1 Display the screen. - UTAX UK

Preparation before Use > Energy Saver functionEnergy Saver functionLow Power Mode and Auto Low Power ModeLow Power ModeTo activate Low Power Mode, press the Energy Saver key. Touch panel and all indicators onthe operation panel will go out to save power except the Energy Saver, Power, and MainPower indicators. This status is referred to as Low Power Mode.If print data is received during Low Power Mode, the machine automatically wakes up andstarts printing. Also when fax data arrives while the machine is in Low Power Mode whenusing the optional fax, the machine automatically wakes up and starts printing.To resume, perform one of the following actions. The machine will be ready to operate within10 seconds.• Press any key on the operation panel.• Open the document processor.• Place originals in the document processor.Note that ambient environmental conditions, such as ventilation, may cause the machine torespond more slowly.Auto Low Power ModeAuto Low Power Mode automatically switches the machine into Low Power Mode if left idle fora preset time. The default preset time is 1 minute.For more information about configuring settings, refer to Low Power Timer on page 9-24.NOTEWhen a preset time of Low Power Timer and Sleep Timer is same, Sleep overrides LowPower Mode.2-22