwater (IP68), with rubber protection sleeve (not available 1130,00in Ex version)ZUnderwater (IP68), with silicon protection sleeve (not available 1230,00in Ex version)Process connectionAdd on prices in HRKMKX 2 1 X0 Square flange 0,00B 2"BSP** 0,00N 2"NPT** 0,001 DIN DN 80 PN 40, steel** 550,002 DIN DN 100 PN 40, steel** 678,005 DIN DN 80 PN 40, stainless steel** 2260,006 DIN DN 100 PN 40, stainless steel** 2810,00Protrusion / Arm length / ApprovalAdd on prices in HRKMKX 2 1 X 0 202 mm (189 mm for MKA-21B, 178 mm for MKA-21N) 0,001 321 / 100 mm 74,802 421 / 200 mm 84,203 521 / 300 mm 93,504 L or "Z" profile (specify dimensions when ordering) 224,009 202 mm (189 mm for MKA-21B, 178 mm for MKA-21N) / Ex 972,005 321 / 100 mm / Ex 1050,006 421 / 200 mm / Ex 1060,007 521 / 300 mm / Ex 1070,008 "L" or "Z" profile (specify dimensions when ordering) / Ex 1 200,00MK 21 * Need of IEC is to be specified with order ** Not available with protection sleeveNIVOMAG MKA-210-_NIVOMAG MKG-210-_NIVOMAG MKA-210-4ZNIVOMAGLEVEL SWITCHESNIVOMAG MK-22Germanischer Llyod (GL) and Det Norske Veritas certified magnetic float level switchwith adjustable switch differentialAll wetted parts stainless steel (1.4571, 1.3960, 1.4404), paint coated Alu-housing with IP65Ex marking: ATEX x II 1/2 G EEx dme IIC T6…T2TypeBase price in HRKMKX 2 2 X X 2180,00VersionAdd on prices in HRKMK 2 2 X XA Standard 0,00U Underwater (IP68) 829,00Process connectionAdd on prices in HRKMKX 2 2 X0 Square flange 0,001 DIN DN 80 PN 40, steel 550,002 DIN DN 100 PN 40, steel 678,005 DIN DN 80 PN 40, stainless steel 2260,006 DIN DN 100 PN 40, stainless steel 2810,00Protrusion / Arm length / ApprovalAdd on prices in HRKMKX 2 2 X 0 254 mm 0,001 373 / 100 mm 74,802 473 / 200 mm 84,203 573 / 300 mm 93,509 254 mm / Ex 972,005 373 / 100 mm / Ex 1050,006 473 / 200 mm / Ex 1070,007 573 / 300 mm / Ex 1200,00NIVOMAG MKA-210-4LNIVOMAG MKA-21B-0NIVOMAG MKA-21N-0MK 22 NIVOMAG MKA-220Cable for MKU underwater version Price in HRK NIV24To be specified in the order; each started 1 m 80,80 NIVOMAG MKA-210-067

LEVEL SWITCHESMAGNETIC COUPLING LEVEL SWITCHESNIVOMAGLEVEL SWITCHESNIVOMAG MK-23Germanischer Llyod (GL) certified magnetic float level switch with vertical float armand adjustable switch differentialAll wetted parts are made of stainless steel (1.4571, 1.3960, 1.4404), paint coated Alu-housing with IP65Ex marking: ATEX x II 1/2 G EEx dme IIC T6…T2TypeBase price in HRKMKX 2 3 X X 2350,00VersionAdd on prices in HRKMK 2 3 X XA Standard 0,00Process connectionAdd on prices in HRKMKX 2 3 X0 Square flange 0,00Maximum switch differential (S)Protrusion / Arm length / ApprovalAdd on prices in HRKMKX 2 3 X 1 1265 mm / 1000 mm 0,002 2265 mm / 2000 mm 150,003 3265 mm / 3000 mm 302,005 1265 mm / 1000 mm / Ex 972,006 2265 mm / 2000 mm / Ex 1120,007 3265 mm / 3000 mm / Ex 1270,00NIVOMAG MKA-230MK 23 NIVOMAG MFFCounter flange for MK magnetic floatsTypeBase price in HRKM F F 1XX 365,00MaterialAdd on prices in HRKM F F 1 X1 Steel 0,002 Stainless steel (1.3960, 1.4404) 93,50VersionM F F 1XAdd on prices in HRK0 Standard 0,001 For units with MMK-100 tester 28,10M FF 1NIVOMAG MFF-110NIVOMAG MMKTester for MK magnetic floatsTypeBase price in HRKMMK 1 1 0 Steel 663,00MMK 1 2 0 Stainless steel 989,00NIVOMAG MFF-111NIVOMAG MMK-11068

LEVEL SWITCHESMAGNETIC TRACKING LEVEL SWITCHESNIVOPOINTGENERAL DESCRIPTIONNIVOPOINT magnetic float level switches are suitable for level detection, level switching and one- or multipoint level controlling tasks in normal as well as in hazardous areas.The device consists of a probe tube, a float incorporating a magnet and a housing containing the connection terminals. A maximum of 5 switches can be incorporated in the probe.A sliding sleeve on the top of the probe provides for a simultaneous ±25 mm adjustment possibility of the positioning of the switches. The wetted parts of the level switch are madeof stainless steel. The plastic coated versions are suitable for level detecting of aggressive liquids, and the ATEX certified versions are applicable for level switching of explosive materials.Floats and process connections can be selected according to the measured medium and the application.The mini type NIVOPOINT magnetic float level switches are suitable for maximum level indication in small tanks. The small size and easy mounting of the switch allows maximum leveldetection in appliances or tanks using process connections made for different other purposes.MAIN FEATURESLevel switching without auxiliary powerMaximum 5 switching pointsStainless steel andPlastic coated versions150 °C medium temperatureMini versionWide variety of floatsEx versionIP65/68 protectionLEVEL SWITCHESAPPLICATIONSMultipoint level switchingFor controlling pumps, valvesLevel detection of aggressive liquidsLevel switching of explosive liquidsCERTIFICATIONSMZS-100Mini typeATEX II 2 G EEx d II C T3…T6Bureau Veritas (BV) (only for MZo types)TEMPERATURE DATA FOR EX VERSIONSClass T6 T5 T4 T3Max. ambient temp. from.–20 °C +80 °C +95 °C +85 °C +70 °CMax. medium temp. from –20 °C +85 °C +100 °C +135 °C +150 °CSNMRwith biasingmagnetC 1 2SSNN N SNCNOMZwithout biasingmagnetNONSOPERATIONMPo-100Plastic coatedversionMZC-300MRo-100Standard versionNIVOPOINT magnetic float level switches work on the basis of the interaction of the built-in magnetin the float and the reed switches in the probe. The float of NIVOPOINT level switch devices movesalongside the probe tube tracking the level of the measured liquid and activating the reed switches.When the float moves ahead the reed switches, it changes the default state (NO or NC)of the reed switches, which stay in self-holding state with the help of opposite polarized magnetsnext to the reed switches. When the liquid level decreases, the float moves ahead the reed switchesagain, breaks off the self-holding state and restores the previous state of the reed switches.The mini type NIVOPOINT level switches do not contain biasing magnets. By trackingthe level, the magnetic float activates the reed switch in the probe. The reed switch opens or closesaccording to the position of the magnetic float. The default state is meant with bottom positioned float,the normally opened or closed state of the reed switch can be changed by the inversion of the float.69

LEVEL SWITCHESMAGNETIC TRACKING LEVEL SWITCHESNIVOPOINTTECHNICAL DATAType Standard Plastic coated Explosion-proof Mini typeInsertion length 0.25 m ... 3 m 0.1 m ... 0.5 mLEVEL SWITCHESMaterial of wetted parts1.4404 float /1.4571PVDF or PP float /PFA coated probe tube1.4404 float / 1.4571 1.4404 float / 1.4571Max. process pressure 2.5 MPa (25 bar) 0.5 MPa (5 bar) 2.5 MPa (25 bar)Min. medium density 0.8 kg/dm 3 0.4 / 0.7 kg/dm 3 0.8 kg/dm 3 0.8 kg/dm 3Float sizessee: float selection tableMedium temperature -40 °C...+150 °C -40 °C...+80 °C see: temperature data-40 °C ... +120 °CAmbient temperature -40 °C...+100 °C for Ex versions table-20 °C ... +70 °COutput1 ... 5 pcs reed-switches, one connecting point of each is common, NO/NC1…3 pcs reed-switches, NO or NCdepending on float orientationSwitching rate 120 W / VA, 250 V AC/DC, 3 A reed relay, summary max. 9 A 120 W/VA 250 V AC/DC max. 3 ASwitching pointsee: auxiliary table of order codes40 mm ± 3 mm from the bottomof the protection tubeSwitching differential < 10 mm –Distance between reed-switches minimum 110 mm –Electrical connectionProcess connectionM 20x1.5 cable gland,cable outer diameter: 6…12 mmterminal, 0.5 … 2.5 mm 2 wire cross sectionM 20x1.5 cable gland, cableouter diameter: 9.5… 10 mmas per order codeGasket Klingerit – Klingerit0.5 m long*, 2 x 0.75 mm 2 cablewith silicon insulation(outer diameter: 5 mm)Electrical protection Class I. Class II.Ingress protection IP 65 IP 68 (20 m)Certification – ATEX II 2 G EEx d IIC T3…T6 Bureau VeritasDimension of the housing 116 x 80 x 65 mm 124 x 80 x 65 mm –Mass 0.4 kg + 0.3 kg/m 0.45 kg + 0.3 kg/m 0.15 kg + cable: 0.05 kg/m* available to order with different cable lengthFLOAT SELECTIONType MRC-105-7M-600 MRC-105-7M-700 MRC-105-7M-800 MPP-105-3M-200 MPP-105-3M-900MZS-101-3M-700 (1)DimensionsStandard type(2)Plastic co. type(2)Ex type(2)Mini typeMedium-density(min.)0.8 kg/dm 3 0.55 kg/dm 3 0.4 kg/dm 3 0.7 kg/dm 3 0.4 kg/dm 3Material 1.4404 PVDF PPMedium pressure 2.5 MPa (25 bar) 1.6 MPa (16 bar) 2.5 MPa (25 bar) 0.6 MPa (6 bar) 0.3 MPa (3 bar)(1) Mini type (2) Standard float, can be ordered with different float as per the float selection table70

LEVEL SWITCHESMAGNETIC TRACKING LEVEL SWITCHESNIVOPOINT MRMagnetic float switch with up to 5 switch points. Output: NO or NCAll wetted parts are made of stainless steel (1.4571, 1.4404); paint coated Aluminium housing with IP65Float:Ø 53.5 mm (min. 0.8 g/cm 3 ), probe lengths: 0.5-3 mEx marking: ATEX x II 2 G EEx d IIC T6…T3NIVOPOINTTypeBase price in HRKMRX XXX X 1380,00Process connectionAdd on prices in HRKMR XXX XA 1" BSP 0,00C 2" BSP 148,00D 1" NPT 0,00G 2" NPT 148,00Number of switching pointsAdd on prices in HRKMRX XX X1 1 switch 0,002 2 switches 118,003 3 switches 235,004 4 switches 354,005 5 switches 471,00NIVOPOINT MRLEVEL SWITCHESProbe length (Ln)Add on prices in HRKMRX X X0 5 0.5 m 0,0006 3 0 0.6-3 m; each started 0.1 m 30,60ApprovalMRX XXXAdd on prices in HRK3 For non-hazardous area 0,007 EExd 608,00MR Only devices with 2” process connection can be installed without removing the float.Ball float Ø 95 mm (min. 0.55 g/cm³) or Ø 124 mm (min. 0.4 g/cm 3 ) available on request.This request should be given in the text of the order.Add on prices in HRK476,00NIVOPOINT MR EExdSpecification is required as below:Total probe length (Ln)=Switching points: distance from process connection in mmL1=L2=L3=L4=L5=NO or NC represents open or closed contacts when the float is at the bottom i.e. empty tankSwitch type(NO / NC)71

LEVEL SWITCHESLEVEL SWITCHESMAGNETIC TRACKING LEVEL SWITCHESNIVOPOINT MP, plastic version maximum pressure 5 bar !!Magnetic float switch with up to 5 switching pointsAluminium housing, IP65, Paint coated, Float: Ø 76x87 mmMaterials of the wetted parts:FlangePPProbePFA coated st. st.FloatPVDF or PPOutput: NO or NCTypeBase price in HRKMP X XXX X 2340,00Process connectionAdd on prices in HRKMP XXX XP DIN DN 80, PN16 234,00R DIN DN 100, PN16 271,00Number of switching pointsAdd on prices in HRKMP X XX X1 1 switch 0,002 2 switches 118,003 3 switches 235,004 4 switches 354,005 5 switches 471,00Probe lengthAdd on prices in HRKMP X X X0 5 0.5 m 0,0006 3 0 0.6-3 m; each started 0.1 m 48,50NIVOPOINT MPPNIVOPOINTFloat / MaterialMP X XXXAdd on prices in HRK3 Ø 76x87 / PVDF or PP 0,00MP Specification is required as below:Total probe length (Ln)=Switching points: distance from process connection in mmL1=L2=L3=L4=L5=NO or NC represents open or closed contacts when the float is at the bottom i.e. empty tankSwitch type(NO / NC)72

LEVEL SWITCHESMAGNETIC TRACKING LEVEL SWITCHESNIVOPOINT MZCMagnetic float switch with up to 3 switch pointsMaterials of the wetted parts: stainless steel (1.4571, 1.4404)Cable length: 0.5 mFloat: Ø 53.5 mm (min. 0.8 g/cm 3 )Insertion length: 0.1-0.5 m, process connection: 2" BSPMarine approval: Bureau VeritasNIVOPOINTTypeBase price in HRKM Z C X 0 X 3 1020,00Number of switching points / Number of floatsAdd on prices in HRKM Z C 0X 31 1 switch / 1 float 0,002 2 switches / 2 floats 298,003 3 switches / 3 floats 595,00Probe lengthAdd on prices in HRKM Z C X 0 31- 5 0.1-0.5 m; each started 0.1 m 37,40NIVOPOINT MZCLEVEL SWITCHESM Z C 0 31NIVOPOINT MZSMagnetic float switch with 1 switch point, cable length: 0.5 mMaterials of the wetted parts: stainless steel 1.4571Float: Ø 53.5 mm (min. 0.8 g/cm 3 )Process connection: 1/4" BSPMarine approval: Bureau VeritasTypeBase price in HRKM Z S 1 0 X 3 734,00Probe lengthAdd on prices in HRKM Z S 1 0 31 0.1 m 0,002 0.2 m 37,40M ZS 10 3NIVOPOINT MZSCablePrice in HRKEach started 1 m over the standard 0.5 m 19,60NIV24MZS-101-373

LEVEL SWITCHESVIBRATING ROD LEVEL SWITCHESNIVOCONT RGENERAL DESCRIPTIONLEVEL SWITCHESThe NIVOCONT R series of vibrating rod level switches are robust instruments designed for low andhigh level indication of granules and powders with a minimum of 0.05 kg/dm 3 density. Mounted ontanks, silos or hopper bins it can control filling / emptying, or give fail-safe alarm signals. The highlypolished version is recommended to use for abrasive mediums. The operation principle is based onthat the electronic circuit excites a vibration in the rod probe. When the medium reaches and coversthe rod, its vibration stops, when the medium leaves the rod it returns to vibrate freely. The electronicssenses the change of vibration and gives output signal after a selected delay.MAIN FEATURESExtension up to 20 mAdjustable sensitivityMax. medium temperature: 160°CUniversal supply voltageDust explosion protectionFine polished probeIP 67 protectionTYPE SELECTIONPosition of the switching point (high, low) and the mounting (side, bottom, top)determines the selection of the appropriate type.VersionHigh limit switchLow limit switchStandardSide mountedSide or bottom mountedPipeextendedTop mountedCableextendedTop mountedAPPLICATIONSPowders, pellets, granulatesGrainsGround productsStone-powder, chippingsCement, sandCoal, slagCERTIFICATIONSLoadabilityForceForceTorqueTorqueMax. Force 500 N – 45 kNload Torque 100 Nm 100 Nm –ATEX II 1/2 D tD A20/A21 IP67 T* °CIEC Ex t IIIC T* Da/Db IP67RKH-500/600 RKR-500/600 RKK-500/60074

LEVEL SWITCHESVIBRATING ROD LEVEL SWITCHESNIVOCONT RTECHNICAL DATAVersion Standard Pipe extended Cable extendedInsertion length 207 mm 0.3 … 3 m 1 … 20 mMaterial of wetted parts 1.4571Process connection1 1/2 " BSP; 1 1/2 " NPT as per order codevibrating part: 1.4571cable: PE coverOutputsee output dataTemperature rangestandard: -30 °C…+110 °C; High temp. version: -30 °C…+160 °C; Ex version: see temperature dataMedium pressure max. 2.5 MPa (25 bar) max. 0.6 MPa (6 bar)Force 500 N – 45 kNMax. loadTorque 100 Nm 100 Nm –LEVEL SWITCHESMedium density*Response time (selectable)Power supplyPower consumptionmin. 0.05 kg/dm 3 (granular size 10 mm)< 2 sec or 5 sec ±1.5 sec20…255 V AC/DC, Ex: 20…250 V AC, 20…50 V DC 2.5 VA / 2 WHousing materialElectrical connectionPaint coated aluminium or plastic PBT2 x M20x1.5 plastic cable glands for Ø 6…12 mm cableFor Ex version: 2 x M20x1.5 cable glands: protection Ex tD (ATEX) for Ø 9…13 mm cable2 x M20x1.5 cable glands: protection Ex IIIC IP67 (IEC Ex) for Ø 6…12 mm cable2 pcs. terminal blocks for max. 1.5 mm 2 wire cross sectionElectrical protection Class I.Ingress protectionEx marking **ATEXIEC ExIP67II 1/2 D tD A20/A21 IP67 T* °C (see temperature limit values for Ex versions)Ex t IIIC T* Da/Db IP67 (see temperature limit values for Ex versions)MassMetal housing 1.88 kg 1.88 kg +1.4 kg/m 1.88 kg +0.6 kg/mPlastic housing 1.5 kg 1.5 kg +1.4 kg/m 1.5 kg +0.6 kg/m* Depends on the internal friction and the granular size of the medium ** Only with metal housingOUTPUT DATAOutput Relay ElectronicOutput type and rating SPDT 250 V AC, 8 A, AC1 SPST 50 V, 350 mAOutput protection – Overvoltage, overcurrent and overloadVoltage drop (switched on) – < 2.7 V 350 mAResidual current (switched off) – < 10 μATEMPERATURE DATATemperature limit values for Ex versions:TemperaturedataCableextendedStandard andpipe extendedHightemp.Medium temp. (T M )Min.: –30°CAmbient temp. (T A )Min.: –30°CMax. surface temp.of process connection+60°C +70°C +95°C +60°C +70°C +95°C +110°C +160°C+60°C +50°C +60°C +60°C +50°C +60°C +50°C +35°C+85°C +85°C +95°C +85°C +85°C +95°C +95°C +135°CMax. surface temp. +85°C +85°C +95°C +85°C +85°C +95°C +110°C +160°CTemperature diagramTemp. classes T90°C T100°C T90°C T100°C T115°C T170°C75

LEVEL SWITCHESVIBRATING ROD LEVEL SWITCHESNIVOCONT R, standard probeVibrating rod level switch for powders and granular solidsStainless steel probe. Probe length: 207 mmPower supply: 20-255 V AC/DC; Ex version: 20-250 V AC / 20-50 V DCSelectable response time: standard response: 5 1.5 sec, fast response < 2 secSelectable standard and high energy vibration modeHousing aluminium or plastic with IP67 / NEMA 6Ex marking: ATEX x II 1/2D tD A20/A21 IP67 T*IEC Ex t IIIC T* Da/Db IP67**NIVOCONT RLEVEL SWITCHESTypeBase price in HRKR XX X 0 2 X 2 300,00VersionsAdd on price in HRKR X X 0 2 XK Standard version (110°C) 0,00H High temperature version (160°C) 295,00NIVOCONT RKH-502-_Process connectionAdd on price in HRKR X X 0 2 XH 1 1/2" BSP 0,00N 1 1/2" NPT 0,00HousingAdd on price in HRKR XX 0 2 X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced (not available in Ex version) 0,00Output / ApprovalAdd on price in HRKR XX X 0 2 1 SPDT, potential free relay; 8 A 250 V AC 0,003 Solid state output 0,005 Dust Ex, SPDT, potential free relay; 8 A 250 V AC 493,00R 02** Need of IEC is to be specified with orderNIV24NIVOCONT RKH-502-176

LEVEL SWITCHESVIBRATING ROD LEVEL SWITCHESNIVOCONT R, pipe extended probeVibrating rod level switch with pipe extended probe for powders and granular solidsStainless steel probe with length up to 3 mPower supply: 20-255 V AC/DC; Ex version: 20-250 V AC / 20-50 V DCSelectable response time: standard response: 5 1.5 sec, fast response < 2 secSelectable standard and high energy vibration modeHousing aluminium or plastic with IP67 / NEMA 6Ex marking: ATEX x II 1/2D tD A20/A21 IP67 T*NIVOCONT RTypeBase price in HRKR XX XXX X 3090,00VersionsAdd on price in HRKR X XXX XK Standard version (110°C) 0,00H High temperature version (160°C) 295,00Process connectionAdd on price in HRKR X XXX XR 1 1/2" BSP 0,00L 1 1/2" NPT 0,00HousingAdd on price in HRKR XX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced (not available in Ex version) 0,00NIVOCONT RKRLEVEL SWITCHESProbe lengthAdd on price in HRKR XX X X03 0 5 0.3-0.5 m 0,0006 3 0 0.6-3 m; each started 0.1 m 90,10Output / ApprovalAdd on price in HRKR XX XXX1 SPDT, potential free relay; 250 V AC, 8 A 0,003 Solid state output 0,005 Dust Ex, SPDT, potential free relay; 250 V AC, 8 A 493,00R Available on request Remote mounting electronics Version with sliding sleeve77

LEVEL SWITCHESVIBRATING ROD LEVEL SWITCHESNIVOCONT R, cable extended probeVibrating rod level switch with cable extended probe for powders and granular solidsStainless steel probe, PE coated steel cable, Probe length up to 20 mPower supply: 20-255 V AC/DC; Ex version: 20-250 V AC / 20-50 V DCSelectable response time: standard response: 5 1.5 sec, fast response < 2 secSelectable standard and high energy vibration modeHousing aluminium or plastic with IP67 / NEMA 6Ex marking: ATEX x II 1/2D tD A20/A21 IP67 T*NIVOCONT RLEVEL SWITCHESTypeBase price in HRKR KX XXX X 3430,00Process connectionAdd on price in HRKR K XXX XK 1 1/2" BSP 0,00C 1 1/2" NPT 0,00HousingAdd on price in HRKR KX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced (not available in Ex version) 0,00Probe lengthAdd on price in HRKR KX X X0 1 1 m 0,0002 2 0 2-20 m; each started 1 m 59,50NIVOCONT RKKOutput / ApprovalAdd on price in HRKR KX XXX1 SPDT, potential free relay; 8 A 250 V AC 0,003 Solid state output 0,005 Dust Ex, SPDT, potential free relay; 8 A 250 V AC 493,00R K Order examples for non-standard probe lengths:1). 470 mm probe: RK-505-_ / 470 mmPrice: price of next standard length (RK-505-_)2). 1520 mm probe: RK-516-_ / 1520 mmPrice: price of next standard length (RK-516-_)78

LEVEL SWITCHESVIBRATING ROD LEVEL SWITCHESNIVOCONT R, custom extended probeVibrating rod level switch with custom extended probe for powders and granular solidsExtension pipe: max. 2 mParts protruding into tank: stainless steel with probePower supply: 20-255 V AC/DCSelectable response time: standard response: 5 1.5 sec, fast response < 2 secSelectable standard and high energy vibration modeEnclosure of electronics: IP67 / NEMA 6NIVOCONT RTypeBase price in HRKR XX X 0 2 X 3680,00VersionsAdd on price in HRKR X X 0 2 XK Standard version (110°C) 0,00H High temperature version (160°C) with high energy electronics 295,00Process connectionAdd on price in HRKR X X 0 2 XE 1 1/2" BSP 0,00F 1 1/2" NPT 0,00NIVOCONT RKELEVEL SWITCHESHousingAdd on price in HRKR XX 0 2 X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced 0,00OutputAdd on price in HRKR XX X 0 2 1 SPDT, potential free relay; 8 A 250 V AC 0,003 SPST, Solid state output 0,00R 02NIVOCONT R, with remote-mounted electronicsSpecial version with electronics separated from probeUse the order code extension below after the standard order code of the device:Special versionsAdd on price in HRKX09 746,00Cable extensionAdd on price in HRKMax. 10 m; each started 1 m50,20Order example:Remote-mounted version with standard probe and 3 m extension: RKH-502-1-X09/3mNIVOCONT RKH-500-X09NIVOCONT RKH-500-X0979

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCHLEVEL SWITCHESGENERAL DESCRIPTIONNIVOSWITCH vibrating fork level switches are suitable for level detection of liquids or granular, powdered solids. Units with parallel vibrating fork are suitable for liquids, units withnon parallel vibrating fork are suitable for solids. Mounted on pipes, silos, tanks or hopper bins it can control filling / emptying, also can generate fail-safe alarms providing overfillordry run protection. The operation principle is based on that the electronic circuit excites a vibration in the fork probe. When the medium reaches and covers the fork, its vibrationchanges or stops. The fork will start vibrating again as the medium sets it free. The electronics senses the change of vibration and gives output signal after a selected delay.The plastic coated version is recommended to use for aggressive mediums, the highly polished version is recommended to use for abrasive mediums. The PNP/NPN transistor outputversions can be connected directly to PLC, or relay unit. NIVOSWITCH vibrating forks are able to solve switching tasks of high-current loads with the help of UNICONT PKK switchingamplifiers. UNICONT PKK-312-8 Ex is a recommended intrinsically safe switching unit designed for Ex rated vibrating forks.MAIN FEATURESCompact and mini compact typeRod extension up to 3 metersPlastic PFA coated versionPolished vibrating partHygienic versions with various process connections and 0.5 micron fine polishingSelectable sensitivityRelay or electronic outputSwitching performance does not depend on thechange of liquid conductivity, dielectric constant,viscosity, pressure and temperatureMedium temperature max. 130°COutput test with optional test magnetEx versionIP 67, 65/68 protectionAPPLICATIONSFor liquids: min. 0.7 kg/dm 3 density andmax. 10 4 mm 2 /s viscosity, for solids:min. 0.01 kg/dm 3 densityLevel switch of liquids, powders, granulesFood & beverages industry, animal feed,chemical industry, oil industryFor normal or hazardous, agressive(acids, solvents) liquidsFor free-flowing, powdered solids, granulesCovers a large variety of level detection,applications such as high/low fail safe limit switch,overfill or dry run protection, pump controlsCERTIFICATIONSATEX II 1G Ex ia IIC T4…T6 G4ATEX II 1G Ex ia IIB T4…T6 G4ATEX II 1/2 D IP6x T160°CGermanischer Lloyd (only for RF-400compact types for liquids)TYPE SELECTIONType selection is aided by this table for choosing the proper version to a given level switchingtask. Most essential aspect is the consistency (liquid or solid) of the measurement medium.Application Liquids SolidsFeaturesMinicompactMinicompactCompactSteel housingPlastic housingExtensionHighly polished versionPlastic coated fork1” process connection1 ½” process connectionRelay outputElectronic outputterminalElectronicconnectionconnectorcableIntrinsical safe versionDust Ex versionFunction setting (low-high level) * *Function indicationDensity selectionOutput test magnet* only for 3-wire DC versionsCompactRPS-1011test magnetPKK-312-8 ExEx ia power supply forEx ia type vibrating forksRAM-403RRH-310RFM-400RCM-400cable versionRCM-400RRH-300RLH-30080

