MarTest 800 Test Indicators metric models - Swiss Instruments Limited

-4-MarTest. Test IndicatorsMarTest. Test IndicatorsOverviewMarTest - VersionsStandardExtra Long StyliHigher ResolutionLarger Measuring RangeHorizontal ModelsVertical ModelsMeasuring Dial style Readings AccuracyDINrange 2270 f gesf ef uf tf wmetric800 S +/- 0.4 mm 0-40-0 0.01 mm • 13 µm 10 µm 3 µm 5 µm 3 µm800 SG +/- 0.4 mm 0-40-0 0.01 mm • 13 µm 10 µm 3 µm 5 µm 3 µm800 SA +/- 0.25 mm 0-25-0 0.01 mm 8 µm 5 µm 3 µm 5 µm 3 µm800 SGA +/- 0.25 mm 0-25-0 0.01 mm 8 µm 5 µm 3 µm 5 µm 3 µminch801 S1 +/- .015“ 0-15-0 .001“ .0005“ .0004“ .00012“ .0002“ .0002“801 S +/- .015“ 0-15-0 .0005“ .0005“ .0004“ .00012“ .0002“ .0002“801 SG +/- .015“ 0-15-0 .0005“ .0005“ .0004“ .00012“ .0002“ .0002“801 SGI +/- .015“ 0-15-0 .001“ .0005“ .0004“ .00012“ .0002“ .0002“(+/-0.30 mm) (0-30-0) (0.01 mm)metric800 SL +/- 0.25 mm 0-25-0 0.01 mm 13 µm 10 µm 5 µm 5 µm 3 µm800 SGL +/- 0.25 mm 0-25-0 0.01 mm 13 µm 10 µm 5 µm 5 µm 3 µm800 SGB +/- 0.5 mm 0-50-0 0.01 mm 13 µm 10 µm 4 µm 5 µm 3 µminch801 SL +/- .010“ 0-10-0 .0005“ .0005“ .0004“ .0002“ .0002“ .00012“801 SGL +/- .010“ 0-10-0 .0005“ .0005“ .0004“ .0002“ .0002“ .00012“metric800 SM +/- 0.1 mm 0-100-0 0.002 mm • 4 µm 3 µm 2 µm 2 µm 1.5 µm800 SGM +/- 0.1 mm 0-100-0 0.002 mm • 4 µm 3 µm 2 µm 2 µm 1.5 µm800 SGE +/- 0.07 mm 0-70-0 0.001 mm 4 µm 3 µm 2 µm 2 µm 1.5 µminch801 SM +/- .004“ 0-4-0 .0001“ .00016“.00012“.00008“.00008“.00006“801 SGM +/- .004“ 0-4-0 .0001“ .00016“.00012“.00008“.00008“.00006“801 SGE +/- .004“ 0-4-0 .00005“ .00016“.00012“.00008“.00008“.00006“metric800 SR +/- 0.8 mm 0-40-0 0.01 mm 14 µm 10 µm 4 µm 5 µm 3 µm800 SRM +/- 0.2 mm 0-100-0 0.002 mm 5 µm 3 µm 3 µm 2 µm 1.5 µminch801 SR +/- .030“ 0-15-0 .0005“ .0005“ .0004“ .00016“ .0002“ .00012“801 SRM +/- .008“ 0-4-0 .0001“ .0002“ .00012“.00012““.00008“.00006“metric800 H +/- 0.4 mm 0-40-0 0.01mm • 13 µm 10 µm 3 µm 5 µm 3 µminch801 H +/- .015“ 0-15-0 .0005“ .0005“ .0004“ .00012“ .0002“ .00012“metric800 V +/- 0.4 mm 0-40-0 0.01 mm • 13 µm 10 µm 3 µm 5 µm 3 µm800 VGM +/- 0.1 mm 0-100-0 0.002 mm • 4 µm 3 µm 2 µm 2 µm 1.5 µminch801 V +/- .015“ 0-15-0 .0005“ .0005“ .0004“ .00012“ .0002“ .00012“801 VGM +/- .004“ 0-4-0 .0001“ .00016“.00012“.00008“.00008“.00006“* Only available in North America, Canada and Mexico; includes holding bar and clamp

