1 Display the screen. - UTAX UK

Appendix > Optional Equipment2Remove the covers.3Install the memory module.1 Remove the memory module from its package.2 With the memory connection terminal pointing toward the socket, align the cut-out part withthe socket terminal and insert directly in at an angle.3 Carefully press the inserted memory down and into the machine.4 Reinstall the covers.Removing the Memory ModuleTo remove a memory module, remove the right cover and the memory slot cover from the machine. Then, carefully pushout the two socket clamps. Ease the memory module out of the socket to remove.Verifying the Expanded MemoryTo verify that the memory module is working properly, test it by printing a status page.Refer to Report on page 9-5.IMPORTANTBefore inserting a memory module in the machine, make sure that the machine isswitched off.Card Authentication Kit (B)User login administration can be performed using IC cards. To do so, it is necessary to register IC card information onthe previously registered local user list. For more information about how to register this information, refer to the IC CardAuthentication Kit Operation Guide.11-4