INSTALLATION INSTRUCTIONS: Viewline 85 mm - Howard ...
INSTALLATION INSTRUCTIONS: Viewline 85 mm - Howard ...
INSTALLATION INSTRUCTIONS: Viewline 85 mm - Howard ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>INSTALLATION</strong> <strong>INSTRUCTIONS</strong>: <strong>Viewline</strong> <strong>85</strong> <strong>mm</strong>Sumlog2. Setting the unit and alarm threshold10/09TU00-0752-6207102 1-10 7GB1. Activate T. 30 (8-pin - Pin1)2. Deactivate T. 15 (8-pin - Pin4)3. Press and hold Mode key (14-pin - Pin 12)Activate T. 15Release Mode keyPress and hold Mode keyBy briefly pressing the Mode key, you can switch between24h and 12h (AM/PM) clock format.Press and hold Mode keyPress the Mode key to change the water temperatureunit from °C to °F.Press and hold Mode keyPress Mode key briefly to change the water depthunit from von m to ft.Press and hold Mode keyPress Mode key brieflyPress and hold Mode keySet alarm threshold is displayed; the first digit flashes.Press Mode key brieflyThe flashing digit increases by 1. If the flashing digit is “9”,the display returns to “0”Press and hold Mode keyThe next lower digit flashes.Press Mode key brieflyThe flashing digit increases by 1. If the flashing digit is “9”,the display returns to “0”TU00-0752-6207102Continue until the complete alarm threshold is set.Press and hold Mode keyTechnische Änderungen vorbehalten - Technical details subject to changeDeactivate T. 15. This saves the unit and the alarm thresholdin the display.
Change language