+MarTest. Test Indicators4-Metrological characteristicsLength ofStyliOrder no. Order no.with kit* 14.5 mm 4305200 201530914.5 mm 4307200 201531014.5 mm 4301200 201534314.5 mm 4301250 201534414.5 mm 4305960 201531714.5 mm 4305950 201531614.5 mm 4307950 201531814.5 mm 4307970 2015311Deviation of readingNominal valueagainst the measuring forcein the direction of the measuring forceDesign features of MarTest Test Indicators 41.24 mm 4306200 201531241.24 mm 4306250 201531332.325 mm 4301300 201534641.24 mm 4306950 201531941.24 mm 4306960 201532014.5 mm 4308150 201531514.5 mm 4308200 20153149.155 mm 4308220 201534514.5 mm 4308960 201532114.5 mm 4308970 201532214.5 mm 4308985 2015323SHOCKPROOFMechanism• Shockproof• Anti magnetic• Movement bearings are jeweledwith 8 precious stones• Automatic matching to sensingdirection, thus ensuring error-freereading• Double lever supported in ballbearings, overload protectionprovided by slip clutch• Dial face is sealed with anO-Ring• Satin chrome finishedhousing• Contact pointwith carbide ball14.5 mm 4307250 201534814.5 mm 4308250 201534914.5 mm 4307960 201535014.5 mm 4308980 2015351MarTest - ApplicationsConcentricity of a shaftConcentricity of a sleeveCentering of a bore14.5 mm 4303200 201532814.5 mm 4303950 201532414.5 mm 4302200 201532714.5 mm 4302250 2015347Aligning a surfaceTesting parallelism14.5 mm 4302950 201532514.5 mm 4302960 2015326

-4-MarTest. Test IndicatorsMarTest standard versionsDIN2270800 S800 SGASHOCKPROOF800 SG800 SADIN2270Technical DataMeasuring Readings Dial dia. Measuring Length of Order no. Order no.range force styli with kit800 S ± 0.4 mm 0.01 mm 27.5 mm 0.15 N 14.5 mm 4305200 2015309800 SG ± 0.4 mm 0.01 mm 38 mm 0.15 N 14.5 mm 4307200 2015310800 SA ± 0.25 mm 0.01 mm 27.5 mm 0.1 N 14.5 mm 4301200 2015343800 SGA ± 0.25 mm 0.01 mm 38 mm 0.1 N 14.5 mm 4301250 2015344801 S1 ± .015” .001” 1.1” 0.15 N 14.5 mm 4305960 2015317801 S ± .015” .0005” 1.1” 0.15 N 14.5 mm 4305950 2015316801 SG ± .015” .0005” 1.5” 0.15 N 14.5 mm 4307950 2015318801 SGI ± .015” (± 0.3 mm) .0005” (0.01 mm) 1.5” 0.15 N 14.5 mm 4307970 2015311Supplied with:Plastic storage case, spanner for changing the styli, styli dia. 2 mm, mounting shaft 800 a8 (for metric versions),mounting shaft 800 a6 (800 SA, 800 SGA), mounting shaft 800 a3/8 (for inch versions)801 S10801 S02649,55Antimagnetic55Antimagnetic51710JeweledMarTest.001"151010JeweledMarTest.0005"1510ø 40,5*ø 30**801 SG505801 SGI50010 1057589910AntimagneticJeweledMarTest.0005"15101020AntimagneticJeweled.0005" / 0,01mm30 MarTest 30152010110°ø 213,617,89* 800 SG, 800 SGA, 801 SG,801 SGI** 800 S, 800 SA, 801 S1, 801 S