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCHTECHNICAL DATATypeMini compactCompactFor liquids For solids For liquids For solidsInsertion length 69-3000 mm 137-3000 mm 69-3000 mm 137-3000 mmMaterialof wetted partsProcess connectionMedium temperatureDIN 1.4571PFA coatingDIN 1.4571DIN 1.4571PFA coatingAs per order code– 40°C … +130°C (see: temperature diagrams)DIN 1.4571Ambient temperature – 40°C … +70°C (see: temperature diagrams) – 30°C … +70°C – 40°C … +70°CMedium pressuremax. 4 MPa (40bar) (see: pressure diagrams)Medium density > 0.7 kg/dm³ 0.01 kg/dm³ > 0.7 kg/dm³ 0.01 kg/dm³Medium viscosity 10000 mm²/s (cSt) – 10000 mm²/s (cSt) –Power supply2-wire DC: 15-29 V DC2- wire DC: 15-27 V DC2- wire AC: 20-255 V AC; 3- wire DC: 12-55 V DC20-255V AC, 20-60V DCPower consumption AC: depending on load; DC: < 0,6 W AC:1.2-17 VA; DC: < 3 WHousing material DIN 1.4571 Paint coated aluminium or plastic PBTElctrical connectionConnector, or 3m integrated cable (1.)2x0.5 mm 2 / 4x0.75 mm 2 /5x0.5 mm 2 2xM20x1.5 cable gland, for 6-12mm cable,terminal, for 0.5 – 1.5mm² wire cross sectionElectrical protection AC version: Class I.; DC version: Class III. Class I.Mechanical l protection Connector: IP65; cable: IP68 IP67Mass 0.5 kg+1.2 kg/m extension 1.3 kg + 1.2 kg/m extensionLEVEL SWITCHES1.) available cable length: max. 30mSPECIAL DATA FOR EX CERTIFIED MODELSTypeMini compact vibrating forks for liquids(2-wire DC version)Stainless steel vibrating partCoated vibrating partEx marking ATEX II 1 G Ex ia IIC T4…T6 Ga ATEX II 1 G Ex ia IIB T4…T6 GaPower supply and signal circuit limits (2.)Ui=29 V, Li=100 mA, Pi=1.4W, Ci=7 nF, Li=0 mHMini compact and compactvibrating forks for solidsConnector version (IP 65) (3.) Cable version (IP 68) (3.) Compact type (IP 67) (4.)Ex marking ATEX II 1/2 D Ex IP 6x T160°C2.) Intrinsically safe vibrating forks should be powered by Ex ia certified and approved devices 3.) only for 2-wire AC, or 3-wire DC version 4.) only with aluminium housingTEMPERATURE DATAMedium pressure - Medium temperature(P T ) Medium pressure(T M ) Medium temperatureMini compact Ex types for liquidsTemperature classes T6 T4 T3T A +70°C +60°C +60°C +60°CT M +70°C +75°C +95°C +130°CMini - Compact versionMedium pressure - Medium temperature PP flange version(P T ) Medium pressure(T M ) Medium temperatureTemperature limits:(T A ) Ambient temperature(T M ) Medium temperature(I L ) Load current ofDC versions81

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESOUTPUT DATANIVOSWITCHRESPONSE TIME DIAGRAMCompact typeOutput For liquids For solidsLEVEL SWITCHESRelay1 or 2 (SPDT) relays250VAC, 8A, AC1/250 V AC, 6A, AC1Response when immersed 0.5 sectime when free 1sec* 1 sec – H density 3 sec – L densityMini compact typeType Output For liquids For solidsWhen immersed: 14 mA ± 1 mA2-wire DC DC current changeWhen free: 9 mA ± 1 mAVoltage drop (in switched-on state): < 10.5 VAC output for serial connectionResidual current (in switched-off state): < 6mA2-wire ACCurrent loadTransistor switchmax. continuous 350 mA, AC 13 350 mA, AC 13 (Ex version: 140 mA)min. continuous10 mA / 255V; 25 mA / 24Vmax. impulse1.5 A / 40 msecConnector: Field selectable NPN- and PNPCable: galvanically isolated PNP/NPN3-wire DCVoltage drop (in switched-on state) < 4.5 V < 1.8 VCurrent load (max. continuous) 350 mA / Umax=55V 350 mA / Umax=55V (Ex version: 200 mA)Residual current (in switched-off state) < 100 μA < 10 μAResponse when immersed0.5 sectimewhen free < 1sec* 1 sec – H density < 3 sec – L densityOPERATION* see viscosity diagramCompact and Mini compact typePower supplySwitchingFail-Safeswitch *Status LEDRelayOutputElectronicHigh levelONLow levelOFF – –Highor LowPowersupplyONOFF2-wire DC versionSwitching Status LED Output14 ±1 mA9 ±1 mAFork immersed,or fork is free–OPERATION MODE SWITCHESCompactFail-SafeFail-safe alarmis indicated withde-energised relayor open state ofthe outputCompactDensityMedium density 0.5 kg/dm³Medium density< 0.5 kg/dm³* Mini compact type: With appropriate wiring or with Fail-Safe switch on the connectorCompact type: with Fail-Safe switch82

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCH RFVibrating fork level switch for liquidsMaterials: Stainless steel probePower supply: 20-255 V AC and 20-60 V DC; universalEnclosure of electronics: IP67 / NEMA 6TypeBase price in HRKR XX X 0 0 X Short probe, Probe length: 69 mm 1840,00R XX X 0 1 X Standard probe, Probe length: 125 mm 1880,00R XX XXX X Extended probe, Probe length: 0.2-3 m 2670,00Fork finishingAdd on prices in HRKR X XXX XF Polished 0,00D PFA coated stainless steel fork 1150,00J Highly polished stainless steel 536,00Process connectionAdd on prices in HRKR X XXX XM 1" BSP 0,00P 1" NPT 0,00T 1 1/2" Triclamp (ISO2852) 354,00R 2" Triclamp (ISO2852) 383,00D DN 40 Pipe coupling (DIN 11851) 757,00E DN 50 Pipe coupling (DIN 11851) 835,00Stainless steel flanges; not welded unless specifically ordered soFlanges conform to: DIN 2501, DIN 2526, form C / ANSI B 16.5G DIN DN 50 PN 40 / 25 1440,00B ANSI 2" RF 600 / 300 psi 1440,00K JIS 40K 50A 1440,00PFA coated stainless steel flange; not welded unless notedFlanges conform to: DIN 2501, DIN 2526, form C / ANSI B 16.5G DIN DN 50 PN 40/25 2720,00B ANSI 2" RF 600/300 psi 2720,00K JIS 40K 50A 2720,00PP flanges (max. 6 bar; from -20°C to +90°C)F DIN DN 50 PN 16 412,00A ANSI 2" RF 150 psi 412,00J JIS 10K 50A 412,00HousingAdd on prices in HRKR XX XX X4 Aluminium housing (paint coated) 140,005 Plastic housing (PBT, glass fibre reinforced) 0,00Probe lengthAdd on prices in HRKR XX X X0 0 0.069 m 0,000 1 0.125 m 0,00For standard polished forks (RF)0 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 89,30For highly polished forks (RJ)0 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 122,00For PFA coated stainless steel forks (RD)0 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 186,00OutputAdd on prices in HRKR XX XXX0 1 SPDT relay: 250 V AC, 8 A 0,00A 2 SPDT relay (1 x 250 V AC, 8 A and 1 x 250 V AC, 6 A) 148,00NIVOSWITCHNIVOSWITCH RFM-_00-_NIVOSWITCH RFP-_00-_NIVOSWITCH RFM-_01-_NIVOSWITCH RFP-_01-_NIVOSWITCH RFM-_02-_ … RFM-_30-_NIVOSWITCH RFP-_02-_ … RFP-_30-_LEVEL SWITCHESR Non-standard probe lengths available on request83

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCH RCCompact vibrating fork level switch for liquids onlyAll wetted parts and housing stainless steel; IP65/IP68DIN connector (IP65) or 3 m integrated cable (IP68)Ex marking: ATEX x II1G Exia IIB T6-T4 GaATEX x II1G Exia IIC T6-T4 GaTypeBase price in HRKR XX 4 0 0 X “SHORTY” probe, Probe length: 69 mm 1 050,00R XX 4 0 1 X Standard probe, Probe length: 125 mm 1 160,00R XX 4XX X Extended probe, Probe length: 0.2-3 m 1 790,00NIVOSWITCHRCM-400-1/3/6/8LEVEL SWITCHESFork finishingAdd on prices in HRKR X 4XX XC Polished stainless steel 0,00G Highly polished stainless steel 541,00A PFA coated stainless steel fork (only 1" BSP or flange1 150,00process connection)E Without function test reed -42,50Process connectionAdd on prices in HRKR X 4XX XM 1" BSP 0,00P 1" NPT 0,00T 1 1/2" Triclamp (ISO2852) 354,00R 2" Triclamp (ISO2852) 383,00D DN 40 Pipe coupling (DIN 11851) 757,00E DN 50 Pipe coupling (DIN 11851) 835,00Stainless steel flanges; not welded unless specifically ordered soFlanges conform to: DIN 2501, DIN 2526, Form C / ANSI B 16.5G DIN DN 50 PN 40 / 25 1 440,00B ANSI 2" RF 600 / 300 psi 1 440,00K JIS 40K 50A 1 440,00PFA coated stainless steel flange; not weldedFlanges conform to: DIN 2501, DIN 2526, Form C / ANSI B 16.5G DIN DN 50 PN 40/25 2 720,00B ANSI 2" RF 600/300 psi 2 720,00K JIS 40K 50A 2 720,00PP flanges (max. 6 bar; -20°C to +90°C), drilled like DIN PN16 / ANSI 150 psiF DIN DN 50 PN 16 412,00A ANSI 2" RF 150 psi 412,00J JIS 10K 50A 412,00Probe lengthAdd on prices in HRKR XX 4 X0 0 0.069 m 0,000 1 0.125 m 0,00For standard polished forks (RC)0 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 89,30For highly polished forks (RG)0 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 122,00For PFA coated stainless steel forks (RA)0 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 186,00RCT-400-2/4/7/9RCR-400-2/4/7/9RCG-400-2/4/7/9RCM/P-401-1/3/6/8RCM/P-430-1/3/6/8RCD-400-2Output / ApprovalAdd on prices in HRKR XX 4XX1 2-wire AC / DIN connector 0,002 2-wire AC / cable 157,003 3-wire PNP-NPN / DIN connector 0,004 3-wire PNP-NPN / cable 157,006 2-wire DC / DIN connector 0,007 2-wire DC / cable 157,008 2-wire Ex / DIN connector 1 260,009 2-wire Ex / cable 1 410,00K 2-wire DC / M12 connector 323,00L 2-wire Ex / M12 connector 1 580,00M 3-wire PNP-NPN / M12 connector 323,00RCT-401-2/4RCR-401-_RCG-401-2/4/7/9RCF-401-2/4/7/9Type RCD RCENominal size DN 40 DN 50A RD 65x1/6 RD 78x1/6R 4 NIV24Cable Add on prices in HRK NIVOSWITCH RCM-400-3Maximum length 30 m; each started 1 m over the standard 3 m 19,60 NIVOSWITCH RCM-401-384

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCH RFVibrating fork level switch for light free flowing solidsMaterials: Stainless steel probe, paint coated Aluminium housing, IP67 / NEMA 6Power supply: 20-255 V AC and 20-60 V DC; universalOutput: 1 or 2 SPDT, potential free relay, 8A 250 V ACEx marking: ATEX x II 1/2 D IP 6X T160°NIVOSWITCHTypeBase price in HRKR F X X 0 1 X Standard probe, Probe length: 125 mm 2070,00R F X XXX 0 Extended probe, Probe length: 0.2-3 m 2850,00Process connectionAdd on prices in HRKR F XXX XM 1" BSP 0,00P 1" NPT 0,00Stainless steel flanges; not welded unless specifically ordered soFlanges according to DIN 2501, finishing: DIN 2526, Form C / ANSI B 16.5G DIN DN 50 PN 40/25 1440,00B ANSI 2" RF 600/300 psi 1440,00K JIS 40K 50A 1440,00PP flanges (max. 6 bar; -20°C to +90°C), drilled as DIN PN16 / ANSI 150 psiF DIN DN 50 PN 16 412,00A ANSI 2" RF 150 psi 412,00J JIS 10K 50A 412,00HousingAdd on prices in HRKR F X XX X2 Plastic housing (PBT, glass fibre reinforced) 0,003 Aluminium housing (paint coated) 140,00Probe lengthAdd on prices in HRKR F X X X0 1 0.125 m 0,000 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 89,30Output / ApprovalAdd on prices in HRKR F X XXX0 1 SPDT relay: 250 V AC, 8 A 0,00A 2 SPDT relays (1 x 250 V AC, 8 A and 1 x 250 V AC, 6 A) 148,00B 1 SPDT relay: 250V AC, 8 A / Dust Ex 493,00NIVOSWITCH RFM-301-_NIVOSWITCH RFP-3_ _-_NIVOSWITCH RFM-3_ _-_NIVOSWITCH RFP-3_ _-_LEVEL SWITCHESR F 85

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCH RCCompact vibrating fork level switch for light, free-flowing solidsAll wetted parts and housing are made of stainless steel IP65/IP68DIN connector (IP65) or 3 m integrated cable (IP68)Ex marking: ATEX x II 1/2 D IP 6X T160°NIVOSWITCHTypeBase price in HRKRCX 3 0 1 X Standard probe, Probe length: 125 mm 1 490,00RCX 3XX X Extended probe, Probe length: 0.2-3 m 2 220,00LEVEL SWITCHESProcess connectionAdd on prices in HRKRC 3XX XM 1" BSP 0,00P 1" NPT 0,00Stainless steel flanges; not welded unless specifically ordered soFlanges conform to: DIN 2501, finishing: DIN 2526, Form C / ANSI B 16.5G DIN DN 50 PN 40/25 1 440,00B ANSI 2" RF 600 / 300 psi 1 440,00K JIS 40K 50A 1 440,00PP flanges (max.: 6 bar; -20°C to +90°C), drilled like DIN PN16 / ANSI 150 psiF DIN DN 50 PN 16 412,00A ANSI 2" RF 150 psi 412,00J JIS 10K 50A 412,00R_M-301-1/3/6R_P-301-1/3/6Probe lengthAdd on prices in HRKRCX 3 X0 1 0.125 m 0,000 2 0.2 m 0,000 3 3 0 0.3-3 m; each started 0.1 m 89,30Output / ApprovalAdd on prices in HRKRCX 3XX1 2-wire AC / connector 0,002 2-wire AC / cable 157,003 3-wire PNP-NPN / connector 0,004 3-wire PNP-NPN / cable 157,006 2-wire DC / connector 0,007 2-wire DC / cable 157,00C 2-wire AC / DIN connector / Dust Ex 425,00D 2-wire AC / integrated cable / Dust Ex 490,00E 3-wire PNP-NPN / DIN connector / Dust Ex 425,00F 3-wire PNP-NPN / integrated cable / Dust Ex 490,00RC 3R_M-301-2/4/7R_P-301-2/4/7R_M-3_ _-1/3/6R_P-3_ _-1/3/6CableAdd on prices in HRKMaximum length 30 m; each started 1 m over the standard 3 m 19,6086

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCHNIVOSWITCH RRVibrating level switch for powder and granules with welded forkPlastic or aluminium housing with IP67 / NEMA 6Power supply: 20-255 V AC, 20-60 V DCOutput: 1 or 2 SPDT, relay 8 A 250 V ACEx marking: ATEX x II 1/2 D IP 6X T160°TypeBase price in HRKRRX X 0 1 X Standard probe, Probe length: 137 mm 2130,00RRX X 0 2 X Standard probe, Probe length: 175 mm 2210,00RRX XXX X Extended probe, Probe length: 0.3-3 m 2960,00Process connectionAdd on prices in HRKRR XXX XH 1 1/2" BSP 0,00N 1 1/2" NPT 0,00Stainless steel flanges; not welded unless specifically ordered soFlanges according to DIN 2501, finishing: DIN 2526, Form C / ANSI B 16,5G DIN DN 50 PN 40/25 1440,00B ANSI 2" RF 600 / 300 psi 1440,00K JIS 40K 50A 1440,00PP flanges (maximum 6 bar; -20°C to +90°C), DIN PN16 / ANSI 150 psiF DIN DN 50 PN 16 412,00A ANSI 2" RF 150 psi 412,00J JIS 10K 50A 412,00NIVOSWITCH RRH-_02-_LEVEL SWITCHESHousingAdd on prices in HRKRRX XX X2 Plastic housing (PBT, glass fibre reinforced) 0,003 Aluminium housing (paint coated) 140,00Probe lengthAdd on prices in HRKRRX X X0 1 0.137 m 0,000 2 0.175 m 0,000 3 0.300 m 0,000 4 3 0 0.4-3 m; each started 0.1 m 74,80Output / ApprovalAdd on prices in HRKRRX XXX0 1 SPDT relay: 250V AC, 8 A 0,00A 2 SPDT relays (1 x 250 V AC, 8 A and 1 x 250 V AC, 6 A) 112,00B 1 SPDT relay: 250V AC, 8 A / Dust Ex 493,00NIVOSWITCH RRH-_03-_30RR 87

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESNIVOSWITCH RLVibrating level switch for powder and granules with welded forkAll wetted parts and housing are made of stainless steel IP65/IP68DIN connector (IP65) or 3 m integrated cable (IP68)Ex marking: ATEX x II 1/2 D IP 6X T160°NIVOSWITCHTypeBase price in HRKR L X 3 0 1 X Standard probe, Probe length: 137 mm 1 490,00R L X X 0 2 X Standard probe, Probe length: 175 mm 1570,00R L X 3XX X Extended probe, Probe length: 0.3-3 m 2 240,00LEVEL SWITCHESProcess connectionAdd on prices in HRKR L 3XX XH 1 1 / 2" BSP 0,00N 1 1 / 2" NPT 0,00Stainless steel flanges; not welded unless specifically ordered soFlanges according to DIN 2501 finishing DIN 2526, Form C / ANSI B 16.5G DIN DN 50 PN 40 / 25 1 440,00B ANSI 2" RF 600 / 300 psi 1 440,00K JIS 40K 50A 1 440,00PP flanges (max. 6 bar; -20°C to +90°C), DIN PN16 / ANSI 150 psiF DIN DN 50 PN 16 412,00A ANSI 2" RF 150 psi 412,00J JIS 10K 50A 412,00NIVOSWITCH RLH-302-_Probe lengthAdd on prices in HRKR L X 3 X0 1 0.137m 0,000 2 0.175 0,000 3 0.300 0,000 4 3 0 0.4-3 m; each started 0.1 m 74,80Output / ApprovalAdd on prices in HRKR L X 3XX1 2-wire AC / DIN connector 0,002 2-wire AC / integrated cable 150,003 3-wire PNP-NPN / DIN connector 0,004 3-wire PNP-NPN / integrated cable 150,006 2 wire DC / DIN connector 0,007 2 wire DC / integrated cable 150,00C 2-wire AC / DIN connector / Dust Ex 425,00D 2-wire AC / integrated cable / Dust Ex 490,00E 3-wire PNP-NPN / DIN connector / Dust Ex 425,00F 3-wire PNP-NPN / integrated cable / Dust Ex 490,00NIVOSWITCH RLH-330-1R L 3CableAdd on prices in HRKMaximum length 30 m; each started 1 m over the standard 3 m 19,6088

LEVEL SWITCHESVIBRATING FORK LEVEL SWITCHESUNICONT PKK-312-8, Remote Switching unitIntrinsically safe remote switching unit dedicated to the Ex “ia” version of the NIVOSWITCH R-400series vibrating forksMounting: DIN-rail EN 50022-35Output: SPDT, potential free relay, 250 V AC, 8A, AC1Power supply: 24 V AC/DCEx marking: ATEX x II (1) G [EEx ia] IICACCESSORIESTypeBase price in HRKPKK 3 1 2 8 Ex 1 360,00UNICONT PK-300Programmable current controlled remote switching unit featuring 1-22 mA input current andpowering capabilities for transmittersOutput: SPDT, potential free relay, 250 V, 8 A , AC1Power supply: 230 V AC, 110 V AC, 24 V AC or 24 V AC/DC (according to the order code below)Ex marking: ATEX x II (1) G [EEx ia] IICUNICONT PKK-312LEVEL SWITCHESTypeBase price in HRKPKK 3 1 2 1 230 V AC 757,00PKK 3 1 2 2 110 V AC 757,00PKK 3 1 2 3 24 V AC 757,00PKK 3 1 2 4 24 V AC/DC 1 160,00PKK 3 1 2 7 24 V AC/DC / Ex 1 280,00NIVOSWITCH RP, sliding sleeveSliding sleeve for NIVOSWITCH R-300 and R-400 series vibrating forks andNIVOROTA E-700 series rotary paddleOnly for extended versions without coating and with a minimum length of 300 mmMax. pressure: 6 barMaterial: stainless steelTypeBase price in HRKRPH 1 1 2 1 1/2" BSP 570,00RPN 1 1 2 1 1/2" NPT 570,00NIVOSWITCH RCM-400 + RPH-112NIVOSWITCH RPH-112NIVOSWITCH RPG, weld-in socketStainless steel weld-in socket for flush mounting NIVOSWITCH R..M-400 type vibrating forksTypeBase price in HRKRPG 1 0 1 224,00NIVOSWITCH RPG-101NIVOSWITCH RPS, screwdriver with test magnetMagnetic screwdriver for operation test of NIVOSWITCH Compact vibration forkTypeBase price in HRKRPS 1 0 1 92,7089

LEVEL SWITCHESROTARY PADDLE LEVEL SWITCHESNIVOROTAGENERAL DESCRIPTIONThe new NIVOROTA rotary paddle level switch series of well-known NIVELCO design can be used for detecting the level of lumpy or powdery materials and granules. Mounted totanks, silos and hoppers it can monitor and control level, filling and emptying of stored materials such as stone, fly ash, sand, coal, feed, beet slice, etc. A small power electric motordrives the paddle which rotates freely in the absence of the material. When the paddle is immersed by the material reaching it, the motor will be switched off the same time triggeringthe output contact switch. When the material level drops the paddle runs free again, the motor is reactivated and the switch returns to its original state. The new series NIVOROTAE-700 & E-800 rotary paddle level switches provide all the advantageous features of the previous series in one unit. Dust Ex versions are available for use in hazardous environments.LEVEL SWITCHESMAIN FEATURESLevel switching offree flowing solidsCable or rod extendedversions up to 3 mAutomatic motor shutdownHigh temperature versionIP 67 protectionDust-Ex certified versionCERTIFICATIONSATEXII 1/2D Ex tb IIIC T_ _ °C IP67TYPE SELECTIONAPPLICATIONSFood industry: sunflower, sunflowercod, coffee and, cacao powder,flour, sugar, etc.Chemical industry:plastic powders, granules, pelletsBuilding industry: cement, sand,calcium powder, gypsumEnergy industry: active soot,coal powder, fly ashFor appropriate model selection the followingshould be taken into consideration:Insertion length:– Level switching application (low or high level switch) and theposition of installation determine the insertion length.Number of vanes:– Specific gravity and particle size of the material providesorientation for the number of vanes.– Most commonly used is the stainless steel, single vane paddle.This paddle can be passed through the respective threaded connection.– For lighter materials the use of 3-vane paddle is recommended.Flexible coupling:– Use if the shaft of the instrument has to be protected against falling materials.(rocks, larger lumpy materials)TYPE SELECTIONNIVOROTA E-700 E-800Metal housing –Plastic housing –Single vane paddleMulti-vane paddleFlexible couplingCable extensionDC power supplyDust Ex version –High temperature version –1” process connection1 1/2 ” process connectionTorque adjustmentMaterial Density (kg/dm 3 )*Wheat 0.4 – 0.5Flour 0.6 – 0.8Wood chip 0.3 – 0.4Sawdust 0.3 – 0.35Whiting 0.8 – 1Lime hydrate dust 0.4 – 0.5PVC dust 0.3 – 0.6PVC granule 0.3 – 0.6Sunflower corn 0.3 – 0.5Sunflower cod 0.1 – 0.2Feed 0.2 – 0.6Ground paprika 0.8 – 1* Informative dataEK-7001-vane paddle withflexible couplingEH-700High temperature type,rod extended versionEK-7003-vane paddle90

LEVEL SWITCHESROTARY PADDLE LEVEL SWITCHESNIVOROTATECHNICAL DATATYPEInsertion lengthPaddle material, number of vanesRotation speedNIVOROTA EK–700/800Normal typeStandard: 200 mm, max. 3 mStainless steel DIN 1.4571 / 1, 3; as per order code 1 rotation / min.Material of wetted parts Stainless steel DIN 1.4571Medium density (guidline value) min. 0.1 kg / dm 3NIVOROTA EH–700High temperature typeMaterial of the sealing NPR FPMEK-700: –20 °C … +120 °CMedium temperatureEK-800: –20 °C … +80 °C–20 °C … +200 °CEx type: See special data for Ex certified models tableAmbient temperature –30 °C … +60 °CMedium pressuremax. 0.3 MPa (3 bar)Outputmicroswitch: SPDT 250 VAC, 10 A, AC1Paddle-rotation / shutdown indicationBi-colour (green/red) LEDProcess connection1", 1½", as per order codePower supply 24 V AC, 24 V DC, 120 V AC, 230 V AC (+10% –15%)Power consumptionmax. 4 VA (4W)Electrical connectionCable gland: 2 pcs. plastic M20x1.5; for Ø6..12 mm cable, screw terminal for: 0.5..2.5 mm 2 wire cross sectionElectrical protection Class I.Ingress protectionIP67Housing material Paint coated aluminium or plastic (PBT) Paint coated aluminiumMass1.7 kg, cable extension: 1.4 kg/m, counterweight: 1 kg, rod extension: 1.6 kg/mLEVEL SWITCHESSPECIAL DATA FOR EX CERTIFIED MODELSProtection typetDEx marking ATEX II 1/2 D Ex tb IIIC T__ ˚C IP67Electrical connection2 pcs. steel M20x1.5 cable glands for Ø 8 ... 13 mm cableTemperature data Normal type High temperature typeTemperature class T85 ˚C T100 ˚C T135 ˚C T85 ˚C T100 ˚C T135 ˚C T200 ˚CMedium temperature 85 ˚C 100 ˚C 120 ˚C 85 ˚C 100 ˚C 120 ˚C 200 ˚CAmbient temperature 65 ˚C 65 ˚C 50 ˚C 65 ˚C 65 ˚C 65 ˚C 65 ˚CMax. surface temperature 85 ˚C 100 ˚C 120 ˚C 85 ˚C 100 ˚C 120 ˚C 200 ˚CWaiting time for opening the cover 30 min. 20 min. 5 min. 30 min. 20 min. 5 min. 0 min.OPERATION MODESPower supply Status LED Output microswitch PaddleMOUNTINGminimum distanceof protectiveshield:150 mmhalf pipe shieldONGreenDe-EnergisedRotateplate shieldRedEnergisedNotrotateOFFDarkDe-EnergisedNotrotateProtection of Low Fail-Safe unit by shield91

