CrossWorks for ARM User Guide

—or—•In the Targets window, click the target to connect.•On the Targets window tool bar, click the Connect button—or—•In the Targets window, right click the target to connect.•From the popup menu, click Connect—or—•In the Targets window, click the target to connect.•Type Ctrl+T, C.Disconnecting a targetTo disconnect a target, do one of the following:•From the Target menu, click Disconnect—or—•On the Targets window tool bar, click the Disconnect button—or—•Type Ctrl+T, D.—or—•Right click the connected target in the Targets window•From the popup menu, click Disconnect.Alternatively, connecting a different target will automatically disconnect the currenttarget connection.Reconnecting a targetYou can disconnect and reconnect a target in a single operation using the reconnectfeature. This may be useful if the target board has been power cycled or reset manuallyas it forces CrossStudio to resynchronize with the target.To reconnect a target, do one of the following:•From the Target menu, click Reconnect.—or—•On the Targets window tool bar, click the Reconnect button.—or—Chapter 12Targets window141