weider pro 495 - Fitness Equipment

3. Attach the Front Leg (8) to the Frame (2) with twoM10 x 65mm Bolts (18), two M10 Washers (24),and two M10 Nylon Locknuts (19).319242181984. Tap three 45mm Square Inner Caps (21) into theindicated ends of the Leg Lever (4).Tap a 1Ó Round Inner Cap (23) into the indicatedend of the Weight Tube (52).Insert the Weight Tube (52) into the indicated holein the Leg Lever (4). Press a 1Ó Angle Cap (50)onto the indicated end of the Weight Tube.Press the Adapter Bushings (59) into the ends ofthe Weight Adapter (60) as shown. Slide theWeight Adapter onto the Weight Tube (52) andsecure it by pushing the Detent Pin (58) into theWeight Tube as shown.459216023525821421505. Lubricate an M10 x 72mm Bolt (53). Attach theLeg Lever (4) to the Front Leg (8) with the Boltand an M10 Nylon Locknut (19). Do not overtightenthe Nylon Locknut. The Leg Lever must beable to pivot freely.54198Attach the Narrow Spacer (30) to the Leg Lever(4) with the M8 x 58mm Bolt (49), two M8Washers (48), and an M8 Nylon Locknut (13).Note: The Spacer will fit tightly inside of theLeg Lever.49483053ÐLubricate48136. Attach the Frame (2) to the Lat Tower Base (35)with two M10 x 67mm Bolts (14), two M10Washers (24), and two M10 Nylon Locknuts (19).63514192427