Corona Catalog.pdf - Soto Nursery

CLOSED-BACK SHOVELSWeldedClosed-BackDesign• Extra-thick, 14-gauge tempered steel blade for maximum toughness• Closed-back design protects handle from mud and dirt build up• Baked finish protects against rust• Double rivets give greater strength• Sharpened blade edgePROFESSIONALCLOSED-BACK SHOVELSLIFETIMEWARRANTY4#2 Round Point Closed-Back Shovels• Round-head design for efficient penetration andbreaking of dense soilsSS 60000• 48" Long Northern Ash wood handleSS 60010• 30" Steel and Northern Ash wood D gripSS 60020• 48" Solid-core fiberglass handle with thick, moldedpoly jacket for maximum strength and long service lifeSS 60030• 30" Solid-core fiberglass D grip handle with thick, molded poly jacket#2 Square Point Closed-Back Shovels• Square-head design for efficient lifting and movingof loose material• Large, forward-turned steps prevent material fromspilling off rear of bladeSS 61000• 48" Long Northern Ash wood handleSS 61010• 30" Steel and Northern Ash wood D gripSS 61020• 48" Solid-core fiberglass handle with thick,molded poly jacket for maximum strengthand long service lifeSS 61030• 30" Solid-core fiberglass D grip handle with thick, molded poly jacketNursery/Garden Closed-Back Spades• Flat, wide, rectangular design for preparingplanting beds to a constant depth byturning the soil over in placeSS 63000• 48" Long Northern Ash wood handleSS 63010• 30" Steel and Northern Ash wood D gripClosed-Back Drain Spades• Tempered, round-nose, slightly cupped, 16" bladefor efficient digging of deep, round-bottom drainsand trenches• Sharpened blade edge penetrates ground easily,slices through small rootsSS 62000• 48" Long Northern Ash wood handle givesadded leverage for easier breaking ofdense, heavy soilsSS 62010• 30" Steel and Northern Ash wood D griphelps maneuver blade in deep trenchesSS 62020• 48" Solid-core fiberglass handle with thick, moldedpoly jacket for maximum strength and long service lifeSS 62030• 30" Solid-core fiberglass D grip handle with thick,molded poly jacketClosed-Back Drain Spades• Tempered, round-nose, slightly cupped, 14" bladefor efficient digging of deep, round-bottom drainsand trenches• Sharpened blade edge penetrates ground easily,slices through small rootsSS 62100• 48" Long Northern Ash wood handle gives addedleverage for easier breaking of dense, heavy soilsSS 62110• 30" Steel and Northern Ash wood D grip helpsmaneuver blade in deep trenchesSS 62120• 48" Solid-core fiberglass handle with thick, molded poly jacket formaximum strength and long service lifeSS 62130• 30" Solid-core fiberglass D grip handle with thick, molded poly jackethelps maneuver blade in deep trenches

HOLLOW-BACK SHOVELSLIFETIMEWARRANTYSteel collar forstrong connection• Contractor-grade fiberglass handles are 40% stronger than wood• Extra-thick, 14-gauge tempered steel blade for more toughness• Sharpened blade edge• Limited Lifetime Warranty#2 Round Point Hollow-Back Shovels• Textured epoxy finish protects head• Large, forward-turned steps for firmer footingSS 30020• 48" Fiberglass handle with cushiongrip for comfortSS 30030• 30" Fiberglass handle with co-moldedplastic D grip for comfort, grip helpscontrol material being moved, easierto use in close quartersCONTRACTORHOLLOW-BACK SHOVELS#2 Square Point Hollow-Back Shovels• Square-head design for efficient lifting andmoving of loose material• Textured epoxy finish protects headSS 31020• 48" Fiberglass handle with cushiongrip for comfortSS 31030• 30" Fiberglass handle with co-moldedplastic D grip for comfort, grip helpscontrol material being moved, easierto use in close quartersErgonomic, wideD grip for comfortRoofer’s Spade• Thick, 14-gauge tempered steel• Heavy-duty fulcrum welded to back of blade for leverage• Notched blade for efficient removal of shingles• Textured epoxy finish protects headSS 39000• 48" Long ash wood handleHeavy-dutyfulcrum weldedto back of bladefor leverage6

DIYHOLLOW-BACK SHOVELS#2 Round Point Hollow-Back Shovels• Strong, 16-gauge tempered steel blade• Round point allows easy penetration ofa variety of materials• Large, forward-turned steps forfirmer footingSS 26000• 48" Long ash wood handleSS 26010• 30" Ash wood handle with D gripSS 26020• 48" Fiberglass handle with cushion grip for comfortSS 26030• 30" Fiberglass handle with D grip for comfort, grip helps controlmaterial being moved, easier to use in close quartersHollow-Back Drain Spades• Tapered, round-nose, slightly cupped blade for efficientdigging of deep, round-bottom drains and trenches• Thick, 16-gauge tempered steel blade for long service life• Large, forward-turned steps for firmer footingSS 28000• 48" Long ash wood handleSS 28010• 30" Ash wood handle with D gripSS 28020• 48" Long fiberglass handleSS 28030• 30" Fiberglass handle with D grip for comfort, grip helps controlmaterial being moved, easier to use in close quartersMulti-Purpose Mini Shovel• Strong, 16-Gauge tempered steel blade• Forward-turned steps for firmer footing• D grip handle to help control materialbeing movedSS 25010Light-Duty Floral Shovel• Small 6" x 8" head design for easieruse in gardens and tight spacesSS 47000• 42" Long wood handle#2 Square Point Hollow-Back Shovels• Strong, 16-gauge tempered steel blade• Square-head design for efficient lifting and movingof loose material• Textured epoxy finish protects headSS 27000• 48" Long ash wood handleSS 27010• 30" Ash wood handle with D gripSS 27020• 48" Fiberglass handleSS 27030• 30" Fiberglass handle with D grip for comfort, grip helps controlmaterial being moved, easier to use in close quartersHollow-Back Garden Spades• Strong, 14-gauge tempered steel blade• Rounded edge penetrates ground easily, slicesthrough small roots• Textured epoxy finish protects headSS 29000• 48" Long ash wood handleSS 29010• 30" Ash wood handle with D gripSS 29020• 48" Fiberglass handleSS 29030• 30" Fiberglass handle with D grip for comfort, grip helps controlmaterial being moved, easier to use in close quarters#2 Round Point Light-Duty Shovel• Strong, 16-gauge tempered steel blade• Round point allows easy penetrationof a variety of materials• Large, forward-turned steps forfirmer footingSS 10000• 46" Long ash wood handle#2 Square Point Light-Duty Shovel• Square-head design for efficient liftingand moving of loose material• Varnished finish protects headSS 11000• 46" Long ash wood handleHOLLOW-BACK SHOVELSLIFETIMEWARRANTY7

35˚ FORHandle AngledatCLEANINGgeneralpurpose useTRENCHCLEAN-OUT SHOVELSTrench Clean-Out Shovels – 2"• 12-Gauge steel blade gives maximum strength• 1" Radius sides give blade structural strength,keep dirt in blade, prevent build up of dirt inblade corners• Extra-high back for added strength and longservice lifeSS 64002• 48" Long Northern Ash wood handle withoptimum lift angle cleans trenches efficientlyminimizes bending and reduces back strainSS 64022• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTrench Clean-Out Shovels – 3"• 12-Gauge steel blade gives maximum strength• 1" Radius sides give blade structural strength,keep dirt in blade, prevent build up of dirt inblade corners• Extra-high back for added strength and longservice lifeSS 64003• 48" Long Northern Ash wood handle withoptimum lift angle cleans trenches efficientlyminimizes bending and reduces back strainSS 64023• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTrench Clean-Out Shovels – 4"• 12-Gauge steel blade gives maximum strength• 1" Radius sides give blade structural strength,keep dirt in blade, prevent build up of dirt inblade corners• Extra-high back for added strength and longservice lifeSS 64004• 48" Long Northern Ash wood handle withoptimum lift angle cleans trenches efficientlyminimizes bending and reduces back strainSS 64024• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTRENCHING SHOVELSLIFETIMEWARRANTYTrench Clean-Out Shovels – 5"• 12-Gauge steel blade gives maximum strength• 1" Radius sides give blade structural strength,keep dirt in blade, prevent build up of dirt inblade corners• Extra-high back for added strength and longservice lifeSS 64005• 48" Long Northern Ash wood handle withoptimum lift angle cleans trenches efficientlyminimizes bending and reduces back strainSS 64025• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTrench Clean-Out Shovels – 6"• 12-Gauge steel blade gives maximum strength• 1" Radius sides give blade structural strength,keep dirt in blade, prevent build up of dirt inblade corners• Extra-high back for added strength and longservice lifeSS 64006• 48" Long Northern Ash wood handle withoptimum lift angle cleans trenches efficientlyminimizes bending and reduces back strainSS 64026• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeSharpened edge shaves trenchbottom smooth, prevents damageto installed pipes9

28˚ FORHandle AngledDIGGINGof trenches andgeneralpurpose useatTRENCHDIGGING SHOVELSTrench Digging Shovels – 3"• 13-Gauge steel blade gives maximum strength• V-angled head for efficient digging andcleaning of trenches• Color coded for quick identification of propertool for trench widthSS 64303• 48" Long Northern Ash wood handle withoptimum lift angle for efficient cleaning oftrenches minimizes bending and reducesback strainSS 64323• 48" Hollow-core fiberglass handle withcushion gripSS 64333• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTrench Digging Shovels – 5"• 13-Gauge steel blade gives maximum strength• V-angled head for efficient digging andcleaning of trenches• Color coded for quick identification of propertool for trench widthSS 64305• 48" Long Northern Ash wood handle withoptimum lift angle for efficient cleaning oftrenches minimizes bending and reducesback strainSS 64325• 48" Hollow-core fiberglass handle withcushion gripSS 64335• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTrench Digging Shovels – 4"• 13-Gauge steel blade gives maximum strength• V-angled head for efficient digging andcleaning of trenches• Color coded for quick identification of propertool for trench widthSS 64304• 48" Long Northern Ash wood handle withoptimum lift angle for efficient cleaning oftrenches minimizes bending and reducesback strainSS 64324• 48" Hollow-core fiberglass handle withcushion gripSS 64334• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTrench Digging Shovels – 6"• 13-Gauge steel blade gives maximum strength• V-angled head for efficient digging andcleaning of trenches• Color coded for quick identification of propertool for trench widthSS 64306• 48" Long Northern Ash wood handle withoptimum lift angle for efficient cleaning oftrenches minimizes bending and reducesback strainSS 64326• 48" Hollow-core fiberglass handle withcushion gripSS 64336• 48" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeTRENCHING SHOVELSLIFETIMEWARRANTY11

SCOOP SHOVELS#10 Aluminum Scoop Shovels• High-strength, heavy, 12-gauge aluminumhead reduces work load to a minimumwhile giving longer service life• Large, square-nose design for efficientmoving of light, loose materialSS 68000• 48" Long Northern Ash wood handleSS 68010• 30" Steel and Northern Ash woodD grip helps turn loosened soil,easier to use in close quartersSS 68030• 30" Solid-core fiberglass handle with thick,molded poly jacket for maximum strengthand long service lifeLIFETIMEWARRANTY#12 Steel Scoop Shovels• Large-capacity head is made of high-carbonsteel for longer service life• Western-style scoop head with reinforced ribsfor heavy-duty applicationsSS 69000• 48" Long Northern Ash wood handleSS 69010• 30" Steel and Northern Ash woodD grip helps turn loosened soil,easier to use in close quarters#12 Plastic Scoop Shovels• Heavy-duty gauge for greater strength andlong service life• Designed for efficient moving of light,loose material• Western-style scoop head with reinforcedribs for heavy-duty applicationsSS 42001• 48" Long wood handleSS 42011• 30" Wood D grip helps turnloosened soil, easier to usein close quartersErgonomic, widegrip for comfort#8 Steel Scoop Shovel• 11¼" x 13" steel head designed formultiple uses including street cleaningand snow material• Tempered steel head for greater strength andlong service lifeSS 49100• 48" Long wood handle12

Heavy-Duty Post Hole Digger –Hercules Pattern• Extra-heavy-duty, 10-gauge tempered steelheads for maximum strength and longservice life• Sharpened-blade edge for easy groundpenetration, slices through small roots• 48" Extra-thick ash handles for durability,longer service life and more elevated grip• Square-to-round connection betweenhandle and heads prevents twisting• Pivot point between blades optimallypositioned to allow wider opening• Replacement Handles AvailablePD 60000Heavy-Duty Post Hole Digger –Atlas Pattern, Fiberglass Handles• Heavy-duty, 12-gauge tempered steelheads for greater strength and longservice life• Sharpened-blade edge for easy groundpenetration, slices through small roots• 48" Hollow-core fiberglass handles forbest combination of weight and strengthand more elevated grip and durability• Ruler markings make gauging depth ofhole an easy taskPD 40020Square-to-roundconnection betweenhead and handlesprevents twistingHeavy-Duty Post Hole Digger –Atlas Pattern• Heavy, 12-gauge tempered steel blade forgreater strength and long service life• Sharpened-blade edge penetrates groundeasily, slices through small roots• Square-to-round connection betweenhead and handles prevents twisting• 48" Extra-thick Northern Ash wood handlesfor greater durability, long service life andmore elevated gripPD 40000POST HOLE DIGGERSLIFETIMEWARRANTYPost Hole Digger – Atlas Pattern• Heavy-duty, 14-gauge tempered steelheads for greater strength and longservice life• Sharpened-blade edge for easy groundpenetration, slices through small roots• 48" Extra-thick ash handles for durability,longer service life and more elevated gripPD 20000Light-Duty Post Hole Digger• 15-Gauge tempered steel heads for goodstrength and long service life• 48" Hardwood handles for durability, longerservice life and more elevated gripPD 1000013

RAKESLandscape RakesCorona®Aluminum Landscape Rakesare lightweight yet strong for use incommercial projects. The reinforcedsteel braces add support whensmoothing loose soil, gravel andother landscape materials.See the following pages for a completelisting of Corona® Rakes.Leaf, Shrub &Spring Brace RakesMade from tempered springsteel, which allows for greatermemory. The tines will revertback to their original shapefor a longer service life.Bow Head RakesUsed to move gardendebris, soil, fertilizer,small rocks and mulch.Level Head RakesUsed to move, leveland grade soil.14

Aluminum Landscape Rakes• All-aluminum construction combines durabilitywith ease of use during finish grading process• Angled, extra-thick tine tips for long service life• 60" Lightweight aluminum handle with anti-slipvinyl sleeve handle for gripping comfort inextreme heat or cold• Wrap-around brace support and heavy-duty headRK 61063 – 30"/30 TinesRK 61064 – 42"/42 TinesRAKESRK 61060 – 18"/18 TinesRK 61061 – 24"/24 TinesRK 61062 – 36"/36 TinesLevel Head Rakes• Wide head for rapid, accurate tillingand leveling• Extra-thick, tempered, single-piece headfor greater durability and long service life• Flat-head design for smooth tampingof seed beds• Narrow head enables soil preparation insmall spaces, between existing plantsRK 64002 - 16"/14 Tines• 60" Long Northern Ash wood handleallows working in upright position,reduces back strainRK 64022 - 16"/14 Tines• 60" Solid-core fiberglass handle with thick,molded poly jacket for maximum strengthand long service lifeLIFETIMEWARRANTYLevel Head Rake• 14" Level-head design for efficient,accurate tilling and leveling landscapematerials, small head is ideal forworking in close quarters• Extra-thick, tempered steel tines forgreater strength and long service life• Flat head with straight tines for smoothtamping of seed bedsRK 64060• 60" Aluminum, oval-shaped handle withvinyl coating is lightweight and shapedfor maximum strengthDirt/Asphalt Rake• Wide head for rapid, accurate tillingand leveling• Extra-thick, tempered steel head forgreater durability and long service life• Long, ½" thick shank reduces need fordownward pressure when moving rockand heavy soil• Flat-head design for efficient moving andleveling of landscape and road bedsRK 66000 - 16"/16 Tines15

