DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

DSE 5xxx Configuration Software Manual3.4 EDIT FRONT PANEL INDICATORSThis menu allows the configurable LCD indicators (52xx) or LED indicators (53xx) to be changedto suit the users requirements. The following is displayed:-(Typical Settings for information only);NOTES1:- Each of the four configurable LCD/LED indicators has the same selection of choicesas stated in the edit outputs section of this manual.2:- Each of the four configurable LCD/LED indicators can be set to any function,allowing for flexible configuration.3:- If expansion outputs are required to be fitted for indication purposes only, a plugin LED Expansion module type 548 is available to provide up to 8 configurable LED’s(+ Power On and Link Lost indicators). The 548 modules are fitted with a switchlabeled ‘A’ and ‘B’. With the switch in the ‘A’ position the 548 module wil respond tosignals for expansion relays 1 - 8 and iluminate the appropriate LED’s. With theswitch in the ‘B’ position the 548 module wil respond to signals for expansion relays 9- 16 and iluminate the appropriate LED’s – Only the 53xx module can provide outputcontrol.The 53xx module will also control a second output device (Expansion B) whereby theexpansion module’s selector must be in the ‘B’ position.NOTE:- In the ‘B’ position the 548 module wil ignore al signals from the 52xxmodule.36DSE 5xxx Configuration software ISSUE 2 02/07/04 AM