FIRE DETECTION - Urmet

Modules
ADDRESSED FIRE DETECTION SYSTEMS
ACCESSORIES FOR ADDRESSED SYSTEMS
MCR/DIN-2000 cod. SC9110121
Analogue addressed module with collective addressing. The module allows to
manage a secondary line, made up of conventional detectors. Max number
of elements is 10.
• The interface has 4 O.C. repetitions and 4 relays for failure, alarm 1, alarm
2 reset status.
• Supply voltage: 20÷30Vdc
• Working voltage: 18Vdc modulated
• Rest absorption: 1 mA
• Alarm absorption: 20 mA per alarmed relay
• Repetition outputs (O.C.): 100 mA max
• Relay output: 1A @ 24Vdc
• Operation temperature: -10÷50°C
• Dimensions (HxLxD): 112 x 168 x 50 mm.
ISO/BP cod. SC6H00121
Short-circuit analyser module for lines for analogue detections; the module
is designed to ensure the operation of the detectors and/or pushbuttons
that are connected to the same line, in case a short-circuit occurs.
• The module is contained in smoke detector cap.
• On the two sides of the cap there are yellow leds having the task of signalling
the section where the short-circuit is being detected.
• For detection line connection, ZB/200 base is used.
• The module needs no additional power supply.
• Working voltage: 18 Vdc modulated
• Average absorption: 250 µA
• Operation temperature: -20°C to + 50°C
• Protection degree: IP 43
• Dimensions: Ø 100 mm H.45 mm
ISO/BASE cod. SC4H00121
Short-circuit analyser module for lines for analogue detections; the module
is designed to ensure the operation of the detectors and/or pushbuttons
that are connected to the same line, in case a short-circuit occurs.
• Yellow leds having the task of signalling the section where the short-circuit is
being detected.
• The module is contained in ZB/215 connector block.
• The module needs no additional power supply.
• Working voltage: 18 Vdc modulated
• Average absorption: 250 µA
• Operation temperature: -20°C to + 50°C
• Relative humidity: 95 % Max RH non condensing
• Dimensions: Ø 100 mm H.45 mm
MCR/DIN-2000
ISO/BP
ISO/BASE
29