RAKESFixed Tine Shrub Rakes• Tempered spring steel for greaterdurability and long service life• Bi-curved bow gives even pressure to alltines for maximum raking efficiency• Tines apply light pressure for debris removalwithout damage to plant feeder roots• Narrow head for working between closelyspaced plants• 2 Rivets hold head to handle• Double crimps hold tines in placeRK 62000• 54" Long wood handleRK 62060• 54" Lightweight metalhandle with anti-slipvinyl sleeved handlefor gripping comfort62000-8 – 8"/11 tines• Fixed tine shrub rake head19" Fixed Tine Leaf Rakes• Tempered spring steel for greaterdurability and long service life• Bi-curved bow gives even pressure to alltines for maximum raking efficiency• Tines apply light pressure for debris removal• 3 Rivets hold head to handle• 25 Extra-wide tines• Double crimps hold tines in placeRK 62001• 54" Long wood handleRK 62061• 54" Lightweight metalhandle with anti-slipvinyl sleeved handlefor gripping comfort62001-8 – 19"/25 tines• Fixed tine leaf rake headWide Head Leaf Rake – 30"• 30" Wide head for maximum leafgathering efficiency• Extra-thick vinyl with UV stabilizers forlong service life• Closely spaced, tightly curved tinessweep leaves clear in a single passRK 63003• 48" Long wood handleSpring Brace Rake• Fan-shaped head combines flexible tineswith durability of metal• Stress distribution bar that prevents tines fromtwisting or breaking when pressed on• Coated frame and tines resist rust• 54" Long wood handleRK 24002 – 22"/22 TinesRK 24003 – 24"/24 TinesLIFETIMEWARRANTYPoly Leaf Rakes – 42" HandleRK 25008 – 8"• 8" Poly head allows for rakingeasily between closelyspaced plantsRK 25018 – 18"• 18" Poly head allows for lightraking of leaves and plantsRK 25024 – 24"• 24" Poly head allows formedium-capacity leaf rakingand general cleanupSteel & Poly Lawn Rake• 22 Steel tines with coil spring brace• 48" Long wood handleRK 19000 – 20"/22 Tines16

Bow Head Rake• Tempered head for greater durabilityand long service life• Curved tines efficiently gather and move soil• Bow serves as spring for better controlof tine depth• 60" Extra-long ash wood handle allowsworking in upright position, reducesback strainRK 20002 – 16"/16 TinesRK 20022 – 16"/16 Tines• 60" Extra-long fiberglass handle withcushion grip allows working in uprightposition, reduces back strainLight-Duty Bow Head Rake• Tempered head for with 14 tines for greaterdurability and long lasting performance• Curved tines for easy penetration andgathering of soil• 48" Long wood handleRK 10000RAKESFORGED Bow Head Rakes• Tempered, single-piece head for greaterdurability and long service life• Curved tines efficiently gather and move soil• Bow serves as spring for better controlof tine depthRK 65001 – 14"/14 Tines• 60" Long Northern Ash wood handleallows working in upright position,reduces back strainRK 65021 – 14"/14 Tines• 60" Solid-core fiberglass handle withthick, molded poly jacket for maximumstrength and long service lifeRK 65002 – 16"/16 Tines• 60" Long Northern Ash wood handleallows working in upright position,reduces back strainRK 65022 – 16"/16 Tines• 60" Solid-core fiberglass handle withthick, molded poly jacket for maximumstrength and long service lifeLIFETIMEWARRANTYFORGED Bow Head Rake• 14" Bow-head design acts as spring forbetter control of tine depth, small head isideal for working in close quarters• Extra-thick, tempered steel tines forgreater strength and long life• Curved tines efficiently gather andmove soilRK 65061 – 14"/14 Tines• 60" Aluminum, oval-shaped handle withvinyl coating is lightweight and shaped formaximum strengthThatch/Groom Rake• Adjustable head adjusts up or down tosuit the height of the users• 15" Head width works on the push andpull motions for easier removal of thatchand dead grass• 54" Wood handle allows for working in anupright position and reduces back strainRK 4200017

HOES &CULTIVATORSGarden HoesUsed for cultivating soil, cleaningdebris between plants, weedingand light grading in tight spaces.CultivatorsTines have oval cross section foradded strength and are arrangedin a triangle for easier pullingthrough dense soil.Weeding HoeCorona®offers many different weeders,each designed to conquer differentgardening challenges. The popularOscillating Hoe automatically anglesslightly downward on both the forwardand back stroke to slice weeds justbelow the surface. Other specialtyweeders include the Diamond Hoe,Heavy-Duty Weeding Hoe and OneProng Cultivator.FORGED HEADSShaped from a solid rod of steel by the poundingand compressing with a forge hammer, whichprovides maximum strength and service life. Thisprocess yields a dense, uniform structure withthe greatest strength-to-weight ratio.18

FORGED Draw Hoe – 6¼"• Forged, tempered head for greater strength,long service life and superior blade sharpness• Sharpened-blade edge penetrates groundeasily, slices through weeds easily• Single-piece, solid-socket design preventsmoisture from weakening handle, givesgreater strengthFH 70000• 60" Long Northern Ash wood handle allows workingin upright position, reduces back strainFORGED Eye Hoes• Forged, tempered head for greater strength,long service life and superior blade sharpness• Sharpened-blade edge penetrates groundeasily, slices through weeds easily• Ox-eye connection to extra-thick handleFH 71002 — Eye Hoe 8½"• 60" Long Northern Ash wood handle withstandsheavy weed choppingHOESFH 71000Eye Hoe7"FH 71001Eye Hoe8"FH 71003Eye Hoe4½"Cotton Hoe• Tempered steel head for maximum strengthand long service life• Best for chopping, weeding and making furrowsSH 64000• 60" Long Northern Ash wood handle allows workingin upright position, reduces back strainGarden Hoe – 6"• Tempered steel head for strength and long life• Gooseneck design ideal for workingaround plants• 6" Wide blade most popular size for generalmaintenance tasksSH 60060• 60" Aluminum, oval-shaped handle withvinyl coating is lightweight and shaped formaximum strengthLIFETIMEWARRANTYGarden Hoe – 6"• Swan-shaped neck keeps soil from buildingup on the tool• Strong socket joint bolstered with a screw• Coated with a clear rust inhibitorSH 20000• 54" Long wood handle allows working in uprightposition, reduces back strainLight-Duty Garden Hoe• Swan-shaped neck keeps soil from buildingup on the tool• 51" Wood handle gives extra reach in the gardenSH 1000019

HOESOscillating Hoe• Lightweight: only 1.6 lbs• Sturdy, heat-treated carbon steel head• Concave blade stays sharp with useSH 15000• 54" Long hardwood handle with natural finishWarren Hoe• Tempered steel, 5" x 6" V-shaped head hassharpened edges for easier digging• 54" Wood handle allows working in an uprightposition, reducing back strainSH 22000Oscillating Hoes• Heavy-duty construction blade design for longservice life• Hoe automatically angles slightly downward onboth forward and back stroke to slice weedsjust below surface• Concave blade sharpens during use• 60" Long Northern Ash wood handle allowsworking in upright position, reduces back strainSH 60000 – SmallSH 60001 – LargeOscillating Hoe• Heavy-duty, double-edged blade for push-pullweed cutting• Hoe automatically angles slightly downward on bothforward and back stroke to slice weeds just below surface• Replaceable-head assembly for long lifeSH 60061• 60" Aluminum, oval-shaped handlewith vinyl coating is lightweight andshaped for maximum strength60061-8• Replacement head for SH 60061LIFETIMEWARRANTYDiamond Hoe• Diamond-shape head with four sharpenededges cuts weeds on both forward andback strokes• Points of diamond-shaped blade can nickeven small weeds from hard to reach areas• Easily sharpened carbon steel bladeSH 61000• 60" Long Northern Ash woodhandle allows working inupright position, reducesback strainHeavy-Duty Weeding Hoe• Tough, tempered, abrasion-resistant steel bladeholds edge• Notched and sharpened blade cuts on both push andpull stroke, slices easily through fibrous, overgrownweeds such as thistles, bindweed, wild mustard andclumping grassesSH 63000• 60" Long Northern Ash wood handleallows working in upright position,reduces back strainMortar Mixer Hoes• Tempered steel head for maximum strength,long service life• Wide, deep head with holes for efficientmixing of mortar, concrete and plaster,blending fertilizers and amendmentsinto soilSH 62000• 60" Long Northern Ash wood handle allowsworking in upright position, reduces back strainSH 62020• 60" Solid-core fiberglass handlewith thick, molded poly jacketfor maximum strength andlong service lifeMcLeod Hoe• Tempered steel tines for maximum strengthand long service life• Very versatile, used for raking, scraping,grubbing and tampingSH 65000• 48" Long Northern Ash wood handle allowsworking in upright position, reduces back strain20

Cultivators• Three sizes: 1, 3 and 4 prongs cover acomplete range of cultivating tasks• Tempered steel heads for superiorstrength and long service life• Gooseneck design ideal for workingaround plants• Diamond-shaped prong tips for easy soilpenetration and tillingCV 60061 – 1 Prong• 60" Aluminum, oval-shaped handle with vinyl coating islightweight and shaped for maximum strengthCV 60063 – 3 Prongs• 60" Aluminum, oval-shaped handle with vinyl coating islightweight and shaped for maximum strengthCV 60064 – 4 Prongs• 60" Aluminum oval-shaped handle with vinyl coating islightweight and shaped for maximum strengthCULTIVATORSFORGED Cultivator• Forged, tempered steel head formaximum strength and long service life• Narrow head works between closelyspaced plants• Prong tooth is split for easy pulling ofhard to reach weeds• Prong sides are sharp to allow slicing ofshallow rooted annual weeds• Tines have oval cross section for strength,reduced pulling effortCV 70001 – 1 Prong/Weeder• 60" Long Northern Ash wood handleallows working in upright position,reduces back strainFORGED Cultivators• Forged, tempered steel head formaximum strength and long service life• Tines have oval cross section for strength,reduced pulling effortCV 70003 – 3 Prongs• 60" Long Northern Ash wood handleallows working in upright position,reduces back strainCV 70004 – 4 Prongs• 60" Long Northern Ash wood handleallows working in upright position,reduces back strainLIFETIMEWARRANTYCultivator• Tempered steel head for maximumstrength and long service life• Welded tines have oval cross section forstrength, reduced pulling effort• Optimal choice for weeding andcultivating in one stroke• Sturdy, tough, multi-purpose tool withstrong ferrule socket connection to handleCV 20004 – 4 Prongs• 54" Long ash wood handleDandelion Weeder• Long reach weeder allows for digging outlong taproot weeds without creating alarge hole• 36" Wood handle allows for weedingwithout stoopingCV 2200021

FORKSLIFETIMEWARRANTYFORGED Spading Fork• Forged, tempered tines for maximum strengthand long service life• Tines are narrow and tapered for easier soilpenetration, yet extra thick to prevent splaying• Single-piece, solid-socket design preventsmoisture from weakening handle, givesgreater strength• Riveted connection keeps head securelymounted, prevents wobbleFK 70000 – 4 Tines• 48" Long Northern Ash wood handlegives added leverage for easierbreaking of dense, heavy soilsFK 70010 – 4 Tines• 30" steel and Northern Ash wood D gripmakes it easier to use in close quartersManure Fork• Tempered steel heads for superior strengthand long service life• 5-Tine configuration is ideal for lifting andtransferring materials• Oval tines for greater lifting strengthFK 72065 – 5 Tines• 54" Aluminum, oval-shaped handle withvinyl coating is lightweight and shaped formaximum strength16-Tine Rake ’n Fork• Tough, single-piece, molded ABS head holdsup better in wet, caustic environments thanmetal tine forks• Flexible tines readily penetrate debris pile forefficient lifting and moving• Cupped-head configuration holds materialbeing moved without spilling• Ideal around barns, corrals and landscape sites• Use as a rake to gather, then as a fork tomove materialFK 60000 – 16 Tines• 54" Long Northern Ash wood handleFORGED Hay Fork• Forged, tempered head for maximum strengthand long service life• Light- to medium-duty fork for moving loosehay, mulches, tree trimmings, landscape waste• Small head is ideal for denser, heavier material• Oval tines for greater lifting strengthFK 71003 – 3 Tines• 54" Long Northern Ash wood handleFK 71004 – 4 Tines• 54" Long Northern Ash wood handleFK 71005 – 5 Tines• 54" Long Northern Ash wood handleFORGED Manure Forks• Forged, tempered head for maximum strengthand long service life• Medium- to heavy-duty fork for movingmanure, compost, planting mix and otherdense, damp material• 4-Tine configuration is ideal for heaviesttasks such as turning compost heaps andtransferring fresh manure• Oval tines for greater lifting strengthFK 72004 – 4 Tines• 54" Long Northern Ash wood handleFK 72005 – 5 Tines• 54" Long Northern Ash wood handleDigging Fork• Tempered steel tines for maximum strengthand long service life• 10" Tapered tines for easier soil penetration• 29" Wood D handle grip makes it easier touse in tight spacesFK 42000 – 4 Tines• 29" Long wood D handleFORGED Ensilage Fork• Heavy-duty fork for moving ensilage,construction debris and similar materials• Forged, tempered steel head for greaterstrength, long service life• Closely spaced oval tines for maximumlifting capacityFK 74010 – 10 Tines• 30" Steel and Northern Ash wood D grip enablesmoving of heavy loads while keeping weight nearto body to prevent back strainFORGEDCottonseed/Vegetable Fork• Heavy-duty fork with closely spaced tines andelevated outer tines making scoop configurationideal for moving cottonseed, beets,carrots, stones and other similar material• Forged, tempered steel head for greaterstrength, long service life• Oval tines for greater lifting strengthFK 75010 – 10 Tines• 30" Steel and Northern Ash wood D grip enablesmoving of heavy loads while keeping weight nearto body to prevent back strain22

