Russell RL060P - Geotech Environmental Equipment

Chapter VElectrode Care and MaintenanceFor best results, always keep the pH/ORP electrode bulb wet. Store the pH/ORP glassbulb with pH electrode storage solution. Other pH buffers are also suitable. NEVERuse deionized water for storage. Wash the probe thoroughly with distilled water aftereach use. Because your pH electrode is susceptible to contamination or dirt, clean itevery 1 to 2 months depending on the extent and condition of use.Clean the pH/ORP electrode using a mild detergent. Wipe the probe with a soft tissuepaper. Avoid touching the glass membrane with your fingers. Wash thoroughly in tapwater and then in distilled water. Recalibrate the meter after cleaning the electrode.Thermo Electron CorporationRussell RL060P15