LEVEL SWITCHESLEVEL SWITCHESROTARY PADDLE LEVEL SWITCHESNIVOROTA E-700/800Rotary paddle level switch for powders and granular solidsInsertion length: Standard: 200 mmRod extended version: 3 mCable extended version: 3 mFlexible coupling can be ordered separatelyMedium density: min. 0.1 kg/dm³Housing: Aluminium or plasticMotor on/shutdown indicationIngress protection: IP67Ex marking: ATEX x II 1/2 D Ex tb IIIC T__°C IP67TypeBase price in HRKEXX XXX X 1 350,00VersionAdd on prices in HRKE X XXX XK Standard version 0,00H High temperature version 1 020,00NIVOROTA EK_-_02-_NIVOROTAProbe version / Paddle / Process connectionAdd on prices in HRKEX XXX XA Standard / 1-vane paddle / 1" BSPT 0,00H Standard / 1-vane paddle / 1 1/2" BSPT 170,00K With cable extension / 1-vane paddle / 1 1/2" BSPT 561,00R With rod extension / 1-vane paddle / 1 1/2" BSPT 638,00F * Standard / 3-vane paddle / 1 1/2" BSPT 187,00L * With cable extension / 3-vane paddle / 1 1/2" BSPT 748,00Housing / Material of process connectionAdd on prices in HRKEXX XX X7 Aluminium (paint coated) / 1.4571 140,008 Glass fibre reinforced plastic / 1.4571 (Ex version not available) 0,00Insertion lengthAdd on prices in HRKEXX X X0 2 Standard version 200 mm 0,000 3 - 3 0 0.3-3 m probe with rod extension; each started 0.1 m 34,001 0 - 3 0 1, 2 or 3 m probe with cable extension; each started 1 m 59,50Power supply / ApprovalAdd on prices in HRKEXX XXX1 230 V AC 0,002 120 V AC 0,003 24 V AC 340,004 24 V DC 459,005 230 V AC / Ex 272,006 120 V AC / Ex 272,007 24 V AC / Ex 612,008 24 V DC / Ex 731,00E NIVOROTA EKR-_ _ _ -_NIVOROTA EKL-_ _ _ -_* Mounting plate should be ordered separatelyNIVOROTA EH_-_02-_NIV24NIVOROTA EKA-702-1NIVOROTA EKH-702-192

LEVEL SWITCHESROTARY PADDLE LEVEL SWITCHESNIVOROTANIVOROTA E-700Accessories to orderMounting / MaterialPrice in HRKE A M 7 01 1" female nut / 1.4571 102,002 1 1/2" female nut / 1.4571 153,003 Sliding sleeve for rod extended version / 1.4571 570,004 Mounting plate, 1" hole / 1.4571 221,005 Mounting plate, 1" hole / carbon steel 170,006 Mounting plate, 1 1/2" hole / 1.4571 272,007 Mounting plate, 1 1/2" hole / carbon steel 213,00EAM 70Flexible couplingPrice in HRKE A S 7 0 1 Stainless steel 335,00EKA-702-1M30000EKF-702-1M30000LEVEL SWITCHESAdapterPrice in HRKE A A 6 0 1 1" BSP / 1 1/2" BSP (1.4571) 326,00E A A 6 0 2 1" BSP / 1 1/2" NPT (1.4571) 326,00E A A 6 0 3 1 1/2" BSP / 2" BSP (1.4571) 612,00EKH-402-1M00001 1 1/2" BSP / 1 1/4" NPT (1.4571) 326,00EAS-701EAM-703Paddles / MaterialPrice in HRKEKA-702-1M30000 1-vane / 1.4751 153,00EKF-702-1M30000 3-vane / 1.4751 238,00EAA-601EKH-402AccessoriesPrice in HRKE A W 7 0 1 Weight, 1.4571 323,00EAM-704 – EAM-70793

LEVEL SWITCHESRF CAPACITANCE LEVEL SWITCHESNIVOCAP CKLEVEL SWITCHESGENERAL DESCRIPTIONThe NIVOCAP CK-100 series new generation capacitive level switches unlike the traditional capacitive principle they operate as capacitancemeters in the RF (radio-frequency) range. The most advantageous feature of this technique is that the instrument is less sensitive to deposits,therefore the NIVOCAP CK-100 is an excellent choice for those adhering, sticky substances where the vibrating or the other contacting levelswitches are not applicable.The mechanical construction consists of a stainless steel probe and a reference probe between two insulations and the electronics alwaysmeasure the voltage level proportional to the capacitance difference between the two probes and the housing. This way it provides morestabile measurement compared to the analogue capacitance switches. The high temperature Dust-Ex models are suitable for harsh environmentalpower generation applications.MAIN FEATURESIntelligent electroniclevel switchNot sensitive to depositsEasy calibrationSelectable sensitivityFail-safe operation modeRod or cableextended versionHigh temperature versionDust-Ex modelsAPPLICATIONSFor solids with ε r ≥ 1.5 relativedielectric constant and liquidsFor adhering, sticky materialsPharmaceutical and food industryPower generation processesTECHNICAL DATAType Normal type High temperature typeMaximal probe lengthProcess connectionHousing materialMaterial of wetted partsRod extended: 3 mCable extended: 10 m¾”, 1”, 1 ½” BSP / NPT threaded connectionPaint coated aluminiumDIN 1.4571 stainless steel + PPS insulationMedium temperature -30 C°…+90 °C -30 °C…+220 °CProcess pressureSensitivityFail-safe mode3 bar (at 25 °C)Selectable with push button;4 LED displayFine: adjustable with potentiometerwithin the selected rangeLow, high (selectable with DIP-switch)εr Min. 1.5OutputRelay: SPDT 250 V AC; 8A, orelectronic switch: 250 V AC; 3.5ATo be launched in the2nd quarter!Technical specification is onlyinformative data. For further detailsplease call or sales department!Electrical protection Class I.Power supply20-255 V AC/DCIngress protection IP 67NIVOCAP CK-10094

LEVEL SWITCHESRF CAPACITANCE LEVEL SWITCHESNIVOCAP CKNIVOCAP CK-100High frequency (RF) capacitance level switch, for powders and granular solids, and for liquidsProbe length: standard: 300-600 mmrod extended: max. 3 mcable extended: max. 10 mStainless steel (1.4571) probe, PPS insulationPower supply: 20-255 V AC/DCIngress protection: IP67TypeBase price in HRKC XX XXX X 3 320,00VersionAdd on prices in HRKC X XXX XK Standard version 0,00M High temperature version (cable extension not available) 510,00Probe version / Process connectionAdd on prices in HRKC X XXX XD Standard / 3/4" BSP 0,00G Standard / 3/4" NPT 0,00M Standard / 1" BSP 0,00P Standard / 1" NPT 0,00H Standard / 1 1/2" BSP 170,00N Standard / 1 1/2" NPT 170,00R With rod extension / 1 1/2" BSP 850,00L With rod extension / 1 1/2" NPT 850,00K With cable extension / 1 1/2" BSP 1 060,00C With cable extension / 1 1/2" NPT 1 060,00LEVEL SWITCHESHousingAdd on prices in HRKC XX XX X1 Aluminium (paint coated) 0,00Probe lengthAdd on prices in HRKC XX X X0 3 0 6 Standard version 0,3-0,6 m 0,000 7 3 0 0,7-3 m probe with rod extension; each started 0.1 m 68,0010 A 0 1-10 m probe with cable extension; each started 0.5 m 102,00Output / ExAdd on prices in HRKC XX XXX1 SPDT, potential free relay; 250 V AC, 8 A 0,003 Solid state output 0,005 Dust Ex, SPDT, potential free relay; 250 V AC, 8 A * 493,00C * Approval is pending95

LEVEL SWITCHESNOTESLEVEL SWITCHES96

ANALYTICSGENERAL DESCRIPTIONpH and ORP TRANSMITTERSAnaCONTThere is a constant demand for analyticalmeasurements in practically all industries.Analysis of fluids and reliable control over thefeeding of various chemicals is especially crucial inthe water and wastewater, pharmaceutical, chemical,food and beverage, power industries.NIVELCO’s AnaCONT analytical range providesHART-capable transmitters for pH, ORP,dissolved oxygen and conductivity measurement.The AnaCONT LEP pH transmitters are able to coverthe whole 0-14 pH scale.The AnaCONT LER ORP transmitters measure in±1000 mV measuring range.The AnaCONT LED Dissolved Oxygentransmitters use 10 ppm or 20 ppm probes.All the three transmitters are available in compact,integrated and separated types.The AnaCONT LCK mini compact conductivitytransmitters provide various mounting positionsmaking possible their use in diverse industrialapplications.2-wire pH and ORP transmittersCompact and integrated transmittersMeasuring range:pH: 0 - 14, ORP: ±1000 mVReplaceable electrodesTemperature compensated4-20 mA, HART communicationSeparated versions up to 10 mIP67, IP68 protectionExplosion-proof modelsDISSOLVED OXYGEN TRANSMITTERSAnaCONT2-wire DO transmittersCompact and integrated transmittersMeasuring range: 0 - 20 ppmReplaceable probesTemperature compensated4-20 mA, HART communicationPower relay outputSeparated versions up to 10 mIP67, IP68 protectionExplosion-proof modelsCONDUCTIVITY TRANSMITTERSAnaCONTpage 99page 106ANALYTICS2-wire EC transmittersMini compact typeMeasuring range:1 μS/cm - 2 mS/cmOptional plug-in4-digit LED display4-20 mA, HART communicationIP68 / IP65 protectionExplosion-proof modelspage 11097

ANALYTICSANALYTICS98

ANALYTICSpH and ORP TRANSMITTERSAnaCONTGENERAL DESCRIPTIONThe AnaCONT instruments are designed to measure pH and redox potential values of liquids and aqueous solutions.pH measurement: Continuous measurement of acidity (pH7 ) liquids can be performed by the help of AnaCONT transmitters. The necessary feedingof chemicals and other technological functions can be controlled by the processed measured values. The potential difference between the submerged measuring and reference probegenerates a voltage proportional to the concentration of the hydrogen ion in the measured fluid. This voltage is evaluated by the signal processing electronic module of the instrument.Based on the signals of the submerged probe and the temperature sensor the smart signal processing electronic module calculates a pH value normalized to 25°C and generatesa proportional output signal. The long term stability and accuracy of the measurement requires a periodic calibration of the sensors using the standard buffer solutions.Redox potential (ORP) measurement: Similarly to the pH measurement, the measurement of the redox potential is based on the potential difference between measuringand reference probes. Oxidation or reduction occurs on the platinum surface of the measuring probe. Redox potential is a parameter that indicates the sum of oxidants and reducersin the measured medium. The output signals of the probes are processed by the electronic unit and it converts them into a proportional output signal. In order to get the desiredmedium parameters the reduction of liquids or feeding of suitable oxidant is executed based on the formerly processed values.MAIN FEATURESCompact and integrated typesSeparated versions up to 10 mMeasuring range: pH: 0-14 ;ORP: ±1000 mVWide probe selection accordingto the applicationUser friendly software, graphic display4-20 mA, HART, relay outputMeasurement simulationWide range of accessoriesIP67 / IP68 protectionANALYTICSAPPLICATIONSChecking of water qualityWater production, Wastewater treatmentPharmaceutical industryFood and beverage industryCERTIFICATIONSATEXII 1G Ex ia IIB T6 GaLPP-100 / LPR-100with PVDF housingLEP-200 / LER-200with Aluminiumhousing and PVDFprobe housingCompactLEP-100 / LER-100with plastichousing andPP probe housing IntegratedLPP-100 / LPR-100with PP housingpH, ORP electrodesSAP-300 displayCleaning solutionCalibration solutionMultiCONT99

ANALYTICSpH and ORP TRANSMITTERSAnaCONTANALYTICSTECHNICAL DATAGeneral data LoP , pH transmitter LoR , ORP transmitterMeasuring valuesTemperature measurement(semiconductive sensor)Liquid-potential(complementary) electrodeProbe inputPower supply / Power consumptionAnalogueOutputRelayDisplayDigital communicationRange: 0…14pH Reserve: ±2pHResolution: 0.01pH (internal resolution 0.004 pH)Linearity: ±0.004 pHRange: ±1000 mV Reserve: ±200 mVResolution: 0.1 mV (internal resolution 0.8 mV)Linearity: ±0.001%Accuracy*: 0.1%- of the measured value ±1 digit ±0.01%/°C, Measuring rate: 300 msec, on the display (refreshing rate): 1 secRange: -50…130°C, Accuracy: ±0.5°C, Resolution: 0.1°CStainless steel housing of the temperature sensor (1.4571), connection: SN6Combined probe, galvanic isolation, input impedance: >10 12 ohm, connection: SN612…36 V DC / 48 mW…720 mW, galvanic isolated, protection against surge transients4…20 mA, (3.9…20.5 mA), R tmax = 1200 galvanic isolated, protection against surge transientsSPDT - 30 V DC, 1A DCSAP-300 LCD graphic display, units of measure and bar graph (only for compact type)HART interfaceMedium temperature(pressure dependent) *PP probe housing: -10 °C…+90 °C, PVDF probe housing: -15 °C…+100 °CPressure (absolute) *0.05…1 MPa (0.5…10 bar) at 25 °C)Ambient temperature With metal housing: -30 °C…+70 °C, with plastic housing: -25 °C…+70 °C, both with display: -20 °C…+70 °CSealingPP probe housing: EPDM, All other probe housing: FPM (Viton)Ingress protection Probe housing: IP 68, Electronic housing: IP 67; Integrated type: IP 68Housing materialCompact type: Paint coated aluminium or plastic PBT, Integrated type: Same as the probe housingProbe housing materialElectrical connectionElectrical protection* Depends on the applied probePolypropylene (PP), KYNAR (PVDF)Compact type: 2 x M20x1.5 metal cable gland for cable: Ø 7 … 13 mm, or 2 x M20x1.5 plastic cable gland for cable: Ø6 … 12 mmconnecting cable cross section: 0.5 ... 1.5 mm 2 (shielded cable is recommended) + internal thread 2x NPT ½" cable protective pipe,Integrated type: 6x0.5mm2 shielded cable Ø6 mm x 5 m (up to max. 30 m cable lengthClass III. electric shock protectionSpecial data for Ex certified modelsEx marking ATEX II1G Ex ia IIB T6 GaIntrinsical safe dataCi 15 nF, Li 200 μH, Ui 30 V, Ii 140 mA, Pi 1 W, For Ex transmitter only Ex ia power supply should be used!Ex power supply, max. loadUo < 30 V, Io < 140 mA, Po < 1 W, , Supply voltage range: 12 V – 30 V, Rt max = (Ut - 12 V) / 0.022 AMedium temperature PP probe housing: -10…+70 °C, PVDF probe housing: -15…+80 °CAmbient temperature Metal housing: -30 °C…+70 °C, with display: -20 °C…+70 °C, Plastic housing: -20 °C…+70 °CIn analytics the primary requirements of accurate and reliable measurement is the right selection of probes.pH probesMediumCleanliquidSolid particlesin the mediumORP probesMediumCleanliquidSolid particlesin the mediumMax. temp.(°C)Max. pressure(bar)Min. conductivity(μS/cm)pHMaterialMountingangleApplication areas60 0,51-12potable water, pool60 3 1-12 potable water, pool80 6 1-12 glass max. 45° process water, galvanic15080 8 1-12 process water, treated wastewater100 3/100°C; 6/25°C 3-14 chemical industry60 3 1-12 polycarbonate max. 90° potable water, pool80 6 50 1-12treated wastewaterglass max. 45°100 6 / 100°C; 16 / 25°C 500 1-12 sludge, emulsionMax. temp.(°C)Max. pressure(bar)Min. conductivity(μS/cm)MaterialMountingangleApplication areas60 1potable water, pool60 3 glass max. 45°potable water, pool15080 6 process water60 3 polycarbonate max. 90° potable water, pool, treated wastewater80 6 50sludge, emulsionglass max. 45°100 6 / 100°C; 16 / 25°C 500 sludge, emulsion100

ANALYTICSpH and ORP TRANSMITTERSAnaCONTMOUNTING VERSIONSThe constructions of the sensors on the compact and integrated versions are identical, so allaccessories are applicable for both types.The applications of the special accessories make the optimal installation of the transmittersinto the technologic process easier.By using extension pipes or extension cables the separated versions allow the mounting of theelectronics and the electrode part at any distance from each other.SEPARATED COMPACT TRANSMITTERSignal processingCOMPACT TRANSMITTERIntegrated transmitterProbe housing+cable extensionLAK–LAA–10TSuspendedProbe housing+cable extension+pipe extensionANALYTICSCompact transmitter+ pipe extensionSuspended Probehousing+pipe extension+slidingsleeve withflangeLAF–LAR–Compact transmitter+pipe extension+sliding sleeve with flangeLAR–LAA–10Suspended Probehousing+cable extension+pipe extension+console mountingbracketLAF–LAA–10LAA–10KLAR–SENSOR PROTECTION TUBELAA–10KCompact transmitter+pipe extension+console mounting bracketFor standard typeThe protection tube can bescrewed onto the probe socketit protects the probe from themechanical impacts.LAP– 20For extended versionLAP– 10101

ANALYTICSpH TRANSMITTERSAnaCONT L - 2-wire versionCompact analytical pH transmitter with current / HART and control relay outputHousing: aluminium or plasticCombined electrodepH measuring range: 0-14 pHTemperature sensor socket: Stainless steelIngress protection: IP67/IP68Power supply: 12-36 V DCEx marking: ATEX x II 1 G Exia II B T6 GaProgramming:With SAP-300 display: full feature programmingRemote programming: for HART capable units with the MultiCONT controller.TypeBase price in HRKLX XXX XP Compact pH transmitter 4 930,00AnaCONT LEPAnaCONTANALYTICSProgrammer and local indicator (SAP-300)Add on prices in HRKL X XXX XE Not included 0,00G Included 544,00HousingAdd on prices in HRKLXX XX X1 Plastic, PBT, glass fibre reinforced 0,002 Aluminium (paint coated) 140,00Probe / pH range / Max. pressure / Max. temperature / MediumAdd on prices in HRKLXX X X X1 1-12 / 6 bar / 80°C / with solid particles 0,00 2 1-12 / 8 bar / 80°C / clear fluid 0,003 1-12 / 16 bar@25°C / 100°C / with solid particles 0,00 4 3-14 / 6 bar / 100°C / clear fluid 34,005 1-12 / 0.5 bar / 60°C / clear fluid -170,006 1-12 / 3 bar / 60°C / clear fluid -136,007 1-12 / 6 bar / 80°C / clear fluid -119,00 8 * 1-12 / 3 bar / 60°C / clear fluid 485,00Process connection / MaterialAdd on prices in HRKLXX XX X1 1 1/2" BSP / PP 0,002 1 1/2" BSP / PVDF 275,004 1 1/2" NPT / PP 0,005 1 1/2" NPT / PVDF 275,00Output / ApprovalAdd on prices in HRKLXX XXX2 4-20 mA / none 0,004 4-20 mA with HART / none 688,006 4-20 mA / Ex 748,008 4-20 mA with HART / Ex 1 440,00R 4-20 mA + relay 255,00H 4-20 mA with HART + relay 943,00L * Horizontally mountableAccessories to orderTypePrices in HRKS A P 3 0 0 Plug-in display module (See "Electronic accessories") 544,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2 090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2 280,00102

ANALYTICSpH TRANSMITTERSAnaCONTAnaCONT L - 2-wire versionIntergrated compact pH transmitterPlastic housingCombined electrodepH measuring range: 0-14 pHTemperature sensor socket: Stainless steelIngress protection: IP68Power supply: 12-36 V DCEx marking: ATEX x II 1 G Exia II B T6 GaRemote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.TypeBase price in HRKLP 1 X X XP Integrated compact pH transmitter 4 170,00AnaCONT LPPProbe / pH range / Max. pressure / Max. temperature / MediumAdd on prices in HRKLPX 1 X X1 1-12 / 6 bar / 80°C / with solid particles 0,00 2 1-12 / 8 bar / 80°C / clear fluid 0,003 1-12 / 16 bar@25°C / 100°C / with solid particles 0,00 4 3-14 / 6 bar / 100°C / clear fluid 34,005 1-12 / 0.5 bar / 60°C / clear fluid -170,006 1-12 / 3 bar / 60°C / clear fluid -136,007 1-12 / 6 bar / 80°C / clear fluid -119,00 8 * 1-12 / 3 bar / 60°C / clear fluid 485,00ANALYTICSProcess connection / MaterialAdd on prices in HRKLPX 1X X1 1 1/2" BSP / PP 0,002 1 1/2" BSP / PVDF 275,004 1 1/2" NPT / PP 0,005 1 1/2" NPT / PVDF 275,00Output / ApprovalAdd on prices in HRKLPX 1XX4 4-20 mA with HART / none 0,008 4-20 mA with HART / Ex 748,00H 4-20 mA with HART + relay 255,00LP 1* Horizontally mountableAccessories to orderTypePrices in HRKS A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2 090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2 280,00103

ANALYTICSORP TRANSMITTERSAnaCONT L - 2-wire versionCompact analytical ORP (Redox potential) transmitter with analogue and digital output and relayHousing: aluminium or plasticCombined electrodeORP measuring range: ±1000 mVTemperature sensor socket: Stainless steelIngress protection: IP67/IP68Power supply: 12-36 V DCEx marking: ATEX x II 1 G Exia II B T6 GaProgrammingWith SAP-300 display: full feature programmingRemote programming: for HART capable units with the MultiCONT controller.TypeBase price in HRKLX XXX XR ORP transmitter 5 230,00AnaCONT LERAnaCONTANALYTICSProgrammer and local indicator (SAP-300)Add on prices in HRKL X XXX XE Not included 0,00G Included 544,00HousingAdd on prices in HRKLXX XX X1 Plastic, PBT, glass fibre reinforced 0,002 Aluminium (paint coated) 140,00Probe / Min. conductivity / Max. pressure / Max. temperature / Medium Add on prices in HRKLXX X X X1 50 μS/cm / 6 bar / 80°C / with solid particles 0,002 500 μS/cm / 16 bar@25°C / 100°C / with solid particles 0,003 150 μS/cm / 0.5 bar / 60°C / clear fluid -340,004 150 μS/cm / 3 bar / 60°C / clear fluid -314,50 5 150 μS/cm / 6 bar / 80°C / clear fluid -238,00 6* 150 μS/cm / 3 bar / 60°C / clear fluid 434,00Process connection / MaterialAdd on prices in HRKLXX XX X1 1 1/2" BSP / PP 0,002 1 1/2" BSP / PVDF 275,004 1 1/2" NPT / PP 0,005 1 1/2" NPT / PVDF 275,00Output / ApprovalAdd on prices in HRKLXX XXX2 4-20 mA / none 0,004 4-20 mA with HART / none 688,006 4-20 mA / Ex 748,008 4-20 mA with HART / Ex 1 440,00R 4-20 mA + relay 255,00H 4-20 mA with HART + relay 943,00L * Horizontally mountableAccessories to orderTypePrices in HRKS A P 3 0 0 Plug-in display module (See "Electronic accessories") 544,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2 090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2 280,00104

ANALYTICSORP TRANSMITTERSAnaCONTAnaCONT L - 2-wire versionIntergrated compact ORP (Redox potential) transmitterPlastic housingCombined electrodeORP measuring range: ±1000 mVTemperature sensor socket: Stainless steelIngress protection: IP68Power supply: 12-36 V DCEx marking: ATEX x II 1 G Exia II B T6 IP67Remote programming: for HART capable units with HART modem and the EView softwareor with the MultiCONT controller. The EView light software (on DVD) is provided free of charge.TypeBase price in HRKLP 1 X X XR Integrated compact ORP transmitter 4 460,00AnaCONT LPRProbe / Min. conductivity / Max. pressure / Max. temperature / Medium Add on prices in HRKLPX 1 X X1 50 μS/cm / 6 bar / 80°C / with solid particles 0,002 500 μS/cm / 16 bar@25°C / 100°C / with solid particles 0,003 150 μS/cm / 0.5 bar / 60°C / clear fluid -340,004 150 μS/cm / 3 bar / 60°C / clear fluid -314,50 5 150 μS/cm / 6 bar / 80°C / clear fluid -238,00 6* 150 μS/cm / 3 bar / 60°C / clear fluid 434,00ANALYTICSProcess connection / MaterialAdd on prices in HRKLPX 1X X1 1 1/2" BSP / PP 0,002 1 1/2" BSP / PVDF 275,004 1 1/2" NPT / PP 0,005 1 1/2" NPT / PVDF 275,00Output / ApprovalAdd on prices in HRKLPX 1XX4 4-20 mA with HART / none 0,008 4-20 mA with HART / Ex 748,00H 4-20 mA with HART + relay 255,00LP 1* Horizontally mountableAccessories to orderTypePrices in HRKS A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2 090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2 280,00105

ANALYTICSDISSOLVED OXYGEN TRANSMITTERSAnaCONTGENERAL DESCRIPTIONThe dissolved oxygen (DO) measurement gives the quantity of dissolved oxygen gas in the liquid, in ppm or mg/l values.The sensor with oxygen-permeable membrane immersed in the liquid provides an electronic signal proportional to the oxygen concentration.The intelligent electronics calculates and transmits the DO value normalized to 25°C on the basis of the output current of the DO sensor and the potential of the temperature sensor immersedin the medium.MAIN FEATURESANALYTICSCompact and integrated versionsSeparated versions up to 10mMeasurement range: pH: 0-14,ORP: ±1000 mV, DO: 0-20 ppmWide probe selection suitable formost applicationsTemperature compensationGraphic display4-20 mA, HART, relay outputIP67 / IP68 protectionEx versionAPPLICATIONSChecking of water qualityWastewater treatmentPharmaceutical industryFood and beverage industryEffluent treatmentChecking of aeration in potable waterPoolsCERTIFICATIONSATEXII 1G Ex ia IIB T6 GaCompactLED-200with Aluminiumhousing andPVDF probe housingCompactLED-100IntegratedLPD-100PROBE SELECTIONDO sensorsSAT-304 HART modemSAP-300 graphic displayType 4x085g0023ydo 4x085g0022ydoDOsensorApplication areaFish- and crawfish farms, waterconditioning of large aquariums.Controlling of oxygenconcentration in water plants,determination of biologicalcondition in surface water.Potable water production, rivermonitoring, water treatment sites,controlling of dissolved oxygenlevel in wastewater plants,determination of biologicalcondition in surface water.DO range 0-20 ppm 0-10 ppmProcess temperature max. 50°CProcess pressureSpeed of medium-flowmax. 1 barmin. 0.05m/sMaterial / thickness of membrane PTFE / 125 μm PTFE / 50 μm106