FORGED Michigan Axes• Forged, tempered steel head hardened formaximum strength, toughness, superiorwear, impact resistance, safety and longservice life• Extra-sharp, roll-ground and polishedblade edge, ready for use, cuts cleanerand with less effort• Ground butt end, or poll, for evendistribution of striking force when usedfor occasional light hammering of woodor plasticAX 70020• 34" Solid-core fiberglass handle with thick,molded poly jacket for maximum strengthand long service life• Dampens vibration from overstrikesto prevent breakageFORGED Pulaski RootGrubbing Tool• Extra-sharp axe blade with steep bevelangle to hold edge while cutting rootsin soil• Extra-sharp, triangular-shaped mattockblade for excavating along side andunderneath large rootsAX 71020• 34" Solid-core fiberglass handle with thick,molded poly jacket for maximum strengthand long service life• Dampens vibration from overstrikesto prevent breakageSTRIKING TOOLSFiberglass coreconsisting of millionsof continuous parallelglass fibersSOLID COREFIBERGLASSHANDLESNEW! FORGED Drilling Hammers• Minimize deflections and finish your workfaster with dual ground polished convexstriking faces• Your choice of naturally shock-absorbingHickory wood handles, or solid-corefiberglass handlesST 43003 – 3 lb• 16" Hickory wood handleST 73003 – 3 lb• 10 1 ⁄2" Fiberglass handleNEW! FORGED Sledge Hammers• Break through concrete, asphalt, masonry,or drywall… virtually any material, with durableforged, tempered steel heads• Minimize deflections and finish your work faster withdual ground and polished convex striking faces• Your choice of naturally shock-absorbing Hickorywood handles, or solid-core fiberglass handlesST 40004 – 4 lb ST 70020 – 4 lb• 16" Hickory wood handleST 40006 – 6 lb• 36" Hickory wood handleST 40001 – 8 lb• 36" Hickory wood handleST 40010 – 10 lb• 36" Hickory wood handleST 40012 – 12 lb• 36" Hickory wood handleST 40016 – 16 lb• 36" Hickory wood handleST 40020 – 20 lb• 36" Hickory wood handle• 15" Fiberglass handleST 70022 – 6 lb• 32" Fiberglass handleST 70021 – 8 lb• 32" Fiberglass handleST 70023 – 10 lb• 32" Fiberglass handleST 70024 – 12 lb• 34" Fiberglass handleST 70025 – 16 lb• 34" Fiberglass handleWARNINGSerious bodily injury or property damage couldoccur as a result of careless or improper useof these tool. Always inspect tools before use.Do not use if handles are loose or damaged orif these tool is chipped or cracked.Users and bystanders must wear eye andbody protection.LIFETIMEWARRANTY23

PICKS & MATTOCKSLIFETIMEWARRANTY24FORGED Railroad Pick - 5 lb• Forged, tempered steel head hardened formaximum strength, toughness, superiorwear, impact resistance, safety and longservice life• Point for fracturing rock and concrete• Chisel for smoothing of rough edges andlight prying• Head connected through eye hole allowingeasy replacement of headPM 73020• 36" Solid-core fiberglass handle withthick, molded poly jacket for maximumstrength and long service life• Dampens vibration from overstrikesto prevent breakagePM 40000• 36" Hickory wood handle with Poly GuardFORGED Cutter Mattock - 5 lb• Forged, tempered steel head hardened formaximum strength, toughness, superiorwear, impact resistance, safety and longservice life• Extra-wide mattock blade for moreefficient breaking of dense heavy soils• Extra-sharp cutter blade for severing roots• Head connected through eye hole allowingeasy replacement of headPM 75020• 36" Solid-core fiberglass handle withthick, molded poly jacket for maximumstrength and long service life• Dampens vibration from overstrikesto prevent breakagePM 42000• 36" Hickory wood handle with Poly GuardFORGED Pick Mattock - lb• Forged, tempered steel head hardened formaximum strength, toughness, superiorwear, impact resistance, safety and longservice life• Extra-wide mattock blade for moreefficient breaking of dense heavy soils• Point for fracturing, prying rock• Head connected through eye hole allowingeasy replacement of headPM 74020• 36" Solid-core fiberglass handle withthick, molded poly jacket for maximumstrength and long service life• Dampens vibration from overstrikesto prevent breakagePM 41000• 36" Hickory wood handle with Poly GuardHickory Handle for 6–16 lbSledgehammers40001-4Hickory Handle for 3 lbDrilling Hammer - 10"43003-4Hickory Handle for 4 lbSledgehammers - 14"40004-4Poly Guard Hickory Handle – 36"41000-4Hickory Wood Handle – 36"40000-4Solid-Core Fiberglass Handle – 36"73020-4FORGED Railroad Pick Head40000-8FORGED Pick Mattock Head41000-8FORGED Cutter Mattock Head42000-8WARNINGSerious bodily injury or propertydamage could occur as a result ofcareless or improper use of thesetool.Always inspect tools before use.Do not use if handles are loose ordamaged or these tool is chipped orcracked.Users and bystanders must wear eyeand body protection.

FORGED San Angelo Bar – 14 lb• Forged, tempered steel hardened forprying strength, toughness, safety andlong service life• Point for fracturing rock and concrete• Chisel edge for straight line concretebreaking, smoothing of rough edgesand pryingBR 70090FORGED Digging Bar – 17 lb• Forged, tempered steel, hardened forprying strength, toughness, safety andlong service life• Wide, thick blade for efficient digging indense, heavy and rocky soils• Tamp for compacting soils around fenceposts, forms, etc.BR 71090HEAVY BARSFORGED Wedge Point Bar – 18 lb• Forged, tempered steel, hardened forprying strength, toughness, safety andlong service life• 1.25" Wide head for better leverage andgreater impactBR 72090FORGED Pinch Point Crow Bar – 18 lb• Forged, tempered steel, hardened for pryingstrength, toughness, safety and long service life• Long, thick shank for maximum levering strength• Pinch-point design places fulcrum close toobject to be lifted, gives maximum leverageand enables lifting of objects from flat surfacesBR 73090LIFETIMEWARRANTYFORGED Landscape Bar – 32 lb• Forged, tempered steel, hardened forprying strength, toughness, safety andlong service life• Heavy-duty welded construction enablesmoving of large rocks and other extremelyheavy landscape elements• Large tamp, combined with weight ofbar, enables maximum compaction ofposthole and other landscape elementsBR 7409025

UTILITY TOOLSMeter Keys• Heavy-duty, all-steel construction• T bar gives maximum turning leverage• ½" or ³⁄4" Key for standard residentialshut off and sprinkler valvesUT 62050• Meter Key ½" – 29³⁄4"UT 62051• Meter Key ³⁄4" – 31³⁄4"Meter Key• All-steel construction for rugged useand long service life• High-quality welded construction forsuperior strength• 1¼" Slotted design best for turningmeter valves on and off• 2' Wide T handle with rubber grips forbest gripping control and easy twisting• 32" Long handles, perfect combinationof strength, weight and comfortUT 62055Man Hole Cover Hook• Forged, tempered steel for maximumstrength, long service life• Curved-head design enables removal andresetting of manhole covers by pullinginstead of prying• T bar construction allows grasping atshoulder with use of leg muscles formoving heavy manhole covers, reducespotential for back strainUT 63050Operating Wrench• Heavy-duty, heat-treated steel blade forlong service life, maximum strength• T bar gives maximum turning leverage• Extra-long 60" shaft to reach deeply setlines on commercial construction sites• 2.2" Key for larger capacity valvesUT 62052LIFETIMEWARRANTYDirt Tamp – 10" x 10" Plate• Heavy-duty, all-steel cast construction forlong service life• ¼" Steel plate face and gussets formaximum strength and even tamping• 10" Square face and 60" long shaft forefficient tamping of trenches, specimentree holes and base materialsUT 60053• 60" Northern Ash wood handleDirt Tamp – 8" x 8" Plate• Heavy-duty, all-steel cast construction forlong service life• ¼" Steel plate face and gussets formaximum strength and even tamping• 8" Square face and 42" long shaft forefficient tamping of trenches, specimentree holes and base materialsUT 60050• 42" Northern Ash wood handleDirt Tamp – 8" x 8" Plate• 8" x 8" Square is ideal for efficient tamping• High-quality welded construction will holdup to heavy use• Heavy-duty, all-steel cast construction forrugged use and long service life• ¼" Steel plate face and gussets formaximum strength and even tampingUT 60057• 58" Steel handle, perfect combination ofstrength and weight, will not break like woodDirt Tamp – 3½" x 12" Plate• 3½" x 12" Rectangle is ideal for tampingtrenches and tight spaces• Heavy-duty, all-steel cast construction forrugged use and long service life• ¼" Steel plate face and gussets formaximum strength and even tampingUT 60055• 58" Steel handle, perfect combination ofstrength and weight, will not break26

Heavy-Duty Sprinkler & Valve Key• All-steel construction for rugged use andlong life• High-quality welded construction forsuperior strength• 2-Prong design best for turning valveson and off• 14" Wide T handle with rubber grips forbest gripping control and easy twistingUT 61000• 48" Long steel handle, perfect combination ofstrength, weight and comfortFiberglass Probe with Metal Tip – 4'• Fiberglass for best combination of strengthand weight• Fiberglass model has replaceable steel tipfor long service life• 14" Wide T handle with rubber grips forbest gripping control and easy twistingUT 64020• 48" Long steel handle, perfect combination ofstrength, weight and comfortUTILITY TOOLSSteel Probe with Grips – 4'• All-steel construction for rugged use andlong life• Steel model uses high-quality weldedconstruction for superior strength• 14" Wide T handle with rubber grips forbest gripping control and easy twistingUT 64050• 48" Long steel handle, perfect combination ofstrength, weight and comfortSteel Head Trimmers• All-steel construction for rugged use and long life• High-quality welded construction for superior strength• Serrated cutting edges for easy cutting• 2 Sizes cover complete range of sprinkler heads• 14" Wide T handle with rubber grips for best grippingcontrol and easy twisting• 29" Steel T handle, perfect combination of strength,weight and comfort best gripping control andeasy twistingUT 66004 – 4" UT 66006 – 6"EZ Out• For extraction of broken nipples andrisers in irrigation systems• Unique design with serrated grippingsurfaces for superior grabbing power• 2 Tapered sizes cover full rangeof applications• All-steel body construction and zinc headfor rugged use and long life• Knurled, press-fit heads will not pullout or twist• Comfortable T-loop handle for ultimategripping power, good for all size hands• Handle loop can be used to insetlever bar, pipe or wrench handle forextra leverageUT 65001 – 1" & 1¼"UT 65002 – ½" & ¾"Post Drivers• Standard model comes in two sizes, 2½" and 3½" formost popular sized posts• Handles on standard models are angled for bestcontrol and more ergonomic gripping position• 65" Long reach model is ideal for driving post closeto ground level• All-steel construction for rugged use and long life• High-quality welded construction for superior strengthUT 67001• 2½" Inside diameterUT 67002• 3½" Inside diameterUT 67003• 2½" Inside diameter long reachLIFETIMEWARRANTY27

UTILITY TOOLSFORGED Sidewalk Scraper• Forged, one-piece tempered steel headfor maximum strength and durability• Beveled blade for efficient, heavy-dutyscraping resulting in cleaner surface• For removal of encrusted material fromhard surfaces• 48" Long Northern Ash wood handleUT 70000FORGED Scraper/Chopper• Forged, one-piece tempered steel headfor maximum strength and durability• Resharpenable blade for digging, edging,root chopping and sod cutting• 54" Long Northern Ash wood handleUT 71000½ Moon Edger• Semi-circular edging knife for straight,even edges and borders• Tempered steel blade and socket forlong life• Large forward-turned steps forfirmer footing• 48" Long wood handleUT 20000Dual Wheel Grass Edger• 6" Blade is self sharpening and has anadjustable depth gauge• Wide, dual treads for traction and easierhandling on concrete• 48" Wood handleUT 21000LIFETIMEWARRANTYGrass Whip• 9¼" Blade is serrated on both edges andcuts in either direction• 14" Wood handle• 24" Steel shaft• Double rivets securely hold blade tosteel shaft• Grass whip is used to trim tall grass andweeds around yardsUT 22000Weed Cutter• 14" Blade has serrations on each edgeand cuts in either direction• Blade is connected to handle withtwo bolts• 30" Wood handle• Weed cutter is used to trim tall grass andweeds around yardsUT 24000Sidewalk Scraper• Welded scraper is tempered for strength• Used for removing and chipping snowand ice off sidewalks and steps and asa light-duty foot edger for sidewalksand driveways• 48" Wood handle• 7" Wide blade with sharpened edgeUT 47000Concrete Spreader• Heavy-duty, 10-gauge tempered steelblade for long service life• Spreader grades, smooths and floatsconcrete for a smooth finish• 18" Wide blade for maximum efficiency• 60" Extra-long Ash wood handleCS 6000028

18" Landscape Broom – 3 Bristles• 18" Head concentrates pushing force, is ideal forgutters, walkways and stepping stones• Replaceable hardwood head with coarse poly, mediumsteel and medium, feathered poly bristles removesboth coarse and fine material in one pass• Scraper blade for removing congealed dirt, gum andother residues from concrete walks and pavers• Head is bolted to cast-metal socket, which is pinned tohandle, cannot twist loose like threaded handles• Steel braces prevent head wobble and uneven bristle wear• 60" Long wood handle18" Street Broom – 1 Bristle• 18" Wide head ideal for sidewalks, concrete slabsand floors• Replaceable hardwood head with coarse and mediumpoly bristles for efficient, single-pass removal ofunwanted material• Scraper blade for removing congealed dirt, gum andother residues from concrete walks and pavers• Head is bolted to cast-metal socket, which is pinned tohandle, cannot twist loose like threaded handles• Steel braces prevent head wobble and uneven bristle wear• 60" Long wood handleBROOMSBM 60001BM 6200124" Push Broom – 2 Bristles• 24" Wide head ideal for sidewalks, concrete slabsand floors• Replaceable hardwood head with coarse and mediumpoly bristles for efficient, single-pass removal ofunwanted material• Scraper blade for removing congealed dirt, gum andother residues from concrete walks and pavers• Head is bolted to cast-metal socket, which is pinned tohandle, cannot twist loose like threaded handles• Steel braces prevent head wobble and uneven bristle wear• 60" Long wood handle24" Push Broom – 1 Bristle• 24" Wide head is ideal for sweeping gutters, walkways,side walks, concrete slabs, floors and stepping stones• Replaceable hardwood head with medium, featheredpoly bristles removes both coarse and fine materialin one pass• Head is bolted to cast-metal socket, which is pinned tohandle, cannot twist loose like threaded handle• 60" Aluminum, oval-shaped handle with vinyl coatingis lightweight and shaped for maximum strengthLIFETIMEWARRANTYBM 61002BM 6206029

WHEELBARROWSCorona® Professional steel wheelbarrows feature a Quick Connect Systemfor faster assembly. Available with contractor grade hardwood handles forsuperior strength and steel handles with grips.The extra-heavy-duty, wrinkle-free steeltray has a solid bottom to resist corrosionand leaking. The solid bottom allows formixing and easy removal of material60" contractor-grade handlesSmooth, bolt-free,heavy-duty, corrosion-prooftray with UV protectionSteel braces provideadded strength whenpouring heavy loadsQuick Connect Systemfor faster assemblyWB 2506KReinforced legs provideadded strengthColor coded for inventory orselling purposes. Instructionsheets are bilingualKnobby tires for added tractionand longer wear include ballbearings and grease fittings(on all models)Flat-Free TiresAC 2500 — KNOBBYAC 2600 — RIBBED• Knobby tires provide added tractionand longer wear• Include ball bearings and grease fittingfor years of smooth performance30

