1 Display the screen. - UTAX UK

Setup, Registration, and User Management > System MenuItemSMTP SecurityPOP3 Security (User 1)POP3 Security (User 2)POP3 Security (User 3)DescriptionSelect the communication protocol according to the type of security employed by the SMTPserver. This setup is available when SSL is [On].Value: Off, SSL/TLS, STARTTLSSelect the communication protocol according to the type of security employed by the POP3server. This setup is available when POP3 is [On].Value: Off, SSL/TLS, STARTTLS* After changing the setting, restart the system or turn the machine OFF and then ON.** LDAP must be set to [On] in Protocol Detail on page 9-21.LAN InterfaceLAN InterfaceItemDescriptionSpecify the settings for the LAN interface to be used.*Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T* After changing the setting, restart the system or turn the machine OFF and then ON.Interface Block SettingThis allows you to protect this machine by blocking the interface with external devices such as USB hosts or optionalinterfaces.ItemDescriptionUSB HostUSB DeviceUSB StorageOptional Interface 1Optional Interface 2This locks and protects the USB memory slot (A1) or USB port (A2) (USB host).*Value: Unblock, BlockThis locks and protects the USB interface connector (B1) (USB Device).*Value: Unblock, BlockThis locks and protects the USB memory slot (A1).*Value: Unblock, BlockThis locks and protects the optional interface slots (OPT1 or OPT2).*Value: Unblock, Block* After changing the setting, restart the system or turn the machine OFF and then ON.RAM Disk SettingItemRAM Disk SettingDescriptionA RAM disk can be created and its size can be set. Creating a RAM disk makes it possible toprint from a Job Box.*ValueRAM Disk Setting: Off, OnRAM Disk Size: The setting range varies depending on the amount of memory installed and theoption memory usage setting.* After changing the setting, restart the system or turn the machine OFF and then ON.9-23