1 Display the screen. - UTAX UK

Setup, Registration, and User Management > System MenuItemDescriptionSleep Level(Detailed settings)Sleep TimerAuto Error ClearError Clear TimerInterrupt Clear TimerSelect the Sleep level.Set the Energy Saver mode to reduce power consumption even more than normal Sleep mode.Value: Quick Recovery, Energy SaverNOTE: If the optional Gigabit Ethernet Board is installed, Energy Saver cannot bespecified.Set whether to use the Energy Saver mode for the following functions individually:NetworkUSB CableCard ReaderRAM DiskFAXApplicationValue: Off, OnNOTE: When the machine enters Energy Saver, the data stored in the RAM disk will bedeleted. In addition, the machine does not wake from sleep mode when it receives printdata from a PC connected by USB cable. Also, the ID card cannot be recognized.Set amount of time before entering Sleep.Value: 1 to 240 minutes (1 minute increments)NOTE: If you select [Off] for [Auto Sleep], the time display does not appear.If an error occurs during processing, processing stops to wait for the next step to be taken bythe user. In the Auto Error Clear mode, automatically clear the error after a set amount of timeelapses. For details, refer to Responding to Messages on page 10-13.Value: Off, OnIf you select [On] for Auto Error Clear, set the amount of time to wait before automaticallyclearing errors.Value: 5 to 495 seconds (every five seconds)NOTE: If you select [Off] for [Auto Error Clear], the time display does not appear.Set the period after which the machine reverts to Normal mode when it has been set toInterrupt Copy mode and then left unused.Value: 5 to 495 seconds (every five seconds)9-25