6 Cubic Ft Heavy-Duty Steel Wheelbarrow –Wood Handles• 1.4 mm Wrinkle-free, extra-heavy-duty steel tray• Reinforced steel-front tray braces for added supportand stability• Ball bearings for years of smooth performance andgrease fittings for easy lubricating• 60" Contractor-grade hardwood handles• Quick Connect System for faster assemblyWB 2506K• 16" Wheel assembly withpneumatic, 2-ply tire foreasy maneuveringWB 2506KFF• Knobby flat-free tireprovides added tractionand longer wear6 Cubic Ft Heavy-Duty Steel Wheelbarrow –Steel Handles• 1.4 mm Wrinkle-free, extra-heavy-duty steel tray• Reinforced steel-front tray braces for added supportand stability• Ball bearings for years of smooth performance andgrease fittings for easy lubricating• 60" Superior-strength steel handles with comfort gripsQuick Connect System for faster assemblyWB 2606K• 16" Wheel assembly withpneumatic, 2-ply tire foreasy maneuveringWB 2606KFF• Knobby flat-free tireprovides added tractionand longer wearWHEELBARROWS6 Cubic Ft Poly Wheelbarrow –Wood Handles• Corrosion-proof poly tray with UV protection• Reinforced steel-front tray braces for added supportand stability• Ball bearings for years of smooth performance• 60" Hardwood handlesWB 1006• 16" Wheel assembly withpneumatic, 2-ply tire foreasy maneuveringWB 1006FF• Knobby flat-free tireprovides added tractionand longer wear10 Cubic Ft Poly Wheelbarrow –Dual Wheels, Wood Handles• Heavy-duty, corrosion-proof poly tray with UV protection• Reinforced steel-front tray braces for added supportand stability• 16" Dual-wheel assembly with pneumatic, 2-plyknobby tires provide added control and stability whencarrying heavy loads• Ball bearings for years of smooth performance• 60" Contractor-grade hardwood handlesWB 1010LIFETIMEWARRANTY6 Cubic Ft Steel Wheelbarrow –Wood Handles• 1.0 mm Wrinkle-free steel tray• Reinforced steel-front tray braces for added supportand stability• Ball bearings for years of smooth performance• 60" Hardwood handlesWB 2006• 16" Wheel assembly withpneumatic, 2-ply tire foreasy maneuveringWB 2006FF• Knobby flat-free tireprovides added tractionand longer wear31

HAND PRUNERSThere’s a Corona® pruner to meet virtually any need or cutting preference. The bladesand hooks on each of our bypass pruners are individually hand matched for precision,ensuring the closest, cleanest cuts with maximum cutting capacity.Hi-comfort textured gripincreases balance and controlBag ripper andwire cutter add utilityBP 6590Ergonomically designed lightweightaluminum handles reduce fatigueReplaceable high-carbonsteel SharpGard blade forlong-lasting, easy cuttingContoured handles withcomfortable non-slip gripsErgonomic angled pruning head for addedcomfort and reduced hand stressResharpenable, forged steel bladefor long service lifeBP 3640Forged high-carbon steelforms a stronger, moredurable cutting toolNarrow profile hook withself-cleaning sap groove32

FORGED Bypass Pruner• Forged steel alloy construction• 20° Angle cutting head reduces wrist fatigue• Integral shock absorbing bumper• Angle-mounted nickel plated high-carbon steelvolute springBP 6190FORGED Bypass Pruner• Fully heat-treated, forged steel alloy construction• Slant-ground, narrow-profile hook• Sap groove• Wire-cutting notchBP 3180CUTS UP TO:1inchDIAMETERCUTS UP TO:1inchDIAMETERFORGED Bypass Pruner• Forged-steel alloy construction• 20° Angle cutting head reduces wrist fatigue• Integral shock-absorbing bumper• Angle-mounted nickel plated high-carbon steelvolute springBP 6170CUTS UP TO:3/4inchDIAMETERFORGED Bypass Pruner• Lightweight forged aluminum construction• Easy to replace, high-carbon steel blade• Slant-ground, narrow-profile hook with self-cleaningsap groove• Shock-absorbing bumperBP 6250CUTS UP TO:1inchDIAMETERHAND PRUNERSFORGED Bypass Pruner• Specially designed for smaller hands• Resharpenable, forged, Radial Arc®bypass blade• Fully heat-treated, forged steel alloy construction• Slant-ground, narrow-profile hookBP 3130CUTS UP TO:1/2inchDIAMETERFORGED Bypass Pruner• Fully heat-treated, forged steelalloy construction• Slant-ground, narrow-profile hook• Sap grooveBP 3160CUTS UP TO:3/4inchDIAMETERLIFETIMEWARRANTYCUTS UP TO:FORGED Bypass Pruner3• Forged high-carbon steel forms a stronger, /4inchmore durable cutting toolDIAMETER• Resharpenable, forged steel blade for long service life• Ergonomic angled pruning head for added comfort andreduced hand stress• Contoured handles with comfortable non-slip gripsBP 3640FORGED Rolling HandleBypass Pruner1inch• Lightweight, forged aluminum constructionfor strength• Rolling handle designed to reduce cutting effortand hand fatigue• Geared pivot bolt permits precise blade adjustments• Replaceable, resharpenable high-carbon steel blade• Volute spring resists clogging and maintains smoothcutting actionBP 4840CUTS UP TO:DIAMETER33

HAND PRUNERSErgonomic Bypass Pruner• Lightweight pruner for general-purpose pruning• Resharpenable, high-carbon steel blade forlong service life• Ergonomic, reinforced nylon handlesBP 6590U.S Design PatentD585,250BP 4180CUTS UP TO:5/8inchDIAMETERErgoARC Bypass Pruner• Replaceable SharpGard blade for long-lasting, 1incheasy cutting• Bag ripper and wire cutter on blade add utility• Ergonomically designed handles reduce fatigue• Hi-comfort textured grip and forged aluminum handleincrease balance and controlCUTS UP TO:DIAMETERFORGED Bypass Pruner• Forged steel blade and hook 1inch• Ergonomically angled head for less bendingof the wrist• Bypass allows for close, cleaner and healthier cuts• Pivot boltBP 4220CUTS UP TO:DIAMETER• Cuts up to ³⁄4"BP 4240• Cuts up to 1"CUTS UP TO:FORGED Bypass Pruner• Lightweight forged aluminum handles 1inch• High-carbon steel blade and hookDIAMETER• Ergonomically angled head for less bending of the wrist• Bypass allows for close, cleaner and healthier cutsBP 4250Stainless Steel Bypass Pruner• High-carbon steel, fully heat-treated blade,hook and handle• Ergonomic, non-slip grip• Lightweight, easy to useBP 3120CUTS UP TO:3/4inchDIAMETERLIFETIMEWARRANTYNEW! Long Reach Pruner• Ideal for roses, shrubs, and trees 1 1 /4• Unlimited cutting positionsinch• Powerglide comfort grip eliminatestangled ropes• Oval grip with rubber overmold increases reachTP 3206CUTS UP TO:DIAMETERLong Reach Cut ’n Hold Pruner• Overall length of 46" allows reach tootherwise inaccessible areas• High-carbon steel blade and hook arefully heat treated• Blade is PTFE non-stick coated foreasier cutting• Adjustable foam grip provides balanceand ease of use• Cut ’n Hold feature holds stem untilyou release• Ergonomic co-molded handles for comfortLR 3460CUTS UP TO:1/2inchDIAMETER34

Custom Fit Bypass Pruner• High-carbon steel blade with PTFE non-stickcoating for less force to cut• 5 mm Hex key wrench for blade tension adjustment• Stainless steel, narrow-profile, slant-ground hookassures easy access to tight spotsAdjustable handles to fitlarge and small hands forgreater comfortSWITCHBP 3350Bypass Pruner• Bypass blade is high-carbon, fully heat-treatedsteel with a PTFE non-stick coating for durabilityand easy cutting• Hook is chrome plated to prevent corrosion• Narrow-profile hook and blade make cutting intight spaces easyCUTS UP TO:1inchDIAMETERCUTS UP TO:5/8inchDIAMETERCUTS UP TO:Bypass Pruner• Bypass blade is high-carbon, fully heat-treated 5/8inchsteel with a PTFE non-stick coating for durabilityDIAMETERand easy cutting• Lightweight, well balanced, designed for extended use• Hook and body are hard chrome and fully heat treated• Enclosed spring is protected from debris• Textured ergonomic grips for non-slip comfortable feelBP 3140Anvil Pruner• Resharpenable, high-carbon steel blade 3/4inch• Pistol grip• Vinyl-coated handles and concealed return spring• Chrome plated• Specially designed for pruning dry and woody growthAP 3110CUTS UP TO:DIAMETERHAND PRUNERSBP 2930Ratchet Pruner• Power multiplying ratchet action for easy cutting• Suitable for right and left hand use• Non-stick coated blade for smooth cutting andeasy cleaning• Specially designed molded grip fits all size handsRP 3230CUTS UP TO:3/4inchDIAMETERFORGED Two Handed Pruner• Lightweight, two-handed operation for 3/4incheasier cutting• Forged, resharpenable bypass blade and hook• Oval steel handles for greater comfort• Handle length - 11 1 ⁄4"BP 3225CUTS UP TO:DIAMETERLIFETIMEWARRANTYAnvil Pruner• Anvil blade with high-carbon, fully heat-treated 5/8inchsteel durability and easy cutting• Lightweight, well balanced, designed to fitcomfortably in hand• Specially designed for pruning dry and woody growthAP 2930CUTS UP TO:DIAMETER35

HEDGE SHEARSFrom the shaping of large shrubs and hedges, to the trimming of grassand other plants, Corona® meets the needs of professionals with adiverse line of innovative specialty shears built to exactingstandards of craftsmanship.Lightweight, high-strengthelliptical aluminum handlesResharpenable, forgedsteel alloy bladesForged-inbumper cups36Hedge shears have long blades that makeit easy to shape a hedge, encouraging atruncated wedge shape that is wider at thebottom than at the top. Whether your workdemands heavy-duty shearing, includingreclamation of overgrown hedges, or lightdutytip shearing and shaping, Corona® hasa hedge shear for the job.

FORGED Hedge Shears – Serrated Blade• 8" Resharpenable, forged steel alloy blades• Lightweight, high-strength ellipticalaluminum handles• Fully heat treated for strength• Serrated top blade and limb notch inlower blade• Forged-in bumper cups withShock Stop® bumperAH 6940 AH 6950• 13" handles, 8½" blade• 21" handles, 8½" bladeHEDGE SHEARSFORGED Hedge Shears• Resharpenable, forged steel alloy blades• Lightweight, high-strength ellipticalaluminum handles• Fully heat-treated for strength• Limb notch in lower blade• Forged-in bumper cups withShock Stop® bumperAH 6930 AH 6970• 7¼" handles, 8½" blade • 12½" handles, 10½" bladeFORGED Hedge Shears• Resharpenable, forged steel alloy blades• Bolted-on hardwood handles, comfortablenon-slip grips• Fully heat-treated for strength• Limb notch• Shock Stop® bumperHS 6960• 9½" handles, 10" bladeLIFETIMEWARRANTYFORGED Hedge Shears – Serrated Blade• Resharpenable, forged steel alloy blades• Bolted-on hardwood handles withnon-slip grips• Fully heat-treated for strength• Serrated top blade and limb notch inlower blade• Bumper cups with Shock Stop® bumperHS 6920 HS 6930• 9½" handles, 8½" blade • 20" handles, 8½" blade37

HEDGE SHEARSFORGED Hedge Shear• Resharpenable, forged steel alloy blades• Top-grade hardwood handles• Fully heat-treated for strength• Limb notch for larger branches• Comfortable non-slip gripsHS 3911• 9½" handles, 8¼" bladeHedge Shear – Serrated Blade• High-carbon steel blades are fully heat treated• Compound action multiplies your cutting power• Top blade is serrated to hold materials inplace during cutting• Bottom blade is PTFE non-stick coated foreasy, clean cuts• Top-quality hardwood handlesHS 3900• 11½" handles, 9¼" bladeHedge Shear – Extendable Handle• Lightweight aluminum handles areadjustable from 15" to 26"• Heat-treated, high-carbon steel blades fordurability and strength• Blades narrow at the tip for fine trimmingand shaping• Cushioned bumper and ergonomic gripsfor comfortHS 3930• 8¼" bladeExtends from 15" to 26"FORGED Hedge Shear – Extendable Handle• Lightweight steel handles with comfortgrips extend from 13" to 20"• Forged, high-carbon steel blades fordurability and strength• Shock Stop® bumper reduces armand shoulder fatigue• Precision-made pivot bolt providessmooth cutting actionHS 3950• 10" bladeLIFETIMEWARRANTYCompound Action Hedge Shear –Aluminum Handle• High-carbon steel blades are fully heat treated• Compound action multiplies your cutting power• Top blade is serrated to hold materials inplace during cutting• Bottom blade is PTFE non-stick coated foreasy, clean cuts• Lightweight, strong aluminum handles with ergonomic gripAH 4220• 11½" handles, 9" bladeExtends from 13" to 20"FORGED Hedge Shear• Lightweight aluminum handles withcomfort grips• Forged, high-carbon steel blades fordurability and strength• Shock Stop® bumper reduces arm andshoulder fatigue• Precision-made pivot bolt provides smoothcutting actionAH 4250• 11" handles, 8¼" bladeGear Action Hedge Shear –Aluminum Handle• High-carbon steel blades are fully heattreated for strength• Unique gear design multiplies yourcutting power• Bottom blade is PTFE non-stick coated foreasy, clean cuts• Lightweight, strong aluminum handles with ergonomic gripAH 4240• 11¼" handles, 10" blade38

FORGED Grass Shear• Professional scissor cutting action• Resharpenable, forged steel alloy blades• Fully heat-treated for strength• Comfortable, non-slip grip• Cuts tough sod and ground coverGS 6750GRASS SHEARSPROFESSIONAL SCISSOR CUTTING ACTIONPump Action Grass Shear• Professional scissor cutting action• Resharpenable, high-carbon steel alloy blades• Fully heat-treated for strength• Comfortable, non-slip grip• Cuts tough sod and ground coverLIFETIMEWARRANTYGS 3760Swivel Grass Shear• Versatile three-position blade Vertical for edging Horizontal for trimming Angled for hard to reach areas• Precision-ground, high-carbon steel blades• Durable chrome plating• Easy to set thumb lockGrass shears are versatile tools fortrimming grass, ground cover andsmall hedges and for trimming andedging along walks, beds and fences.GS 375039

LOPPERSFor trimming larger branches and limbs, Corona® gives you a choiceof conventional loppers with handles of lightweight, top-gradehickory wood, strong pultruded fiberglass or tubular steel.For even greater cutting capacity, select our compoundaction anvil and bypass models to get three timesthe cutting power of conventional loppers.Lightweight, high-strengthfiberglass handlesExtra-long, non-slipfoam gripsDual Arc blade designdramatically reducesforce to cutLightweight, high-strengthelliptical aluminum handles40