+MarTest. Test Indicators4-MarTest with resolution 0.002 mm/0.001 mm for higher accuracyDIN2270DIN2270SHOCKPROOF800 SM800 SGM800 SGEInductive Probe Millimar 1318see page 7-16Technical DataMeasuring Readings Dial dia. Measuring Length of Order no. Order no.range force styli with kit800 SM ± 0.1 mm 0.002 mm 27.5 mm 0.15 N 14.5 mm 4308150 2015315800 SGM ± 0.1 mm 0.002 mm 38 mm 0.15 N 14.5 mm 4308200 2015314800 SGE ± 0.07 mm 0.001 mm 38 mm 0.2 N 14.5 mm 4308220 2015345801 SM ± .004” .0001” 1.1” 0.15 N 14.5 mm 4308960 2015321801 SGM ± .004” .0001” 1.5” 0.15 N 14.5 mm 4308970 2015322801 SGE ± .004” .00005” 1.5” 0.15 N 14.5 mm 4308985 2015323Supplied with:Plastic storage case, spanner for changing the styli, styli dia. 2 mm, mounting shaft 800 a8 (for metric versions),mounting shaft 800 a3/8 (for inch versions)801 SM1012649,51723AntimagneticJeweledMarTest.0001"432ø 40,5*ø 30**801 SGM801 SGE7570***9994***210AntimagneticJeweled12210AntimagneticJeweled12110°13,68,3***ø 217,89,1***983MarTest.0001"433MarTest.00005"43* 800 SGM, 800 SGE, 801SGM, 801 SGE** 800 SM, 801 SM*** 800 SGE

-4-MarTest. Test IndicatorsMarTest with extra long styli for measuring in even difficult to access positions800 SL800 SGLSHOCKPROOF800 SGBTechnical DataMeasuring Readings Dial dia. Measuring Length of Order no. Order no.range force styli with kit800 SL ± 0.25 mm 0.01 mm 27.5 mm 0.07 N 41.24 mm 4306200 2015312800 SGL ± 0.25 mm 0.01 mm 38 mm 0.07 N 41.24 mm 4306250 2015313800 SGB ± 0.5 mm 0.01 mm 38 mm 0.07 N 32.3 mm 4301300 2015346801 SL ± .010” .0005” 1.1” 0.07 N 41.24 mm 4306950 2015319801 SGL ± .010” .0005” 1.5” 0.07 N 41.24 mm 4306960 2015320Supplied with:Plastic storage case, spanner for changing the styli, styli dia. 2 mm, mounting shaft 800 a8 (for metric versions),mounting shaft 800 a6 (800 SGB), mounting shaft 800 a3/8 (for inch versions)2649,5801 SL801 SGL174602 2AntimagneticJeweledMarTest.0005"8 8104646280AntimagneticJeweledMarTest.0005"102846ø 40,5*ø 30**110°* 800 SGL, 801 SGL, 800 SGB** 800 SL, 801 SL*** 800 SGB40,3 (31,4***)44,6 (35,7***)ø 210293***98126117***

+MarTest. Test Indicators4-MarTest styli can positioned horizontally to the dial face8h613,656DIN22705317SHOCKPROOFø 30299800 Hø 2110°Technical DataMeasuring Readings Dial dia. Measuring Length of Order no. Order no.range force styli with kit800 H ± 0.4 mm 0.01 mm 27.5 mm 0.25 N 14.5 mm 4303200 2015328801 H ± .015” .0005” 1.1” 0.25 N 14.5 mm 4303950 2015324Supplied with:Plastic storage case, spanner for changing the styli, styli dia. 2 mm, mounting shaft 800 a8 (for metric versions),mounting shaft 800 a3/8 (for inch versions)MarTest vertical modelSHOCKPROOF67531717,8800 V 800 VGMø 213,6ø 30**ø 40,5*DIN2270DIN22709110°* 800 VGM, 801 VGM** 800 V, 801 VTechnical DataMeasuring Readings Dial dia. Measuring Length of Order no. Order no.range force styli with kit800 V ± 0.4 mm 0.01 mm 27.5 mm 0.2 N 14.5 mm 4302200 2015327800 VGM ± 0.1 mm 0.002 mm 38 mm 0.25 N 14.5 mm 4302250 2015347801 V ± .015” .0005” 1.1” 0.2 N 14.5 mm 4302950 2015325801 VGM ± .004” .0001” 1.5” 0.25 N 14.5 mm 4302960 2015326Supplied with:Plastic storage case, spanner for changing the styli, styli dia. 2 mm, mounting shaft 800 a8 (for metric versions),mounting shaft 800 a3/8 (for inch versions)

