DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

More documents

Recommendations

Info

DSE 5xxx Configuration Software ManualTo Run 5xxx series configuration software For Windows programPress the : StartAnd then select ‘Programs’ -‘5xxx’as shown below:-8DSE 5xxx Configuration software ISSUE 2 02/07/04 AM
DSE 5xxx Configuration Software ManualThe screen will then display:-The password page will appear after a short delay.The software provides three levels of password protection. The first level is the operator level, ifthe operator password is entered it will only be possible to edit the Timers not the moduleconfiguration. In addition, operator level only allows the creation of new configuration files,existing files cannot be over-written. The second level of password protection is the technicianLevel, if this password is entered all of the module functions can be configured.The third level of password is the Engineer level, if this password is entered all of the modulefunctions can be configured, LOP and HET senders can be calibrated and the Module time, hoursrun clocks can be adjusted. Password for all levels can also be changed with this level.It is intended that the technician and engineering passwords be given to qualified engineers whoare responsible for initial configuration of the unit, or modification of settings at a later stage.DSE5xxx Configuration software ISSUE 2 02/07/04 AM 9
Page 1 and 2: DSE 5xxx Configuration Software Man
Page 58 and 59:
DSE 5xxx Configuration Software Man
Page 60 and 61:
Page 62 and 63:
Page 64:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87:
show all

DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

Create successful ePaper yourself

Delete template?

Save as template?