1 Display the screen. - UTAX UK

Setup, Registration, and User Management > System MenuProtocol DetailNetBEUILPDItemSMTP (E-mail TX)POP3 (E-mail RX)FTP Client(Transmission)FTP Server (Reception)SMB Client(Transmission)LDAPSNMPSNMPv3HTTPHTTPSIPPIPP over SSLRaw PortThinPrintDescriptionThe table below lists the network related function settings. The network related functions areavailable when [TCP/IP] is [On].Selects whether or not to receive documents using NetBEUI.*Value: Off, OnSelect whether or not to receive documents using LPD as the network protocol.*Value: Off, OnSelect whether or not to send e-mail using SMTP.Value: Off, OnSelect whether or not to receive e-mail using POP3.Value: Off, OnSelect whether or not to send documents using FTP. When selecting [On], set the FTP PortNumber. Use the FTP default port 21.Value: Off, On, Port 1 - 65535Select whether or not to receive documents using FTP.*Value: Off, OnSelect whether or not to send documents using SMB. When selecting [On], set the SMB defaultPort Number. Use the SMB default port 139. For Windows Vista/7, use 445.Value: Off, On, Port 1 - 65535Select whether or not to use LDAP.Value: Off, OnSelect whether or not to communicate using SNMP.*Value: Off, OnSelect whether or not to communicate using SNMPv3.*Value: Off, OnSelect whether or not to communicate using HTTP.*Value: Off, OnSelect whether or not to communicate using HTTPS. SSL must be set to [On] in SSL on page9-22.*Value: Off, OnSelect whether or not to communicate using IPP. When selecting [On], set the IPP default PortNumber. Use the IPP default port 631.*Value: Off, On, Port 1 - 32767Select whether or not to use IPP over SSL. When selecting [On], set the IPP over SSL defaultPort Number. Use the IPP over SSL default port 443. SSL must be set to [On] in SSL on page9-22.*Value: Off, On, Port:1 - 32767Select whether or not to receive documents using Raw Port.*Value: Off, OnSelect whether or not to use ThinPrint.Value: Off, OnThinPrintOverSSL Select whether or not to use ThinPrintOverSSL. SSL must be set to [On] in SSL on page 9-22.Value: Off, On* After changing the setting, restart the system or turn the machine OFF and then ON.9-21