-4-MarTest. Test IndicatorsMarTest with larger measuring range2649,5800 SR/SRMSHOCKPROOFø 40,517800 SRM758110°13,617,899ø 29Technical DataMeasuring Readings Dial dia. Measuring Length of Order no. Order no.range force styli with kit800 SR ± 0.8 mm 0.01 mm 38 mm 0.15 N 14.5 mm 4307250 2015348800 SRM ± 0.2 mm 0.002 mm 38 mm 0.15 N 14.5 mm 4308250 2015349801 SR ± .030” .0005” 1.5” 0.15 N 14.5 mm 4307960 2015350801 SRM ± .008” .0001” 1.5” 0.15 N 14.5 mm 4308980 2015351Supplied with:Plastic storage case, spanner for changing the styli, styli dia. 2 mm, mounting shaft 800 a8 (for metric versions),mounting shaft 800 a3/8 (for inch versions)MarTest - AccessoriesStyluseswith rubycontact pointM2ldStyluseswith carbidecontact pointSpanner for changingthe styluses 4305868ModelStylusesStylus- Carbide contact point Ruby contact pointlength l d dCat.-no. dia. 1 mm dia. 2 mm dia. 3 mm Cat.-no. dia. 2 mm800 S/801 S1/801 S800 SG/801 SG800 SA800 SGA800 SM/801 SM800 SGM/801 SGM801 SGE14.5 mm 800 ts 4305870 4305850 4305871 800 tsr 4309051800 SR/801 SR800 SRM/801 SRM800 H/801 H800 V/801 V800 VGM/801 VGM800 SGE 9.1 mm 800 te 4308851 4308850 4308852 800 ter 4309050800 SL/801 SL800 SGL/801 SGL41.24 mm 800 tl 4306851 4306850 4306853 800 tlr 4309053800 SGB 32.3 mm 800 tb 4301851 4301850 4301852 800 tbr 4309052

+MarTest. Test Indicators4-Martest - AccessoriesMounting shaft for dovetailMounting shaft dia. d Order no.mm800 a8 8 4305865800 a6 6 4301865800 a4 4 4305885800 a1/4 1/4“ 4305895800 a3/8 3/8“ 43058752517800 aø12ødCentering support rods 801 v• For aligning and centeringwork pieces on machine tools• Swivel mounting clamp andfine adjustment• Stainless steel rodsMountingbore dia.8 mmSwivel range ofmounting clamp 180°801 vIndicator notincluded.Stand 801 pOrder no. 4309070max. 130180• With swivel holder• Base with V-groove 140°Total height 150 mmMountingbore dia. 4 and 8 mmColumn dia. 8 mmBase surface 65 x 40 mmø14Order no. 4309090Indicator not included.Leveling Table TE-20Cuts set-up time 60% or more for many height gagemeasurements.• The leveling table, TE-20, permits you to quickly bring the surfaceof a part into alignment with a surface plate in both planes.Completely eliminates shimming. Saves so much time that, usedonly occasionally, it will pay for itself in two weeks.• The top plate is stress-relieved steel providing about 67 squareinches of work area. It is drilled and tapped for fixtures. Fine pitchscrews and large knobs assure precisely controlled adjustments.Works with any type of height gage.Typical checks which require careful positioning of work becauserest surface is not sufficiently parallel to other work surfaces.Leveling Table compensates for error quickly, drastically reducesset-up time.• Operation is simple. Height gage readings are taken at edges ofthe surface to be aligned. Each plate, independently adjustableat right angles to the other, is angled as required for precisealignment.Flatness = .025 mm / .001“Adjustment Top Plate Bottom PlateParallelism Step Height Flatness Center distanceTotal ± 1° 30‘ ± 1° 30‘

