section 7 - Index of

Table A-1 Instruction Description Notation (Continued)Addressing Mode Operators« 110 Short Addressing Mode Force Operator< Short Addressing Mode Force Operator> Long Addressing Mode Force Operator# Immediate Addressing Mode Operator#> Immediate Long Addressing Mode Force Operator#< Immediate Short Addressing Mode Force OperatorMode Register (MR) SymbolsDMDouble Precision Multiply Bit Indicating if the Chip is in Double Precision Multiply ModeLFLoop Flag Bit Indicating When a DO Loop is in ProgressTTrace Mode Bit Indicating if the Tracing Function has been EnabledS1, SO Scaling Mode Bits Indicating the Current Scaling Mode11,10 Interrupt Mask Bits Indicating the Current Interrupt Priority LevelCondition Code Register (CCR) SymbolsStandard Definitions (Table A-5 in Section A.5 Describes Exceptions)SLEUNZVCBlock Floating Point Scaling Bit Indicating Data Growth DetectionLimit Bit Indicating Arithmetic Overflow and/or Data Shifting/LimitingExtension Bit Indicating if the Integer Portion of A or B is in UseUnnormalized Bit Indicating if the A or B Result is UnnormalizedNegative Bit Indicating if Bit 55 of the A or B Result is SetZero Bit Indicating if the A or B Result Equals ZeroOverflow Bit Indicating if Arithmetic Overflow has Occurred in A or BCarry Bit Indicating if a Carry or Borrow Occurred in A or B Result