ANALYTICSDISSOLVED OXYGEN TRANSMITTERSAnaCONTTECHNICAL DATAGeneral dataRangeLoD - DO transmitter0 – 20 ppm v. 0 – 10 ppmReserve 20%MeasurementdataResolutionLinearityAccuracy*Measuring cycle0.01 ppm (internal resolution 0.005 ppm)±0.05 ppm0.5% of the measured value±1 digit ±0.01% / °C300 msec, on display: 1 secTemperature measuring (semiconductive sensor) Range: -50…130 °C, Accuracy: ±0.5 °C, Resolution: 0.1 °CLiquid potential (complementary) electrodeElectrode inputPower supply / Power consumptionAnalogueRelayOutputDisplayHousing of the temperature sensor: stainless steel (1.4571), connection: SN6DO sensor input: Galvanic isolated current input,0.725V polarisation voltage, connection: SN612…36 V DC / 48 mW…720 mW, galvanic isolated, protection against surge transients4 – 20 mA, (3.9 – 20.5 mA), R tmax = 1200 Ohm galvanic isolated,protection against surge transients (only for compact type)SPDT: 30 V DC, 1A DCSAP-300 LCD graphic display, units of measure and bar graph (only for compact type)ANALYTICSDigital communicationHART interface, terminal resistance 250 OhmMedium temperature (pressure dependent)* PP probe housing: -10 °C…+90 °C, PVDF probe housing: -15 °C…+100 °CPressure (absolute)* Max. 0.1 MPa (1 bar) at +25 °CAmbient temperature Aluminium housing: -30 °C…+70 °C, Plastic housing: -25 °C…+70 °C, With display: -20 °C…+70 °CSealingPP probe housing: EPDM, all other probe housing: FPM (Viton)Ingress protection Compact type: Probe housing: IP 68, Electronic housing: IP 67; Integrated type: IP 68Housing materialMaterial of probe housingElectrical connectionElectrical protectionCompact type: plastic (PBT) or paint coated aluminium, Integrated type: same as probe housingPolypropylene (PP), KYNAR (PVDF)Compact type: 2xM20x1,5 plastic cable glands for cable: Ø6…12 mm, or 2xM20x1.5 metal cable glands for cable: Ø7…13 mmwire cross section: 0.5…1.5 mm 2 (shielded cable is recommended), + 2 x NPT 1/2" internal thread for cable protective pipeIntegrated type: 6x0.5 mm 2 shielded cable, Ø6 mm x 5 m standard (up to max. 30 m cable length)Class III. electric shock protection* Depends on the applied probeSpecial data for Ex certified modelsEx marking ATEX II 1G Ex ia IIB T6 GaIntrinsically safe dataEx power supply, max. loadCi 15 nF, Li 200 μH, Ui 30 V, Ii 140 mA, Pi 1 W, For Ex transmitter only Ex ia power supply should be used!U 0 < 30 V, I 0 < 140 mA, P 0 < 1 W, Supply voltage range: 12 V … 30 V, Rt max = (Ut - 12 V) / 0.02 AMedium temperature PP probe housing: -10 °C…+70 °C, PVDF probe housing: -15 °C…+80 °C; DO transmitter: 0 °C...+50 °CAmbient temperature Aluminium housing: -30 °C…+70 °C, Plastic housing: -20 °C…+70 °C, With display: -20 °C…+70 °CAnaCONT IN SYSTEM WITH MultiCONTThe MultiCONT can handle digital data fromup to 15 HART transmitters for the measuringof different values (e.g. DO temperature,level, pressure). The digital (HART) informationis processed, displayed and if needed itcan be transmitted via RS485 communicationline to a PC. Remote programming ofthe transmitter is also possible. Visualisationon a PC can be accomplished with NIVISIONprocess visualisation software.HARTRS485107

ANALYTICSDISSOLVED OXYGEN TRANSMITTERSAnaCONTMOUNTING VERSIONSThe constructions of the sensors on the compact and integrated versions are identical, so all accessories are applicable for both types.The applications of the special accessories make the optimal installation of the transmitters into the technologic process easier.By using extension pipes or extension cables the separated versions allow the mounting of the electronics and the sensor part at any distance from each other.COMPACT TRANSMITTERSEPARATED COMPACT TRANSMITTERIntegrated transmitterSignalprocessingANALYTICSCompact transmitter+pipe extensionProbe housing+cable extensionLAK–LAA–10TSuspendedProbe housing+cable extension+pipe extensionLAR–Compact transmitter+pipe extension+ sliding sleeve with flangeSuspended Probehousing+pipe extension+slidingsleevewith flangeLAF–LAR–LAA–10LAA–10SuspendedProbe housing+cable extension+pipe extension+console mountingbracketLAR–LAF–LAA–10KLAA–10KCompact transmitter+pipe extension+console mounting bracket108

ANALYTICSDISSOLVED OXYGEN TRANSMITTERSAnaCONTAnaCONT L - 2-wire versionCompact analytical dissolved oxigen transmitter with current / HART and control relay outputHousing: aluminium or plasticSensor: 20 ppm or 10 ppmIntegrated temperature compensation to 25°CIngress protection: IP67/IP68Power supply: 12-36 V DCEx marking: ATEX x II 1 G Exia II B T6 GaProgrammingWith SAP-300 display: full feature programmingRemote programming: for HART capable units with the MultiCONT controller.TypeBase price in HRKLX XXX XD Compact DO transmitter 5 780,00AnaCONT LEDProgrammer and local indicator (SAP-300)Add on prices in HRKL X XXX XE Not included 0,00G Included 544,00HousingAdd on prices in HRKLXX XX X1 Plastic, PBT, glass fibre reinforced 0,002 Aluminium (paint coated) 140,00ANALYTICSProbeLXX XAdd on prices in HRKX X2 DO1-mA-10 (10 ppm) 0,001 DO1-mA-20 (20 ppm) 646,00Process connection / MaterialAdd on prices in HRKLXX XX X1 1 1/2" BSP / PP 0,002 1 1/2" BSP / PVDF 275,004 1 1/2" NPT / PP 0,005 1 1/2" NPT / PVDF 275,00Output / ApprovalAdd on prices in HRKLXX XXX2 4-20 mA / none 0,004 4-20 mA with HART / none 688,006 4-20 mA / Ex 748,008 4-20 mA with HART / Ex 1 440,00R 4-20 mA + relay 255,00H 4-20 mA with HART + relay 943,00L Accessories to orderTypePrices in HRKS A P 3 0 0 Plug-in display module (See "Electronic accessories") 544,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2 090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2 280,00109

ANALYTICSCONDUCTIVITY TRANSMITTERSAnaCONTGENERAL DESCRIPTIONThe AnaCONT 2-wire mini compact conductivity transmitters are designed to measure the conductivity of a liquid and convert the input signal to 4 –20mA output. They are suitablefor measuring clean, non-crystallisable liquids. The design of the transmitter, the wide temperature range and various mounting positions make possible the use in diverse industrialapplications. Two probes are immersed into the measured liquid. The distance between the probes and their surface define the cell constant (K) of the instrument. The cell constantdefines the measuring range and thus the application area.MAIN FEATURESTECHNICAL DATAANALYTICSMini compact typeApplication oriented measuringrange selectionOptional plug-in display4-20 mA, HARTIP68 protectionAPPLICATIONSWater productionWater processingWater purificationWastewater treatmentPharmaceutical industryFood and beverage industryMini compactLCK-21+PLK-501TYPEMeasurementdataPower supplyProbeRangeAccuracyAnaCONT LCKmini compact1 μS/cm – 20 μS/cm10 μS/cm – 200 μS/cm100 μS/cm – 2000 μS/cm±3 % ±1 digit12-36 V DC galvanic isolated,protection against surge transients2-electrodes , built-inCell constant K=0.01, K=0.1; K=1OutputAnalogue4 – 20 mARelay –DisplayDigitalcommunicationOptional UNICONT PLK-501 displayHARTMedium temperature -10 °C … +70 °CPROBEProcess pressure0-1.6 MPa (0-16 bar)Ambient temperature 0 °C … +70 °CSealingVitonIngress protectionProbe housing: IP 68,Electronic housing: IP 65Housing material Stainless steel 1.4571Probe housing material1.4571 + PPElectrical connectionPg9 DIN 43650 connectorElectrical protectionClass III.OPERATIONI = distancebetween electrodesA = electrode surfaceMini compactLCK-21Mini compactLCK-23110

ANALYTICSCONDUCTIVITY TRANSMITTERSAnaCONTAnaCONT LCK - 2-wire versionMini compact conductivity transmitterStainless steel housing and probeMaterial of wetted parts: 1.4571Output: 4-20 mA + HARTPower supply: 12-36 V DCConduit connection: DIN43650 connectorIngress protection: IP67TypeBase price in HRKLCK 2 X X X 3 530,00Measuring rangeAdd on prices in HRKLCK 2 X X1 1-20 μS/cm (min. 3/4" BSP) 0,002 10-200 μS/cm (min. 3/4" BSP) 0,003 100-2000 μS/cm (min. 1" BSP) 0,00AnaCONT LCK-210Process connectionAdd on prices in HRKLCK 2 X X1 3/4" BSP 0,002 1" BSP 0,00ANALYTICSOutputAdd on prices in HRKLCK 2 X X 2 4-20 mA 0,004 4-20 mA + HART 417,00AnaCONT LCK-220LCK 2Accessories to orderUNICONT PLK-5012-wire loop indicatorPlug-in display that can be inserted between connectors according to DIN43650Input: 4-20 mAOutput: 4-20 mADisplay: LED 4 digits; heigth: 7.6 mmPlastic housing: IP65AnaCONT LCK-230TypePrices in HRKP L K 5 0 1 2 Plug-in display 1 570,00P L K 5 0 1 3 Plug-in display with PNP output 1 750,00UNICONT PLK-501111

ANALYTICSCONDUCTIVITY TRANSMITTERSAnaCONTGENERAL DESCRIPTIONThe AnaCONT 2-wire compact conductivity transmitters are designed to measure the conductivity of a liquid and convert the input signal to 4..20mAoutput. They are suitable for measuring clean, non-crystallisable liquids. The design of the transmitter, the wide temperature range and variousmounting positions make possible the use in diverse industrial applications. Two probes are immersed into the measured liquid. The distance betweenthe probes and their surface define the cell constant (K) of the instrument. The cell constant defines the measuring range and thus the application area.Coming soon!Technical specification isonly informative data.For further details, please callour sales department.ANALYTICSMAIN FEATURESCompact and integrated typesMeasuring range:0,05μS/cm – 200 mS/cmReplaceable probesApplication oriented probe selectionTemperature compensationGraphic display4-20 mA, HART, relay outputWide range of accessoriesIP67/68 protectionEx versionAPPLICATIONSWater productionWater processingWater purificationWastewater treatmentPharmaceutical industryFood and beverage industryCERTIFICATIONSATEXPROBEII 1G Ex ia IIB GaTECHNICAL DATATYPEAnaCONT LEK, LGKCompact typeAnaCONT LPKIntegrated typeMeasurementRange 0.05 μS/cm – 200 mS/cm *data Accuracy 1 % ±1 digit ±0,1 % / °CTemperature measurementRange: -50 °C … +130 °CAccuracy: ±0.5 °C ; Resolution: 0.1 °CProbe4-electrodes, replaceablePower supply12-36 V DC galvanic isolated,protection against surge transientsCell constantK=0.1; K=2.5Analogue4 – 20 mARelay(SPDT) 30 V DC, 1 A DCOutput Display SAP-300 graphic display –DigitalcommunicationHARTMedium temperature -10 °C … +90 °C-10 °C … +90 °C(only for probe housing)Process pressure0-1 MPa (0-10 bar)0-1 MPa (0-10 bar)(only for probe housing)Ambient temperature -25 °C … +70 °C-25 °C … +70 °C(only for probe housing)Process connectionAs per order codeSealingEPDM, VitonHousing materialProbe housing materialPaint coated aluminiumor plastic (PBT)Plastic (PP, PVDF)Same as theprobe housingElectrical connection2 x M20 x1.5, cable gland6 x 0,5 mm 2 shielded cableØ6 mm x 5 m(up to max. 30 m cable lengthElectrical protectionClass III.Ingress protectionProbe housing: IP 68,Housing: IP67IP 68Ex marking ATEX II 1 G Ex ia IIB Ga*** According to the diagram under ** Under approvalOPERATION112

ANALYTICSCONDUCTIVITY TRANSMITTERSAnaCONTAnaCONT L - 2-wire versionCompact analytical conductivity transmitter with current / HART and control relay outputHousing: aluminium or plasticSensor: 50 nS/cm - 200 mS/cmIntegrated temperature compensation to 25°CIngress protection: IP67/IP68Power supply: 12-36 V DCEx marking: ATEX x II 1 G Exia II B T6 IP67ProgrammingWith SAP-300 display: full feature programmingRemote programming: for HART capable units with the MultiCONT controller.TypeBase price in HRKLX XXX XK Compact conductivity transmitter 5 780,00Programmer and local indicator (SAP-300)Add on prices in HRKL X XXX XE Not included 0,00G Included 544,00HousingAdd on prices in HRKLXX XX X1 Plastic, PBT, glass fibre reinforced (Ex version not available) 0,002 Aluminium (paint coated) 140,00ANALYTICSProbeLXX XAdd on prices in HRKX X1 50 nS/cm - 5 mS/cm 417,002 2 μS/cm - 200 mS/cm 0,00Process connection / MaterialAdd on prices in HRKLXX XX X1 1 1/2" BSP / PP 0,002 1 1/2" BSP / PVDF 275,004 1 1/2" NPT / PP 0,005 1 1/2" NPT / PVDF 275,00Output / ApprovalAdd on prices in HRKLXX XXX2 4-20 mA / none 0,004 4-20 mA with HART / none 688,006 4-20 mA / Ex* 748,008 4-20 mA with HART / Ex* 1 440,00R 4-20 mA + relay 255,00H 4-20 mA with HART + relay 943,00L * Approval is pendingAccessories to orderTypePrices in HRKS A P 3 0 0 Plug-in display module (See "Electronic accessories") 544,00S A S 3 0 3 EView 2 software package (See "Electronic accessories") 5 140,00S A T 3 0 4 HART-USB modem (See "Electronic accessories") 1 520,00S A K 3 0 5 2 HART-USB/RS485 modem 2 090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2 280,00113

ANALYTICSACCESSORIESAnaCONTVarious installations can be achieved with usage of the accessoriesExtension pipeTypeBase price in HRKLAR XXX Pipe extension 1 060,00MaterialAdd on prices in HRKLAR XX1 PP 0,00Extension lengthAdd on prices in HRKLAR X0 2 30 0.2-3 m; each started 0.1 m 17,00LARLAR ANALYTICSPipe extension = LAll cables of required length and terminals are included!Pipe extension for seperate mountingBase price in HRKLAF XXX 213,00MaterialAdd on prices in HRKLAF XX1 PP 0,00Extension lengthAdd on prices in HRKLAF X0 2 30 0.2-3 m; each started 0.1 m 17,00LAFLAF Pipe extension = LAttention! Cables and terminals NOT included! The cable and terminal set LAK- for thepipe extended version for seperate mounting has to be ordered seperately (L + the distancebetween the mounting point and the electronics)!Cable extended versionBase price in HRKL A K XXX 791,00LAKMaterialAdd on prices in HRKLAK XX1 PP 0,00Extension lengthAdd on prices in HRKLAK X1 0 A 0 1-10 m cable set; each started 1 m 17,00LAK Terminals are included in the cable set!LAA-102Sliding sleeve/ ConsoleTypeBase price in HRKLAA 1 0 X 0,00Process connection / MaterialAdd on prices in HRKLAA 1 02 DN80 PN16 / PP 310,003 DN100 PN16 / PP 349,004 DN125 PN16 / PP 385,005 DN150 PN16 / PP 422,006 DN200 PN16 / PP 497,00LAA 10LAA-10KConsolesAdd on prices in HRKL A A 1 0 K 200 mm mounting bracket for extended version 422,00L A A 1 0 T 200 mm mounting bracket for basic version 422,00LAA-10T114

ANALYTICSACCESSORIESAnaCONTProbe protection tubeTypeBase price in HRKLAP XX 0 79,10MaterialAdd on prices in HRKLAP X 01 PP 0,00SizeAdd on prices in HRKLAP X 01 1 1/2" internal thread for extended version 0,002 2" external thread for basic version 79,10LAP-110LAP-120LAP 0Other components, accessories Discount class: 1 Base price in HRKpH probes4xpher112seph 1-12 / 6 bar / 80°C / with solid particles 1 160,004xphed112seph 1-12 / 8 bar / 80°C / clear fluid 1 160,004xphex112seph 1-12 / 16 bar@25°C / 100°C / with solid particles 1 160,004xpheph314sep 3-14 / 6 bar / 100°C / clear fluid 1 190,004xphe1120seph 1-12 / 0.5 bar / 60°C / clear fluid 774,004xphes112seph 1-12 / 3 bar / 60°C / clear fluid 833,004xphep112seph 1-12 / 6 bar / 80°C / clear fluid 876,004xphekl112sep* 1-12 / 3 bar / 60°C / clear fluid 1 810,00ANALYTICSSolutions for pH probes4vpuf4ph50mph Buffer solution pH4 / 50 ml 136,004vpuf4ph250ph Buffer solution pH4 / 250 ml 221,004vpuf4ph100ph Buffer solution pH4 / 1 l 757,004vpuf7ph50mph Buffer solution pH7 / 50 ml 155,004vpuf7ph250ph Buffer solution pH7 / 250 ml 221,004vpuf7ph100ph Buffer solution pH7 / 1 l 757,004vpuf10ph50ph Buffer solution pH10 / 50 ml 155,004vpuf10ph25ph Buffer solution pH10 / 250 ml 221,004vpuf10ph10ph Buffer solution pH10 / 1 l 757,004vtarkcI 350ph Storage solution KCl 3 mol / 50 ml 85,004vtarkcl 250ph Storage solution KCl 3 mol / 250 ml 247,004vtarkcl 310ph Storage solutionKCl 3 mol / 1 l 502,004vtiszold 25ph Cleaning solution / 250 ml 247,00ORP probes4xorrherpseor 50 μS/cm / 6 bar / 80°C / with solid particles 1 320,004xorrhexpseor 500 μS/cm / 16 bar@25°C / 100°C / with solid particles 1 330,004xorrheptseor 150 μS/cm / 0.5 bar / 60°C / clear fluid 791,004xorrhespseor 150 μS/cm / 3 bar / 60°C / clear fluid 850,004xorrheppseor 150 μS/cm / 6 bar / 80°C / clear fluid 952,004xorrheklseor* 150 μS/cm / 3 bar / 60°C / clear fluid 1 920,00Solutions for ORP probes4vpuf46550mor Buffer solution ORP 465 mV / 50 ml 136,004vpuf465250or Buffer solution ORP 465 mV / 250 ml 349,004vpuf465100or Buffer solution ORP 465 mV / 1 l 740,004vpuf22050mor Buffer solution ORP 220 mV / 50 ml 136,004vpuf220100or Buffer solution ORP 220 mV / 1 l 672,004vtarkcI 350ph Storage solution KCl 3 mol / 50 ml 85,004vtarkcl 250ph Storage solution KCl 3 mol / 250 ml 247,004vtarkcl 310ph Storage solution KCl 3 mol / 1 l 502,004vtiszold 25ph Cleaning solution / 250 ml 247,00DO probes4x085g0022ydo 085G0027 DO 10 ppm 2 000,004x085g0023ydo 085G0030 DO 20 ppm 2 830,00* Horizontally mountable115

ANALYTICSNOTESANALYTICS116

FLOW MEASUREMENTGENERAL DESCRIPTIONOPEN CHANNEL FLOW MEASUREMENTNIVOSONARNIVELCO’s open channel flow metering system offers9 different sizes, compact types of PARSHALL flumesmade of plastic (PP). The flume together withEasyTREK ultrasonic level transmitter and MultiCONTprocess controller is able to create a complete flowmeasurementsystem.The NIVOSONAR GPA enables flow measurements ongravitational sewers, brook channels, irrigationchannels or any other open channel with the help ofa PARSHALL flume.9 different sizes, compact types ofPARSHALL flumes made of plastic (PP)Factory calibrated dimensionsRange: 0.28 l/s to 1850 l/sLevel transmitter to be orderedseparately: EasyTREK or EchoTREK4-20 mA, HART communicationFor open channels, treated effluentsewage measurementsCertification of measurementpage 119FLOW MEASUREMENT117

FLOW MEASUREMENTFLOW MEASUREMENT118

FLOW MEASUREMENTOPEN CHANNEL FLOW MEASUREMENTNIVOSONARGENERAL DESCRIPTIONThe NIVOSONAR GPA enables flow measurements on gravitational sewers, brook channels, irrigation channels or any other open channel with the help of a PARSHALL flume. Theflume with EasyTREK integrated ultrasonic transmitter and MultiCONT process controller is able to create a complete flow-measurement system. The measuring flume is easy toinstall in new or existing channel structures.The PARSHALL flume is a rigid structure, manufactured out of polypropylene with narrow tolerances to ensure high accuracy of metering, therefore during transport and installationgreat care should be taken to prevent the flume from getting deformed.APPLICATIONWith the PARSHALL flume applied as a reducing element, the stagnation pressure causes the liquid level to rise. This change in level is in proportion with the velocity of the liquid andthe flow rate. EasyTREK ultrasonic level transmitter measures the change in level and transmits measurement data via HART communication to the MultiCONT multichannel processcontroller. EasyTREK transmitters can be remote programmed via HART by MultiCONT and data logging can be also realized besides displaying or transmitting measurement dataon RS 485 line into PC.MAIN FEATURES9 different sizes, compact typesof PARSHALL flumes made ofplastic (PP)Reliable measurement withultrasonic level transmitterLevel transmitter can be usedfor all flume typesDisplaying of flow measurementand average or total flowFLOW MEASUREMENTAPPLICATIONSFor open channels, gravitationalchannelsMeasurement of feed orprocess waterYield measurement of irrigationcanalsTreated sewageeffluent measurementTECHNICAL DATATYPENIVOSONAR GPAP1 P2 P3 P4 P5 P6 P7 P8 P9Q min m 3 /h 0.94 1.88 2.8 5.5 8.1 10.5 15.8 20.8 31.3Q max m 3 /h 22.3 54.4 196 604 1324 2152 3232 4359 6627W cm 2.54 5.08 7.62 15.24 22.86 30.48 45.7 61 91.4B cm 30 34 39 53 75 120 130 135 150C cm 9.29 13.49 17.8 39.4 38.1 61 76.2 91.44 121.9D cm 16.75 21.35 25.88 39.69 57.47 84.46 102.6 120.7 157.2E cm 23 26.4 46.7 62 80 92.5 92.5 92.5 92.5L cm 63.5 77.5 91.5 152.4 162.6 286.7 294.3 301.9 316.9O cm 5 5 5 10 10 10 10 10 10U cm 24.8 28.6 49.2 69.6 87.6 100.1 100.1 100.1 100.1V cm 30.7 35.35 39.9 54 80 100 120 140 180m kg 9 10.6 19.1 49 81 146 183 231 252a 0.0609 0.1197 0.1784 0.354 0.521 0.675 1.015 1.368 2.081b 1.552 1.553 1.555 1.558 1.558 1.556 1.560 1.564 1.569Q=a·h b [m 3 /s], where h= the measured level in meters119

FLOW MEASUREMENTOPEN CHANNEL FLOW MEASUREMENTNIVOSONARNIVOSONAR GPAParshall flume for open channel flow metering through level measurementWelded construction of PP-sheetsTypeGPA 1PMeasuring rangeGPA 1P1 Q min = 0.94 m 3 /h, Q max = 22.3 m 3 /h Prices on2 Q min = 1.88 m 3 /h, Q max = 54.4 m 3 /h request3 Q min = 2.8 m 3 /h, Q max = 196 m 3 /h4 Q min = 5.5 m 3 /h, Q max = 604 m 3 /h5 Q min = 8.1 m 3 /h, Q max = 1324 m 3 /h6 Q min = 10.5 m 3 /h, Q max = 2152 m 3 /h7 Q min = 15.8 m 3 /h, Q max = 3232 m 3 /h8 Q min = 20.8 m 3 /h, Q max = 4359 m 3 /h9 Q min = 31.3 m 3 /h, Q max = 6627 m 3 /hGPA 1PNIVOSONAR GPAFLOW MEASUREMENT120

TEMPERATURE MEASUREMENTGENERAL DESCRIPTIONThe most frequently measured physical parameter inthe modern process automation industry is thetemperature. NIVELCO’s THERMOCONT product rangeis designed specially for the purpose of measuringthis important parameter. The product line starts witha simple Pt100 temperature sensor and ends withhigh temperature version transmitters with Ex dflameproof housing and HART communication.Number of the order code variations and specialtypes is very high, so NIVELCO is able to providesuitable solution for most applications from the widerange of THERMOCONT instruments.The THERMOCONT product family can be divided intotwo major parts considering the output possibilities.THERMOCONT T temperature sensorsTHERMOCONT TT temperature transmittersThe THERMOCONT T types are the following:THERMOCONT TGP - Bearing temperature sensorTHERMOCONT TFP - Pt100 temperature sensorTHERMOCONT TSP - Standard temperature sensorTHERMOCONT TNP - Heavy duty temperaturesensorTHERMOCONT TXP - Temperature sensor for gasesThe THERMOCONT TT transmitters have 4-20mAoutput and as an option these devices are digitalHART communication capable. The temperaturesensors have a robust outer protection tube whichcan PFA coated. The max. medium temperature ofthese instruments is 600°C.MULTIPOINT TRANSMITTERSTHERMOPOINTTEMPERATURE TRANSMITTERSTHERMOCONT TTTEMPERATURE SENSORSTHERMOCONT T2-wire multipointtemperature transmitterTemperature measurement of powdered,granular solids or liquidsMax. 15 sensors / probeMax. 30 m probe lengthTemperature trend monitoring-40°C…+125°C rangeHART communicationExplosion-proof modelspage 123-50°C… +600°C rangePlug-in display module4-20 mA, HART communicationIntegral A or B class Pt 100 probeProbe length up to 3 mStainless steel or PFA coated probesHeavy duty field mountable housingMultiple head positionsExplosion-proof modelspage 128-50°C … +600°C rangeResistance Temperature DetectorsA or B accuracy class2- or 4-wire typesFast response sensor versionProbe length up to 3 mStainless steel or PFA coated probesVibration-resistant versionTemperature sensors for gasesExplosion-proof modelsTEMPERATURE MEASUREMENTpage 131121