-4-10MarTest. Test IndicatorsMartest - AccessoriesHolder 800 hØ6h6Universal centering support frame 800 bOrder no. 43058939ø8abø4Ød260°30Ø6 H744Dimensions Order no.a b800 h1 9x9 100 4305888800 h2 1/4“ x 1/2“ 4“ 43058895860°Indicator not included.Universal clamp 800 kUniversal holder with dovetail clamp8Ød1800 hs8800 h1 with800 k860°aØ cbDimensions Order no.dia. d1 dia. d2800 k8 4 8 4305891800 k3/8 5/32“ 3/8“ 4305892Indicator notincluded.DimensionsOrder no.a b dia. c800 hs8 100 124 8 4305886800 hs3/8 4“ 5“ 3/8“ 4305887Indicator notincluded.Ball Clamp• Dovetail and ball for indicator mounting and omni-directionalorientationOrder no.AT-50Double-jointed Clamp• Reaches up to 127 mm / 5“ with easy positioning for manyapplications including milling machine and Jig BorersOrder no. AT-100Jig Borer Attachment• Furnished with two rods and clamp for fast machine mountingOrder no. RD-21Holding Bar• Normally furnished with MarTest models. Three-inch lengthprovides ample reach for most applicationsOrder no. HB-2157Swivel Clamp• Normally furnished with MarTestmodels. Allows indicator to bemounted on most indicator standsand fixturesOrder no. CP-2199

+MarTest. Test Indicators4-11Martest - AccessoriesTest Stand 1492B• Use with any MarTest Indicator - Support arms stepped at one end(.218in dia.) for Swivel Clamp (CP-2199).• Accommodates Vertical and Horizontal lug back mounts for AGDtype Indicators.• Bases have powerful “ON/OFF” permanent magnets which holdfrom any of four faces - three sides or bottom.Indicator notincluded.Base Dimensions Main Post Support Arm Order no.W x L x H Length Diameter Length Diametermm (inch) mm/inch mm/inch mm/inch mm/inch60 x 48 x 59 (2.4“ x 1.9“ x 2.2“) 178/ 7“ 10/ .47“ 165/ 6.5“ 9.9/ .39“ 1492B-560 x 48 x 59 (2.4“ x 1.9“ x 2.2“) 178/ 7“ 10/ .47“ 149/ 5.9“ 9.9/ .39“ 1492B-10114 x 48 x 59 (4.5“ x 1.9“ x 2.2“) 401/ 15.8“ 20/ .79“ 200/ 7.9“ 14/ .55“ 1492B-15Measurements are mm/inch. All models furnished with post clamp and indicator mounting clamp.Style 1492B-10 has fine adjustment on post clamp.Transfer Stand 2300• Fine adjustment conveniently located in base.• Three-point base pads improve accuracy.• Contoured shape facilitates movement.• Use with any Testmaster Indicator - stud accommodates SwivelClamp (CP-2199).• EHE-2048 Gage head requires a CP-116 Clamp.Indicator notincluded.Base Dimensions Column Maximum Reach Mounting Order no.W x L x H (dia. x H) vertical (base to studcapacity contact point) dia.mm (inch) mm/inch mm/inch mm/inch mm/inch76 x 110 x 45 (3 x 4.375 x 1.75“) 25 x 430/ .995 x 17“ 457/ 18“ approx. 86/ 3.375“ 5.55/ .218“ 2300