Installation Manual MPT33 - Electro Mechanical Systems Ltd.

More documents

Recommendations

Info

Operating Instructions5.4 To fit the turnstile (above ground foundation)Fixing of the turnstile is done by means of the 8 fixing bolts M8 and plain washer. After final positioning tighten all bolts firmly.Note:1.Mark the dimensionsonto foundation acc. to fig.42. Drill3. Install turnstile4. screw together (see fig. 5.1Fig. 75.5 To fit the centre columnFig. 8581E,5811 10.03_MPT 33 10
Operating InstructionsFig. 9Mount the lower bearing on the foundation and stick the centre column on it.Fig. 10Fix the centre column by means of the delivered screws M16 at the top flange. Make sure the centre is in correct position (centre in locked position).581E,5811 10.03_MPT 33 11
Page 1 and 2: Operating InstructionsOperating Ins
Page 3 and 4: Operating Instructions2.3 Identific
Page 5 and 6: Operating Instructions4. Foundation
Page 7 and 8: Operating Instructions4.1 Foundatio
Page 9: Operating Instructions5.2 Fixing on
Page 13 and 14: Operating Instructions6. Electrical
Page 15 and 16: Operating Instructions7. Housings /
Page 17: Operating Instructions9. Commission
Page 20 and 21: Operating Instructions13. Control U
Page 22: Operating InstructionsDIP 5 Opening

Installation Manual MPT33 - Electro Mechanical Systems Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?