1 Display the screen. - UTAX UK

Troubleshooting > Responding to MessagesResponding to MessagesIf the touch panel or the computer displays any of these messages, follow the corresponding procedure.AMessage Checkpoints Corrective Actions ReferencePageAcceptable staple countexceeded.*Is the acceptable staple countexceeded? For details, refer toDocument Finisher (option) onpage 11-22.Press [Continue] to print withoutstapling.Press [Cancel] to cancel the job.—Activation error. — Turn the main power switch off and on. Ifthe error exists, contact administrator.2-12Add the following paper incassette #.Is the indicated cassette out ofpaper?Load paper.Press [Paper Selection] to select theother paper source.Press [Continue] to print on the paper inthe currently selected paper source.3-3Add the following paper in themulti purpose tray.Is the paper of the selected sizeloaded in the multi purpose tray?Load paper.Press [Paper Selection] to select theother paper source.Press [Continue] to print on the paper inthe currently selected paper source.3-5Does the paper size set for thepaper source matches the papersize that was actually loaded?Press [Continue] to continue printing.Press [Cancel] to cancel the job.—Adjusting Scanner. — The machine is under the adjustment tomaintain its quality. Please wait.—* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.BMessage Checkpoints Corrective Actions ReferencePageBox limit exceeded.*Is [End] displayed on the touchpanel?Document box is full, and no furtherstorage is available; Job is canceled.Press [End]. Try to perform the job againafter printing or deleting data from theDocument Box.—* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.10-13