TEMPERATURE MEASUREMENTTEMPERATURE MEASUREMENT122

TEMPERATURE MEASUREMENTMULTIPOINT TEMPERATURE TRANSMITTERSTHERMOPOINTGENERAL DESCRIPTIONTHERMOPOINT two-wire temperature transmitters are suitable for continuous multipoint temperature-measurement, -indication and -transmission of normal andhazardous liquids, powders or granular solids. Temperature of grain, feed stored in silos needs to be monitored for maintaining quality of the stored medium.Monitoring of the total volume of the silo is needed to provide information on accidental quality loss or appearance of germs or fungus. Eventual temperatureincreases will alert the operator to perform operation or recycling the medium. Temperature measurement is done by electronic temperature sensors placed at equaldistances in a plastic coated stainless steel flexible tube. Each sensor sends the actual measured temperature of its environment to the transmitter head. The 2-wireloop-operated transmitter head communicates through HART protocol with control room devices such as a MultiCONT or a PC, for further processing or datalogging.A solient advantage of the MultiCONT based system is that, if level measurement is required the system can be extended with a level transmitter. The advantageof using a multifunction system is that a new transmitter can easily be inserted into the existing loop, using the existing HART communication.MAIN FEATURES2-wire multipointtemperature transmitterCommunicates with HARTMax. 30 m probe lengthMax. 15 sensorsMax 35 kN tensile forceReplaceable sensorsDigitally addressed sensors-40°C…+125°C medium temperatureIP 67 protectionEx versionsAPPLICATIONSFor normal andhazardous materialsTemperature measurementof powdered, granular orfree flowing solidsFor transmitting temperature datafrom faraway locationsGrain industryFeed industryFood industryCERTIFICATIONSATEX II 1G Ex ia IIB T6…T4ATEX II 1D Ex iaD A20/A21T85°C IP67ATEX II 1D Ex ta/tb IIICT85°C Da IP67SYSTEM SET-UP VARIATIONSDepending on the required processing the system set up can be the following:1. Information transmitted by the cable via HART communication are receivedby MultiCONT and re-transmitted to a PC via RS485 protocol. Relays of MultiCONT can serve alarm functions.2. Same as above but a MultiCONT with Datalogger function stores the incoming data in an SD card. The stored data can be processed or archived in any PC.3. HART signals are directly transferred to a PC using an UNICOMM HART-USB modem. Data processing can be done by NIVELCO's NIVISION software.If more than 15 transmitters are needed they have to be redistributed between multiple MultiCONT or HART modem units.A MULTIFUNCTION SYSTEMtemperature sensorsTEMPERATURE MEASUREMENTIf level measurement is needed the appropriate level transmitter (for example: MicroTREKor EchoTREK) can be connected to the same HART loop. Because of the limitations of theHART standard, the total number of temperature and level transmitters should not exceed 15.Variants of the combined system set up are the same as described earlier.1 st silo cell 5 th silo cellmax.15 x 15 = 225 pcs. temperature sensors123

TEMPERATURE MEASUREMENTMULTIPOINT TEMPERATURE TRANSMITTERSTHERMOPOINTTECHNICAL DATATEMPERATURE MEASUREMENTFor liquidsFor solidsTypeFlexible Plastic coatedRigid Probe versionFlexible Probe versionProbe versionInsertion length 0.5 m … 4 m 2 m … 30 m 5 m … 30 mNumber of temperature sensors Max. 15Position of sensors*up to10 m: 1 sensor at every one meter, between11 and 30 m: 1 sensor at every two meters from the bottom positioned sensorTemperature range –40 °C ... +125 °C –10 °C ... +85 °CMax. medium pressure 2.5 MPa (25 bar) 1.6 MPa (16 bar) 0.3 MPa (3 bar)Resolution (digital) 0.1 °CAccuracy ± 0.5 °CMeasurement cyclemax. (Nx1) sec, where N is the number of sensorsProbeTensile force – 35 kNDimension Ø 12 mm Ø 16 mm Ø 16 mm + 1 mm coatingMaterial of wetted parts Stainless steel: DIN 1.4571Stainless steel: DIN 1.4571+ Antistatic PPAmbient temperature With plastic housing: –20 ºC…+65 ºC; with metal housing: –30 ºC…+65 ºC; with SAP-300 display: –20 ºC…+65 ºCOutputDigitalHART communicationDisplaySAP-300 LCDOutput loadR t = (U t -12.5V) / 0.004 APower supplyElectrical protectionSPECIAL DATA FOR Ex CERTIFIED MODELSStandard version:12V….36 V DC, Ex version: 12.5 V … 30 V DCProtection type ia ia D tDEx marking II1G Ex ia IIB T6..T4 II 1 D Ex iaD A20/A21 T85°C IP67 II 1 D Ex ta/tb IIIC T85°C Da IP67Class III.Ingress protection IP 67Process connectionAs per order codesElectrical connection M 20 x1.5 cable gland, cable outer diameter: Ø 6 …Ø12 mm, wire cross section: max.1.5 mm 2Housing materialPaint coated aluminium cast or plastic (PBT)Mass 1.7 kg + probe: 0.6 kg/m 2.9 kg + probe cable: 0.3 kg/m + weight 3 kg 2.9 kg + probe cable: 0.7 kg/mEx electrical limit data Uimax = 30 V Iimax = 80 mA, Pimax = 0.8 W Ci < 30 nF Li < 100 μH Umax = 30 VElectrical connection M 20 x 1.5 cable gland, cable outer diameter 7…13mm , wire cross section: 0.5…1.5 mm 2Ambient temperatureWith display: -20°C ... +65°C, Without display: see temperature limit data tableWith display: -20°C ... +65°CWithout display andwith steel housing: -30°C ... +65°CTEMPERATURE LIMIT DATA IN CASE OFEx ia AND iaD MODELSMetal housing with flexible probeTemperature class T6 T5 T4Medium temperature -40 °C … +80 °C -40 °C … +95 °C -40 °C … +125 °CAmbient temperature -30 °C … +65 °CPlastic housing with flexible probeTemperature class T6 T5 T4Medium temperature -40 °C … +80 °C -40 °C … +95 °C -40 °C … +80 °CAmbient temperature -20 °C … +65 °CMetal housing with plastic coated flexible probeTemperature class T6 T5Medium temperature -10 °C … +80 °C -10 °C … +85 °CAmbient temperature -30 °C … +65 °C124

TEMPERATURE MEASUREMENTMULTIPOINT TEMPERATURE TRANSMITTERS FOR LIQUIDSTHERMOPOINTTHERMOPOINT TM2-wire multipoint temperature transmitterFlexible cable version for liquidsMaximum cable length: 30 mAll wetted parts: stainless steelMaximum number of temperature sensors/transmitter: 15Paint coated aluminium housingPower supply: 12-36 V DCOutput: HARTEx marking: ATEX x II 1 G Ex ia IIB T6-T4HART communication via HART modem and NIVISION software or MultiCONT controllerTypeBase price in HRKTXX XXX X 3 660,00VersionAdd on prices in HRKT X XXX XM Multipoint transmitter 0,00J Multipoint transmitter with local LCD indicator 544,00Process connectionAdd on prices in HRKTX XXX XK 1 1/2" BSP 0,00E 1 1/2" NPT 0,00THERMOPOINT TMK-500HousingAdd on prices in HRKTXX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced 0,00Number of sensorsAdd on prices in HRKTXX X X X1 - 9 1-9; each sensor 85,00A - F 10-15; each sensor 85,00Cable lengthAdd on prices in HRKTXX XX X2 - 9 2-9 m; each started 1 m 306,00A - Z 10-30 m; each started 1 m 306,00Output / ApprovalTXX XXXAdd on prices in HRK4 HART 0,006 HART / Ex ia 262,00TEMPERATURE MEASUREMENTT Accessories to orderTypePrice in HRKS A P 3 0 0 Plug-in display module (See "Electronic accessories") 544,00TMK-555-4M-200-01 St. St. Counterweight, Ø 42x77 mm 392,00SAS 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00SAT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00125

TEMPERATURE MEASUREMENTMULTIPOINT TEMPERATURE TRANSMITTERS FOR LIQUIDSTHERMOPOINTTHERMOPOINT TM2-wire multipoint temperature transmitterRigid probe version for liquidsProbe length: max. 3 mAll wetted parts: stainless steelMaximum number of temperature sensors/transmitter: 15Housing: paint coated aluminium or plastic (PBT glass fibre reinforced)Power supply: 12-36 V DCOutput: HARTEx marking: ATEX x II 1 G Ex ia IIB T6-T4HART communication via HART modem and NIVISION software or MultiCONT controllerTypeBase price in HRKTXX XXX X 2 640,00VersionAdd on prices in HRKT X XXX XM Multipoint transmitter 0,00J Multipoint transmitter with local LCD indicator 544,00Process connectionAdd on prices in HRKTX XXX XR 1" BSP 0,00A 1" NPT 0,00J M20x1.5 0,00THERMOPOINT TMR-500HousingAdd on prices in HRKTXX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT, glass fibre reinforced 0,00TEMPERATURE MEASUREMENTNumber of sensors*Add on prices in HRKTXX X X X1 - 9 1-9; each sensor 85,00A - F 10-15; each sensor 85,00Probe length**Add on prices in HRKTXX XX X1 - 4 1-4 m; each started 1 m 153,00Output / ApprovalTXX XXXAdd on prices in HRK4 HART 0,006 HART / Ex ia 262,00T * Number of temperature sensors is depending on the insertion length** Special probe length is available on requestAccessories to orderTypePrice in HRKS A P 3 0 0 Plug-in display module (See "Electronic accessories") 544,00SAS 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00SAT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00126

TEMPERATURE MEASUREMENTMULTIPOINT TEMPERATURE TRANSMITTERS FOR SOLIDSTHERMOPOINTTHERMOPOINT TM2-wire multipoint temperature transmitterPE coated antistatic cableMaximum cable length: 30 mMaximum allowed tensile force: 3.5 tMaximum number of temperature sensors/transmitter: 15Paint coated aluminium or plastic housingPower supply: 12-36 V DCOutput: HARTEx marking: ATEX x II 1 G Ex ia IIB T6-T4 orATEX x II 1 D Ex ta/tb IIIC T85°C Da IP67 orATEX x II 1 D Ex iaD A20/A21 IP67 T85°CHART communication via HART modem and NIVISION software or MultiCONT controllerTypeBase price in HRKTXX XXX X 4 420,00VersionAdd on prices in HRKT X XXX XM Multipoint transmitter 0,00J Multipoint transmitter with local LCD indicator 544,00Process connectionAdd on prices in HRKTX XXX XH 1 1/2" BSP 0,00C 1 1/2" NPT 0,00THERMOPOINT TMH-500HousingAdd on prices in HRKTXX XX X5 Aluminium (paint coated) 0,00Number of sensorsAdd on prices in HRKTXX X X X1 - 9 1-9; each sensor 85,00A - F 10-15; each sensor 85,00Cable lengthAdd on prices in HRKTXX XX X2 - 9 2-9 m; each started 1 m 68,00A - Z 10-30 m; each started 1 m 68,00Output / ApprovalAdd on prices in HRKTXX XXX5 HART / Ex iaD 0,006 HART / Ex ia 0,008 HART / Ex tD 0,00TEMPERATURE MEASUREMENTT Accessories to orderTypePrice in HRKS A P 3 0 0 Plug-in display module (See "Electronic accessories") 544,00CTN-103-0M-400-00 St. St. Counterweight, Ø 76x150 mm 616,00SAS 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00SAT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00127

TEMPERATURE MEASUREMENTTEMPERATURE TRANSMITTERSTHERMOCONT TTGENERAL DESCRIPTIONTHERMOCONT TT field devices incorporating Pt100 sensor are 2-wire temperature transmitter with 4 … 20 mA analogue output or transmitter/indicator if equipped with plugin display. Intrinsically safe version of each model is available in ordinary or flame-proof housing. The measured temperature can also be transmitted by HART communication.The THERMOCONT TT temperature transmitters are suitable for temperature measurement of liquids in tanks and pipes and free flowing or powdered solids, but also applicablefor gases. Wall mounted versions are available for ambient temperature measurements. The PFA coated stainless steel probe makes measurement of very aggressive materialsalso possible. The reinforced temperature probe version is an ideal solution for meeting the requirements of the oil-, gas- and heavy chemical industries, but also a good choicewhen robustness of the probe is advantageous. As special version of the unit a remote transmitter is also available which can be connected to a standard Pt 100 sensor througha simple 4-wire cable.MAIN FEATURESTemperature transmitting and displayingMeasurement range:from -50 °C up to +600 °C4 … 20 mA outputHART communicationVariety of head positionsStainless steel probePlastic coated versionFlameproof casingStrengthened probe versionEx versionsIP 65 protectionTEMPERATURE MEASUREMENTAPPLICATIONSFor normal and hazardous mediumsFor temperature metering ofliquids, vapours, gasesTemperature transmittingfor far distancesTemperature metering intanks, tubes, furnaces or boilersTemperature metering ofhalls or roomsTBJ-500TBW-600TBJ-500TVS-500strengthenedprobeversionCERTIFICATIONSPOSITION OF THE DISPLAYATEXATEXATEXII 1G EEx ia IIB T6…T1II 2G EEx d IIB T6…T1II 1/2G EEx d ia IIB T6…T1”A” ” is the default head position”C””B””D”SAP-202 displayRequested head position differing from standard (”A”) version should be specified when placing an order128

TEMPERATURE MEASUREMENTTEMPERATURE TRANSMITTERSTHERMOCONT TTTECHNICAL DATATypeStandardHigh temperatureversionPlastic coatedversionStrenghtened probeversionMeasurement range -50 °C … +200 °C -50 °C … +600 °C (3) -40 °C … +70 °C -50 °C … +600 °C (3)Insertion length As per order code, max. 3000 mm Max. 800 mmProcess connection As per order code ½” NPT / 1” NPT threadedMaximum process pressure 2.5 MPa (25 bar) at +20 °C, 1.6 MPa (16 bar) at +400 °C 4 MPa (40 bar)Material of wetted parts (2) stainless steel DIN 1.4571stainless steel DIN 1.4571+ PFA / PFTEstainless steelDIN 1.4571ProbeAccuracy (1)Power supplyOutputOutputcurrentDisplayedcurrentAnalogueClass A or Class B Pt100 temperature sensor, as per order codeClass „A” Pt 100 ± (0.3+ |0.0025 t | ) °C ± (1.5+ |0.004 t | ) °C ± (0.3+ |0.0025 t | ) °CClass „B” Pt 100 ± (0.4+ |0.0055 t | ) °C ± (1.5+ |0.006 t | ) °C ± (0.4+ |0.0055 t | ) °CTemperature error ± 0.02°C / °CClass „A” Pt 100 ± (0.2+ |0.0025 t | ) °C ± (1.5+ |0.004 t | ) °C ± (0.2+ |0.0025 t | ) °CClass „B” Pt 100 ± (0.35+ |0.0055 t | ) °C ± (1.5+ |0.006 t | ) °C ± (0.35+ |0.0055 t | ) °CTemperature errorDigital communicationOutput loadDisplayError indicationAmbient temperatureElectrical protectiontype± 0.02°C /°C10 V … 36 V DC; Ex: 12 V - 30 V DC, see: special data for Ex certified models44…20 mA, output limit values: 3.9 mA … 20.5 mAHARTRt = (Us-10V) / 0.022 A, Us = power supply voltageSAP-202resolution 0.1 °C 0.4 °C 0.1 °C3.8 mA or 22 mA-40 °C ... +70 °C, with display: -25 °C ... +70 °C; see: special data for Ex certified modelsClass III.Ingress protection IP 65Electrical connectionHousing materialMasswith aluminiumhousingwith plastichousingPlastic or steel cable gland: M20 x 1.5;Cable outer diameter: Ø 6...12 mm;Wire cross section: 0.25...1.5 mm 2Paint coated aluminiumPaint coated aluminiumor plastic (PBT)~ 0.5kg + probe 0.5kg/m(for T W…. types~ 0.5kg total)~ 0.9kg + probe 0.5kg/m (for T W …. types ~ 0.9kg total)-/ see: special data for Ex certified modelsPaint coated aluminiumor plastic (PBT)~ 0.5kg + probe 0.5kg/m(for T W…. types~ 0.5kg total)Paint coated aluminium~1.55kg + probe0.25kg / 100 mm-TEMPERATURE MEASUREMENT(1)t = measured temperature(2)Not valid for T W types(3)with heatsink above 200 °CSPECIAL DATA FOR EX CERTIFIED MODELSProtection typeIntrinsically safeStrenghtenedprobe versionFlameproof casingIntrinsically safe withflameproof casingEx marking II 1 G EEx ia IIB T6…T1 II 2 G EEx d IIB T6…T1 II 1/2 G EEx d ia IIB T6…T1Intrinsically safedataU max = 30 V, I max = 140 mA, P max = 1.0 WCi 20 nF, Li 200 μH–U max = 30 V, I max = 140 mA,P max = 1.0 W,C i 20 nF, L i 200 μHAmbienttemperatureCablegland-40 °C ... +70 °C,with display: -25 °C ... +70 °CSteel, M 20 x1.5cable outer diameter: 6…12 mm-40 °C ... +70 °C,with display: -20 °C ... +70 °CSteel, M 20 x1.5cable outer diameter: 9…11 mmTemperature classes T6 T5 T4 T3 T2 T1Ambient temperature +60 °C +70 °CMedium temperature +80 °C +95 °C +130 °C +195 °C +295 °C +440 °C129

TEMPERATURE MEASUREMENTTEMPERATURE TRANSMITTERSTHERMOCONT TTTEMPERATURE MEASUREMENTTHERMOCONT T2-wire temperature indicator / transmitterAll wetted parts: stainless steelHousing: Aluminium or plastic with IP65 / NEMA 4Output: 4-20 mA, HARTPower supply: 12-30 V DCEx marking: ATEX x II 1 G EEx ia IIB T6…T1 orATEX x II 2 G EEx d IIB T6…T1 orATEX x II 1/2 G EEx d ia IIB T6…T1Position A,B,C,D must be specified according to the figureTypeBase price in HRKTXX XXX X 1 960,00VersionAdd on prices in HRKT X XXX XT Transmitter, up to 200°C 0,00V Transmitter, up to 600°C 187,00W Transmitter, up to 200°C , PFA coated 374,00B Transmitter with local LCD indicator, up to 200°C 439,00L Transmitter with local LCD indicator, up to 600°C 626,00R Transmitter with local LCD indicator, up to 200°C, PFA coated 823,00Process connection*Add on prices in HRKTX XXX XW With console for wall mounting 0,00C 1/2" BSP 0,00D 3/4" BSP 0,00H 1/2" NPT 0,00J M20x1,5 0,00L 1" Triclamp 299,00K 1 1/2" Triclamp 374,00N 2" Triclamp 449,00O DN 25 Pipe coupling (DIN 11851) 299,00P DN 40 Pipe coupling (DIN 11851) 374,00R DN 50 Pipe coupling (DIN 11851) 449,00F DN 50, PN 16, DIN flange, 1.4571+PTFE lining 1310,00A 2" ANSI, 1.4571+PTFE lining 1310,00HousingAdd on prices in HRKTXX XX X5 Aluminium (paint coated) 140,006 Plastic, PBT glass fibre reinforced (Ex version not available) 0,00SensorAdd on prices in HRKTXX X X X0 Without (Ex type only for EExia) -374,001 Pt100, class A 165,002 Pt100, class B 0,00Probe lengthAdd on prices in HRKTXX XX X0 60 mm 0,001 160 mm 0,002 250 mm 22,103 400 mm 45,104 500 mm 65,505 1000 mm 168,006 1500 mm 271,007 2000 mm 374,008 2500 mm 477,009 3000 mm 580,00Output / ApprovalAdd on prices in HRKTXX XXX2 4-20 mA / none 0,004 4-20 mA + HART / none 688,006 4-20 mA / EExia 748,008 4-20 mA + HART / EExia 1440,00A 4-20 mA / EExd 1120,00B 4-20 mA + HART / EExd 1810,00C 4-20 mA / EExd ia 1870,00D 4-20 mA + HART / EExd ia 2560,00THERMOCONT TTJ-521THERMOCONT TVJ-500THERMOCONT TTJ-500 ExTHERMOCONT TTS-500*Requested head position differing from standard („A”)version should be specified when placing an order!T Accessories to orderTypePrice in HRKSAP 2 0 2 Plug-in display module (See "Electronic accessories") 439,00SAS 3 0 3 EView 2 software package (See "Electronic accessories") 5140,00SAT 3 0 4 HART-USB modem (See "Electronic accessories") 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00* Price on request for the TTZ and TTS strengthened probeversions130

TEMPERATURE MEASUREMENTTHERMOWELLS, TEMPERATURE SENSORSTHERMOCONT TGENERAL DESCRIPTIONThe wide range of THERMOCONT temperature sensors is able to cover almost all demands in the area of industrial temperature measurement. The numerous versions and multiplekinds of applicable probes make THERMOCONT suitable choice for all industries. PFA coated probe versions with teflon inserted steel flange are applicable for chemical andpetrochemical applications where aggressive mediums could damage steel probes. The vibration-resistant versions are suitable for special applications where the measurement isexposed to high vibrations. The strengthened probe versions are designed primarily for oil, gas and steam pipeline industrial applications. The shock proof stainless steel constructionincludes the inner and outer (double) tube and well, the welded flange. This type is also provides suitable solution for all applications where robust design is advantageous.Suiting for unique technologies and industrial processes, special versions are also available along with the standard models.MAIN FEATURESThermocouples and RTDs(Resistance Temperature Detectors)Temperature range from -50 °C up to +600 °CMultiple kinds of thermo-sensorsStainless steel probesFast response sensor versionPlastic coated versionVibration-resistant versionHeavy-duty robust versionEx versionsIP 65 protectionTNstrengthened probeversion thermowelltemperature sensorAPPLICATIONSTemperature metering in tanks, tubes, furnaces or boilersCan be mounted to special technological placesFor temperature metering of liquids, vapours, gasesTemperature metering in bearingsSpecial versions for unique applicationsTSPstandardtemperature sensorCERTIFICATIONSATEX II 2G EEx d IIC T6…T1, 600 °CATEX II 1/2G EEx d ia IIC T6…T1, 600 °CATEX II 1G EEx ia IIC T6…T1, 600 °CTEMPERATURE MEASUREMENTTGPbearingtemperature sensorTFPtemperature sensorTPPplastic coated Ex versiontemperature sensorTXPtemperature sensorfor gases131

TEMPERATURE MEASUREMENTTHERMOWELLS, TEMPERATURE SENSORSTHERMOCONT TTECHNICAL DATAFeaturesSensorHeadOuterprotectionTypeTHERMOCONT temperature sensorsNormal Vibration-resistant Fast response Plastic coated Strenghtened probe For gasesAccuracy class A or B accuracy class in accordance to EN 60751 A classTypeSingle or dualOnly withsingle sensorSingle or dualVibration resistance – EN 60751.4.4.2 – EN 60751.4.4.2GroundingGround-independentMaterial of inner protecting tube A38 DIN 1.4571 PTFEHousing material EN 573-3 (DIN 1712) Aluminium Paint coated EN AC 43100Cable gland M 20 x 1.5 plastic M 20 x 1.5 metalCable Ø 7 – 10 mm, see: special data for Ex certified models table Ø7.5 - 12 mmElectrical connectionScrew type terminalMaterial DIN 1.4571 stainless steel PFA coating DIN 1.4571Probe length 160 – 3000 mm 160 – 1000 mm 120 – 500 mmProcess connection As per order codes M33x2 1"NPTRange -50 °C … +600 °C -50 °C … +200 °C -50 °C … +600 °C -50 °C … +150 °CTEMPERATURE MEASUREMENTGeneral data(1)In the standard temperature ranges (about up to 400 °C) the temperature error of „A” temperature class resistance temperature sensors is below ±1 °C, while it ismax. ±2.3 °C in case of „B” temperature class temperature sensors.FeaturesTypeTHERMOCONT Tbearing temperature sensorsTHERMOCONT Ttemperature sensorsOperating temperature –50 °C…+180 °C –30 °C…+200 °CSenzorPt100Sensor diameter Ø 8 mm Ø 6, Ø 8 mmAccuracy class A or B accuracy class in accordance to EN 60751Measuring current 1 mA max. 5 mAMaterial of sensor tubeMechanical connectionElectrical connectionCable protectionStainless steel,DIN 1.4571 / Cu protector coverAs per order codesDIN 1.4571SIT type silicone rubberTeflon coated, 0.25 mm 2and shield, 3x0.75 mm 2 wire cross section cabletinned copper-braid protective jacketCable length 6 m, diameter: 7 mm max. 3 m, as per order codesInsertion lengthAs per order codesIngress protection IP 65 IP 40Electrical protectionInsulation resistivityVoltage-testmin. 10 M, at 20 °C ±5 °Cmin. 1 M at the highest valueoperating temperature500 V, 50 Hz ACfor 1 min., at 20 °C ±5 °CClass III.Mass 0.55 kg 0.05 kgTime constantPressureMedium pressuremax. 6 MPa2.5 MPa (25 bar) at 20 °C1.6 MPa (16 bar) at 400 °C< 20 mp0.1 Mpa (1 bar)1"NPT- 4MPa (40bar) orpressure rating of flangesTime-constant < 3 min. < 20 sec. 4.5 min. –Max. 8MPa(80 bar)Ambient temperature –20 °C…+80 °C see: special data for Ex certified models table -40 °C … 80 °C -30 °C … +80 °CGroundingElectrical protectionOuter, grounding screw on the housingClass III.Ingress protection IP 65Ex marking – see: special data table – see: special data for Ex certified models tableSPECIAL DATA FOR Ex CERTIFIED MODELSTemperature sensorsII 2 G EEx d IIC T6…T1, 600 °CEx markingII 1 G EEx d ia IIC T6…T1, 600 °CII 1 G EEx ia IIC T6…T1for EEx ia cable gland: Ø 7 - 10 mmCablefor EEx d cable gland: Ø 9.5 - 10 mmfor EEx d ia cable gland: Ø 7.5 - 12 mmTemperature sensors with strenghtened probeII 2 G EEx d IIC T6…T1, 600 °CEx markingII 1/2 G EEx d ia IIC T6…T1, 600 °CII 1 G EEx ia IIC T6…T1, 600 °CCableØ 7.5 - 12 mmTemperature sensors for gasesEx markingCableII 2 G Ex d IIC T6… +150 °C GbII 1/2 G Ex d ia IIC T6… +150 °C GbØ 8 - 16 mmFor Ex ia protection typeIntrinsically safe U i = 30 V, I i = 100mA, P i 750 mWlimit dataC 0 =0 nF , L 0 =0 mHTemperature classesT6 T5 T4 T3 T2 T1 T600Ambient temperature from -20 °C+65 °C +70 °C +70 °C +80 °C +80 °C +80 °C +80 °CMedium temperature from -20 °C+85 °C +100 °C +135 °C +200 °C +300 °C +450 °C +600 °C132

