You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Photo-optical smoke detector<br />
FDO500 cod. SD4800121<br />
Low profile photo-optical smoke detector, complete with self-learning circuit<br />
and short-circuit isolator.<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
•<br />
Smoke detectors work according to the light scattering principle caused by<br />
smoke particles present in the air. The smoke detector has the automatic gain<br />
control function; a microcontroller calculates reading compensation to keep<br />
constant sensitivity and corrects any level increase due to dust depositing<br />
into the analysis cell. Smoke detectors shall be installed in places protected<br />
against draughts which may divert the flow of combustion particles and in<br />
places where the common activities performed do not cause gas material<br />
fires.<br />
Power supply: 20Vdc (modulated voltage between -15% and + 10%)<br />
Average absorption at rest: 250 mA@20Vdc<br />
Absorption at alarm: 2mA@20Vdc<br />
Two-colour led: red alarm - green regular operation<br />
Relative humidity max: 93%<br />
Working temperature: 0 ÷ 50°C<br />
Weight: 70 g<br />
Dimensions: ø 90 x 31 (H) mm<br />
Certificato EN54 parte 7, certification number: 1293-CPD-0082<br />
RIVELATORI CONVENZIONALI<br />
Heat detector<br />
FAP500 DIGITAL SYSTEM<br />
FAP500 SYSTEM: DETECTORS<br />
FDT500 cod. SD5700121<br />
Low profile heat detector, complete with self-learning circuit and short-circuit<br />
isolator.<br />
• Heat detectors monitor the temperature values in the area where they are<br />
installed.<br />
• A microcontroller analyses and compares the signal received from a NTC<br />
type temperature detector and activates the alarm if the read temperature<br />
exceeds 58°C.<br />
• Power supply: 20Vdc (modulated voltage between -15% and + 10%)<br />
• Average absorption at rest: 250 mA@20Vdc<br />
• Absorption at alarm: 2mA@20Vdc<br />
• Static alarm threshold: 58°<br />
• Two-colour led: red alarm - green regular operation<br />
• Relative humidity max: 93%<br />
• Working temperature: 0 ÷ 50°C<br />
• Weight: 70 g<br />
• Dimensions: ø 90 x 40 (H) mm<br />
• Compliant with EN54 Standards, part 5 class A1S, certification number:<br />
1293-CPD-0084.<br />
44<br />
FDO500<br />
FDT500