DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

DSE 5xxx Configuration Software ManualNUMBER OF STARTSIt is possible to set the module number of starts counter to the required value, for instance if thecontrol system is to be used with an existing generating set, the starts reading can be transferredto the new control system, thereby maintaining the history of the generating set. Alternatively, thestarts counter on a new generator could be reset to zero following testing.TRANSDUCERS / EXPANSION TRANSDUCERSNOTE:- Transducer recalibration of Oil pressure and Coolant temperature senderswill have no effect on J1939 modules connected to engine ECUs.This option will allow the engineer to re-calibrate the module transducers and expansiontransducers such that it will read correctly the values. This action may be necessary as thesenders used for sensing the levels are electromechanical devices and as such suffer from adegree of inaccuracy. The ability to re-calibrate the senders is akin to turning the adjustment screwon a conventional engine gauge.CAUTION!: To re-calibrate the senders a known good, accurate sensing devicemust be used and the module reading adjusted to match.NOTE:- Expansion analogue inputs are only available on the 53xx controllers whenused in conjunction with the P130 input expansion module.DSE5xxx Configuration software ISSUE 2 02/07/04 AM 83