1 Display the screen. - UTAX UK

Preparation before Use > Energy Saver functionSleep and Auto SleepSleepTo enter Sleep, press the Power key. Touch panel and all indicators on the operation panel willgo out to save a maximum amount of power except the Main Power indicator. This status isreferred to as Sleep.If print data is received during Sleep, the touch panel lights up and printing starts.When using the optional fax, received data is printed out while the operation panel remainsunlit.To resume, press the Power key. The machine will be ready to use within 20 seconds.Note that ambient environmental conditions, such as ventilation, may cause the machine torespond more slowly.Auto SleepAuto Sleep automatically switches the machine into Sleep if left idle for a preset time. Thedefault preset time is 1 minute.For more information about configuring settings, refer to Sleep Timer on page 9-25.NOTEWhen a preset time of Low Power Timer and Sleep Timer is same, Sleep overrides LowPower Mode.Energy SaverThis mode reduces power consumption even more than normal Sleep mode, and allows SleepMode to be set separately for each function. Printing from a computer connected with a USBcable is not available while the machine is asleep.To use the machine, press the Power key. The time required for the machine to wake up frompower save mode and resume normal operation will be longer than for normal Sleep Mode.NOTEIf the optional Gigabit Ethernet Board is installed, Energy Saver cannot be specified.For more information on Energy Saver Mode settings, refer to Sleep Level on page 9-25.2-23