1 Display the screen. - UTAX UK

Setup, Registration, and User Management > System MenuAdjustment/MaintenanceAdjust printing quality and conduct machine maintenance.ItemDescriptionDensity AdjustmentCopySend/BoxBackground Density Adj.Copy (Auto)Send/Box (Auto)Toner Save Level (EcoPrint)CopyPrinterPrint DensityAuto Color CorrectionCorrecting Black LineDisplay BrightnessAdjust density.Adjust copy density. Adjustment can be made in 7 levels.Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)Adjust scan density when sending or storing the data in Document Box. Adjustment can bemade in 7 levels.Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)Darkens or lightens overall background density adjustment.Darkens or lightens overall background density adjustment during copying. Adjustment can bemade in 7 levels.Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)Darkens or lightens overall background density when sending images or storing them in theDocument Box. Adjustment can be made in 7 levels.Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)Set the toner-saving level when using EcoPrint.Lowers or raises the toner-saving level during copying. Adjustment can be made in 5 levels.*Value: 1 to 5Lowers or raises the toner-saving level during printing. Adjustment can be made in 5 levels.Value: 1 to 5Adjust print density. Adjustment can be made in 5 levels.Value: 1 to 5This setting allows you to adjust the detection level used by the machine to determine whetherthe original is color or black and white during Auto Color Mode. Setting a lower value will resultin more originals being identified as color, while a larger value will tend to increase the numberof originals being identified as black and white.Value: 5 (B & W), 4, 3, 2, 1 (Color)Correct fine lines (streaks caused by contamination), which may appear on the image, whenthe document processor is used.ValueOff: No correction performed.On (Low): Correction performed. The reproduction of fine lines on the original may becomelighter than when using [Off].On (High): Select this item if a streak remains after using [On (Low)]. The reproduction of finelines on the original may become lighter than when using On (Low).Set the brightness of the touch panel.Value: 1 (Darker), 2, 3, 4 (Lighter)9-26