1 Display the screen. - UTAX UK

Appendix > PaperLabelBe sure to feed labels from the multi purpose tray.For selecting labels, use extreme care so that the adhesive may not come in direct contact with any part of the machineand that the labels are not easily peeled from the carrier sheet. Adhesives that stick to the drum or rollers and peeledlabels remaining in the machine may cause a failure.When printing onto labels, you must be liable for the print quality and possible trouble.Top sheetAdhesive layerCarrier sheetLabels consist of three layers as shown in the illustration. The adhesive layer contains materials that are easily affectedby the force applied in the machine. The carrier sheet bears the top sheet until the label is used. This composition oflabels may cause more problems.The label surface must be covered completely with the top sheet. Gaps between labels may cause peeling of labels,resulting in a serious failure.Some label paper has large margins on the top sheet. When using such paper, do not peel these margins from thecarrier sheet before completing output.AllowedNot allowedTop sheetCarrier sheetUse label paper that conforms to the following specifications.Top sheet weightBasis weight (overall paper weight)Top sheet thicknessOverall paper thicknessMoisture content44 to 74 g/m²104 to 151 g/m²0.086 to 0.107 mm0.115 to 0.160 mm4 to 6 % (composite)11-15