section 7 - Index of

Tee Transfer Conditionally Teetion accumulator D1 . If address register S2 is used as an address pointer into an array ofdata, the address of the desired value is stored in the address register D2. The Tecinstruction may be used after any instruction and allows efficient searching and sortingalgorith ms.The Tcc instruction uses t~e internal data ALU paths and internal address ALU paths.The Tce instruction does not affect the condition code bits.Note: This instruction is considered to be a move-type instruction. Due to instructionpipelining, if an AGU register (Mn, Nn, or Rn) is directly changed with this instruction, thenew contents may not be available for use until the second following instruction. See therestrictions discussed in A9.6 - R, N, and M Register Restrictions on page A-31 O.Example:CMP XO,ATGT XO,A RO,R1;compare XO and A (sort for minimum);transfer XO -. A and RO -. R1 if XO