1 Display the screen. - UTAX UK

Setup, Registration, and User Management > System MenuInternetSet the proxy for connection to the Internet from an application.ItemDescriptionProxySpecify the proxy settings.Value: Off, OnUse Same ProxyHTTP Proxy ServerHTTPS Proxy ServerNo Proxy DomainsSet whether or not the same proxy server is used for all protocols. If the same proxy server isnot used, select [Off].Value: Off, OnSet a proxy server (HTTP).Value: (Enter the proxy address and port number.)Set a proxy server (HTTPS). This setup is available when [Use Same Proxy] is [Off].Value: (Enter the proxy address and port number.)Set domains for which no proxy is used.Value: (Enter the domain name.)PrinterPrinting from computers, settings are generally made on the application software screen. However, the followingsettings are available for configuring the defaults to customize the machine.ItemDescriptionEmulationKPDL Error ReportEcoPrintOverride A4/LetterDuplexSelect the emulation for operating this machine by commands oriented to other types ofprinters.Value: PCL6, KPDL, KPDL(Auto)When an error has occurred during printing in KPDL emulation mode, set whether or not theerror report is output.Value: Off, OnEcoPrint conserves toner when printing. This is recommended for test copies where fadedprinting is not a problem.Value: Off, OnSelect whether to treat A4 size and Letter, which are similar in size, as the same size whenprinting.ValueOff: A4 and Letter are not regarded as the same in size.On: A4 and Letter are regarded as the same in size. The machine will use whichever size is inthe paper source.Select binding orientation for duplex mode.Value: 1-sided, 2-sided Bind LongEdge, 2-sided Bind ShortEdgeCopies Set the default number of copies, from 1 to 999.Value: 1 to 999 copiesOrientationWide A4Set the default orientation, [Portrait] or [Landscape].Value: Portrait, LandscapeTurn this to on to increase the maximum number of characters that can be printed in a line foran A4 page (80 characters at 10 pitch) and Letter size page (80 characters at 10 pitch). Thissetting is only effective in PCL 6 emulation.Value: Off, On9-17