FORGED High-Performance Vine Loppers• Unmatched blade design dramaticallyreduces force to cut• Lightweight, high-strength ellipticalaluminum handles• Resharpenable, replaceable, Radial Arc®bypass blade of fully heat-treated forged steel• Forged, slant-ground hook with self-cleaning,deep sap groove• Nut-retaining clip prevents the nut from backing offAL 8310 – 16" AL 8320 – 19"CUTS UP TO:1 1 /4inchDIAMETEROrchard Loppers can cut upto 2¼ inches!FORGED High-Performance Orchard Loppers• Unmatched blade design dramaticallyreduces force to cut• Lightweight, high-strength ellipticalaluminum handles• Resharpenable, replaceable, Dual Arcbypass blade of fully heat-treatedforged steel• Forged, slant-ground hook with self-cleaning,deep sap groove• Nut-retaining clip prevents the nut from backing offAL 8441 – 26" AL 8461 – 32" AL 8481 – 36"ORCHARD & VINE LOPPERSLIFETIMEWARRANTYCUTS UP TO:2 1 /4inchDIAMETERPivot bolt system stayslocked in positionNut-retaining clip41

STRATASHEAR 3 ® LOPPERSFORGED Heavy-Duty Loppers withStrataShear3® Blade• Lightweight, high-strength ellipticalaluminum handles• Resharpenable, replaceable Radial Arc®bypass blade of fully heat-treated forged steel• Forged, slant-ground hook with self-cleaning,deep sap groove• Patented StrataShear³® blade technology• Forged-in bumper cups with Alcryn® bumpersAL 8260 – 32" AL 8240 – 26"CUTS UP TO:2 1 /4inchDIAMETERFORGED Heavy-Duty Loppers withStrataShear3® Blade• Lightweight, high-strength ellipticalaluminum handles• Resharpenable, replaceable Radial Arc®bypass blade of fully heat-treated forged steel• Forged, slant-ground hook with self-cleaning,deep sap groove• Patented StrataShear³® blade technology• Forged-in bumper cups with Alcryn® bumpersAL 8150 – 32" AL 8130 – 26" AL 8120 – 21"What is StrataShear³®?The StrataShear³® blade technology isthe first successful process that providesthe best of both worlds, unmatchedblade performance with long lastingproperties that dramatically reduce theforce to cut. This patented formula is ametal alloy and fluoropolymer combinationwhich reduces friction over the life ofthe blade.LIFETIMEWARRANTYCUTS UP TO:1 1 /2inchDIAMETERFORGED High-Density Vine Loppers withStrataShear3® Blade• Lightweight, high-strength ellipticalaluminum handles• Resharpenable, replaceable Radial Arc®bypass blade of fully heat-treated forged steel• Forged, slant-ground hook with self-cleaning,deep sap groove• Patented StrataShear³® blade technology• Forged-in bumper cups with Alcryn® bumpersAL 8040 – 26" AL 8020 – 19"CUTS UP TO:1inchDIAMETER42

FORGED Super-Duty Bypass Lopper• Resharpenable, replaceable Radial Arc®bypass blade of fully heat-treatedforged steel alloy• Heavy-duty, spring-loadedShock Stop® bumper• Eyelet for shoulder harness attachment• Tapered hickory hardwood handlesWL 6490 – 37"CUTS UP TO:3inchDIAMETERForged, slant-ground hookwith self-cleaning sap grooveFORGED Heavy-Duty Bypass Loppers• Resharpenable, replaceable Radial Arc®bypass blade of fully heat-treatedforged steel alloy• Precision-made, self-aligning pivot bolt• Forged-in bumper cups with Alcryn® bumpers• Tapered hickory hardwood handles• Comfortable, non-slip gripsWL 6481 – 36" WL 6461 – 32" WL 6431 – 26"CUTS UP TO:2 1 /4inchDIAMETERBYPASS LOPPERSNEW! FORGED Classic Bypass Loppers• Resharpenable, forged Radial Arc®bypass blade• Fully heat-treated steel alloy• Forged slant-ground hook with self-cleaningsap groove• Precision-made, self-aligning pivot bolt• Tapered, bolt-on Hickory handlesWL 6470 – 36" WL 6450 – 32" WL 6420 – 26"FORGED Bypass Loppers• Resharpenable, replaceable Radial Arc®bypass blade of fully heat-treatedforged steel alloy• Precision-made, self-aligning pivot bolt• Forged-in bumper cups with Alcryn® bumpers• Tapered, hickory hardwood handles• Comfortable, non-slip gripsWL 6381 – 30" WL 6361 – 26" WL 6341 – 22"CUTS UP TO:2 1 /4inchDIAMETERCUTS UP TO:1 1 /2inchDIAMETERLIFETIMEWARRANTYNEW! FORGED Classic Bypass Loppers• Resharpenable, forged Radial Arc®bypass blade• Fully heat-treated steel alloy• Forged slant-ground hook with self-cleaningsap groove• Precision-made, self-aligning pivot bolt• Tapered, bolt-on Hickory handlesWL 6370 – 30" WL 6350 – 26" WL 6330 – 22"WL 6310* – 20"Bypass Vine Lopper• Designed for light-duty, close-quarters cuttingof grape vines and dense shrubs or detailpruning of roses, patio trees and shrubs• Radial Arc® bypass blade for the cleanest,closest cut and longer edge retention• Tapered hickory hardwood handles,comfortable, non-slip gripsWL 6321 – 19"CUTS UP TO:CUTS UP TO:1 1 /2inchDIAMETER1inchDIAMETER*WL 6310 cuts up to 1 1/4"43

BYPASS & ANVIL LOPPERSLIFETIMEWARRANTYFORGED High-Torque Bypass Loppers• Maximum high-torque cutting action• Lightweight, high-strength ellipticalaluminum handles• Resharpenable, replaceable Radial Arc®bypass blade of fully heat-treatedforged steel alloy• Deeply curved, forged, slant-ground hookwith self-cleaning, deep sap groove• Forged-in bumper cups with Alcryn® bumpersAL 6511 – 26"Compound Action Bypass Lopper• Compound cutting action triples yourcutting power• Resharpenable, PTFE non-stick coatedhigh-carbon steel blade• Lightweight, strong aluminum handles• Ergonomic, co-molded gripAL 4110 – 28"CUTS UP TO:2inchDIAMETERCUTS UP TO:1 1 /2inchDIAMETERGear Action Bypass Lopper• Unique gear design multiplies yourcutting power• Fully heat-treated, high-carbon steelbypass cutting head• PTFE non-stick coated blade for easy,clean cuts• Lightweight, strong aluminum handleswith ergonomic gripAL 4130 – 26"CUTS UP TO:1 1 /2inchDIAMETERPower Bearing Anvil Lopper• Lightweight aluminum reinforced handles• High-carbon steel blade is fully heat-treatedand replaceable• Nylon serrated inset on hook provides extraholding power and prevents limb damage• Blade glides along stainless steel powerbearing for reduced friction, maximumshearing action and easy cutting• Replaceable, PTFE non-stick coated blade eases cutAL 3390 – 32"CUTS UP TO:1 1 /2inchDIAMETERPower Bearing Bypass Lopper• Lightweight, aluminum reinforced handles• High-carbon steel blade is fully heat treated• Blade glides along steel power bearing forreduced friction and easy cutting• PTFE non-stick coating for easy, clean cutsAL 3341CUTS UP TO:1 1 /2inchDIAMETERCompound Action Bypass loppers• Compound action multiplies yourcutting power• Resharpenable, PTFE non-stick coatedblade for easy, clean cutting• Solid wood handles with comfortable grips• Bypass cutting head is fully heat-treatedhigh-carbon steelWL 3370 – 29"CUTS UP TO:1 5 /8inchDIAMETER44

FORGED Bypass Loppers• Resharpenable, forged Radial Arc®bypass blade• Drop-forged, high-carbon steel alloy• Precision-made, self-aligning pivot bolt• Precision-forged, slant-ground hook withsap relief• Comfortable, non-slip grips and ferruleare co-molded to handleFL 3410 – 26"CUTS UP TO:1 1 /2inchDIAMETERExtendable Handle Compound ActionBypass Lopper• 4-Bar compound linkage triples yourcutting power• Resharpenable, PTFE non-stick coated,high-carbon steel bypass blade• Slant-ground hook with sap groove• Foam grips for comfortFL 3470 – 21"– 33"Compound Action Bypass Lopper• 4-Bar compound linkage triples yourcutting power• Resharpenable, PTFE non-stick coated,high-carbon steel bypass blade• Slant-ground hook with sap groove• 24" Fiberglass handles• Extra-long 8" non-slip foam gripsFL 3460 – 32"CUTS UP TO:1 1 /2inchDIAMETERExtendable Handle Compound ActionAnvil Lopper• Fully heat-treated cutting head• PTFE non-stick coated blade foreasy, clean cuts• Lightweight, strong fiberglass handlesextend from 21" to 33"• Compound action multiplies yourcutting powerFL 3450 – 21"– 33"BYPASS & ANVIL LOPPERSCUTS UP TO:1 1 /2inchDIAMETERHandles extendfrom 21" to 33"CUTS UP TO:1 1 /2inchDIAMETERLIFETIMEWARRANTYLightweight,strong fiberglasshandles extend21" to 33"Compound Action Anvil Lopper• 4-Bar compound linkage triples yourcutting power• Resharpenable, PTFE non-stick coatedhigh-carbon steel anvil blade• 24" Fiberglass handles• Replaceable blade and anvil• Extra-long 8" non-slip foam gripsFL 3420 – 32"CUTS UP TO:1 1 /2inchDIAMETER45

BYPASS LOPPERSFORGED Bypass Lopper• Resharpenable, forged Radial Arc®bypass blade• Drop-forged steel alloy• Precision-made, self-aligning pivot bolt• Precision-made, slant-ground hook withsap groove• Top-grade hickory handlesWL 3351 – 26"CUTS UP TO:1 1 /2inchDIAMETERBypass Lopper• Resharpenable, precision-ground,high-carbon steel blade• Precision-made pivot bolt• Tubular steel handles• Shock Stop® bumper• Comfortable, non-slip gripsSL 3310 – 24"Bypass Ratchet Lopper• Ratchet action is ideal for cutting largebranches or for people with limitedarm strength• Lightweight, high-strength elliptical aluminumhandles with non-slip grips• Resharpenable bypass blade for continuous,smooth, easy cuttingRL 3560 – 26"LIFETIMEWARRANTYCUTS UP TO:1 1 /2inchDIAMETERCUTS UP TO:1 1 /2inchDIAMETERFORGED Bypass Lopper• Resharpenable, forged carbon steelbypass blade• Self-aligning pivot bolt• Lightweight, high-strength aluminumhandles with non-slip grips• Shock Stop® bumperSL 4150 – 29"FORGED Super-Duty Bypass Lopper• Resharpenable Radial Arc® bypass bladeof fully heat-treated steel alloy• Heavy-duty, spring-loadedShock Stop® bumper• Precision-made, self-aligning pivot boltSL 6500 – 32"CUTS UP TO:1 1 /2inchDIAMETERCUTS UP TO:3inchDIAMETER46

PRUNING SAWSCorona® Pruning Saws are designed to be as comfortable in yourhand as they are effective in the field. Folding saws combinefast cutting with carrying ease. Bow saws offer increasedcutting capacity and lighter weight. For cleaner,smoother, faster cutting, choose any of theProfessional Corona Razor Tooth® Saws.Cuts twice as fast asconventional saws!Each whetstone-ground razor toothis sharpened on three sides for ablade that cuts twice as fast asconventional saws3-sided Razor Teethfor efficient cutting onthe pull strokeLocks in openedor closed positionFor faster, smootherand cleaner cuts!Ergonomicallydesigned, comfortable,co-molded handle47

PRUNING SAWSFolding Razor Tooth® Pruning Saw• For small to medium branches• 3-Sided razor teeth for efficient cutting• Impulse-hardened teeth for long service life• Curved-blade design for faster cutting• Replaceable, curved, taper-ground folding blade• Ergonomically designed, comfortable, co-molded handleRS 7245 – 7" bladeRS 7255 – 8" bladeRS 7265 – 10" bladePROFESSIONALEach whetstone-ground razor tooth is sharpenedon three sides for a blade that cuts twiceas fast as conventional saws.Razor Tooth® Pruning Saw• For medium to large branches• 3-Sided razor teeth for efficient cutting• Impulse-hardened teeth for long service life• Replaceable, taper-ground blade• Ergonomically designed, comfortable, co-molded handleRS 7360 – 10" bladeRS 7370 – 12" bladeCurved Razor Tooth® Pruning Saw• For large branches• 3-Sided razor teeth for efficient cutting• Impulse-hardened teeth for long service life• Replaceable, curved, taper-ground blade• Ergonomically designed, comfortable, co-molded handleRS 7395 – 14" bladeLIFETIMEWARRANTYACCESSORIESScabbards• Lightweight and high-strength reinforcednylon construction• Protects saw blade when not in use• Waistband clip and belt loop optionAC 7400 – For use with RS 7395,RS 7385, RS 7120 & RS 7130AC 7370 – For use with RS 7370AC 7360 – For use with RS 736048Razor Tooth® Raker Saw• For large branches and limbs• 3-Sided razor teeth• Self-cleaning raker tooth pattern• Impulse-hardened teeth for long service life• Tempered-steel alloy• Precision-milled, laminated wood D handleRS 7160 – 21" bladeRaker tooth patterncreates the fastest cuttinghand saw available

Curved Pruning Razor Tooth® Saw• For medium to large branches• 3-Sided razor teeth for efficient cutting• Impulse-hardened teeth for long service life• Replaceable 13" blade• Convenient hanging holeRS 7130 – 13" blade• Precision-milled, wood, pistol-griphandle with finger hookRS 7120 – 13" blade• Cushioned, co-molded pistol gripFolding PruningRazor Tooth® Saw• For small to medium branches• 3-Sided razor teeth for efficient cutting• Impulse-hardened teeth for long service life• Replaceable 7" blade• Cushioned, pistol-grip handle• Convenient hanging holeRS 7041 – 7" bladePRUNING SAWSFolding Pruning Razor Tooth® Saw• For medium to large branches• 3-Sided razor teeth for efficient cutting• Impulse-hardened teeth for long service life• Replaceable, steel alloy folding blade• Comfortable, precision-milled hardwood handle• Convenient hanging holeRS 7060 – 10½" bladeFolding Razor Tooth® Saw• Cuts faster and cleaner than conventional saws• Curved-blade design for faster cutting• Razor teeth are sharpened on three sides• Cushioned, pistol-grip handle• Positive blade locks open and closeRS 4040 – 6½" bladeLIFETIMEWARRANTYRazor Tooth® Pruning Saw• For large branches and limbs• 3-Sided razor teeth• Impulse-hardened teeth for long service life• Precision-milled, laminated wood D handleRS 7500 – 18" bladeACCESSORIESRazor Tooth® Saw Blade• For small to medium branches• 3-Sided razor teeth• Impulse-hardened for long service life• 7" Taper-ground blade• Fits Corona Model RS 7041AC 7041ACCESSORIESLeather Scabbard• For use with RS 7130, RS 7120, RS 7385,RS 7395 and all-purpose saws• Top grain leather construction• Stitched and riveted for durabilityAC 730049

