11.07.2015 Views

VALVES - Rutherford Equipment, Inc.

VALVES - Rutherford Equipment, Inc.

VALVES - Rutherford Equipment, Inc.

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>VALVES</strong>MOTOR FUEL SERVICE <strong>VALVES</strong> (continued)PV3250BC-312Service valve with built in 312 psi reliefvalve. For RV vapor tanks.Replacement Relief Valve Cover:U1062-168LMOTOR FUEL INTERNAL RELIEF <strong>VALVES</strong>DISCHARGEPIPEAWAYITEM# SIZE PSIG ADAPTORUV436BR 3/4” 312 436-21UV445AM 1” 250 445-21UV445AR 1” 312 445-21PV445AT 1” 375 445-21Motor Fuel Tank Valves, Relief & Vent ValvesLIQUID LEVEL VENT <strong>VALVES</strong>SJ400Used when a liquid level tube is welded invessel.DRILL SIZE ORIFICE: # 541/4” NPTREPLACEMENT STEM AND DISCASSEMBLY: 1F4595ME-J402SSame as SJ400 except it is stainless steel, andhas “T” handle that remains attached.J401Same as SJ400 except it has stop filling dial.J403SSame as J401 except it is stainless steel.MOTOR FUEL RELIEF <strong>VALVES</strong>ME-J410-120Same as SJ400 except it has a 12” dip tube.PV1855SD1 3/4” ACME X 3/4” NPT tank thread. FitsASME motor fuel tanks and DOT lift truckcylinders.REPAIR KIT: 1855-100-KITPV1855SD-3030° angle on the 1 3/4” ACME fillerconnection for easier connection.PV10ARFInstalled in motor fuel tank when remote liquidlevel gauge is required. Does not have #54orifice. Orifice must be in coupling.INLET: 1/4” NPTOUTLET: 1/4” OD flarePV10DRFSame as the PV10ARF except it contains a #54drill size orifice. Used where no orifice is providedin tank coupling.PV1855SPD3/4” FNPT X 3/4” NPT tank thread for useon ASME motor fuel tanks that requireremote filling.J415Installed on large bulk storage tanks at themaximum filling level.INLET: 3/4” MNPTOUTLETS: Two 1/4” FNPT side outletsPV1855SD-901/2” OD male flare X 3/4” NPT tank threadfor use on ASME motor fuel tanks thatrequire remote filling.J415-1J415 with 0-400 psig pressure gauge installed.J415-2J415 with 0-300 psig pressure gauge installed.- 10 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293


Liquid Level & Domestic Tank Valves<strong>VALVES</strong>LIQUID WITHDRAWAL <strong>VALVES</strong> AND ADAPTORSMULTI<strong>VALVES</strong>Liquid excess flow valve designed tobe installed into any liquid withdrawalopening.ITEM# INLET OUTLET CLOSING RATEPVE5136 3/4” MNPT 1 5/8” – 12UN 22 GPMPVE5137 1 1/4” MNPT 1 5/8” – 12UN 34 GPMAccessories - 5136-90ACap for PVE5136 & PVE5137PA51381 5/8” - 12UN X 3/4” FNPT AdapterPA51333/4” NPSM X 3/4” FNPTM455 (Fisher)PA5133M (sherwood)3/4” NPSM X 3/4” MNPTGaskets for above:5133-10 (Sherwood)ME4603/4" MNPT inlet x 1 5/8" UNF male outletliquid withdrawal tank valve with cap.SHERWOODPV2033CLDB1 1/4” Acme vapor return, fixedmaximum liquid level gauge and serviceshut off. Dip tube length: 15”. Unit hasa pre-tapped pressure test port. Withthe Presto Tap option, leak test can beperformed at the valve without breakingthe line.INLET: 3/4” MNPTOUTLET: FPOLVAPOR REPAIR KIT: 2033-100-KITBONNET ASSEMBLY: 6775-60-KIT ** To convert a standard bonnet valve toa dual bonnet, order kit # 3429-100-KITSHERWOODPV2098ACluster valve for ASME undergroundtanks with surface area up to 300 sq ft.<strong>Inc</strong>ludes filler valve, service valve, vaporreturn, relief valve, and outage valve.Unithas a pre-tapped pressure test port.INLET: 2 1/2” FNPTOUTLET: FPOLREGOR8593ARCombines filler valve, vapor return,service valve, fixed liquid levelgauge, and tapped and plugged gaugeboss.INLET: 1 1/2” MNPTOUTLET: FPOLbME461Replacement cap for ME460 andME462ME4621 1/4" MNPT inlet x 1 5/8" UNF maleoutlet liquid withdrawal tank valvewith capFILLER/VAPOR RETURN <strong>VALVES</strong>Double back check fillervalve.ME4581 5/8"-20 F. thread (inlet) x 3/4" FNPT(outlet) liquid evacuation couplingITEM# INLET OUTLET REPAIR KITPV623B 1 1/4” MNPT 1 3/4” ACME 623B-100-KITPV1855SD 3/4” MNPT 1 3/4” ACME 1855-100-KITReplacement partsME458-03 6/6 Nylon gasketME458-04 Nitrile/Buna-N O-ringCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 11 -


