CrossWorks for ARM User Guide

•From the popup menu, click Verify File.•From the Verify File menu, select the type of file to verify.•In the Open File dialog, select the executable file to verify and click Open to verifythe file.CrossStudio supports the same file types for verification as it does for downloading,described above.Erasing target memoryUsually, erasing target memory is done automatically CrossStudio downloads aprogram, but you can erase a target's memory manually.To completely erase target memory, do the following:•In the Targets window, right click the target to erase.•From the popup menu, click Erase All.To erase part of target memory, do the following:•In the Targets window, right click the target to erase.•From the popup menu, click Erase Range.Target definition fileThe target interface information in the targets window is stored in an XML file calledthe target definition file.To change the target definition file used by the targets window, do the following:•From the Tools menu, click Options.•In the Environment Options, select the Target section.•Edit the Target definition file entry to change the path to the target definition file.•Click OK to apply the change, the targets window should load the new targetdefinition file.144 Chapter 12 CrossStudio Windows