PRUNING SAWSFolding Pruning Saw• For small to medium branches• Tempered steel alloy folding blade• Curved-glade design for faster cutting• Six precision-ground teeth per inch• Rigid, precision-milled hardwood handlePS 7020 – 14" bladeFolding Pruning Saw• For small to medium branches• Folding blade• Curved-blade design for faster cutting• Tempered steel alloy blade• Six precision-ground teeth per inch• Comfortable, hardwood handlePS 4050 – 10½" bladeFolding Pruning Saw• For small to medium branches• Folding blade• Curved-blade design for faster cutting• Tempered steel alloy blade• Seven precision-ground teeth per inch• Comfortable, hardwood handlePS 4040 – 8" bladeLIFETIMEWARRANTYRaker Tooth Pruning Saw• Designed to cut live, green wood• For large branches• Laminated hardwood D handle• 20" Blade with self-cleaning raker tooth pattern• Curved-blade design for faster cutting• Tempered steel alloy blade• 4 Precision-ground teethPS 4081 – 20" bladeBow Saw• Replaceable blade with self-cleaning raker tooth pattern• Lightweight, tubular steel frame• High-grade steel alloy blade• Hard-point teeth for longer service life• Safety tension leverBS 4030 – 30"BS 4020 – 24"50Root & All-Purpose Saw• For medium to large roots and small branches• Cuts on both the push and pull stroke• Aggressive tooth-sharpening pattern for faster, easier cuts• Precision-made 7 teeth per inch on high-carbon steel blade• Hard, chrome-plated, taper-ground blade• Ergonomic, co-molded, solid Corobond handle forcomfort and strengthRC 4060 – 6½" bladeBS 4010 – 21"ACCESSORIESScabbard• For use with RC 4060 Root andAll-Purpose Saw• Fiberglass-reinforced, lightweight nylonconstruction for strength and durability• Protects saw blade when not in use• Special UV inhibitors prevent materialfrom deterioration in direct sun• Saw locks in positionAC 7230

Machete – 18"• Tempered steel blade for greater strength and longservice life• Heat treated to achieve maximum blade flexibility• Resharpenable blade extends through the handle• Polished and varnished surface• Co-molded handle with anti-slip materialMA 60041MACHETESCane Knife – 14"• Tempered steel blade for greater strength and longservice life• Heat treated to achieve maximum blade flexibility• Resharpenable blade extends through the handle• Hook on blade allows pulling cane after it has been cutMA 61040Machete – 22"• Tempered steel blade for greater strength and longservice life• Heat treated to achieve maximum blade flexibility• Resharpenable blade extends through the handle• Polished and varnished surface• Co-molded handle with anti-slip materialMA 60042LIFETIMEWARRANTYCorn Knife – 18"• Tempered steel blade for greater strength and longservice life• Heat treated to achieve maximum blade flexibility• Resharpenable blade extends through the handleMA 62040ACCESSORIESMachete Scabbard• Stitched and riveted for durability• Belt clip and loops included• Universal design fits most machetes(machete not included)AC 7310 fits 18" MacheteAC 7330 fits 22" Machete51

TREE PRUNERSDual Compound ActionArborist Tree Pruning System – 12'• Compound-action, dual-pulley system triples yourcutting power• Forged steel alloy, Radial Arc® blade with 1¾" diametercutting capacityDual Compound ActionArborist Tree Pruning System – 12'• Fully heat-treated, forged steel hook• 16" Razor Tooth® Saw blade and quick connect ferrule• Two six-foot-high strength fiberglass pole sections can becombined or used separately with saw and pruning headSaw blade and mounting ferrule alsoavailable separately as AC 7672TP 6881Dual Compound Action Tree Pruner – 14'• High-strength zinc alloy pruning head• Fully heat-treated, high-carbon, PTFE non-stick coatedcutlery steel blade with 1¼" diameter cutting capacity• Heavy-duty chain drive, compound-action pulley systemtriples your cutting power• Exclusive Powerglide® rope pull systemDual Compound Action Tree Pruner – 14'• Curved 13" Razor Tooth® Saw• 3-Sided razor saw teeth cut twice as fast asconventional blades• Lightweight fiberglass pole telescopes from 7' to 14'with twist lock adjustment• Comfortable 28" foam gripTP 6870LIFETIMEWARRANTYDual Compound Action Tree Pruner – 14'• High-strength zinc alloy pruning head• Fully heat-treated, high-carbon, PTFE non-stick coatedcutlery steel blade with 1¼" diameter cutting capacity• Heavy-duty chain drive, compound-action pulley systemtriples your cutting powerDual Compound Action Tree Pruner – 14'• Exclusive Powerglide® rope pull system• 13" Conventional saw• Lightweight fiberglass pole telescopes from 7' to 14'with twist lock adjustment• Comfortable 28" foam gripTP 6850Dual Compound Action Tree Pruner – 12'• High-strength zinc alloy pruning head• Fully heat-treated, high-carbon, PTFE non-stick coatedcutlery steel blade with 1¼" diameter cutting capacity• Durable rope drive, compound-action pulley systemtriples your cutting power• Exclusive Powerglide® rope pull systemDual Compound Action Tree Pruner – 12'• Curved 13" Razor Tooth® Saw• 3-Sided razor saw teeth cut twice as fast asconventional blades• Lightweight fiberglass pole telescopes from 6' to 12'with twist lock adjustment• Comfortable 24" foam gripTP 683052

Dual Compound Action Tree Pruner – 12'• Die-cast zinc alloy pruning head• Fully heat-treated, high-carbon, PTFE non-stick coatedcutlery steel blade with 1" diameter cutting capacity• Compound-action pulley system triples yourcutting power• Pass-through shearing actionDual Compound Action Tree Pruner – 12'• 15" Conventional saw blade• Lightweight fiberglass pole telescopes to 12'• Comfortable, non-slip 24" cushioned grip, weatherresistantpolypropylene pull rope and wood gripTP 3841TREE PRUNERSCompound Action Tree Pruner – 10'• Die-cast zinc alloy pruning head• Fully heat-treated steel blade with 1" diametercutting capacity• Pass through shearing actionCompound Action Tree Pruner – 10'• 15" Conventional saw blade• Lightweight fiberglass pole telescopes to 10'• Weather-resistant polypropylene pull rope and wood gripTP 3811Extendable Pole – 14' (Shown with AC 7610)• Lightweight, strong fiberglass pole extends from 7' to 14'• Internal stop prevents inner pole separating from outer pole• Comfortable, easy to operate “twist lock” assembly• Use with AC 7610 Razor Tooth® Saw bladeEP 3700LIFETIMEWARRANTYDual Compound Action Tree Pruner – 14''• High-strength aluminum alloy head for maximumstrength-to-weight ratio• Large 1¼" cutting capacity easily handles small tomedium sized branches• Exclusive Powerglide® pulley system for smooth action• Fully heat-treated, high-carbon steel blade holds theedge and extends service lifeDual Compound Action Tree Pruner – 14''• Convertible action pulley system converts from compoundto direct pull by connecting the rope directly to the lowerpulley, giving workers a choice between faster cutting orless required force• PTFE non-stick coated blade for smooth cutting action• Lightweight, telescoping fiberglass pole reduces fatigueand extends from 7' to 14'TP 585053

TREE PRUNERSNEW! Extendable Tree Pruner• Unlimited cutting positions• Powerglide comfort grip eliminates tangled ropes• Lightweight and easy to use• Extendable from 7 ft. to 12 ftNEW! Long Reach Pruner• Ideal for roses, shrubs, and trees• Powerglide comfort grip eliminates tangled ropes• Lightweight and easy to useEW! Extendable Tree Pruner• Oval grip with rubber overmold increases reach• Detachable saw for light-duty trimming• Positive lock system eliminates pole slippagewhen extendedPruning saw includedfor large branchesNEW! Long Reach Pruner• Unlimited cutting positions• Oval grip with rubber overmold increases reachCUTS UP TO:1 1 /4inchDIAMETERTP 3212CUTS UP TO:1 1 /4inchDIAMETERTP 3206Fixed Fiberglass Poles• 1¼" Diameter most popular size for headsand accessories• Hollow-core fiberglass ideal combination of strength andweight, lightweight yet extremely durableFP 3008 – 8' FP 3010 – 10'FP 3012 – 12' FP 3014 – 14'Fixed Fiberglass Poles• Clear coat finish resists weather and provides smoothcomfortable surface• Bright red color makes them easy to spot, reduces“left behind” toolsLIFETIMEWARRANTYDual Compound ActionTree Pruner Head• High-strength zinc alloy head for maximumstrength to weight ratio• Large 1¼" cutting capacity easily handlessmall to medium sized branches• Exclusive Powerglide® pulley system forsmooth action• Fully heat-treated, high-carbon, PTFE nonstickcoated steel blade holds the edgeand extends service lifeDual Compound ActionTree Pruner Head• Convertible-action pulley system convertsfrom compound to direct pull, givingworkers a choice between faster cuttingor less required force• PTFE non-stick coated blade for smoothcutting actionAC 9000Tree Pruner Arborist Head• High-strength aluminum casting for ruggedtree care service, lightweight and strong• Large cutting capacity cuts limbs up to1¼" in diameter• Heat-treated alloy steel blade for maximumstrength and durabilityTree Pruner Arborist Head• Resharpenable steel blade to maintainoptimum performance and extend life• Non-binding swivel pulley for more leverageand less pressure on the pulley armAC 930054

Tree Pruner Saw Head• High-strength aluminum head for maximumstrength-to-weight ratio• Universal head connector easily mounts 1¼"round wood or fiberglass poles withoutan adapter• Optimal double-curved hook ideal for pullingbranches, raising lines and guiding tree fallFemale Ferrule• High strength-to-weight ratio aluminumferrule is corrosion resistant• Zinc plated spring clip also providecorrosion resistance• Fits 1¼" fiberglass polesAC 9500Tree Pruner Saw Head• Utility loop used for attaching ropes,carabineers and for easy storage• Universal saw blade mounting systemdesigned to fit an assortment of Corona®blades and most other brandsAC 9100Male Ferrule• High strength-to-weight ratio aluminumferrule is corrosion resistant• Fits 1¼" fiberglass polesAC 9510TREE PRUNERSAdapter• Aluminum, seamless tubular adapterwith eyelet to anchor pruner rope• Aluminum provides corrosion resistance• Fits 1¼" fiberglass polesAC 9550Tree Pruner Direct Connect Adapter• High-strength aluminum tube with wood plug• Simple design is lightweight and strong• Universal connector designed for attachingsaw blades to wood and fiberglass poles• Hole pattern fits Corona blades AC 9010,9020 and most other brandsAC 9200LIFETIMEWARRANTYProfessional Tree Pruner Head• Used with TP 68816880-855

SAW BLADESRazor Tooth® Folding Saw Blade – 7"• For small to medium branches• 3-Sided razor teeth• Impulse-hardened for long service life• 7" Taper-ground blade• Fits Corona® Model RS 7041AC 7041Razor Tooth® Saw Blade &Mounting Ferrule for TP 6881 – 16"• 16" Razor Tooth® Saw blade cuts twice as fast• 3-Sided, impulse-hardened razor teeth• Quick connect ferrule• Fits Corona® TP 6881 13' Arborist Tree Pruning SystemAC 7672Razor Tooth® Saw Tree Pruner Blade – 13"• 13" Razor Tooth® Saw blade cuts twice as fast• 3-Sided, impulse-hardened razor teeth• Curved, tempered steel alloy blade• Fits most competitors heads and Corona® ModelsTP 3811 and TP 3841AC 7240Razor Tooth® Saw Tree Pruner Blade – 13"• 13" Razor Tooth® Saw blade cuts twice as fast• 3-Sided, impulse-hardened razor teeth• Curved, tempered steel alloy blade• Fits Corona® TP 6870, TP 6850, TP 6830, TP 3811and TP 3841AC 7241LIFETIMEWARRANTYRazor Tooth® Saw Tree Pruner Blade – 12"• 12" Razor Tooth® Saw blade cuts twice as fast• 3-Sided razor teeth• Curved, tempered steel alloy blade• Fits most competitors heads and all Corona® ModelsAC 7242Conventional Saw Tree Pruner Blade – 17"• Tang design and universal hole pattern fits directly topoles or adapters• Integral hook shape for pulling branches for trees• High-carbon tempered steel alloy blade for strengthand long edge life• Precision tooth pattern for excellent cutting efficiency• Connector sold separately (AC 9200)AC 9010Razor Tooth® Saw Tree Pruner Blade – 17"• Tang design and universal hole pattern fits directly topoles or adapters• Integral hook shape for pulling branches for trees• Triple-edged patented tooth design cuts twice as fastas conventional blades• Impulse-hardened razor tooth blade stayssharper longer• Connector sold separately (AC 9200)AC 9020Razor Tooth® Saw Blade – 16"• For use with EP 3700• Razor tooth® design cuts twice as fast asconventional saws• 3-Sided, impulse-hardened razor teethAC 761056

HAND & GARDEN TOOLSEasier gardening is within your grasp.Corona® has applied the lessons learned from many seasonsof field experience to create a series of gardening toolsespecially designed for your use. Their lightweight, one-piecestructures won’t bend, break or rust. Their larger diameter,contoured and cushioned grips are comfortable to handle.Designed to maximizepower and comfortTapered tines movethrough soil easilyThe most comfortablegrip in the garden!Serrated edge for cuttingroots and forked tipfor easy weeding

HAND & GARDEN TOOLSMattocks• All-steel construction for rugged use and long life• High-quality, welded construction for superior strength• Rubber grips on handles for comfortable anti-slip grip• 3 Models cover wide range of applicationsHT 69100• Planting mattock — single sidedwith shovel point bladeHT 69200• Bedding mattock — two sided withwide and narrow bladesHT 69300• Cultivating mattock — fork on oneside, blade on otherComfort Trowel• Wide 3" blade• Lightweight, one-piece, polished aluminum alloy• Cushioned Comfort Tool gripCT 3010iComfort Transplanter• Narrow profile ideal for flower pots• Marked and graduated for depth• Lightweight, one-piece, polished aluminum alloy• Cushioned Comfort Tool gripCT 3020iComfort Cultivator• 3 Rigid tines penetrate hard ground• Lightweight, one-piece, polished aluminum alloy• Cushioned Comfort Tool gripCT 3030iLIFETIMEWARRANTYPlanting Mattock• Tempered steel holds edge and is easily sharpened toassist in better penetration of soils• Unique head design enables rapid setting of both 4"and pony pack plants• Light but durable welded construction for long service life• Thick-walled poly grip absorbs impact vibration,reduces hand and joint strainHT 650503-Tine Comfort Fork• 3 Rigid, straight tines to penetrate ground• Lightweight, one-piece, polished aluminum alloy• Cushioned Comfort Tool gripCT 3040iComfort Weeder• Ideal for digging or weeding• Lightweight, one-piece, polished aluminum alloy• Cushioned Comfort Tool gripCT 3050i58