<strong>VALVES</strong>FILLER/VAPOR RETURN <strong>VALVES</strong> (continued)D138 and D139Single back check filler valve foruse with G series back check or amanual shutoff valve.Part# INLET OUTLETD138 2” MNPT 2 1/4” ACMED139 3” MNPT 3 1/4” ACMED140 and D141Double back check filler valve.Part# INLET OUTLETD140 2” MNPT 2 1/4” ACMED141 3” MNPT 3 1/4” ACMEPV1876Vapor return and excess flow valve hasupper positive back check valve.Attachment of the vapor hose couplingwith projecting nozzle opens the backcheck to permit flow in both directions.INLET: 3/4” MNPTOUTLET: 1 1/4” ACMED1134Locking cap for 1 3/4” ACME filler valves.UNLOADING ADAPTORSPV902 and PV903Emergency unloading adapter used toremove liquid from domestic tanks wherethe fill valve is attached to a tube thatallows withdrawal of liquid from the bottomof the tank.Part# INLET OUTLETPV902A* 1 3/4” Female ACME 3/4” FNPTPV903A** 1 3/4” Female ACME 3/4” FNPTPV903B 1 3/4” Female ACME 1/2” FNPT* PV902A is used on old style Sherwood 623A fill valves** PV903A is used on Sherwood 623B, 1825SD, andother brand valvesDOMESTIC TANK RELIEF <strong>VALVES</strong>Internal Spring Relief Valves250 psig for 250-1000 gallon tanksCapacity ReplacementPart # Inlet Tank Size CFM Air CapUV433AM 3/4” 250 gal 1970 433-45AUV443AM 1” 500 gal 2510 443-45AUV453AM 1 1/4” 1000 gal 4370 453-45AUV445AM 1” Vert 120 987 UEP16B85UK-LUniversal RaiN CapAn inexpensive, expendable relief valve cover thatfits virtually all popular sizes.Domestic Tank Valves & Relief ValvesDOMESTIC TANK RELIEF <strong>VALVES</strong> (continued)ASME AND DOT External Relief ValvesMNPT Capacity PSIG Pipeaway ProtectivePart # Inlet CFM Air Setting Adaptor CapH110-250 1/4” 310 250 –– P206H135-250 1/2” 594 250 P174 P206H160-250 3/4” 605 250 P174 P206H185-250 3/4” 2223 250 –– P145H110-312 1/4” 390 312 –– P206H135-312 1/2” 765 312 P174 P206H160-312 3/4” 765 312 P174 P206H173 3/4” 903 375 P174 P206PVE431TR 1” 1680 250 –– 433-45AHYDROSTATIC RELIEF <strong>VALVES</strong>PV3866TRUE INTERNAL RELIEF <strong>VALVES</strong>Bulkhead mounted double checkmanifold for dual tank installations.Check valves prevent flow from one tankto the other.CONNECTIONS: 3/8” OD male flareSTART TO DISCHARGE PRESSURE: 400psig450 PSIG RELIEF VALVERequired in liquid lines between positiveshut-off valves.H124 1/4” MNPTH144 1/2” MNPTH174 3/4” MNPTP206 Raincap for Fisher H124, H144and H174PV3865 1/4", 400 psiUAS10 Raincap for PV3865BOBTAIL AND TransportRelief ValvesFor 265 psig valves, change part#suffix to 265.Part # Mfg. Size Psig Cap WrenchH722-250 Fisher 2” 250 P297 P304H732-250 Fisher 3” 250 P298 P305- 12 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293


