DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

More documents

Recommendations

Info

DSE 5xxx Configuration Software ManualLevels DescriptionGenerator VoltsAlarmsGenerator UndervoltageGenerator Over voltageFunctionThese settings are used to configure the generator under voltage alarm:-Shutdown - = Generator Under Volts will NOT give a Shutdown alarm = Generator Under Volts WILL give a shutdown alarm in the event ofthe generator output faling below the displayed ‘under volts trip’ value.The ‘under volts trip’ value can be adjusted to suit user requirements.Pre-alarm - = Generator Under Volts will NOT give a pre-alarm warning = Generator Under Volts WILL give a pre-alarm warning in the event ofthe generator output faling below the displayed ‘under volts pre-alarm’value. The ‘under volts pre-alarm’ value can be adjusted to suit userrequirements.Loading Voltage -This is the minimum voltage the generator must be operating at beforethe 52xx/53xx module will consider it available to take the load. It is alsothe voltage above the under voltage trip that the generator output mustreturn to before the 52xx/53xx module will consider that the supply isback with in limits. (I.e. With a UV trip of 184.0V and a UV return of207.0V, the output voltage must return to 207.0V following an undervoltage event to be considered within limits.)These settings are used to configure the generator over voltage alarm:-Pre-alarm - = Generator Over Volts will NOT give a pre-alarm warning = Generator Over Volts WILL give a pre-alarm warning in the event ofthe generator output rising above the displayed ‘over volts pre-alarm’value. The ‘over volts pre-alarm’ value can be adjusted to suit userrequirements.The voltage must return to below the ‘Over volts return’ seting before the52xx/53xx module will consider that the supply is back with in limits. (I.e.With a OV trip of 276.0V and a OV return of 253.0V, the mains voltagemust return to 253.0V following an over voltage event to be consideredwithin limits.)Shutdown -This is the setting at which a Generator Over Volts will give a shutdownalarm in the event of the generator output rising above the displayed ‘overvolts trip’ value. The ‘over volts trip’ value can be adjusted to suit userrequirements.46DSE 5xxx Configuration software ISSUE 2 02/07/04 AM
DSE 5xxx Configuration Software ManualEDIT GENERATOR FREQUENCY TABDSE5xxx Configuration software ISSUE 2 02/07/04 AM 47
Page 1 and 2: DSE 5xxx Configuration Software Man
Page 64: DSE 5xxx Configuration Software Man
Page 87: DSE 5xxx Configuration Software Man

DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

Create successful ePaper yourself

Delete template?

Save as template?