TEMPERATURE MEASUREMENTTHERMOWELLS, TEMPERATURE SENSORSTHERMOCONT TTHERMOCONT TTemperature element with strengthened caseIngress protection: IP 65Housing: aluminium castingProcess connection and well: stainless steel DIN 1.4571Ex marking: ATEX x II 1G EEx ia IIC T6…T1, 600°CATEX x II 2G EEx d IIC T6…T1, 600°CATEX x II 1/2G EEx d ia IIC T6…T1, 600°CTypeBase price in HRKTXX XXX X 2 740,00Well (DIN 1.4571)Add on prices in HRKT X XXX XN Drilled, tapered 0,00U Drilled straight 0,00SensorAdd on prices in HRKTX XXX XK Thermocouple NiCr-Ni (IEC 584) 0,00P Resistance Temperature Sensor Pt100 (IEC 751) 0,00Process connection*Add on prices in HRKTXX XX X1 1" NPT 0,002 DIN DN40 PN40 [PN25] 1740,005 DIN DN50 PN40 [PN25] 1790,00F 2" ANSI 300RF 1870,00T 1 1/2" ANSI 300RF 1790,00THERMOCONT TNC: Dimension is dependig on the applied cable glandD, E: As per order codeSensor classification / ArrangementAdd on prices in HRKTXX X X XThermocouple1 Class 1, single 0,004 Class 1, dual 343,00Resistance Temperature Sensor1 Class A, single, 2-wire 0,004 Class A, dual, 3-wire 343,007 Class A, single, 4-wire 343,00Protrusion lengthAdd on prices in HRKTXX XX XTN - Drilled, tapered1 160 mm 76,503 250 mm 349,006 400 mm 714,008 500 mm 961,009 600 mm 1200,00A 700 mm 1440,00B 800 mm 1920,00C 900 mm 2410,00D 1000 mm 2890,00TU - Drilled strait1 160 mm 0,003 250 mm 230,006 400 mm 587,008 500 mm 825,009 600 mm 1070,00A 700 mm 1320,00B 800 mm 1560,00C 900 mm 1790,00D 1000 mm 2030,00TEMPERATURE MEASUREMENTEx certificateAdd on prices in HRKTXX XXX0 None 0,007 EExia 262,008 EExdia 619,009 EExd 428,00T * On request: other process connections133

TEMPERATURE MEASUREMENTTHERMOWELLS, TEMPERATURE SENSORSTHERMOCONT TTHERMOCONT TXTemperature element with strengthened case and heat stabilizerIngress protection: IP 65Housing: aluminium castingProcess connection and well: stainless steel DIN 1.4571Ex marking: ATEX x II 2G Ex d IIB T4-T6 150°C GbATEX x II 1/2G Ex d ia IIB T4-T6 150°C GbTypeBase price in HRKTXX XXX X 3 180,00SensorAdd on prices in HRKTX XXX XP Resistance Temperature Sensor Pt100 (IEC 751) 0,00Process connection*Add on prices in HRKTX X XX X1 1" NPT 0,00V M33x2 0,00TEMPERATURE MEASUREMENTSensor classification / ArrangementAdd on prices in HRKTX X X X X1 Class A, single, 2-wire 0,004 Class A, dual, 3-wire 343,007 Class A, single, 4-wire 343,00Protrusion lengthAdd on prices in HRKTX X XX X0 120 mm 0,001 160 mm 0,002 200 mm 102,003 250 mm 230,004 300 mm 357,005 350 mm 468,006 400 mm 587,007 450 mm 706,008 500 mm 825,00Ex certificateAdd on prices in HRKTX X XXX0 None 0,008 Ex dia 619,009 Exd 428,00TX THERMOCONT TXP-1_ _-_C: Dimension is dependig on the applied cable glandE: As per order code* On request: other process connectionsTHERMOCONT TXP-V_ _-_134

TEMPERATURE MEASUREMENTTHERMOWELLS, TEMPERATURE SENSORSTHERMOCONT TFResistance thermometer (RTD), Pt100 sensorProcess temperature: max. 200°CProtecting tube made of 1.4571, integrated cableTypeBase price in HRKT F P XXX X 241,00Process connectionAdd on prices in HRKT F P XX X1 Ø 6mm 1.4571 0,002 Ø 8mm 1.4571 18,703 M 12 x 1.5 208,004 M 8 x 1 178,00Pt 100 sensorAdd on prices in HRKT F P X X X1 Class A, single 165,002 Class B, single 0,004 * Class A, dual 243,005 * Class B, dual 161,006 * Class B, single, 4-wire 81,607 * Class A, single, 4-wire 165,00Probe lengthAdd on prices in HRKT F P XX X1 60 mm 0,002 100 mm 0,003 160 mm 8,504 250 mm 17,005 ** 10 mm 0,006 ** 30 mm 0,00THERMOCONT TTHERMOCONT TFP-1, TFP-2THERMOCONT TFP-3THERMOCONT TFP-4THERMOCONT TFP-5, TFP-6Cable lengthAdd on prices in HRKT F P XXX0 0,6 m 0,001 1 m 19,602 2 m 39,103 3 m 58,70T F P * only with Ø 8 mm tube diameter** only with threaded process connectionTHERMOCONT TGBearing RTD sensor, Pt 100Protecting tube made of A38, integrated cableProcess temperature: max. 180°CTEMPERATURE MEASUREMENTTypeBase price in HRKTGP XXX X 587,00Process connectionAdd on prices in HRKTGP XX X1 Rimmed 0,002 M 20 x 1,5 151,00Pt 100 sensorAdd on prices in HRKTGP X X X1 Class A Pt 100, 3-wire 165,002 Class B Pt 100, 3-wire 0,00Probe lengthAdd on prices in HRKTGP XX X1 30 mm 0,002 50 mm 0,003 100 mm 19,604 160 mm 39,105 380 mm 78,20THERMOCONT TGP-1THERMOCONT TGP-2Cable lengthAdd on prices in HRKTGP XXX3 3 m -73,104 6 m 0,00T G P 135

TEMPERATURE MEASUREMENTTHERMOWELLS, TEMPERATURE SENSORSTHERMOCONT TTHERMOCONT TSRTD temperature sensorIngress protection: IP 65With silvered output terminals, 1.4571 or PFA coated stainless steel tubeEx marking: ATEX x II 2G EExd IIC T6-T1 600°CATEX x II ½ G EExdia IIC T6-T1 600°CATEX x II 1 G EExia IIC T6-T1 600°CTypeBase price in HRKTXX XXX X 901,00VersionAdd on prices in HRKT X XXX XS 1.4571 (stainless steel) 0,00P PFA coated stainless steel (only with flange) 961,00THERMOCONT TSP, TSVSensorAdd on prices in HRKTX XXX XP Pt 100 0,00V Pt 100 shock proof 264,00G Pt 100 fast-response 204,00TEMPERATURE MEASUREMENTProcess connectionAdd on prices in HRKTXX XX X0 Flange DN 25 PN 25, 1.4571 850,001 M 20 x 1.5 0,002 1/2" BSP 0,003 1/2" NPT 0,004 3/8" BSP 0,005 Flange DN 40 PN 25/16, 1.0037 306,006 Flange DN 50 PN 25/16, 1.0037 332,007 Flange DN 80 PN 25/16, 1.0037 366,008 Flange DN 100 PN 25, 1.0037 408,009 Flange DN 150 PN 25, 1.0037 446,00Pt100 SensorAdd on prices in HRKTXX X X X1 Class A 165,002 Class B 0,004 Class A, dual 243,005 Class B, dual 161,006 Class B + 4-wire 81,607 Class A + 4-wire 247,00Probe lengthAdd on prices in HRKTXX XX X1 160 mm 0,002 250 mm 22,103 400 mm 45,104 500 mm 65,505 1000 mm 168,006 1500 mm 271,007 2000 mm 374,008 2500 mm 477,009 3000 mm 580,00THERMOCONT TPPTHERMOCONT TSPEExd, EExdiaEx ApprovalAdd on prices in HRKTXX XXX0 None 0,007 EEx ia 383,008 EEx d ia 587,009 EEx d 519,00T On special request: other process connections and probe lengths136

SENSORSGENERAL DESCRIPTIONPRESSURE TRANSMITTERSNIPRESSAnother important non-electrical quantity of theindustrial process automation is the pressure.The NIPRESS D mini compact type gauge / absolutepressure transmitters offer wide selection of modelsand provide possibility to complete almost allrelative or absolute pressure measurement tasksrequiring different accuracy.Their design, high overload capability and thepossibility to install the units in any physical positionallows for a wide range of industrial applications.The non-contact proximity switches are also verypopular devices of the industrial process automation.The MICROSONAR ultrasonic proximity sensorsprovides ideal choice for simple applications wherethe use of higher performance units such asEasyTREK or EchoTREK is not needed.The MICROSONAR proximity sensors use non-contactultrasonic principles to detect and measure theposition of an object. They act as proximity switches,or transmit the measurement of the distance fromsensor face to the target.Gauge or absolute pressure transmitters-1 - 600 bar rangePiezoresistive or ceramic sensorHigh accuracy: 0.25 %, or 0.5%Mini compact 2- or 3-wire transmittersStainless steel housingSanitary process connections4-20 mA, 0-10 V DC outputULTRASONIC PROXIMITY SENSORSMICROSONARNon-contact distance meteringNarrow 5° beam angleMax. 6 m measuring rangePosition, distance detectionLocal programmingwith magnet or cable4-20 mA, 0-10 V, PNP or NPNswitch outputShort circuit and reversepolarity protectionpage 139page 143SENSORS137

SENSORSSENSORS138

SENSORSPRESSURE TRANSMITTERSNIPRESS DGENERAL DESCRIPTIONNIPRESS pressure transmitters working in 2- or 3-wire systems convert pressure (input signal) to direct current or voltage (output signal) proportional with the pressure. The wideselection of models provides possibility to complete almost all relative or absolute pressure measurement tasks requiring different accuracy. Their design, high overload capability andthe possibility to install the units in any physical position allows for a wide range of industrial applications.NIPRESS D-200 series featuring capacitance ceramics transducer is applicable to the measurement of normal or corrosive mediums such as gases, fumes or liquids but not suggestedfor materials tending to sedimentation, crystallisation or stiffening. These units are suitable to measure overpressure as well.NIPRESS D-300 series with piezoresistive transducer and stainless steel diaphragm is also suitable to dynamic pressure changes. It is not recommended to liquids tending tosedimentation, crystallisation and solidification. Absolute pressure measurement is feasible at ranges over 0.1 bar. Transmitters are available for use in 2- or 3-wire systems withstandard 4 ... 20 mA or 0 ... 10 V DC outputs.NIPRESS D-400 series with piezoresistive or capacitive transducer behind its flush face diaphragm is especially suitable to contaminated liquids and for tanks with bottom measurementof pressure (level). The high temperature versions are able to be used up to 150 °C. Units in the pressure range of 0 ... 40 bar operate up to 300 °C. Absolute pressure measurementin the range of over 0.1 bar is possible.The standard pressure transmitting liquid of the sensors is silicone oil, but the units can also be ordered with a pressure transferring liquid suitable for food industry. Transmitters canbe applied both in 2- and 3-wire systems.All NIPRESS transmitters can be equipped with the loop powered, programmable, plug in display UNICONT PLK-501to be ordered separately.MAIN FEATURESAPPLICATIONSGauge or absolute pressure transmittersPressure range from -1 up to 400 barPiezoresistive or ceramic sensorMini compact typeStainless steel housingHigh accuracy: 0.25% or 0.5%Standard plug type connectorIP 65, IP 67 protectionTECHNICAL DATAMeasuring of gases, vapours and liquidsOverpressure and level measuring tasksMounted on tanks,pipes or pressurized vesselsNIPRESS D-200Type NIPRESS D-200 NIPRESS D-300 NIPRESS D-400NIPRESS D-300Measurement range 0 – 400 bar -1 – 600 bar -1 – 400 barOverload capabilityAs per order codesAccuracy 0.5 %P > 0.4 bar: 0.25 or 0.5% as per order codesP 0.4 bar: 0.5%Medium temperature – 25 °C ... +125 °C– 25 °C...+125 °CHigh temperature version: up to 300 °CAmbient temperature – 25°C ... +85 °CSensoring type Capacitance Piezoresistive Piezoresistive, above 40 bar: CapacitanceMaterial ofWetted partsSensorAlu. oxide ceramics Al 2 O 3(internal diaphragm)Stainless steel: DIN 1.4435(internal diaphragm)Sensor sealing FKM (Viton) FKM (Viton) P 40 bar < NBRConnectionStainless steel:DIN 1.4301Stainless steel:DIN 1.4571Stainless steel: DIN 1.4435(flush face diaphragm)Threaded: FKM (Viton) P 40 bar < NBRPipe coupling, Tri-clamp1/2" BSP or 1” BSP and P > 40 barStainless steel: DIN 1.45711" BSP connection and P 40 bar: 1.4435Housing Stainless steel: DIN 1.4301Output 4...20 mA 4...20 mA; 0...10 VPower supply8...32 V DC4...20 mA output: 12 V...36 V DC0...10 V DC output: 14 V...36 V DCSENSORSNIPRESS D-400 +UNICONT PLK-501optional displayLoad resistanceProcess connectionR t U 1 –8V 0.02A2-wire current output: R t U 1 –8V 0.02A3-wire voltage output: R t > 10 kAs per order codesElectrical connection Pg 9 DIN 43650 Pg 9 DIN 43650 connector (1)Electrical protectionClass III.Ingress protection IP 65 IP 65 / IP 67 (integrated cable version)Mass ~ 0.14 kg ~ 0.5 kg(1) Integrated cable version is available on special order139

SENSORSPRESSURE TRANSMITTERSNIPRESS DNIPRESS D-2002-wire pressure transmitter for gauge pressure measurementOutput: 4-20 mAPower supply: 8-32 VDCAccuracy: 0,5% FSOHousing/Process connection: stainless steel DIN 1.4301Diaphragm: ceramic Al2O3Sealing: FKMElectrical connection: DIN 43650TypeBase price in HRKDRX 2XX 2 1 170,00NIPRESS D-200Process connectionAdd on prices in HRKDR 2XX 2A 1/4” BSP according to EN837 (manometer) 88,40C 1/2” BSP according to EN837 (manometer) 0,00Range / OverpressureAdd on prices in HRKDRX 2 X 25 0-1 bar / 3 bar 0,006 0-1.6 bar / 4 bar 0,007 0-2.5 bar / 4 bar 0,008 0-4 bar / 10 bar 0,009 0-6 bar / 10 bar 0,00A 0-10 bar / 20 bar 0,00B 0-16 bar / 40 bar 0,00C 0-25 bar / 40 bar 0,00D 0-40 bar / 100 bar 287,00E 0-60 bar / 100 bar 287,00F 0-100 bar / 200 bar 287,00G 0-160 bar / 400 bar 287,00H 0-250 bar / 400 bar 287,00J 0-400 bar / 650 bar 287,001/2” BSP EN837AccuracyAdd on prices in HRKDRX 2X 22 0.5% 0,00DR 2 2SENSORSAccessories to orderTypePrice in HRKP L K 5 0 1 2 Plug-in indicator 1570,00P L K 5 0 1 3 Plug-in indicator with PNP output 1750,00UNICONT PLK-501140

SENSORSPRESSURE TRANSMITTERSNIPRESS DNIPRESS D-3002- or 3-wire pressure transmitter for absolute and gauge pressure measurement, with internal membraneOutput: 4-20 mA or 0-10 VPower supply: 12-36 V DCAccuracy: 0.25% or 0.5% FSO (p 0.4 bar: 0.5%)Housing: stainless steel DIN 1.4301Process connection: stainless steel DIN 1.4571Sensor: stainless steel DIN 1.4435 with recessed diaphragmSealing: FKM 40 bar < NBRElectrical connection: DIN 43650TypeBase price in HRKDXX 3 XX X 2 190,00NIPRESS D-300Measuring methodAdd on prices in HRKD X 3 XX XR Gauge 0,00E Absolute (above 0.1 bar only) 309,00Process connectionAdd on prices in HRKDX 3 XX XA 1/4” BSP 88,40C 1/2” BSP 0,00G 1/4” NPT 88,40H 1/2” NPT 0,00Range / OverpressureAdd on prices in HRKDXX 3 X X0 -1-0 bar / 3 bar 155,001 0-0.1 bar / 0,5 bar 287,002 0-0.25 bar / 1 bar 353,003 0-0.4 bar / 1 bar 353,004 0-0.6 bar / 3 bar 155,005 0-1 bar / 3 bar 0,006 0-1.6 bar / 6 bar 0,007 0-2.5 bar / 6 bar 0,008 0-4 bar / 20 bar 0,009 0-6 bar / 20 bar 0,00A 0-10 bar / 20 bar 0,00B 0-16 bar / 60 bar 0,00C 0-25 bar / 100 bar 0,00D 0-40 bar / 100 bar 0,00E 0-60 bar / 140 bar 0,00F 0-100 bar / 340 bar 0,00G 0-160 bar / 340 bar 0,00H 0-250 bar / 600 bar 0,00J 0-400 bar / 600 bar 0,00K 0-600 bar / 1000 bar 0,00AccuracyAdd on prices in HRKDXX 3 X X1 0.25% (p > 0.4 bar) 386,002 0.5% 0,00SENSORSOutputAdd on prices in HRKDXX 3 XX2 4-20 mA 0,003 0-10 V 111,00D 3 Accessories to orderTypePrice in HRKP L K 5 0 1 2* Plug-in indicator 1570,00P L K 5 0 1 3* Plug-in indicator with PNP output 1750,00* only for 2-wire versionUNICONT PLK-501141

SENSORSPRESSURE TRANSMITTERSNIPRESS DNIPRESS D-4002- or 3-wire pressure transmitter for absolute and gauge pressure measurementOutput: 4-20 mA or 0-10 VPower supply: 12-36 VDCAccuracy: 0.25% or 0.5% FSO (p 0.4 bar: 0.5%)Housing: stainless steel DIN 1.4301Process connection: stainless steel DIN 1.4571 or DIN 1.4435Sensor: stainless steel DIN1.4435, with flush face membrane, filled with silicone oilSealing: FKM 40 bar < NBRElectrical connection: DIN 43650TypeBase price in HRKDXX 4 XX X 2 530,00NIPRESS D-400Measuring methodAdd on prices in HRKD X 4 XX XR Gauge up to 125°C 0,00E Absolute up to 70°C (above 0.6 bar only) 309,00H Gauge up to 150°C (up to 150 bar only) 530,00J Gauge up to 300°C (up to 150 bar only) (up to 70 bar 200°C) 706,00Process connectionAdd on prices in HRKDX 4 XX XB 1/2” BSP (over 2.5 bar) 697,00C1/2” BSP (sensor: 1.4404) max. 125°C, -0.3-40 bar; without0,00media separatorE 1” BSP (over 0.25 bar) 1240,00F 1 1/2" BSP 1320,00L 1" Triclamp (ISO 2852) 0.6-40 bar 1320,00M 1 1/2" Triclamp (ISO 2852) 0.4-40 bar 1490,00N 2" Triclamp (ISO 2852) 0.25-40 bar 1690,00O DN 25 Pipe coupling (DIN 11851) 0.6-40 bar 1390,00P DN 40 Pipe coupling (DIN 11851) 0.4-40 bar 1540,00R DN 50 Pipe coupling (DIN 11851) 0.25-40 bar 1690,00SENSORSRange / OverpressureAdd on prices in HRKDXX 4 X X0 -1-0 bar / 3 bar 155,001 0-0.1 bar / 0,5 bar 287,002 0-0.25 bar / 1 bar 353,003 0-0.4 bar / 1 bar 353,004 0-0.6 bar / 3 bar 155,005 0-1 bar / 3 bar 0,006 0-1.6 bar / 6 bar 0,007 0-2.5 bar / 6 bar 0,008 0-4 bar / 20 bar 0,009 0-6 bar / 20 bar 0,00A 0-10 bar / 20 bar 0,00B 0-16 bar / 60 bar 0,00C 0-25 bar / 60 bar 0,00D 0-40 bar / 100 bar 0,00E 0-60 bar / 120 bar 0,00F 0-100 bar / 250 bar 0,00G 0-160 bar / 500 bar 0,00H 0-250 bar / 500 bar 0,00J 0-400 bar / 600 bar 0,00AccuracyAdd on prices in HRKDXX 4 X X1 0.25% (0.4 bar < p < 40 bar) 386,002 0.5% 0,00OutputAdd on prices in HRKDXX 4 XX2 4-20 mA 0,003 0-10 V 111,00D 4 Available on request: filled with food compatible oil (not available for DC--)570,00Accessories to orderTypePrice in HRKP L K 5 0 1 2* Plug-in indicator 1570,00P L K 5 0 1 3* Plug-in indicator with PNP output 1750,00* only for 2-wire versionUNICONT PLK-501142

SENSORSULTRASONIC PROXIMITY SENSORS AND TRANSMITTERSMICROSONARGENERAL DESCRIPTIONMICROSONAR proximity sensors use non-contact ultrasonic principles to detect and measure the position of an object. They act as proximity switches, or transmit the measurementof the distance from sensor face to the target. For transmitter models the output signal is either 4–20 mA or 0–10 V, which can be assigned to any part of the nominal range.Switching points of the proximity switch option can be set to any point within the range.MAIN FEATURESNon-contacting sensorAnalogue or switch outputNarrow beam angle2 measuring ranges(1 m, or 6 m)Adjustable sensing distanceSelectable processing parametersError indication outputMaintenance-free operationLED indicationProtection against shortcircuit and inverse polarityLocal and remote programmingAPPLICATIONSSensing distance of objectsProximity sensing and switchingFor small transport vehicles,trolleys, fork-liftsFor packaging equipmentsFor positioning equipmentsTECHNICAL DATAGeneral data UT ¨-211 UT ¨-212NominalrangeUR ¨-213UR ¨-214UT P-261 UT P-262UR P-263UR P-264X min (m) 0.2 0.4X max (m) 1.0 6.0Ultrasonic frequency 160 kHz 60 kHzTotal beam angle 5°Measure sequencetime (T p )25 ms 80 msResolution 0.25 mm 0.25 mm 0.1 mm 1.5 mm 1.5 mm 0.1 mmOutput 4–20 mA 0–10 V switch 4–20 mA 0–10 V switchProgrammingWith contact of PRG wire, or with magnetAmbient temperature –20 ... +70 °CPower supply10.8 ... 30 VConsumption Us = 12 V < 55 mA < 41 mA < 31 mA * < 54 mA < 40 mA < 30 mA *Consumption Us = 24 V < 63 mA < 49 mA < 39 mA * < 61 mA < 47 mA < 37 mA *Input protectionReverse polarity, transient surge, ESDIntegrated cable Shielded cable with PVC coating L = 3 mCable core 4 x 0.5 mm 2Electrical protectionClass III.Ingress protection U¨S – 2¨¨: IP 67, U¨P – 2¨¨: IP 68 IP 68Housing materialU¨S : Stainless steel with PP coveringU¨P: PP housingPP housing moulded with resinMass 400 g 530 g* unloadedOutput data UT¨-2¨1-4 UT¨-2¨2-4 UR¨-2¨3-4 UR¨-2¨4-4SENSORSURS-213Type of outputVoltage rating – – Max. 30 V DCCurrent rating – – Max. 200 mAResidual voltage – – < 2,5 VSwitching delay ordamping time (Tp*)U¨¨-21¨-4: 25 ms (a=1), 100 ms (a=4), 200 ms (a=8), 400 ms (a=16) **U¨¨-26¨-4: 80 ms (a=1), 320 ms (a=4), 640 ms (a=8), 1280 ms (a=16) **Temperature error ± 0.02% / °CLinearity error ± 0.35 % – –Repeatability 1.5 mm 1 mmOutput signal 4 ... 20 mA 0 ... 10 V (Us > 13 V) – –Load resistance ≤ 500 Ohm (Us > 14 V) ≥ 1 kOhm – –URP-263Output protection EMC EMC, short circuit EMC, short circuit, overload* Under proper reflection conditions ** value of „a” can be programmed143

SENSORSULTRASONIC PROXIMITY SENSORS AND TRANSMITTERSMICROSONAR U-2Programmable Ultrasonic proximity switches and transmitters for object sensingProcess connection:US-21-4: M30x1,5UP-21-4: G1”UP-26-4: to be fixed on a flat surface by 4 screwsIngress protection:US-21-4: IP65UP-2-4: IP68Integrated cable (3 m)Power supply: 10.8-30 V DCMICROSONARMICROSONAR URP-26TypeBase price in HRKUXX 2 X 41 0.2-1 m 1310,006 0.4-6 m (only with plastic housing) 1730,00FunctionAdd on prices in HRKU X 2XX 4R Switch 0,00T Transmitter 425,00HousingAdd on prices in HRKUX 2XX 4P Plastic (PP), IP68 0,00S Stainless steel, IP65 93,50MICROSONAR URP-26OutoutAdd on prices in HRKUXX 2X 41 4-20 mA (only with UT...) 0,002 0-10 V (only with UT...) 0,003 PNP (only with UR...) 0,004 NPN (only with UR...) 0,00U 2 4CableAdd on prices in HRKMaximum length 30 m; each started 1 m over the standard 3 m 19,60SENSORSMICROSONAR URS-21144

SYSTEM COMPONENTSGENERAL DESCRIPTIONThe wide product portfolio of NIVELCOrequires many types of system accessory components.These devices facilitate the integration of NIVELCO’slevel instruments to process control systems.The system component range consists of processcontroller units, universal displays, loop displays,interface and other expanding modules,time relays, etc.The newly developed UNICONT PGK intrinsically safeisolator power supply modules provides intrinsicallysafe power for 2 wire transmitters operating inhazardous locations and ensure galvanic insulationbetween input and output. The special feature of theunit is its high accuracy signal conversion.The UNICOMM SAK-305 communication modules areable to communicate between the HART-capable fieldtransmitters and the process controller PC-s or PLC-s,via USB or RS485 communication line.MULTICHANNEL PROCESS CONTROLLERSMultiCONTProgrammer, display and controller fortransmitters with HART protocol1 to 15 input channels4-20 mA, HART, RS485 outputDatalogger functionSD card slotExpandable with interface modulesHighly informative Dot-Matrix displayExplosion-proof modelspage 147UNIVERSAL INTERFACE MODULESUNICONT PJKMultiCONT expanding moduleRS485 communicationOutput variations:– 2x current outputs– 2x relay outputs (250 V AC, 8 A)– 1x current output and 1x relayDIN rail mountableProvides galvanic isolationLevel controlling and limit levelindication page 150CURRENT CONTROLLED SWITCHESUNICONT PKK4 - 20 mA inputDIN rail mountableCan power 2-wire transmittersGalvanic isolationPower relay (SPDT) outputSwitching amplifier for vibrating forksWire state monitoringExplosion-proof modelspage 151LOOP INDICATORSUNICONT PD4 - 20mA loop operatedOperation without external power supply6-digit plug-in LCD display20 mm digit heightUniversal field indicatorfor any transmitters4-20 mA / HART converter versionStainless steel flameproof housingExplosion-proof modelspage 153COMPONENTS145

