CrossWorks for ARM User Guide

variables, the range is the range of addresses used to store that data item. Theseranges are only available if the corresponding source file was compiled withdebugging information turned on: if no debugging information is available, therange will simply be the first address of the function or data item.•Size. The size, in bytes, that the code or data item covers. The Size column isderived from the Range of the symbol: if the symbol corresponds to a high-levelcode or data item and has a range, then Size is calculated as the difference betweenthe start and end address of the range. If a symbol has no range, the size column isleft blank.•Section. The section in which the symbol is defined. If the symbol is not definedwithin a section, the Section column is left blank.•Type. The high-level type for the data or code item. If the source file that definesthe symbol is compiled with debugging information turned off, type informationis not available and the Type column is left blank.Showing the Symbol Browser windowTo display the Symbol Browser window if it is hidden, do one of the following:•From the View menu, click Symbol Browser.—or—•Type Ctrl+Alt+Y.—or—•Right click the tool bar area to display the View menu.•From the popup menu, click Symbol Browser.Configuring the Symbol BrowserChoosing fields to displayInitially the Range and Size columns are shown in the symbol browser. You can selectwhich columns to display using the Field Chooser on the Symbol Browser tool bar.To select the fields to display in the Symbol Browser, do one of the following:•Click the Field Chooser button on the Symbol Browsertool bar.•Check the fields that you wish to display and uncheck the fields that you wish tohide.—or—•From the Tools menu, select Symbol Browser then Fields.Chapter 12Symbol browser135