Relief & Internal Valves<strong>VALVES</strong>RELIEF <strong>VALVES</strong> FOR LARGE ASME TANKSPart #*2” INTERNAL SPRINGRELIEF VALVEMfg. Material SCFM Capacity 3” Pipeaway AdaptorH282-250 Fisher Brass 11,336 ME-P104-24* For 265# or 275# valve, change part# suffix to 265 or 275.Flange Type Fullinternal relief valveFor 3” modified and 4” flanges.Replacement for AC&F relief valves.Two required on 30,000 gal. tank.Part # Mfg. Tank Conn. SCFM Capacity Pipeaway Thread Size4MBF-A-250 BPS 3” Modified or 4” Flange 15452 4” FNPTRelief Valve Stack RaincapsProtection for vertical relief valveriser pipes.Part #Pipe SizeRC300-06 3/4”RC300-08 1”RC300-16 2”RC300-20 2 1/2”RC300-24 3”RELIEF VALVE FOR LIQUID SERVICE98H-30Used on relief and back pressure applicationsinvolving large propane pumping systems andvaporizers.Body size: 1” FNPTRelief pressure range: 70-140 psigRelief pressure setting: 100 psigLiquid Relief Capacity: 30.8 GPMDIAPHRAGM TYPE RELIEF <strong>VALVES</strong>1805 SeriesProtects piping downstream of a regulatorfrom excessive pressure.Body ReliefPart# Size Setting Range1805-18P 1” 20# 5-35#1805-19P 1” 35# 10-60#289 SeriesInstalls between large second stage regulator &burner to provide high capacity relief.Body ReliefPart# Size Setting Range289H/2 2” 1.5# .5 - 2.25#289L/21 1” 26” 14”- 40”289H/41 1” 2.75# 1 - 4.5#289H/42 1” 9.5# 4 - 15#INTERNAL <strong>VALVES</strong>C421 Series Internal ValveTwo outlets, bottom and side. Primarilyused on bobtails and transports. Eitherconnection can be used for truck filling orwithdrawal.Part # Closing Flow Inlet OutletC421-1615 150 gpm 2” MNPT 2” FNPTC421-1625 250 gpm 2” MNPT 2” FNPTC421-2425 250 gpm 3” MNPT 3” FNPTC421-2440 400 gpm 3” MNPT 3” FNPTGPM based on half coupling in vesselC407 Series Internal ValveFor va por line on bobtails , main valveon small pumping systems, or in-line installation.Valve has manual operating lever and Type P134fusible link.Part # Closing flow Inlet OutletC407-10-03 30 gpm 1 1/4” MNPT 1 1/4” FNPTC407-10-05 50 gpm 1 1/4” MNPT 1 1/4” FNPTC407-10-08 80 gpm 1 1/4” MNPT 1 1/4” FNPTGPM based on half coupling in vesselC427 Series Internal ValveStraight through single outlet valvefor use on bobtails, transports, stationarytanks, or in-line installations.Part # Closing Flow Inlet OutletC427-1615 150 gpm 2” MNPT 2” FNPTC427-1625 250 gpm 2” MNPT 2” FNPTC427-2425 250 gpm 3” MNPT 3” FNPTC427-2440 400 gpm 3” MNPT 3” FNPTC427-2450 500 gpm 3” MNPT 3” FNPTGPM based on half coupling in vesselC402 Series Internal ValveThree side outlet with integral strainer forpump protection. Can be used in bulkplants for cylinder filling and truck loadingfrom a single outlet.Part # Closing Flow Inlet OutletC402-1625 250 gpm 2” MNPT 2” FNPTC402-2425 250 gpm 3” MNPT 3” FNPTGPM based on half coupling in vesselC404-24Internal Valve3” single flange unit used on bobtails withdirect connected pumps.Part #Closing flowC404-2425 250 gpmC404-2440 400 gpmbCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 13 -


