User Guide Product(range) - Neopost

1. set number of documents per feeder ( ).The number of sheets per feeder can be setbetween 0 and 3. A feeder can bedeselected by setting the amount ofdocuments to zero. When a feeder is set todaily mail the amount of documents isalways 1.2. set document size ( ). The document sizecan be set between 90 mm (3.54 inch) and356 mm (14 inch) in steps of 1 mm (0.04inch). For the upper station of a 2,5 stationsystem the minimum height is 115 mm (4.60inch).3. set feeder swap ( ). When feeder swap isselected the following choices are available:• select the pair of feeders that need to belinked,• select linked or unlinked for a pair of feeders,• confirm the settings by pressing “OK” whichwill get you back to the “job settings” menu.When a pair of feeders is linked, the settingsof the lower feeder will be used and shown inthe display.4. set daily mail on or off ( ). When dailymail is selected the following choices areavailable:• set the daily mail function on or off,• confirm the settings by pressing “OK” whichwill get you back to the “job settings” menu.When there are conflicting job parameters amessage will be shown.5.3 Fold settingsWhen the “fold settings” menu is selected thefollowing choices are available (see figurebelow):1. no fold ( ). When no fold is selectedthere are no settings required.2. single fold ( ). When single fold is selectedand edit is pressed, the following choices areavailable:• move the fold position to the right,• move the fold position to the left,• confirm the settings by pressing “OK” whichwill get you back to the “job settings” menu.The fold length can be minimally 75 mm (2.95 inch)and maximally the length of the longest documentused minus 25 mm (1.0 inch).3. letter fold ( ). When letter fold is selectedand edit is pressed, the following choices areavailable:• select fold number,• move the position of the fold to the right,• move the position of the fold to the left,• confirm the settings by pressing “OK” whichwill get you back to the “job settings” menu.The fold length of the first fold can be minimally 75mm (2.95 inch) and maximally the length of thelongest document used minus 50 mm (2.0 inch).The fold length of the second fold can be minimallythe length of the first fold plus 25 mm (1.0 inch)and maximally the length of the longest documentused minus 25 mm (1.0 inch).4. double parallel fold ( ). When doubleparallel fold is selected and edit is pressed,the following choices are available:• select fold number,• move the position of the fold to the right,• move the position of the fold to the left,• confirm the settings by pressing “OK” whichwill get you back to the “job settings” menu.The fold length of the first fold can be minimally 75mm (2.95 inch) and maximally the length of thelongest document used minus 50 mm (2.0 inch).The fold length of the second fold can be minimallythe length of the first fold plus 25 mm (1.0 inch)and maximally the length of the longest documentused minus 25 mm (1.0 inch).5. zig-zag fold ( ). When zig-zag fold isselected and edit is pressed, the followingchoices are available:• select fold number,• move the position of the fold to the right,• move the position of the fold to the left,ENGLISH15