SYSTEM COMPONENTSUNIVERSAL CONTROLLERSUNICONT PMDual line 4-digit LED displayPt 100, Ni100, J, K, S type. sensor,4-20 mA or 0-10 V inputUp to 3 power relaysON-OFF, PD or PID controlAuto tuningTransmitter power supplyHeating / cooling controlTIME RELAYNITIME2 and 10 function typesWide time range: from0.1 sec … 100 daysSmall sizeUniversal power supply voltageDIN rail mountableRelay outputCOMPONENTSpage 156EX ISOLATOR POWER SUPPLYUNICONT PGKIsolated power supply forintrinsically safe transmittersFor transmitters operating inin hazardous applications4-20 mA, HART communicationFor high precision transmittersUp to 5 ms response timeUp to 1 μA transmission accuracyDIN rail mountableExplosion-proof models page 160UNIVERSAL PUMP CONTROL SYSTEMUNICONT PSWPOWER SUPPLYNIPOWERLow cost automaticpump control systemUltrasonic level measurement0.4 - 3m measurement rangeProgrammable pump cyclingControlling of one-phase pumpsIncorporated circuit breakerIP68 protected sensorpage 161Output voltage: 12 / 24 V DCOutput current: 2500 mA / 1250 mAStabilized DC outputSwitching-mode power supplyShort-circuit protectionOverload protectionOvervoltage protectionDIN rail mountableHART MODEMUNICOMMHART - USB/RS485 modemDIN rail mountable versionTest clip connector versionNo need for power supplyGalvanic isolationExplosion-proof modelspage 163page 164PROCESS VISUALIZATION SOFTWARENIVISIONOnline monitoring of measured valuesTank configurationTransmitter configurationReal-time trend analysisData loggingDatabase handlingArchivingTank-farm visualizationpage 165page 162146

SYSTEM COMPONENTSMULTICHANNEL PROCESS CONTROLLERMultiCONTGENERAL DESCRIPTIONThe MultiCONT unit is a universal interface between NIVELCO’s HART-capable intelligent level transmitters and the other elements of the process control system like the PC-s ,PLC-s, displays and the actuators. Besides its role as an interface, the MultiCONT ensures the powering of the 2-wire transmitters while being capable of complex control tasks.The MultiCONT unit supports communication with a maximum of 15 standard or 4 Ex ia certified NIVELCO’s HART-capable 2- and / or 4-wire transmitters. If MultiCONT is used withNIVELCO’s MicroTREK microwave level transmitters the maximum number of transmitters in a loop should not exceed 6 pcs. for normal transmitters and 2 pcs. for Ex version transmitters.If a system contains more transmitters than one MultiCONT can handle, further MultiCONT units can be wired in series via an RS485 line. Remote programming of the transmittersand downloading of the parameters and measured data is possible using the MultiCONT. The various outputs such as 4 … 20 mA, relays and digital outputs can be controlled usingmeasured values and new values calculated from the measured values. The internal current outputs (max. 2 pcs.) of the MultiCONT can transfer and even modify information suppliedby the transmitters. The built-in relays (max. 5 pcs.) can be freely programmed and assigned to the transmitters. If a system contains more transmitters than one MultiCONTcan handle, further MultiCONT units can be organised in chain via RS485 interface. The large dot-matrix display allows visualisation of a wide range of informative display functions.One special feature is the "Echo-Map" visualisation when communicating with NIVELCO's EchoTREK and EasyTREK transmitters.MAIN FEATURESAs a Universal Process Controllerprovides for a flexible solution forcommissioning a process control systemconsisting of any HART-based intelligent(level, temperature or pressure) transmittersGalvanically isolated 4...20 mAoutputs for transmitters1 to 15 (standard) or1 to 4 (Ex ia) channelsHighly informative large displayEx ia model is availableSimple 6-button programmingTrend logging into internal memoryor SD memory cardUSB connector for downloadingdata from internal FLASH memoryExpanding with Universal InterfaceModules via RS 485 lineEcho Map for EchoTREK and EasyTREKultrasonic transmittersMultiCONTPRD-200APPLICATIONSRemote programming,displaying of transmittersPower supply for2-wire transmittersProcess controller for HARTcapable transmittersDisplaying measurement dataNumerical and in bargraph modeData transmission onRS 485 line (with HART orMODBUS protocol)Simple dataloggingTrend logging or loggingof flow measurementTYPICAL NETWORKCONTROLLED BY MultiCONTCOMPONENTSCERTIFICATIONSATEX II (1) G [Ex ia Ga] IIBIEC Ex [Ex ia Ga] IIB147

SYSTEM COMPONENTSMULTICHANNEL PROCESS CONTROLLERMultiCONTTECHNICAL DATATípusMultiCONT Poo – 2oo – oPower supply / power consumption /maximal supply voltage85…255 V AC 50…60 Hz / 12 VA / 255 V eff ;11,4…28 V AC 50…60 Hz / 12 VA / 28 V eff ; 11,4…40 V DC / 11 W / 40 V DCPower supply voltage for transmitters30 V DC / 60 mA (Ex version: 25 V DC / 22 mA)Graphic display128 x 64 dot-matrixRelayMax. 5 pcs, SPDT 250 V AC, AC1, 5 AAnalogue outputMax. 2 pcs, galvanically isolated 4 … 20 mA, Max. load: 500 ohm, with overvoltage protectionNumber of powered transmittersMax. 15 pcs standard, or max. 4 pcs ExRS 485 interface”user”Galvanically isolated, HART and MODBUS protocol”module”Galvanically isolated, HART protocolLogger unitCapacity: FLASH = 65000 entries; SD card = depends on the card! (max. 2 GB)Housing materialPolycarbonate (PC)MountingWall mountableAmbient temperature -20 °C … +50 °CIngress protection IP 65Electrical protectionClass I. / III.Mass0.9 kgSpecial data for Ex certified modelsEx marking, IEC ATEX II (1) G [Ex ia Ga] IIB ; IEC Ex [Ex ia Ga] IIBIntrinsically safe dataPower supply voltage for transmittersU 0 = 30 V, I 0 = 140 mA, P 0 = 1 W, L 0 = 4 mH, C 0 = 200 nF25 V DC / 22 mAAmbient temperature -20 °C … +50 °CSPECIAL FEATURESTrend logging (optional)Onboard logging capable versions of MultiCONT are able to store measurement values and threeadditional parameters of the connected transmitters in a measurement system into the internalFLASH memory or an SD memory card. The two modes, time-controlled and event-controlled loggingmodes can be used. Monitoring the average, minimum and maximum value or highest values ofthe flow can be used only for NIVELCO manufactured transmitters used in flow-metering mode.Content of the internal memory is retrievable through USB port, within the capacity of 65000 entries.Maximal capacity of the applicable SD card is 2 GB.COMMUNICATION BETWEENMULTICONT AND TRANSMITTERSPoint-To-Point connectionWith using a master (MultiCONT) andone slave (transmitter) in a system,a point-to-point connection is established.COMPONENTSNIVISION (optional) Process Visualisation SoftwareRS 485 capable versions of MultiCONT are able to communicate with NIVELCO’s NIVISION processvisualization software to indicate parameters of a process control system graphically on a processcontroller PC. The process, the measured values or any further processed values can be visualizedalso in tabular form with NIVISION. The NIVISION performs data logging, trend monitoring, databasehandling and various other tasks in addition to a basic visualization. The software is sold as acustom-tailored product.OUTPUT TYPE SELECTIONOutputsOnly display (w.o. RS 485or current output)RS 485 Interface1x 4-20 mA output2x 4-20 mA outputRS 485 + 1x 4-20 mAanalogue outputRS 485 + 2x 4-20 mAanalogue outputsOnly display(withoutrelay)1pc.No. of relays2pcs.3pcs.4pcs.5pcs.Multipoint connection (Multidrop).Multiple slaves connected in parallelSYSTEM SET-UPUsing this type of connection, the currentoutputs of the transmitters are automaticallyset to 4 mA (multidrop mode, with addressdiffering from zero).There is a Master-Slave relation between MultiCONT and the connected transmitters.Through the MultiCONT the transmitters can be programmed or their parameters checkedand modified. Reading the process values of the transmitters is easy to do by theMultiCONT. In case of using MultiCONT with multiple transmitters, the units shouldbe addressed with numbers (Short address) differing from zero. Using two transmitterswith the same Short address is not possible. MultiCONT can handle a number of max.15 transmitters with HART communication. When using 2-wire transmitters, the currentoutput of the transmitters will be limited to 4 mA, because of the capacity of theMultiCONT's power supply, which is rated at 60 mA with standard transmitters.148

SYSTEM COMPONENTSMULTICHANNEL PROCESS CONTROLLERMultiCONTMultiCONT P-200, Wall mountingUniversal remote control unit to program and read all Nivelco transmitters featuring HARTcommunicationEx marking: ATEX x II (1) G [Ex ia Ga] IIBIEC Ex [Ex ia Ga] IIB*Expandable version: featuring an RS485 port communication for relay and current output modulesTypeBase price in HRKP X 2XX XE Standard, non expandable 3550,00R Expandable 3720,00VersionAdd on prices in HRKPX 2 X X XW IP65 Enclosure 0,00C IP65 Enclosure, transparent cover 458,00D IP65 Enclosure, transparent cover, logger 850,00InputAdd on prices in HRKPXX 2 X X1 Single channel for one unit 0,002 2 channels for up to 2 units 842,004 4 channels for up to 4 units 1030,008 8 channels for up to 8 units 1400,00M 15 channels for up to 15 units 1870,00Output**Add on prices in HRKPXX 2 X X0 Display 0,001 Display and 1 relay 187,002 Display and 2 relays 374,003 Display and 3 relays 561,004 Display and 4 relays 748,005 Display and 1 relay and 1 current output 748,006 Display and 2 relays and 1 current output 935,007 Display and 3 relays and 1 current output 1120,008 Display and 4 relays and 1 current output 1310,009 Display and 4 relays and 2 current outputs 1870,00A Display and RS485 655,00B Display, RS485 and 1 current output 1220,00C Display, RS485, 1 current output and 2 relays 1590,00D Display and 5 relays 935,00E Display, RS485 and 5 relays 1590,00MultiCONT PEW-211MultiCONT PEC-211Power supply / ApprovalAdd on prices in HRKPXX 2 X X 1 85-255 V AC / none 0,002 11.4-28 V AC and 11.4-40 V DC / none 0,005 85-255 V AC / Ex (max. 4 channels) 1120,006 11.4-28 V AC and 11.4-40 V DC / Ex (max.4 channels) 1120,00P 2 * Need of IEC is to be specified with order** Other output configurations on requestNote: Please check relevant page for the prices of UNICONT PJKCOMPONENTS149

SYSTEM COMPONENTSUNIVERSAL INTERFACE MODULESUNICONT PJKGENERAL DESCRIPTIONThe UNICONT PJK series is a universal interface module that can be controlled via RS485 line, and (depending on type) provides relay(s) and/or 4…20 mA current output(s).The DIP switch in the front panel of the module is for setting the address.The Universal Interface Modules can be a widely used as a part of the following applications:Peripheral unit of PLC process control systemsPeripheral unit of PC automated process control systemsExpanding MultiCONT multichannel process controller with relays or current outputsThe UNICONT PJK-100 universal interface modules provide essential solution if the number of relays or current outputs of MultiCONT process controller is not enough in a system.The device can be used also as a peripheral unit for PLC or PC controlled process control systems. The sum of relays in UNICONT PJK-100 extension modules and MultiCONT mustnot exceed 64, the sum of analogue outputs (4…20mA) must not exceed 16.There is a universal module with both relay and current output in the variety of the UNICONT PJK series. Max. number of these modules may be 32. Programming of the modulesis done by MultiCONT.MAIN FEATURESRS 485 inputOutput:2 current or 2 relay outputFor mixed systems(with current and relay output)DIN rail mountableAPPLICATIONSUniversal Expanding ModuleFor PLC process controlsystemsFor automated processcontrol systemsoperating on RS485For MultiCONTTECHNICAL DATATYPEPJK-1-4Power supply 24 V DC ±10%PJK-110Power consumption 10 mA + N relay x 11 mA + N current generator x 25 mA)±10%Ambient temperature – 20 °C … + 50 °CElectrical connectionmax. 2,5 mm 2 twisted, or max. 4 mm 2 solid wireElectrical protectionClass III.Mechanical connectionDIN EN 50022-35 railIngress protection IP 20Mass0,11 kgCOMPONENTSTYPE PJK-102-4 PJK-111-4 PJK-110-4 PJK-120-4OUTPUT UNITS 2 relays 1 relay + 1 current output 1 current output 2 current outputsRelayCurrentgeneratorRelay SPDT –Rating 250 V AC,8 A, AC1 –Insulation voltage 2500 V 50 Hz –Electrical / mechanical lifespan 105 / 2 x 10 6 switchings –Impulse width in pulse mode 0,1 … 25,5 s –Electrical protection Class II. –Linear range – 3,601 mA … 21,999 mAError indication – 3,6 mA, or 22 mAResolution – 14 bitAccuracy – 40 μATemperature dependence – max. 15 μA / 10 °C150

SYSTEM COMPONENTSMULTIFUNCTIONAL CURRENT CONTROLLED SWITCH MODULESUNICONT PKKGENERAL DESCRIPTIONUNICONT PKK-312 series is a 4 … 20 mA current controlled limit switch featuring galvanic isolation also available as an intrinsically safe unit. The input 4 … 20 mA signals canbe transferred from passive or active outputs of 2- or 4-wire transmitters. The value of the input signal will be compared in the unit with the set (taught) value and the state of thegalvanically isolated relay changes in accordance with the comparison mode programmed.The double throw output relay can be programmed for the following functions:Limit switch (high or low fail safe)ON-OFF control with selectable switching differenceMonitoring of discontinuity or short-circuit of the cableWindow comparison operation mode with energised or de-energised relay stateMonitoring of discontinuity or short-circuit of the cable instead of the 4…20 mA current a dry contact can also be connected to the input. The state of this contact will be copiedand the output signal will be galvanically isolated. The circuitry incorporated in the UNICONT PKK-312 enables delayed switching, a switching delay of 0.1, 1, 2, and 5 secondscan be selected. The UNICONT PKK-312-8 Ex is a special version, designed to cooperate with Ex rated NIVOSWITCH vibrating fork level switch, as an intrinsically safe powersupply and amplifier unit.MAIN FEATURES4…20mA inputRelay outputDIN rail mountableIntrinsically safe versionsAPPLICATIONSGalvanic isolatedlimit switchPower supply for transmittersCable state monitoringTECHNICAL DATACERTIFICATIONSATEXATEXTYPEPower supply (U)PKK-312II (1) G [EEx ia] IIBII (1) G [EEx ia] IICTYPENominal input current rangeAccuracy of switching level / Threshold levelDiscontinuity threshold / Lower value fault currentShort circuit threshold / Upper value fault currentInput impedanceInput overload capabilitySwitching delayOutputRelayRatingElectrical connectionMechanical connectionPKK – 312 – o1 ... 22 mA± 0.1 mA3,7 mA22 mA10 max 100 mA (permanent)0,1 s; 1 s; 2 s; 5 s selectable1 x SPDT250 V AC, 8 A, AC1max. 2.5 mm 2 twisted, or max 4 mm 2 solid wireDIN EN 50022-35 railIngress protection IP 20MassSTANDARD VERSIONEx VERSION 0,21 kgPKK-312-1 PKK-312-2 PKK-312-3 PKK-312-4 PKK-312-5 Ex PKK-312-6 Ex PKK-312-7 Ex PKK-312-8 Ex230 V AC ±10%50…60 Hz110 V AC ±10%50…60 Hz24 V AC ±10%50…60 Hz24 V AC ±10%,50…60 Hz,24 V DC ±15%230 V AC ±10%50…60 Hz110 V AC ±10%50…60 Hz24 V AC ± 10%, 50…60 Hz,24 V DC ±15%COMPONENTSPower consumption < 2.7 VA

SYSTEM COMPONENTSUNIVERSAL INTERFACE MODULESUNICONT PJK / PKKUNICONT PJK-100Universal Interface Modules:Price in HRKP J K 1 0 2 4 with 2 x SPDT relay output 833,00P J K 1 1 0 4 with 1 x 4-20mA current output 680,00P J K 1 1 1 4 with 1 x 4-20mA current output and 1XSPDT relay output 986,00P J K 1 2 0 4 with 2 x 4-20mA current output 1180,00UNICONT PKK-300Programmable current-controlled remote switching unit featuring 1-22 mA input current andpowering capability for transmittersOutput: SPDT, potential free relay, 250 V AC, 8 A , AC1Power supply: 230 V AC, 110 V AC, 24 V AC or 24 V AC/DC (according to order code below)Operating modes: Limit switchDifferential switchWindow switchEx marking: ATEX x II (1) G [EEx ia] IIB (in case of 230 V AC and 110 V AC)ATEX x II (1) G [EEx ia] IIC (in case of 24 V AC / DC)UNICONT PJK-111TypeBase price in HRKP KK 3 1 2 1 230 V AC 757,00P KK 3 1 2 2 110 V AC 757,00P KK 3 1 2 3 24 V AC 757,00P KK 3 1 2 4 24 V AC/DC 1160,00P KK 3 1 2 5 230 V AC / Ex 1090,00P KK 3 1 2 6 110 V AC / Ex 1090,00P KK 3 1 2 7 24 V AC/DC / Ex 1280,00P KK 3 1 2 8 24 V DC / Ex vibrating fork 1360,00UNICONT PKK-312COMPONENTSNIV24UNICONT PKK-312-1152

SYSTEM COMPONENTSLOOP INDICATORSUNICONT PDGENERAL DESCRIPTIONThe UNICONT series loop indicators are universally scalable process value indicators of NIVELCO, most of them without the need for power supply. The process indicators find their usewhere the process value has no control function (such as switching ON/OFF, pressure control, etc.), or local displaying is needed besides the remote data processing. The devices areapplicable not only for NIVELCO transmitters, but for all transmitters which use standard 4-20 mA output. The UNICONT PDF devices are digital, field process 2-wire indicators suitablefor indication of temperature, pressure, level, etc. values with 6 digit SAP-200 LCD display. The information is carried by the loop current without the need for additional power supply.Robust enclosure makes applications under harsh conditions also possible. Explosion proof versions are available for hazardous environments. The HART capable UNICONT PDF 3-wireprocess indicators require additional power supply. Besides displaying the loop current or the process values, these units convert input current to HART signals and so enable devices thathave analogue outputs only to be integrated into HART multidrop systems. The UNICONT PDF-600 series with flameproof (Ex d approved) stainless steel housing meets the special requirementsof certain industry segments, such as Food and Beverage, Marine, Oil and Gas.MAIN FEATURES4 - 20 mA input2-wire loop indicator3-wire 4-20mA + HARTtransmitterWall mountableScalable displayIP 67 protectionEx versionAPPLICATIONSGeneral indicatorSuitable for 4-20 mA transmitters4-20 mA - HART converterDisplaying level, volume, temperature,pressure, etc.UNICONT PDF-400 Exwith flameproofaluminium housingUNICONT PDF-500with plastic housingUNICONT PDF-600 Exwith flameproofstainless steel housingCERTIFICATIONSATEXATEXATEXATEXATEXII 1 G EEx ia IIC T6II 1 G EEx ia IIB T6II 2 G EEx d IIB T6II 1/2 G EEx d ia IIB T6II 2 G Ex d IIB T6PLUG-IN LOOP INDICATORSGENERAL DESCRIPTIONThe UNICONT PLK-501 type plug-in displays with4 digit LED indicator can be connected to the 2-wiretransmitters with its DIN 43650 connector(such as NIPRESS pressure gauge / transmitter,AnaCONT LCK conductivity transmitter).The displayed numerical values can be freely scaledto the current input by the user, setting the maximumand the minimum value.Symbols on the display module:• M – metric (Eu) engineering system• US – imperial engineering system• ºF, ºC, m, cm, in ,ft, l, m 3 , gal, ft 3• PROG – programming modeMAIN FEATURES4 - 20 mA input4-digit LED indicatorRotatable displayOperation without external powerPNP switch outputIP 65 protectionAPPLICATIONSMountable between standard DIN 43650 connectorsFor 2-wire transmitters with 4-20 mA outputDisplayed values:• DIST – distance• LEV – level• VOL – volume• % – percentage• mA and °C – current and temperature• – arrow (shows theselected dimension)UNICONT PLKPLK-501COMPONENTS153

SYSTEM COMPONENTSLOOP INDICATORSUNICONT PDTECHNICAL DATATYPEStandardPDF-401-2PDF-501-2Ex versionPDF-401-6 ExPDF-401-A ExPDF-401-C ExPDF-601-A ExStandardwith HART outputPoF-401-4PoF-501-4Powering 2-wire 3-wireMeasured value (input signal)4-20 mA current loopMeasurement range 3.6 - 22 mA 0 - 22 mAOutput4-20 mAEx version with HART outputPoF-401-8 ExPoF-401-B ExPoF-401-D ExPoF-601-B Ex4-20 mA and/or HART for 4-20mAcurrent limit values: 3.9-20.5 mAterminal resistor for HART: Rtmin = 250 OhmPower supply - 10V – 36VDisplaySAP-202 display, Range of displayed value: -9999 …+29999Accuracy ± 0.1 % if displayed value is >10000; ±0.2% if displayed value is

SYSTEM COMPONENTSLOOP INDICATORSUNICONT PDUNICONT P2- or 3-wire, universal field mounting process current display and converterInput: 4-20 mAHousing: Aluminium, stainless steel or plastic with IP67 / NEMA 6Ex marking: ATEX x II 1 G EEx ia IIC T6 orATEX x II 1 G EEx ia IIB T6 orATEX x II 2 G EEx d IIB T6 orATEX x II 1/2 G EEx d ia IIB T6TypeBase price in HRKPXF X 0 1 X 1780,00UNICONT PDF-401/501VersionAdd on prices in HRKP F X 0 1 XT Without local LCD display 0,00D With local LCD display 439,00HousingAdd on prices in HRKPXF 0 1 X4 Aluminium (paint coated) 140,005 Plastic, PBT glass fibre reinforced (Ex version not available) 0,006 Stainless steel (only EExd version) 906,00UNICONT PDF-601Output / ApprovalAdd on prices in HRKPXF X 0 1 2 4-20 mA / none 0,004 4-20 mA + HART / none 688,006 4-20 mA / EEx ia 748,008 4-20 mA + HART / EEx ia 1440,00A 4-20 mA / EEx d 1120,00B 4-20 mA + HART / EEx d 1810,00C 4-20 mA / EEx d ia 1870,00D 4-20 mA + HART / EEx d ia 2560,00P F 0 1 Accessories to orderTypePrice in HRKSAP 2 0 2 Plug-in display module 439,00SAT 3 0 4 HART-USB modem 1520,00S A K 3 0 5 2 HART-USB/RS485 modem 2090,00S A K 3 0 5 6 HART-USB/RS485 modem / Exia 2280,00UNICONT P2-wire, universal plug-in indicatorConnector: DIN 43650Input: 4-20 mAOutput: 4-20 mADisplay: 7.6 mm high 4-digit LED charactersPlastic housing with IP65TypePrice in HRKP L K 5 0 1 2 Plug-in indicator 1570,00P L K 5 0 1 3 Plug-in indicator with PNP output 1750,00COMPONENTSUNICONT PLK-501155

SYSTEM COMPONENTSUNIVERSAL CONTROLLERSUNICONT PMGENERAL DESCRIPTIONThe UNICONT PM-300 is a universal,one or two-channel process controller with relay and analogue outputs and PID algorithm supporting versatile functions. It can be used fromstandard to extraordinary temperature control (cooling, heating) tasks. Beside the usual inputs, practically all generally used temperature sensors can be connected. Due to its autotuning feature the controller can successfully handled by technicians unaccustomed to the process control. The dual 4-digit lighting displays allow viewing even from greater distances.The UNICONT PM-300 is highly accurate and easy to handle, thus suitable for applications as panel instrument both in laboratory and industrial process control applications.MAIN FEATURESProgrammable inputs4 digit LED displayHigh ratings relay contactsor analogue output4-20 mA outputON/OFF,PD or PID control algorithmAuto tuning featureRelay outputs up to 4 pcs32 point linearizationWindow comparator differential meteringAPPLICATIONSTemperature displaySwitching, control ortransmitting tasksPower valve controlSequence controlDual channel displayTECHNICAL DATATypeUniversal InputsOutputControlControl relays (2 pcs)Alarm relays (2 pcs)Solid state relay(SSR) drivers (2 pcs)Current outputs(2 pcs)Supply fortransmittersRS485 MODBUSUNICONT PMM–300Thermocouples: K, J, T, E, L, U, N, R, S, B, M, A, C,Resistive thermal devices (RTD): Pt 100, JPt 100, Pt 1000, JPt 1000, Cu 100, Ni 100Current: 4-20 mA, 0-20 mAVoltage: -5+20 mV, 0-100 mV, 0-500 mVResistance: 0-500 , 0-2000 Current input: 10 . Voltage input >10 MSPDT 250 V AC 5A AC11SPST (NO or NC programmable) 30V DC/250V AC 3A AC1112V DC, 15mA0/4-20mA DC (max. load: 600), galvanically isolatedshot circuit protected, programmable24V DC, 100 mA, shot circuit protectedBit rate: 600-38400 bps selectable, Device address: 0 ... 254 programmableFeatures Setting time Setting unitProportional band (P) 0 - 409,5% 0,1%Integral time (I) 0 - 4095 sec 1 secDerivate time (D) 0 - 4095 sec 1 secCycle time(T) 0 - 255 sec 1 secDead band 0 - 255 in PV resolutionHysteresis 0 - 255 in PV resolutionDisplayProgramming PVPV (Upper display), red, 4 digits, 7 segments, digit height: 10 mmSV (Lower display), green, 4 digits, 7 segments, digit height: 10 mmDigital, by front panel keysCOMPONENTSAccuracy of settingand displayingSensor wire-break alarmCold junctioncompensationWire resistancecompensation± 0.2%FS ± 1 digit.”Er 11.” on SV display (only if the controller is on)Ext. temperature sensor to be connected to terminal block.The function can be disabled3-wire, automaticAmbient humidityAmbient temperaturePower supplyMax .85% (relative) non condensingOperational: 0°C ... +55°C, Storage: -20°C ... +60°C85 ... 265V AC, 50/60 Hz, 8VA, 120 V 375 V DC 8 VA16-32 V DC, 8W, 13-30V AC, 8VAElectrical connection Plug-in terminal blocks (recommended wire cross section: 0.5 - 2.5 mm 2 )PMM-300Electrical protectionIngress protectionMemory protectionDimensionsMassClass II.Front: IP65, Back: IP20Data stored in EEPROM101.5 x 48 x 156 mm0.3 kg156