<strong>VALVES</strong>INTERNAL Valves (continued)C403-24Internal Valve3” double flange unit used on bobtails wherepump must be lowered to clear truck frame orother obstacles.Part #Closing flowC403-2425 250 gpmC403-2440 400 gpmT10561 - 3" Lower GasketIP8777 - 3” Upper Gasket pre 1990 constructionT13603 - 3” Upper Gasket post 1990 constructionC404-32Internal Valve4” flanged valve for transports andlarge storage tanks.Part # Closing flow OperationC404-3260 600 gpm cableC404-3280 800 gpm cableC404A-3260 600 gpm airC404A-3280 800 gpm airC404M-3260 600 gpm manualC404M-3280 800 gpm manual1P1107 - 4” Upper GasketT11182 - 4” Lower GasketINTERNAL VALVE ACCESSORIESAir OperatorsWhen air pressure is applied to the cylinder,the valve opens. Upon loss of air pressure,valve closes. See page 16 for air valves andtubing.ReplacesFisher Fisher Marshall Fits internalPart # Part # Part # valve(s)P614 P312 ME-208SF C404-32P623 P326-5 ME-207 C403-24P639 P326-6 ME-206 C401, C421, C427P613 P326-7 ME-207SF C404-24P389* ME-205 C407-10P631 Actuator kit for C407-10*Requires the installation of a B105A street tee and AT11403 1/8” fuse plug.1301FHigh Pressure regulator for use with nitrogensystems.INTERNAL Valve ACCESSORIES (continued)LATCH AND REMOTERELEASE MECHANISMPart #P650P163A(25’)P164A(50’)P314P315P134BACK CHECK <strong>VALVES</strong>Internal & Back Check ValvesWhen the valve’s operating lever is manuallyopened, the lever is automatically latched inthat position. The lever can be released from aremote location by pulling on a cable attachedto the pull ring, thus closing the valve. Thermalprotection is provided by a built-in fusibleelement.Part #Fits internal valve(s)P340 2” & 3” C401, 402, 407, 421, & 427P3411 1/4” C407Cable Control AssembliesAvailable to remotely open and close allFisher internal valves except 4” flangedsizes.Description<strong>Inc</strong>ludes primary control, 20’ cable, P134 fusiblelinks, return spring, and mounting hardwareAuxiliary cable releases that allow the internalvalve to be closed remotely from primary controlpoint40’ cable assembly attaches C404-32 operatinglever and Wheaton or Allegheny type primarycontrolRemote release handle with cable linkage formanually actuated 4” valvesFusible LinkBACK CHECK <strong>VALVES</strong> ALLOW FLOW IN ONLY ONE DIRECTION ANDARE NORMALLY CLOSED.G100 Series and a1700seriesUsed mainly in tank inlet connectionsavailable with metal to metal seat or softseat (positive shut-off).FlowPart # Inlet Outlet Seat Capacity MaterialG100 3/4” MNPT 3/4” FNPT metal 21 gpm brassA1725 3/4” MNPT 3/4” FNPT metal 21 gpm steelG101 1 1/4” MNPT 1 1/4” FNPT metal 55 gpm brassA1727 1 1/4” MNPT 1 1/4” FNPT metal 55 gpm steelG102 2” MNPT 2” FNPT metal 150 gpm brassG112 2” MNPT 2” FNPT metal 150 gpm steelA1728 2” MNPT 2” FNPT metal 150 gpm steelG109 2” FNPT 2” FNPT metal 150 gpm brassG104 3” MNPT 3” FNPT metal 250 gpm steelG105 2” MNPT 2” MNPT soft 137 gpmand 1 1/4 FNPT steelG106 3” FNPT 2” MNPT soft 254 gpm steelG107 3” MNPT 3” MNPT soft 254 gpm steeland 2” FNPTME-870S-24 3” FNPT 3” MNPT soft 449 gpm steel- 14 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293


<strong>VALVES</strong>Needle and Low Pressure ValvesNeedle ValvesLow Pressure valves (continued)bLOG LIGHTER <strong>VALVES</strong>Steel Needle ValvesPart#SizeNV02ANV02A-1NV02G1/4” FPT x 1/4” FPT Angle Valve1/4” MPT x 1/4” FPT Angle Valve1/4” FPT x 1/4” FPT Globe ValveBrass Needle ValvesPart#SizeR1224WSV332VA108Ball valves - low pressure1/4” MPT x 1/4” MPT1/4” FPT X 1/4” FPT1/8” MPT x 1/8” MPTPart#SizePV10ARF 1/4” Flare x 1/4”MPT, w/54 orificePV10DRF 1/4” Flare x 1/4” MPTPart# Description EscutcheonL102-803 1/2” Straight Valve ChromeL102-804PB 1/2” Straight Valve BrassL102-813 1/2” Angle Valve ChromeL102-814PB 1/2” Angle Valve BrassL102-827 10” Brass KeyWe stock valves manufactured by Jomar, Legend, and Rub. TheJomar valves have a ”T” style handle that can be removed andreversed to lock the valve. The Legend and Rub have a “teardrop”handle that allows for installation close to a wall or floor where “T”handle valves will not open or close because of interference withthe wall or door. The valves with a L prefix are available only fromLegend. The valves with a J prefix can be ordered from Rub bysubstituting an R for the J in the part number.FNPT X HOSE BARBCartonSidePart# Size Qty. TapL102-413 1/2” FNPT x 1/8” MNPT/Hose Barb 10 NOFNPT x FNPTFNPT X FLAREPart# Size Carton Qty. Side TapJ101-502 1/2” FNPT x 3/8” FL 14 NOJ101-503 1/2” FNPT x 1/2” FL 14 NOL102-118 3/4” FNPT x 1/2” FL 10 NOL101-504 3/4” FNPT x 5/8” FL 10 NOFLARE X FLAREPart# Size Carton Qty. Side TapJ101-601 3/8”FL x 1/2” FL 12 NOJ101-602 3/8” FL x 3/8” FL 12 NOJ101-603 1/2”FL x 1/2” FL 12 NOJ101-604 5/8” FL x 5/8” FL 12 NOJ102-402 3/8” FL x 3/8” FL 10 YESJ102-403 1/2” FL x 1/2” FL 12 YESJ102-404 5/8” FL x 5/8” FL 10 YESMNPT x FLAREPart# Size Carton Qty. Side TapJ101-702 1/2” MNPT x 3/8” FL 12 NOJ101-703 1/2” MNPT x 1/2” FL 12 NOJ102-413 3/4” MNPT x 3/8” FL 10 YESHEATER <strong>VALVES</strong>ANGLE HEATER <strong>VALVES</strong>Part#SizeME-90NL-02 3/8” x 1/4”ME-90NL-03 3/8” x 3/8”STRAIGHT HEATER VALVEPart#SizeME-82NL-02 3/8” x 1/4”Part# Size Carton Qty. Side TapJ101-402 3/8” FNPT 12 NOJ101-403 1/2” FNPT 12 NOJ101-404 3/4” FNPT 12 NOL102-105 1” FNPT 10 NOJ102-302 3/8” FNPT 10 YESJ102-303 1/2” FNPT 10 YESJ102-304 3/4” FNPT 10 YESVALVE GREASEQVA1262 oz. tube of Graphite Valve Grease- 20 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293