Extendable Handle Tools• Strong, lightweight steel handle adjusts from 18" to 32"for extra reach• Head is fully heat-treated for enhanced durability• Long-lasting coating resists chips and rust• Comfortable, soft, textured grip with rugged high-impactthermoplastic ferrule• Convenient hanging ring ensures easy storageExtendable HandleTool RackSP 3099**Tools not IncludedBulb Planter• 4.5" Deep steel core, ideal for bulb planting• Black oxide to prevent corrosion and for self cleaning• Ergonomically designed handle for maximum comfortSG 2950GT 3050 - RakeGT 3060 - Hoe/CultivatorGT 3070 - CultivatorGT 3080 - TrowelGT 3090 - 3-Tine HoeeGrip Trowel• Cast-aluminum large capacity trowel with bag ripper• The most comfortable grip in the garden• Ergonomically designed grip improves comfortCT 3710HAND & GARDEN TOOLSeGrip Transplanter• Cast-aluminum serrated blade for cutting roots andbag ripper feature• The most comfortable grip in the garden• Ergonomically-designed grip improves comfortCT 3720eGrip Cultivator• Cast-aluminum tapered tines move throughthe soil easily• The most comfortable grip in the garden• Ergonomically-designed grip improves comfortCT 3730LIFETIMEWARRANTYeGrip Hoe/Cultivator• Cast-aluminum 2-in-1 tool for weeding and cultivating• The most comfortable grip in the garden• Ergonomically-designed grip improves comfortCT 3740U.S Design PatentD582,227eGrip Weeder• Cast-aluminum serrated blade for cutting roots andbag ripper feature• The most comfortable grip in the garden• Ergonomically-designed grip improves comfortCT 3750U.S Design PatentD581,75259

HANDS & GARDEN TOOLSeSolutions Trowel• Cast aluminum head construction• Non-glare satin finish• Durable and rust resistant• eSolutions Grip – designed to maximize power andcomfort, while minimizing hand stress• Large capacity trowel with depth markingsCT 4410eSolutions Transplanter• Cast aluminum head construction• Non-glare satin finish• Durable and rust resistant• eSolutions Grip – designed to maximize power andcomfort, while minimizing hand stress• Serrated blade and bag ripper add utilityCT 4420LIFETIMEWARRANTYeSolutions Cultivator• Cast aluminum head construction• Non-glare satin finish• Durable and rust resistant• eSolutions Grip – designed to maximize power andcomfort, while minimizing hand stress• Tapered tines move through the soil easilyCT 4430eSolutions Weeder• Cast aluminum head construction• Non-glare satin finish• Durable and rust resistant• eSolutions Grip – designed to maximize power andcomfort, while minimizing hand stress• Forked tip for easy weeding, blade for splitting plantsand serrated edge for cutting rootsCT 4460U.S Design PatentD584,58260

In the early 1920s, when other manufacturerswere settling for stamped orcast tools, Corona® was pounding,compressing and flowing hot steel intohigh-quality, classically designed toolsthat delivered superior performancewith greater reliability.Generations later, the same handtools, often passed on, are shearingthe California grape vines, pruning thelemon, orange and avocado trees of the Southwest, the apples in the Northwest,Midwest and East, and clipping, plucking and shaping landscapes fromcoast to coast.FORGED Orange Shear• Designed for rapid, high-volume orange, grapefruit andapple harvesting• Drop-forged steel alloy• Resharpenable, fully heat-treated blades• Specially designed to sever fruit cleanly fromfruiting spur• Custom-ground cutting edges and balanced springdesign for fast, precise actionAG 5050FORGED Avocado Shear• Designed for rapid, high-volume harvesting ofavocados, mangos, persimmons, tomatoes andother delicate fruits• Drop-forged steel alloy• Resharpenable, fully heat-treated blades• Rounded tips help prevent damaged fruit• Cushioned non-slip gripsAG 5040AGRICULTURAL TOOLSLIFETIMEWARRANTYFORGED Grape Shear• Designed for rapid, high-volume grape harvestingand thinning• Drop-forged steel alloy• Resharpenable, fully heat-treated blades• Rounded tips help prevent damaged fruit• Special curved blades cut hard-to-reach stems• Cushioned non-slip gripsAG 5030FORGED Lemon Shear• Designed for rapid, high-volume lemon andlime harvesting• Drop-forged steel alloy• Resharpenable, fully heat-treated blades• Rounded tips help prevent damaged fruit• Close-tolerance pivot boltAG 501061

HARVEST & FLORAL SHEARSLIFETIMEWARRANTYLong Curved Snip• Designed for picking and field-dressing grape bunches• Fully heat-treated steel blades for strength• Blades, spring and handle coated to prevent rust• Unobtrusive leather strap lockAG 4940Short Curved Snip• For use in harvesting apples, pitted fruits and berries• Fully heat-treated steel blades for strength• Blades, spring and handle coated to prevent rust• Unobtrusive leather strap lockAG 4920Stainless Steel Long Curved Snip• Designed for picking and field-dressing grape bunches• Corrosion-resistant stainless steel blades prevent rusting,are easier to clean and reduce germ build-up• Unobtrusive leather strap lockAG 4940SSLong Straight Snip• Long, straight, pointed blade for a wide range of applications• Fully heat-treated steel blades for strength• Blades, spring and handle coated to prevent rust• Unobtrusive leather strap lockAG 4930Short Straight Snip• Short, straight, blunt-nosed blade for a wide rangeof applications• Fully heat-treated steel blades for strength• Blades, spring and handle coated to prevent rust• Unobtrusive leather strap lockAG 4910Stainless Steel Long Straight Snip• Long, straight, pointed blade for a wide rangeof applications• Corrosion-resistant stainless steel blades prevent rusting,are easier to clean and reduce germ build-up• Unobtrusive leather strap lockAG 4930SSStainless Steel Short Curved Snip• For use in harvesting apples, pitted fruits and berries• Corrosion-resistant stainless steel blades prevent rusting,are easier to clean and reduce germ build up• Unobtrusive leather strap lockAG 4920SSStainless Steel Short Straight Snip• Short, straight, blunt-nosed blade for a wide rangeof applications• Corrosion-resistant stainless steel blades prevent rusting,are easier to clean and reduce germ build up• Unobtrusive leather strap lockAG 4910SS62

Floral Scissors• Stainless steel blades are resharpenable• Serrated blade for easy, clean cuts• Ergonomic, co-molded grips for comfort• Great for cutting an assortment of plants and flowersFS 4000Floral Shears• Long-handled shears for versatile use• Brass coupling and washer resist weathering and keepthe blades aligned• Resharpenable blade• Time-tested, long-lasting steel constructionFS 4200FORGED Thinning Shear - 1 3 ⁄4" blade• Forged steel alloy construction• Scissor cutting action• Suitable for left and right hand use• Resharpenable, straight, narrow blades for tight spaces• Cushioned, non-slip gripsFS 4350FORGED Houseplant Shear - 1 1 ⁄4" blade• Forged steel alloy construction• Compact design for smaller hands• Suitable for left and right hand use• Resharpenable, narrow blades for delicate plants• Cushioned, non-slip gripsFS 4310HARVEST & FLORAL SHEARSLIFETIMEWARRANTY63

ACCESSORIESLeaf & Grass Catcher• Used to manually pick up grass, leaves and yardcleanup debris• Thick, heavy-duty galvanized steel pan• Upper and lower, heavy-duty steel wire frame• Canvas is water and mildew resistantAC 8350Sharpening Tool• 5" Super carbide file• Ideal for sharpening all blades• Easy to fit in pocket• Non-slip grip for easy useAC 8300Leather Scabbard• Top-grain leather construction• Stitched and riveted for durability• Belt clip and loops included• Universal design fits most hand prunersAC 7220Nylon Scabbard• Durable Cordura® nylon construction• Universal design fits hand pruners and folding saws• Easy to carry using metal clip or belt loops• Front pocket for sharpener storageAC 4510LIFETIMEWARRANTYPlastic Scabbards• Lightweight and high-strength reinforcednylon construction• Protects saw blade when not in use• Waistband clip and belt loop optionAC 7400• For use with RS 7395, RS 7385,RS 7120 & RS 7130Leather Scabbard• For use with RS 7130, RS 7120, RS 7395and all-purpose saws• Top-grain leather construction• Stitched and riveted for durabilityAC 7300AC 7370• For use with RS 7370AC 7360• For use with RS 736064

DISPLAY RACKSCorona® not only produces classically designed tools that deliver superior performance, butalso racks that help you display tools in a way that ensures an attractive, attention getting,point of purchase look.Please refer to the following pages for those racks that will best fit your needs.If you would like to take it one step further and make sure your tools are well organized,we also offer labels to specify which tools will be kept on that rack.Contact your local Corona® representative or Corona® Customer Service.65

LONG HANDLE TOOL RACKS & LABELSDisplay RackMR 9115*Rake RackMR 9156Trench Shovel RackMR 9154Heavy Bar RackMR 9157*Tools not IncludedBroom RackMR 9155Long Handle ToolRolling RackMR 9161*Long Handle ToolWaterfall RackLong Handle ToolHanging Multi-Tool DisplayWall Mounting RackBow/Level Rake66MR 9162MR 9163MR 9168

MODELNUMBERRACKNUMBERFORGED SHOVELSSF 70000 . . . . . . . MR 9162SF 70010 . . . . . . . MR 9162SF 71000 . . . . . . . MR 9162SF 71010 . . . . . . . MR 9162SF 72000 . . . . . . . MR 9162SF 72010 . . . . . . . MR 9162SF 73000 . . . . . . . MR 9162SF 73010 . . . . . . . MR 9162SF 74004 . . . . . . . MR 9154SF 74005 . . . . . . . MR 9154SF 74006 . . . . . . . MR 9154SF 75005 . . . . . . . MR 9162SF 77000 . . . . . . . MR 9162SF 77010 . . . . . . . MR 9162SF 78000 . . . . . . . MR 9162SF 78010 . . . . . . . MR 9162STAMPED SHOVELSSS 60000 . . . . . . . MR 9162SS 60010 . . . . . . . MR 9162SS 60020 . . . . . . . MR 9162SS 60030 . . . . . . . MR 9162SS 61000 . . . . . . . MR 9162SS 61020 . . . . . . . MR 9162SS 61030 . . . . . . . MR 9162SS 62000 . . . . . . . MR 9162SS 62010 . . . . . . . MR 9162SS 62020 . . . . . . . MR 9162SS 62030 . . . . . . . MR 9162SS 63000 . . . . . . . MR 9162SS 63010 . . . . . . . MR 9162SS 63020 . . . . . . . MR 9162SS 63030 . . . . . . . MR 9162SS 64002 . . . . . . . MR 9154SS 64022 . . . . . . . MR 9154SS 64023 . . . . . . . MR 9154SS 64004 . . . . . . . MR 9154SS 64024 . . . . . . . MR 9154MODELNUMBERRACKNUMBERSTAMPED SHOVELS (CONT.)SS 64005 . . . . . . . MR 9154SS 64025 . . . . . . . MR 9154SS 64006 . . . . . . . MR 9154SS 64026 . . . . . . . MR 9154HOLLOW-BACK SHOVELSSS 65000 . . . . . . . MR 9162SS 65010 . . . . . . . MR 9162SS 65020 . . . . . . . MR 9162SS 65030 . . . . . . . MR 9162SS 66000 . . . . . . . MR 9162SS 66010 . . . . . . . MR 9162SS 66020 . . . . . . . MR 9162SS 66030 . . . . . . . MR 9162SS 67000 . . . . . . . MR 9162SS 67010 . . . . . . . MR 9162SS 67020 . . . . . . . MR 9162SS 67030 . . . . . . . MR 9162LANDSCAPE RAKESRK 61060 . . . . . . . MR 9156RK 61061 . . . . . . . MR 9156RK 61062 . . . . . . . MR 9156HOESFH 70000 . . . . . . . MR 9163FH 71000 . . . . . . . MR 9163FH 71001 . . . . . . . MR 9163FH 71002 . . . . . . . MR 9163FH 71003 . . . . . . . MR 9163SH 60000 . . . . . . . MR 9163SH 60001 . . . . . . . MR 9163SH 62000 . . . . . . . MR 9163SH 62060 . . . . . . . MR 9163SH 63000 . . . . . . . MR 9163CULTIVATORSCV 70001 . . . . . . . MR 9163CV 70003 . . . . . . . MR 9163CV 70004 . . . . . . . MR 9163MODELNUMBERRACKNUMBERHEAVY BARSBR 70090 . . . . . . . MR 9157BR 71090 . . . . . . . MR 9157BR 72090 . . . . . . . MR 9157BR 73090 . . . . . . . MR 9157BR 74090 . . . . . . . MR 9157BROOMSBM 60001. . . . . . . MR 9155BM 61002. . . . . . . MR 9155BM 62001. . . . . . . MR 9155BOW RAKESRK 65001 . . . . . . . MR 9168RK 65002 . . . . . . . MR 9168RK 65021 . . . . . . . MR 9168RK 65022 . . . . . . . MR 9168RK 20002 . . . . . . . MR 9168LEVEL RAKESRK 66000 . . . . . . . MR 9168RK 64000 . . . . . . . MR 9168RK 64002 . . . . . . . MR 9168RK 64020 . . . . . . . MR 9168RK 64022 . . . . . . . MR 9168MULTI-TOOLROLLING RACK . . . . MR 9115PEG HOOKS . . . . . MR 9124(for MR 9115)LONG HANDLE TOOL RACKS & LABELSCUSTOM PRODUCT LABELS AVAILABLE FOR EACH RACKPlease mention tool model number when ordering racks thruyour Corona® representative or Corona® Customer Service67

PRUNING TOOL RACKS & LABELSLopper RackMR 9111Hedge Shear RackTree Pruner RackMR 9112Lopper RackHedge Shear/Lopper RackMR 9114Lopper RackMR 9116MR 9122MR 9123Lopper RackMR 9125Lopper RackMR 912668

MODELNUMBERRACKNUMBERHEDGE SHEARSAH 6970 . . . . . . . . . MR 9122AH 6950 . . . . . . . . . MR 9122AH 6940 . . . . . . . . . MR 9122HS 6960 . . . . . . . . . MR 9114HS 6930 . . . . . . . . . MR 9123HS 6920 . . . . . . . . . MR 9123HS 3911 . . . . . . . . . MR 9116LOPPERSAL 6511. . . . . . . . . . . MR 9125AL 8481. . . . . . . . . . . MR 9126AL 8461. . . . . . . . . . . MR 9126AL 8441. . . . . . . . . . . MR 9126AL 8320. . . . . . . . . . . MR 9126AL 8310. . . . . . . . . . . MR 9126AL 8260. . . . . . . . . . . MR 9126AL 8240. . . . . . . . . . . MR 9126AL 8150. . . . . . . . . . . MR 9126AL 8130. . . . . . . . . . . MR 9126AL 8040. . . . . . . . . . . MR 9125AL 8020. . . . . . . . . . . MR 9125FL 3470 . . . . . . . . . . . MR 9125MODELNUMBERRACKNUMBERLOPPERS (CONT.)FL 3460 . . . . . . . . . . . MR 9123FL 3450 . . . . . . . . . . . MR 9125FL 3420 . . . . . . . . . . . MR 9122FL 3410 . . . . . . . . . . . MR 9125SL 3310. . . . . . . . . . . MR 9125SL 4150. . . . . . . . . . . MR 9126SL 6500. . . . . . . . . . . MR 9126WL 6490 . . . . . . . . . . MR 9126WL 6481 . . . . . . . . . . MR 9114WL 6461 . . . . . . . . . . MR 9114WL 6431 . . . . . . . . . . MR 9114WL 6381 . . . . . . . . . . MR 9125WL 6361 . . . . . . . . . . MR 9123WL 6341 . . . . . . . . . . MR 9122WL 3351 . . . . . . . . . . MR 9125WL 6321 . . . . . . . . . . MR 9125WL 3370 . . . . . . . . . . MR 9125MULTI-TOOLHAND TOOL/PRUNER RACK . . MR 9178STRIKING TOOL RACK. . . MR 9179FOLDING RACK . . . . . . MR 9180LOPPER RACK. . . . . . . MR 9111TREE PRUNERS. . . . . . MR 9112CUSTOM PRODUCT LABELS AVAILABLE FOR EACH RACKPlease mention tool model number when ordering racks thruyour Corona® representative or Corona® Customer ServicePRUNING TOOL RACKS & LABELSHand Tool/Pruner RackMR 9178Folding RackMR 9180Striking Tool RackMR 917969

