DEEP SEA ELECTRONICS PLC - Home Mega Global Solution

DSE 5xxx Configuration Software Manual3.2 EDIT CONFIGURABLE INPUTSThis menu allows the configurable inputs to be changed to suit the users requirements. Thefollowing is displayed: -3.2.1 EDIT MODULE INPUTS TABCUSTOM CURVE EDITORThis allows senders to be used which have not been pre-configured in the 5xxx software. Eachsender curve has 16 points which map the relationship between sender resistance and reading.Once the curve direction is started the curve must continue to folow the set direction – I.e. Ifresistance increases with rising oil pressure then each point on the graph must follow this. Soeach point must show a higher value than the one previous. If any two points on the graph areequal or reverse the initial direction the module will consider this the end of the curve and show‘over-range’ for values which are past this point.18DSE 5xxx Configuration software ISSUE 2 02/07/04 AM