SYSTEM COMPONENTSUNIVERSAL CONTROLLERSUNICONT PMUNICONT PM-300Universal panel indicator and controller with 4-20 mA analogue and relay outputPID and ON/OFF control as well as auto tuning softwareSize: 96x48 (horizontal position)Display: 2 lines, 9 mm high 4 digit LED character eachPower supply: 85-265 V AC, 120-375 V DC or 24 V AC/DCTypeBase price in HRKPM X 3 XX X 1850,00VersionAdd on prices in HRKPM 3 XX XM Standard, front: IP65, back: IP20 0,00InputsAdd on prices in HRKPM X 3 X X1 Universal input (IN1) 0,002 Two universal inputs (IN1, IN2) 275,003 Universal input (IN1), 32-point Linearisation 688,004 Two universal inputs (IN1, IN2), 32-point Linearisation 1030,00UNICONT PMM-300OutputAdd on prices in HRKPM X 3 X X1 Current output, 2 relays 0,002 2 current outputs, 2 relays, power supply for transmitters 255,003 Current output, 4 relays 213,004 2 current outputs, 4 relays, RS485, power supply for transmitters 550,00Power supplyAdd on prices in HRKPM X 3 XX1 85-265 V AC, 120-375 V DC 0,002 24 V AC/DC 0,00PM 3COMPONENTSNIV24UNICONT PMM-311-1UNICONT PMM-312-1UNICONT PMM-313-1157

SYSTEM COMPONENTSUNIVERSAL CONTROLLERSUNICONT PMGENERAL DESCRIPTIONThe UNICONT PM-400 and -500 series universal controllers are 1/16 DIN (48x48 mm) process controllers with relay and analogue outputs or PID algorithm supporting versatilefunctions. The universal analogue PID-controllers can be used with a Pt-100 resistance thermometer and with different thermocouples for temperature measurement, control as wellas processing the signals of transmitters with 4 … 20 mA and 0…5 V DC or 0…10 V DC output. The output signal of the controller can be a relay, continuous 4 … 20 mA processcurrent signal or SSR-driver. Additional alarm relayprovides for limit monitoring. The unit is microprocessorbased, has an auto-tuning software, automatic and itsPID controller is able to find the optimum of the P-I-Dconstants. PMM-500 series are able to communicate onRS485 line and also able to provide power supply fortransmitters. The large bi-coloured display provides easyreading even from far distance.MAIN FEATURESUniversal input4…20 mA output, relay outputsSSR driver outputRS485 communicationON-OFF and PID controlPower supply for transmittersAuto tuning (AT) featureDIN 48x48 mm front panelAPPLICATIONSTemperature displaySwitching, control tasksCooling / heating controlAlarm indicationTECHNICAL DATATypeInputControl, OutputRTDs(3-wire., automaticwire-resistance comp.)Thermocouples(automaticjunction junctioncompensation)VoltageCurrentPIDType of outputPMG-41DIN Pt 100 (–199.9 °C ... +199.9 °Cor 0 °C ... +500 °C)R wire: max. 5 ohmK(-100 °C … +1100°C); J(0°C … +800°C)R(0°C … +1700°C); E (0°C … +800°C)T(-200°C … +400°C); S (0°C … +1700°C)N(0°C … +1300°C); W (0°C … +2300°C)1 … 5 V DC; 0 … 10 V DC4 … 20 mA DC / 250 ohmProportional band (P) 0 … 100%Integral time (I)0 … 3600 secDerivate time (D)0 … 3600 secCycle time(T)1 … 120 secRelaySPDT 250 V AC, 3 A, AC11SSR driver12 V DC ±3 V, max 30 mACurrent4 … 20 mA DC (max. load: 600 ohm)SPST (NO or NC programmable) 250 V AC, 1 A, AC11Alarm outputAccuracy of setting and displaying ±0.3% ±1 digit of full range or ±3 °CDisplayPV (primary value)red, 4 digits, 7 segments, digit height: 11 mmSV (secondary value)green, 4 digits, 7 segments, digit height: 7 mmPower supply 100 … 240 V AC 50/60 Hz, max. 5 VA, Operational voltage: 90% … 110%Ingress protection Front: IP 65, Back: IP 20Electrical protectionClass II.Ambient temperature Operational: -10 °C … +50 °C, Storage: -20 °C … +60 °CAmbient humidity35% … 85% (relative) non condensingDimensions48 x 48 x 107 mm (front panel cut-out: 45.5 +0.5 x 45.5 +0.5 mm)Mass0.15 kgCOMPONENTSPMG-400PMM-500TypeInputControlOutputDisplayRTDs (3-wire., automaticwire-resistance compensation)PMM-51DIN Pt100 (–199 °C ... +800 °C)Thermocouples (automaticjunction compensation)J, T, K, L, N, B, R, S, C, PtRh thermocouples (-240 °C ... +2320 °C)Voltage0 - 5 V DC; 0 - 10 V DC, 2 – 10 V DC /min. 500Current4 … 20 mA DC, 0 … 20 mA DC / max. 500Proportional band (P) 0.5 – 100%Integral time (I)1 – 6000 secDerivate time (D)0 – 6000 secCycle time (T)0.5 – 512 secRelay240 V AC, 2 A, AC11, SPDTSSR driver0 - 10 V DC, max 20 mARS485Modbus RTU, 1200 – 19200 bpsAnalogue4 … 20 mA DC (max. load: 500 ohm)Supply for transmitters24 V DC, 22 mA (19 V DC - 28 V DC)PV (primary value)red, 4 digits, 7 segments, digit height: 10 mmSV (secondary value)green, 4 digits, 7 segments, digit height: 8 mm20 - 48 V AC / 22 - 65 V DC, 100 - 240 V AC, max. 5 W / 7 VAPower supplyIngress protection Front: IP 66, Back: IP 20Electrical protectionClass II.Ambient temperature Operational: 0 °C … +55 °C, Storage: -20 °C … +80 °CAmbient humidity20% … 85% (relative) non condensingDimensions 48 x 48 x 110 mm (front panel cut-out: 45 +0.5 +0.2 x 45 +0.5 +0.2 mm)Mass0.25 kg158

SYSTEM COMPONENTSUNIVERSAL CONTROLLERSUNICONT PMG-400Universal panel indicator and controllerPID and ON/OFF controlSize: 48x48 mmDisplay: 2 lines, 4 digit LED character eachPower supply: 90-264 V ACUNICONT PMTypeBase price in HRKPM G 4 XX 1 859,00InputsAdd on prices in HRKPM G 4 X 11 Universal input (IN1) 0,00OutputAdd on prices in HRKPM G 4 X 11 2 relays 0,002 1 relay, 1 solid state driver 0,003 1 relay and 4-20 mA 0,00PMG 4 1UNICONT PMG-400UNICONT PM-500Universal controller, display unit1 universal inputRelay or analogue output, 48x48 mm panel unitPower supply for transmitters (Ut)PID control algorithm, auto tuning (AT) functionDisplay: 2 lines, 4 digit LED display, 10 mm and 8 mm charactersPower supply: 100-240 V AC or 20-48 V AC / 22-65 V DCTypeBase price in HRKPM M 5 1 X X 1450,00OutputAdd on prices in HRKPM M 5 1 X1 R1, R2 relays, analogue output 0,002 R1, R2 relays, Ut 85,003 R1 relay, analogue output, Ut 85,004 R1, R2, R3 relays 0,005 SSR1, SSR2 solid state driver, analogue output 0,006 SSR1, SSR2 solid state driver, Ut 85,007 SSR1 solid state driver, analogue output, Ut 85,008 SSR1 solid state driver, R1 relay, analogue output 0,00A R1, R2 relays, analogue output, RS485 323,00B R1, R2 relays, Ut, RS485 408,00C R1 relay, analogue output, Ut, RS485 408,00D R1, R2, R3 relays, RS485 323,00E SSR1, SSR2 solid state driver, analogue output, RS485 323,00F SSR1, SSR2 solid state driver, Ut, RS485 408,00G SSR1 solid state driver, analogue output, Ut, RS485 408,00H SSR1 solid state driver, R1 relay, analogue output, RS485 323,00Power supplyAdd on prices in HRKPM M 5 1 X 1 100-240 V AC 0,002 20-48 V AC / 22-65 V DC 0,00UNICONT PMM-500COMPONENTSPMM 51 Accessories to orderTypePrice in HRKPAM-500-0 Front panel adapter from 96x48 mm to 48x48 mm 136,00anodized aluminium159

SYSTEM COMPONENTSINTRINSICALLY SAFE ISOLATOR POWER SUPPLY MODULESUNICONT PGKGENERAL DESCRIPTIONThe UNICONT PGK-301 intrinsically safe isolator and power supply modules are suitable for providing power supply for transmitters operating in hazardous applications, isolatingthe input, output and supply voltage galvanically. Moreover the device perform high accuracy signal transmission with 4-20 mA or HART communication between Ex and non-Exareas. The UNICONT PGK-301 intrinsically safe isolators perform signal transmission to the non-Ex Zone with microprocessor controlled digital signal processing, which providestransmission accuracy up to 1 μA. This is a special demand in case of certified, high precision (for example magnetostrictive) transmitters. If fast conversion speed is necessary,the high speed types are the ideal choices. The number of connectable transmitters is determined by the intrinsically safe limit data.MAIN FEATURESIntrinsically safe isolationPower supply for transmitters20 - 35 V DC supply voltage4-20 mA, HART communicationUp to 1 μA transmissionaccuracyDIN rail mountableAPPLICATIONSFor high precisiontransmittersFor transmitters operatingin hazardous applicationsFor certified measurementinstrumentsAlso for temperature andpressure transmittersFor 2-3 wire4-20mA transmittersCERTIFICATIONSTECHNICAL DATATYPEHigh precisionHigh speedPGK-301-A Ex PGK-301-B Ex PGK-301-C Ex PGK-301-D ExInput4-20 mANormal operation4-20 mACurrent error3.6 mA: IIN=3.6 mA or IIN>24 mAProtectionInput, output, power supply: 125 mA fuseLoop resistance300-1000 Ohm/24 V DCCommunication - HART - HARTPower supply20-35 V DCPower supply indicationgreen LEDPower supply for transmitters23 V DC galvanically isolatedGalvanic isolation> 2 kVPower consumptionMax. 2.2 WTransmission accuracy 1 μA (at 20 °C) 8 μA (at 20 °C)Response time 100 msec 5 msecTemperature dependence < 1 μA/ °CAmbient temperature - 20 °C…+ 60 °CElectrical connection Terminal, wire cross section: 0.5 – 2.5 mm 2Electrical protectionClass III.Mechanical connectionDIN EN 50022-35 rail mountable, module width: 22.5 mmMass0.25 kgOutputCOMPONENTSATEX II (1) G [Ex ia Ga] IIBATEX II (1) G [Ex ia Ga] IICIEC Ex [Ex ia Ga] IIBIEC Ex [Ex ia Ga] IICPROTECTION TYPEExmarkingIntrinsically safe dataUNICONT PGKEx iaATEX II (1) G [Ex ia Ga] IIC II (1) G [Ex ia Ga] IIBIEC Ex [Ex ia Ga] IIC [Ex ia Ga] IIBL 0 = 2 mH C 0 = 60 nF L 0 = 9 mH C 0 = 450 nFU 0 =26 V I 0 =94 mA P 0 =0,65 WUm= 253 V ACTypeBase price in HRKPG K 3 0 1 X 1060,00Output / CommunicationAdd on prices in HRKPG K 3 0 1 A 4-20 mA, high precision 0,00B 4-20 mA, high precision / HART 272,00C 4-20 mA, high speed 0,00D 4-20 mA, high speed / HART 272,00PG K 3 0 1 Need of IEC is to be specified with order160

SYSTEM COMPONENTSULTRASONIC PUMP CONTROL SYSTEMUNICONT PSWGENERAL DESCRIPTIONThe low-cost UNICONT PSW pump control unit is designed for fully automatic level control of small domestic or communal sewage shafts, sumps or wetwells. An IP68 protectedultrasonic level transmitter performs continuous level measurement and delivers 4–20 mA level data to the UNICONT PSW unit featuring a user programmable controller.This controller featuring relay output incorporated in the UNICONT PSW directly controls the single phase pump acting in the sump, well, etc. The current controlled switch operatesin differential level switch mode as default, the low and high levels are programmable. By the help of an optional programmable timer automatic pump cycling can be performedto prevent jamming of the pump in case of long idle periods. This function is useful in case of infrequent usage or low water consumption. The optional NIVOFLOAT NLP typefloat level switches may be used for additional dry-run or overfill protection if safety is a priority. The system can be turned on or off by a single-pole Miniature Circuit Breakeror a Motor Protection Switch.MAIN FEATURESCost-savingMaintenance-freeFully automatic pump controlUltrasonic level measurement0.3-3 m measurement rangeProgrammable pump cyclingIP68 / IP65 protectionOptional dry-run or overfillprotectionAPPLICATIONSDomestic sewage shafts, wetwellsSumpsTanks, flood storageDrainage sumps, poolsUNICONT PSW-100Ultrasonic pump controlMeasuring range: 0,3-3 mPower supply: 230 V ACOutput: SPDT relay, 250 V AC, 8 A, AC1Functions: automatic pump out control, timed pump cycling,optional motor protectionProcess connection of ultrasonic device: 1" BSP3 m integrated cableIngress protection:ultrasonic device: IP68controller: IP65TECHNICAL DATATYPETypeBase price in HRKP S W 1 XX 1 3320,00Timer functionAdd on prices in HRKP S W 1 1 10 Without 0,001 With 264,00Short circuit protectionAdd on prices in HRKP S W 1 X 11 Circuit braker 0,002 Motor protection switch 842,00UNICONT PSW–1oo–1Power supply 230 V AC ±10%ProtectionOutputFunctionsControlunitLeveltransmitterType:UTP-241-4-X14Miniature CircuitBreakerMotor Protection SwitchAutomatic pump outcontrol 1Timed pump cyclingOverfill protection, failsafeindicationCLS 4-C10/2 10 A bipolarZ-MS2P-10 6.2-10A1-1 piece of NO relay, 250 V AC, 8A, AC1Field programmable high level(Pump ON and low level (Pump OFF)10 s – 100 daysFloat switch 2Electrical connection4 pcs. plastic cable glands,terminal: max. 4 mm 2 wire cross sectionElectrical protection Class I.Mechanical connectionwall mountableIngress protectionIP65Ambient temperature –25 °C ... +45 °CMass~2 kgRange0.3 – 3 mOperation principleultrasonicHousing materialPPMedium tempereature -25 °C ... +60 °CProcess connection1” BSPCable3 m shielded, PVC insulationPower supply24 V DCIngress protectionIP681 Programmed at the manufacturer;can be modified freely in 0.4-3 m range2 Accessory, to be ordered separatelyUltrasonictransmitterControl unitCOMPONENTSP S W 1 1CabelAdd on prices in HRKMaximum length 30 m; each started 1 m over the standard 3 m 19,60Optional: NIVOFLOAT for overfill protection as an expansion of the pump control systemSee NIVOFLOAT float level switches for further information161

SYSTEM COMPONENTSPOWER SUPPLY MODULESNIPOWERGENERAL DESCRIPTIONThe rail mounted NIPOWER switching-mode power supply modules provide 12 V or 24 V stabilized DC output for low power consumption devices.MAIN FEATURESStabilized DC outputSwitching-mode power supplyDIN rail mountedShort-circuit protectionOverload protectionOvervoltage protectionAPPLICATIONSFor any transmittersPower supply for sensorsFor inductive, capacitiveproximity switchesFor infrared sensorsUltrasonicProximity sensorsTECHNICAL DATATYPE PPK-321 PPK-331Power supply voltage (U IN ) 230 V AC / 50-60 Hz -15%; +10%Output voltage (U OUT ) 12.2 V DC ±2% 24.2 V DC ±2%Output current * 2500 mA 1250 mAConsumption without loadConsumption with maximum loadmax. 5 V Amax. 78 V AOverload capability max. 120%Efficiency >75%FuseProtection againstOutput voltage indicatorRipple on the output without loadRipple on the outputwith maximum loadDelay on switching ONDelay on switching ON after overloadOperating temperatureElectrical strength betweeninput and outputT2A / 250 Vshort-circuit, overload, overvoltagegreen LED80 mV20 mVmax. 0.5 secmax. 0.5 sec–20°C … +40°C4 kVElectrical connection terminal, wire cross section: max. 2.5 mm 2Electrical protectionClass II.Mechanical connectionDIN EN 50022-35 railIngress protection IP 20Mass136 g* Correct air-flow is needed to prevent overheatingPPK-31COMPONENTSNIPOWER PPK-3Power supply unitMechanical connection: DIN EN 60715 railPower supply: 230 V ACSecunder voltage: 12V DC 24 VDCIngress protection: IP20Dimensions: 50 x 90 x 62 mmTypeBase price in HRKPPK 3 2 1 12 V DC / max. 2.5 A 383,00PPK 3 3 1 24 V DC / max. 1.25 A 383,00162

SYSTEM COMPONENTSTIME RELAY MODULESNITIMEGENERAL DESCRIPTIONNITIME time relays are suitable for all kinds of timing tasks of technological equipments. Microprocessor controlled operation, many functions, universal power supply voltage,and slim module width are the main characteristics making NITIME time relays applicable also for automation tasks of lights, pumps, heating, coolers, fans or motors.MAIN FEATURES2- and 10-function typesWide time rangeSmall sizeUniversal power supply voltageDIN rail mountableRelay outputIP 20 protectionAPPLICATIONSProcess controlling ofrepeated tasksTimed cycling ofpumps or compressorsTiming of technologic equipmentsSequential controlTECHNICAL DATATYPE JEL-111 JEL-121Number of functions 10 2Time ranges 0.1 sec…10 day 0.1 sec…..100 dayTime settingrotary switch and potentiometerReset timemax. 150 msecTime deviation 5%Repeat accuracy 0.2%Temperature coefficient 0.01% / °CSupply voltage12-240V AC/DCPower consumption 0.7-3 V A AC 0.5-1.7 W DCRelay1 x SPDTRated current16 A AC1Inrush current30 A (< 3 sec)OutputOutput indicationmultifunction LEDSwitching voltage250V AC (AC1) / 24V DCBreaking capacity 4000 V A AC 384 W DCMin. breaking capacityDC 500 mWJEL-121JEL-111Electrical lifespan (AC1) 0,7x10 5Mechanical lifespan 3x10 7Electrical connectionterminal for cables with max 2.5 mm 2 wire cross sectionElectrical protectionClass II.Mechanical connectionDIN EN60715 railIngress protection IP 20Ambient temperature–20°C … +55°CMass 90 g 70 gNITIMEMultifunctional timer, DIN rail mountablePower supply: 12-240 V AC/DCOutput: 1x SPDT relay: 250 V AC/16A, AC110 functions, 8 timing range: 0.1 sec-10daysCOMPONENTSTípusPrice in HRKJ EL 1 1 1 194,00NITIMECyclic timer, DIN rail mountablePower supply: 12-240 V AC/DCOutput: 1x SPDT relay: 250 V AC/16A, AC1ON / OFF delay can be set independently: 0.1 sec-100 daysTípusPrice in HRKJ EL 1 2 1 228,00NIV24NITIME JEL-111NITIME JEL-121163

SYSTEM COMPONENTSUNIVERSAL COMMUNICATION INTERFACE MODULESUNICOMMGENERAL DESCRIPTIONThe UNICOMM interface modules are able to establish communication line between HART-capable field devices and process controller computer. The UNICOMM HART modems areapplicable not only for NIVELCO transmitters, but for all HART-capable transmitters which use standard HART communication. The device is galvanically isolated from both (USB andHART) sides, when it is used as a HART-USB modem, connected into the USB input of a PC, the modem does not need external power supply. The UNICOMM SAK-305 modules canbe connected into a suitable device with RS485 interface input, used as a HART-RS485 modem. The communication protocol is HART on the RS485 line. In this case the device needsexternal power supply. The Ex versions can be connected to transmitters placed in hazardous areas.MAIN FEATURESTransferring measurement data to PCConnecting field transmitters to the,USB or RS485 input of a PCDIN rail mountable versionNo need for power supplyGalvanic isolationIP 20 protectionAPPLICATIONSCommunication interface (modem)between HART-capabletransmitters and PCMinimal system configuration:Windows XP, USB portCERTIFICATIONSATEXII (1) G [Ex ia Ga] IICSAK-305TYPE SAT – 304 SAK – 305InputHARTOutput USB USB / RS485 (HART over RS485)Power supplySupplied from USBSupplied from USB /24V DC (10-30 V)nominal voltageCurrent consumption< 100 mAUSB: current consumption < 60 mARS485: power consumption < 1.5 WAmbient temperature –25 °C… + 55 °C –20 °C … + 70 °CHousing material Polystyrene PPOConnection: USB 1.1 „B” socket USB 1.1 „B” socket / RS485 TerminalElectrical connectionPCHARTlineCable: USB „A-B” 1,8 mConnection: Test clipCable: spiral 0.6 m (1.1 m)USB „A-B” 1.8 m / RS485 Twistedshielded pair max. 1000 mScrew terminalTwisted shielded pair with0.5…2.5 mm 2 wire cross sectionResistance max. 75 Ohm,Capacitance max. 200 nFMechanical connection – DIN EN 50022-35 rail mountableIngress protection IP 20Electrical protectionClass III.Ex marking – ATEX II (1) G [ Ex ia Ga ] IICMass0.1 kgCOMPONENTSUNICOMM SAT-304SAT-304USB/HART converter for HART capable devicesConnection: USB 1.1 “B” connector and KLEPS 2Enclosure: polystyrol with IP20TYPEEx markingIntrinsically safe dataTypePrice in HRKS A T 3 0 4 1520,00UmUNICOMM SAK-305-6 ExII (1) G [ Ex ia Ga ] IICU i =30V, I i =100mA, P i =1W L i =200μH, C i =2nF253V ACUNICOMMSAT-304UNICOMM SAK-305HART communication modem for transmitters with HART outputConnection to PC: USB/RS485 interfaceDIN rail mountableEx marking: ATEX x II (1) G [Ex ia Ga] IICTypePrice in HRKS A K 3 0 5 2 2090,00S A K 3 0 5 6 Exia 2280,00NIV24SAT-304UNICOMMSAK-305164

SOFTWAREPROCESS VISUALIZATION SOFTWARENIVISIONGENERAL DESCRIPTIONNIVISION is a VISION X9 based process visualization software which uses the XSDL (Extensible Structure Declaration Language) programming and configuring language.NIVISION can visualize a process control system built with NIVELCO instruments on a PC. The instruments can either be intelligent transmitters with analogue output or digitalcommunication, or different switches based on different measuring principles. The tankpark layout with tanks, instrumentation and other process devices can easily be visualized.NIVISION offers a wide range of visualization elements of the measured and limit values, time based trends, databases and logs. Exporting and importing different database types isalso a basic feature of the software. A clear and transparent overview of all processes involved in an application makes stock and material management a simple task with a wellconstructed NIVISION project. Another great feature of the software is that a NIVISION project can be visualized on a remote computer (with no NIVISION installed) through a localarea network (LAN) or the Internet using an ordinary internet browser. It is a perfect solution for small and medium sized process control systems where setting up a SCADA systemis too expensive.MAIN FEATURESTank configurationTransmitter configurationTankpark visualizationDisplaying of measured valuesDisplaying of limit valuesTrend monitoringData loggingDatabase handlingArchivingOther log functions (alarms)Remote connection (LAN or Internet)APPLICATIONSThe steps of customizing NIVISION to a specific application:The end-user draws the technological, operational and functional requirementsof the application.Based on the customer's requirements the developer configuresthe visualization project in the NIVISION developer system graphicallyand makes the required programming. The developer system can onlybe accessed by the project developer.The finalized project can be executed by the end-user using the NIVISIONruntime system.The basic element of the software is the so called "UNIT" which containsthe applied instrument (with graphical representation), the instrument's variables,event handling, communication and data display. With the help of these unitsa complete process instrumentation system can be set up for visualization.NIVIS01NIVISION process visualisation, measurement logging and database managementFor MultiCONT and all NIVELCO transmitters with installation on-the-spotHardware requirements: PC with RS 232, RS 485 or USB port5 GB free space on hard discSupported operating system: Windows XPTypeNIVISION licence feeAPPLICATION DEVELOPMENTFor any process controlling task in accordance to order demands,in engineering work dayPrice on requestPrice on request165

TERMS AND CONDITIONSMAIN INFORMATIONThis Product Catalogue is valid from the 1 st of March 2013 and on that date all prior Product Catalogues loosevalidity.NIVELCO reserves the right to make any changes.The illustrations of the products in this Product Catalogue are only informative. A final check of specificationsin the data sheets, user’s and programming manuals is recommended.DELIVERYConcerning delivery time models are assigned to four different groups:Normal delivery: Standard products are usually manufactured within three weeks and shipped on the fourth week.* For non-standard products marked with " " or " ", a shipping delay of up to 6 weeks is to becounted with.Fast delivery: Units ordered under the NIVEX service are shipped within 5 working days from receiving the order if theorder is accepted. Before ordering products with the NIVEX marking (in capital letters), availability of therelevant products in the required quantity has to be checked and confirmed by the Order Desk ofNIVELCO. The NIVEX service is surcharged by 5% of purchase price. NIV24 service is available for models indicated in tables at the bottom right of the relevant price sheets.Products ordered with the remark NIV24 will be delivered latest 1 day after the order for a maximum of 5pieces. The NIV24 service is surcharged by 5% of purchase price.WARRANTY3 years warranty for all NIVELCO products. **ORDER CODES AND ARTICLE NUMBERSAll order codes for complete instruments have 7 characters (with some exceptions for special constructionsthat have 7 characters + “X…”). Order codes can be found in this Product Catalogue, coloured brochures,User’s and Programming Manuals and in other marketing documents on our website. Article numbers can befound in our Order Confirmations, Offers and Invoices. Article numbers have 8 characters and they areconstructed as the order code + “M” (in some cases this last character may be different). This distinctionbetween order code and article number has relevance only to NIVELCO’s internal administration but not to thetechnical content.e.g.order code: SGP-380-4article number: SGP3804MAPPROVALShttp://www.nivelco.com/site.php?upar=SHOW_QUALITY&lang=en* The indicated delivery time varies depending on the quantity ordered.** Except for analytical sensors!166

nikat13x0606b