INDEXLISTED ALPHA-NUMERICALLY70CATALOG MODEL PRICELISTPAGE NUMBER PAGE24 40000-4 4524 40001-4 NPC pg. 3 *24 40004-4 NPC pg. 3 *24 40000-8 4524 41000-4 4524 41000-8 4624 42000-8 4624 43003-4 NPC pg. 3 *20 60061-8 3716 62000-8 3216 62001-8 3255 6880-8 7924 73020-4 4530 AC 2500 5730 AC 2600 5764 AC 4510 9249, 56 AC 7041 9164 AC 7220 9350 AC 7230 9356 AC 7240 8256 AC 7241 8256 AC 7242 8249, 64 AC 7300 9151 AC 7310 9351 AC 7330 9348, 64 AC 7360 9248, 64 AC 7370 9248, 64 AC 7400 9256 AC 7610 8256 AC 7672 8264 AC 8300 9164 AC 8350 9254 AC 9000 7956 AC 9010 8356 AC 9020 8355 AC 9100 8055 AC 9200 8154 AC 9300 8055 AC 9500 8055 AC 9510 8055 AC 9550 8062 AG 4910 8962 AG 4910SS 9062 AG 4920 8962 AG 4920SS 9062 AG 4930 8962 AG 4930SS 9062 AG 4940 8962 AG 4940SS 8961 AG 5010 8861 AG 5030 8861 AG 5040 8861 AG 5050 8838 AH 4220 6438 AH 4240 65*2009 New Product Catalog/Price ListCATALOG MODEL PRICELISTPAGE NUMBER PAGE38 AH 4250 6437 AH 6930 6337 AH 6940 6237 AH 6950 6237 AH 6970 6244 AL 3341 7044 AL 3390 7044 AL 4110 7044 AL 4130 7044 AL 6511 6842 AL 8020 6842 AL 8040 6742 AL 8120 6742 AL 8130 6742 AL 8150 6742 AL 8240 6742 AL 8260 6641 AL 8310 6541 AL 8320 6641 AL 8441 6641 AL 8461 6641 AL 8481 6635 AP 2930 6135 AP 3110 6123 AX 70020 4323 AX 71020 4329 BM 60001 5429 BM 61002 5429 BM 62001 5529 BM 62060 5535 BP 2930 6134 BP 3120 6033 BP 3130 5835 BP 3140 6133 BP 3160 5833 BP 3180 5835 BP 3225 6135 BP 3350 6033 BP 3640 5934 BP 4180 6034 BP 4220 5934 BP 4240 5934 BP 4250 5933 BP 4840 5933 BP 6170 5833 BP 6190 5733 BP 6250 5734 BP 6590 5825 BR 70090 4825 BR 71090 4825 BR 72090 4825 BR 73090 4825 BR 74090 4950 BS 4010 7750 BS 4020 76NEW ITEMS IN BOLDCATALOG MODEL PRICELISTPAGE NUMBER PAGE50 BS 4030 7628 CS 60000 5358 CT 3010i 8658 CT 3020i 8658 CT 3030i 8658 CT 3040i 8658 CT 3050i 8659 CT 3710 8459 CT 3720 8459 CT 3730 8459 CT 3740 8459 CT 3750 8560 CT 4410 8560 CT 4420 8560 CT 4430 8560 CT 4460 8521 CV 20004 4321 CV 22000 4321 CV 60061 4221 CV 60063 4221 CV 60064 4321 CV 70001 4221 CV 70003 4221 CV 70004 4253 EP 3700 7919 FH 70000 3519 FH 71000 3519 FH 71001 3619 FH 71002 3619 FH 71003 3622 FK 42000 4122 FK 60000 4122 FK 70000 3922 FK 70010 3922 FK 71003 4022 FK 71004 4022 FK 71005 4022 FK 72004 4022 FK 72005 4022 FK 72065 4122 FK 74010 4122 FK 75010 4145 FL 3410 7144 FL 3420 7145 FL 3450 7145 FL 3460 7045 FL 3470 7154 FP 3008 8154 FP 3010 8154 FP 3012 8154 FP 3014 8163 FS 4000 9063 FS 4200 9063 FS 4310 9163 FS 4350 91

NEW ITEMS IN BOLDCATALOG MODEL PRICELISTPAGE NUMBER PAGE39 GS 3750 6539 GS 3760 6539 GS 6750 6559 GT 3050 8859 GT 3060 8759 GT 3070 8759 GT 3080 8759 GT 3090 8738 HS 3900 6438 HS 3911 6338 HS 3930 6438 HS 3950 6437 HS 6920 6337 HS 6930 6337 HS 6960 6358 HT 65050 8358 HT 69100 8358 HT 69200 8358 HT 69300 8434 LR 3460 6251 MA 60041 7751 MA 60042 7751 MA 61040 7751 MA 62040 7768 MR 9111 N/A68 MR 9112 N/A68 MR 9114 N/A68 MR 9116 N/A68 MR 9122 N/A68 MR 9123 N/A68 MR 9125 N/A68 MR 9126 N/A66 MR 9155 N/A66 MR 9154 N/A66 MR 9155 N/A66 MR 9156 N/A66 MR 9157 N/A66 MR 9161 N/A66 MR 9162 N/A66 MR 9163 N/A66 MR 9168 N/A69 MR 9178 N/A69 MR 9179 NPC pg. 3 *69 MR 9180 NPC pg. 4 *13 PD 10000 2913 PD 20000 2913 PD 40000 2813 PD 40020 2813 PD 60000 2824 PM 40000 4424 PM 41000 4424 PM 42000 4524 PM 73020 4424 PM 74020 4424 PM 75020 44*2009 New Product Catalog/Price ListCATALOG MODEL PRICELISTPAGE NUMBER PAGE50 PS 4040 7650 PS 4050 7650 PS 4081 7650 PS 7020 7550 RC 4060 7517 RK 10000 3516 RK 19000 3417 RK 20002 3517 RK 20022 3516 RK 24002 3316 RK 24003 3316 RK 25008 3416 RK 25018 3416 RK 25024 3417 RK 42000 3415 RK 61060 2915 RK 61061 2915 RK 61062 3015 RK 61063 2915 RK 61064 3016 RK 62000 3116 RK 62001 3116 RK 62060 3116 RK 62061 3116 RK 63003 3315 RK 64002 3015 RK 64022 3015 RK 64060 3017 RK 65001 3217 RK 65002 3217 RK 65021 3217 RK 65022 3317 RK 65061 3315 RK 66000 3146 RL 3560 7235 RP 3230 6249 RS 4040 7549 RS 7041 7549 RS 7060 7549 RS 7120 7449 RS 7130 7448 RS 7160 7448 RS 7245 7348 RS 7255 7348 RS 7265 7348 RS 7360 7348 RS 7370 7348 RS 7395 7449 RS 7500 743 SF 70000 63 SF 70010 63 SF 71000 63 SF 71010 63 SF 72000 63 SF 72010 7CATALOG MODEL PRICELISTPAGE NUMBER PAGE3 SF 72030 73 SF 73000 73 SF 73010 73 SF 73030 73 SF 77000 83 SF 77010 83 SF 77020 83 SF 78010 83 SF 79000 83 SF 80000 93 SF 80020 959 SG 2950 8719 SH 10000 3920 SH 15000 NPC pg. 4 *19 SH 20000 3920 SH 22000 3920 SH 60000 3620 SH 60001 3719 SH 60060 3620 SH 60061 3720 SH 61000 3720 SH 62000 3720 SH 62020 3820 SH 63000 3819 SH 64000 3820 SH 65000 38N/A SH 65000KD 3846 SL 3310 7246 SL 4150 7246 SL 6500 7259 SP 3099 N/A7 SS 10000 197 SS 11000 197 SS 25010 197 SS 26000 167 SS 26010 167 SS 26020 167 SS 26030 167 SS 27000 167 SS 27010 177 SS 27020 177 SS 27030 177 SS 28000 177 SS 28010 177 SS 28020 187 SS 28030 187 SS 29000 187 SS 29010 187 SS 29020 187 SS 29030 196 SS 30020 156 SS 30030 156 SS 31020 156 SS 31030 156 SS 39000 15INDEXLISTED ALPHA-NUMERICALLY71

INDEXLISTED ALPHA-NUMERICALLYCATALOG MODEL PRICELISTPAGE NUMBER PAGE12 SS 42001 2812 SS 42011 287 SS 47000 1912 SS 49100 274 SS 60000 94 SS 60010 94 SS 60020 104 SS 60030 104 SS 61000 104 SS 61010 104 SS 61020 104 SS 61030 114 SS 62000 114 SS 62010 114 SS 62020 114 SS 62030 114 SS 62100 124 SS 62110 124 SS 62120 124 SS 62130 124 SS 63000 124 SS 63010 139 SS 64002 209 SS 64003 209 SS 64004 209 SS 64005 209 SS 64006 209 SS 64022 219 SS 64023 219 SS 64024 219 SS 64025 219 SS 64026 2110 SS 64103 2210 SS 64104 2210 SS 64105 2210 SS 64106 2210 SS 64123 2210 SS 64124 2310 SS 64125 2310 SS 64126 2310 SS 64223 2310 SS 64224 2310 SS 64225 2410 SS 64226 2411 SS 64303 2411 SS 64304 2411 SS 64305 2411 SS 64306 2511 SS 64323 25CATALOG MODEL PRICELISTPAGE NUMBER PAGE11 SS 64324 2511 SS 64325 2511 SS 64326 2511 SS 64333 2611 SS 64334 2611 SS 64335 2611 SS 64336 265 SS 65000 135 SS 65010 135 SS 65020 135 SS 65030 135 SS 65500 145 SS 66000 145 SS 66010 145 SS 66020 145 SS 66030 1412 SS 68000 2612 SS 68010 2712 SS 68030 2712 SS 69000 2712 SS 69010 2723 ST 40001 4723 ST 40004 4623 ST 40006 4723 ST 40010 4723 ST 40012 4723 ST 40016 4723 ST 40020 4723 ST 43003 NPC pg. 3 *23 ST 70020 4623 ST 70021 4623 ST 70022 4623 ST 70023 4623 ST 70024 4623 ST 70025 4623 ST 73003 NPC pg. 3 *34, 54 TP 3206 NPC pg. 1 *54 TP 3212 NPC pg. 1 *53 TP 3811 7953 TP 3841 7953 TP 5850 7852 TP 6830 7852 TP 6850 7852 TP 6870 7852 TP 6881 7828 UT 20000 5328 UT 21000 5328 UT 22000 5428 UT 24000 54NEW ITEMS IN BOLDCATALOG MODEL PRICELISTPAGE NUMBER PAGE28 UT 47000 5426 UT 60050 4926 UT 60053 4926 UT 60055 4926 UT 60057 4927 UT 61000 5126 UT 62050 5026 UT 62051 5026 UT 62052 5026 UT 62055 5026 UT 63050 5027 UT 64020 5127 UT 64050 5127 UT 65001 5127 UT 65002 5127 UT 66004 5227 UT 66006 5227 UT 67001 5227 UT 67002 5227 UT 67003 5228 UT 70000 5328 UT 71000 5331 WB 1006 5731 WB 1006FF 5631 WB 1010 5631 WB 2006 5631 WB 2006FF 5531 WB 2506K 5631 WB 2506KFF 5531 WB 2606K 5631 WB 2606KFF 5546 WL 3351 7244 WL 3370 7143 WL 6310 NPC pg. 2 *43 WL 6321 6943 WL 6330 NPC pg. 2 *43 WL 6341 6943 WL 6350 NPC pg. 2 *43 WL 6361 6943 WL 6370 NPC pg. 2 *43 WL 6381 6943 WL 6420 NPC pg. 2 *43 WL 6431 6943 WL 6450 NPC pg. 2 *43 WL 6461 6843 WL 6470 NPC pg. 2 *43 WL 6481 6843 WL 6490 68*2009 New Product Catalog/Price ListCorona, Shock Stop, Radial Arc, Stratashear3, First Choice for Generations and Razor Tooth Saw are registered trademarksof Corona Clipper, Inc. Dual Arc, Corobond, Powerglide, Comfort Tool and Quick Connect System are Trademarks ofCorona Clipper, Inc. Alcryn is a registered trademark of Ferro Corporation. Cordura is a registered trademark for durable fabrics.72

Ergonomics make Corona® tools a good fit.Since every Corona® tool is powered by human muscle, ergonomics is one of the first factors that we consider when designing newproducts. Corona® tools are designed to work in close coordination with the human body through four key areas:Weight – Neither too heavy nor too light for the job.Balance – Designed for even distribution of mass that feels natural in motion.Grip Dimensions – Measured to maximize control while preventing fatigue.Grip Texture – Either a soft, non-slip surface for a firm hold or a smooth surfaceto reduce friction, which depends on how the tool is used.Some tools are much more challenging to make ergonomic. For example, the ergonomics of a hand pruner are closely related to thehand size and physical strength of the user, so it’s difficult to design one shape that works for everyone. That’s why Corona® offersa wide selection of pruners.The process of ergonomic design at Corona® always startswith reviewing well-established ergonomic principles, such asavoiding high pressure points in the grip and sizing the gripdiameter within a certain range. Even though it’s not directlyrelated to ergonomics, our team also considers tool maintenanceand what spare parts should be readily available. Bothof these factors contribute to the overall enjoyment of the tool.Next, prototypes or working models are made to test newdesigns. Adjustments to the models are made until thedesign team is satisfied. Then the samples are sent to anindependent lab for testing and evaluation. TheErgonomics Center of North Carolina at NCSU is one of ourengineering partners. They measure muscle activity, angles ofjoints and other objective factors, as well as providesubjective opinions.After this rigorous testing phase is complete, finaladjustments are made. The tool heads into production, ontostore shelves and into consumers’ hands.There is no substitute for real life experience in determiningergonomics for any tool, and with more than 80 years ofexperience, Corona® has plenty to draw from.

Corona Clipper, Inc.22440 Temescal Canyon RoadCorona, CA 92883Tel (951) 737-6515Toll Free (800) 847-7863Fax (951) 737-8657E-mail: sales@coronaclipper.comA Bellota Companywww.coronaclipper.com© Copyright 2009 Corona Clipper, Inc. CC 9330 - 09-09 - 15,000