User Guide Product(range) - Neopost

• the length of the document in the feeder ( ),• daily mail ( ) "on "or "off",• OMR (Optical Mark Reading) ( ) "on" or"off".• lift the document feeding tray upwards tounhook it and then pull it out from the feeder,3.5 Other jobSelect the desired job in the "Other job" menu.Confirm the job selection with "OK" which willget you back to the "main menu (1)".3.6 Main menu (2)Main menu (2) shows the following functions(see figure below):• reset count,• insert position,• job menu.3.7 Reset count menuAfter pressing key 1 in "main menu (2)", thecounter is set to zero.3.8 Adjustments for documentfeedingDocument separationThe document separation for the feeders is setautomatically.A• loosen knob B half a turn (see figure below),• grab the side guides C in the middle and pushthem outwards,• put a small stack of documents between theside guides,• grab the side guides in the middle and pushthem towards the documents,• The space between the side guides and thedocuments should be such that thedocuments have just enough play to movefreely,• re-tighten knob B,• remove the stack of documents.ENGLISHSide guidesTo adjust the side guides it is best to remove thedocument feeding tray as follows (see figurebelow):• push handle A downwards,CBReplace the document feeding tray as follows(see figure below):• place the document feeding tray under guideA,C9