Meter Valves, POL & Quick Closing Connectors<strong>VALVES</strong> / connectorsLOCK WING METER <strong>VALVES</strong>BRASS <strong>VALVES</strong>Part#POL SWIVEL CONNECTORSMALE SWIVEL POLMALE SWIVEL POL withExcess Flow ValvePart# Male Outlet ExtrasMG1690* 1/4” NPT NONEMG1641* 1/4” NPT Soft “O” Ring NoseMG1613** 1/4” NPT NONE*725,000 Btu/hr excess flow capacity at 100 psig**1.8 GPM excess flow capacitySizeGV217-1/2 1/2”S80E41 3/4”BLACK IRON <strong>VALVES</strong>Part#SizeAYM560B-04 1/2”AYM560B-06 3/4”8509910 barrell lockLocks Meter Stop Valves.8610005 KeyExtra Key for 8509910 Lock.Part# Male Outlet Extras1685 1/4” NPT NONEMG1638 1/4” NPT Soft-Nose & 60 drill orificeME-M345 1/4” NPT 90° Angle OutletMALE POL w/ HANDWHEELw/ Soft “O” Ring NosePart # Male Outlet ExtrasMG1654 1/4”NPT Plastic HandwheelMG1654A 1/4” NPT Brass HandwheelMALE POL w/ Handwheeland Excess Flow ValvePart # Male Outlet ExtrasMG1653 1/4” NPT Plastic handwheelMG1653A 1/4” NPT Brass HandwheelMG1645 9/16”-18LH Plastic HandwheelMG1645A 9/16”-18LH Brass HandwheelGAS GRILL QUICK connect COUPLINGSTYPE 1 COUPLINGSMG1855-A03TYPE 1 COUPLING1/4” NPT x 1-5/16” ACMEConnects the grill regulator to the Sherwood3349 (Type 1) valves shown on pg 7. Providesup to 200,000 btu/hr excess flow protectionand thermal shutoff protection for grillcylinders.MG1850QCC ACME PURGINGCOUPLINGThe POL nipple of this coupling has anunthreaded outlet and does not have anexcess flow device. When it’s attached tothe 3349 valve, it holds the valve’s internalcheck valve open for easy purging.MG1899PQCC ACME ADAPTOR FORSTANDARD POL <strong>VALVES</strong>Install this UL listed adaptor into a standardPOL valve on a 20-lb cylinder and that valvecan then accept the Acme thread of theMG1851 QCC coupling. And because thisadaptor has an internal check valve, it givesthe standard POL valve the safety feature ofthe 3349 QCC valve.TYPE 2 COUPLINGSMale Quick-disconnect by1/4” MNPT PlugConnects the grill regulator to a quickdisconnectcylinder valve shown on page 8.5LPA8C5LPA11CSame as 5LPA8C but it has a check valve.5LP510BKQuick-Disconnect Adaptor for Standard POLValves.CCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 21 -

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!