1 Display the screen. - UTAX UK

Appendix > Character Entry MethodCharacter Entry MethodTo enter characters for a name, use the on-display keyboard in the touch panel following the steps as explained below.NOTEQWERTY, QWERTZ and AZERTY are available as keyboard layouts the same as a PC keyboard. Press the SystemMenu/Counter key, [Common Settings] and then [Keyboard Layout] to choose desired layout. QWERTY layout isused here as an example. You may use another layout following the same steps.Entry ScreensLower-case Letter Entry Screen34 5 6 71Add - NameAbcABCA/aInput: 3Limit: 32Del.2qa@wszedxrfctgvyhbujnikmol.p89Cancel< Back Next >GB0057_E0110 11 12No. Display/Key Description1 Display Displays entered characters.2 Keyboard Press the character to enter.3 [ABC] / [Symbol] Select the characters that are entered. To enter symbols or numbers,select [Symbol].4 [A/a] Press to switch between upper case and lower case.5 Cursor Key Press to move the cursor on the display.6 [Input] / [Limit] Display Displays maximum number of characters and the number ofcharacters entered.7 Delete Key Press to delete a character to the left of the cursor.8 Space Key Press to insert a space.9 Enter Key Press to enter a line break.10 [Cancel] Press to cancel entered characters and return to the screen beforethe entry was made.11 [< Back] Press to return to the previous screen.12 [OK] / [Next >] Press to save the entered characters and move to the next screen.11-7