Unit ConversionsTorque ConversionsInertia ConversionsPresent Units Convert To Multiply By Present Units Convert ToMultiply ByGram-centimeters newton-meters ------- 0.0000981Gram-cm 2 ounce-inches 2 ----0.00546745Gram-centimeters ounce-inches --------- 0.0138874Gram-cm 2 ounce-inch-sec 2 --0.000014161Gram-centimeters pound-inches --------- 0.000868Gram-cm 2 pound-inches 2 ----0.000341716Gram-centimeters pound-feet ------------ 0.0000723Gram-cm 2 pound-inch-sec 2 --0.000000885Newton-meters gram-centimeters ---- 10,197.162Gram-cm 2 pound-feet-sec 2 --0.000000074Newton-meters ounce-inches --------- 141.612Ounce-inches 2 gram-cm 2 --------- 182.901Newton-meters pound-inches --------- 8.85Ounce-inches 2 ounce-inch-sec 2 --0.00259008Newton-meters pound-feet ------------ 0.73756Ounce-inches 2 pound-inches 2 ----0.0625Ounce-inches gram-centimeters ---- 72.0077Ounce-inches 2 pound-inch-sec 2 --0.00016188Ounce-inches newton-meters ------- 0.007062Ounce-inches 2 pound-feet-sec 2 --0.00001349Ounce-inches pound-inches --------- 0 .0625 Ounce-inch-sec 2 gram-cm 2 --------- 70,615 .4Ounce-inches pound-feet ------------ 0.005208Ounce-inch-sec 2 ounce-inches 2 ---- 386.0Pound-inches gram-centimeters ---- 1,152.0Ounce-inch-sec 2 pound-inches 2 ---- 24.13045Pound-inches newton-meters ------- 0.11299Ounce-inch-sec 2 pound-inch-sec 2 --0.0625Pound-inches ounce-inches --------- 16.0Ounce-inch-sec 2 pound-feet-sec 2 ---0.00520833Pound-inches pound-feet ------------ 0.08333Pound-inches 2 gram-cm 2 --------- 2,926.41Pound-feetgram-centimeters ---- 13,825.5Pound-inches 2 ounce-inches 2 ---- 16.0Pound-feetnewton-meters ------- 1.3558Pound-inches 2 ounce-inch-sec 2 --0.0414413Pound-feetounce-inches --------- 192.0Pound-inches 2 pound-inch-sec 2 --0.00259008Pound-feetpound-inches --------- 12.0Pound-inches 2 pound-feet-sec 2 --0.00021584Pound-inch-sec 2 gram-cm 2 --------- 1,129,850.0Distance ConversionsPound-inch-sec 2 ounce-inches 2 ---- 6,177.4Present Units Convert To Multiply By Pound-inch-sec 2 ounce-inch-sec 2 -- 16.0Pound-inch-sec 2 pound-inches 2 --- 386.0Arc-minutes degrees ----------- 0.016666Pound-inch-sec 2 pound-feet-sec 2 --0.0833333Arc-seconds degrees ----------- 0.000277Pound-feet-sec 2 gram-cm 2 --------- 13,558,200.0Centimeters inches ------------ 0.3937Pound-feet-sec 2 ounce-inches 2 --- 74,128.9Centimeters feet --------------- 0.03280Pound-feet-sec 2 ounce-inch-sec 2 -- 192.0Centimeters microns ---------- 10,000.0Pound-feet-sec 2 pound-inches 2 --- 4,633.06Degreesarc-minutes ----- 60.0Pound-feet-sec 2 pound-inch-sec 2 - 12.0Degreesarc-seconds ----- 3,600.0Degreesradians ---------- 0.017453Load ConversionsFeetcentimeters ------ 30.48Feetmeters ----------- 0 .3048 Present Units Convert ToMultiply By<strong>Inc</strong>hescentimeters ----- 2.54Gramsnewtons ----------------- 0.009806<strong>Inc</strong>hes<strong>Inc</strong>hesKmmeters-------------------------0.00002540.0254GramsGramsouncespounds-------------------------------------0.035280.002204<strong>Inc</strong>hesmicrons ---------- 25,400.0Kilograms pounds ------------------ 2.2046<strong>Inc</strong>hesmillimeters ----- 25.4Newtonsgrams ------------------- 101.971KmMetersMetersinchesfeetinches-------------------------------------39,370.03.280839.37NewtonsNewtonsOuncesouncespoundsgrams-------------------------------------------------------3.596920.22480828.3495Metersmicrons ---------- 1,000,000.0Ouncesnewtons ----------------- 0.27802Micronscentimeters ----- 0.0001Ouncespounds ------------------ 0.0625Micronsinches ------------ 0.00003937Poundsgrams ------------------- 453.592Micronsmeters ----------- 0.000001Poundskilograms --------------- 0.45359Micronsmillimeters ----- 0.001Poundsnewtons ----------------- 4 .44824MillimetersMillimetersRadiansinchesmicronsdegrees---------------------------------0.039371,000.057.295779PoundsPoundsTonsouncestonspounds--------------------------------------------------------16.00.00052,000.0Reference : Handbook of Tables for Applied Engineering ScienceSpecifications subject to change without noticeLINTECH ® Positioning <strong>Components</strong>
Terms of SaleTo OrderAny standard positioning component from LINTECH may beordered by mail, email, phone, or fax from an <strong>Automation</strong> Specialistin your area. To obtain the name of your local <strong>Automation</strong>Specialist call:DeliveryToll Free:Phone:Fax:Web Site:E-Mail:LINTECH ®1845 Enterprise WayMonrovia, CA 91016(800) 435 - 7494(626) 358 - 0110(626) 303 - 2035All shipping promises are made in good faith. Any shipping datesappearing on acknowledgments of orders or given to a customerin any other manner are approximate. Where the customer delaysin supplying information necessary to proceeding with an order,the date of shipment may be extended accordingly. Standardproducts from LINTECH are usually available for delivery within1 to 6 weeks of receipt of a purchase order. However, componentshortages, labor disputes, or any other unforeseen circumstancemay delay the delivery of an order. LINTECH shall not be heldliable under any circumstance. All products are shipped F.O.B.Monrovia, CA. LINTECH packages all standard and customproducts carefully. However, LINTECH is not liable for damageincurred during shipment. Contact the carrier immediately ifdamage to a package or shipment is noticed upon receipt of suchshipment.Payment Termswww.LintechMotion.comLintech@LintechMotion.comAll required options should be reviewed using the part numberingguide for each model series. Your local <strong>Automation</strong> Specialistor factory personnel can assist you with any questions you mayhave.Unless otherwise specified, payment shall be made by C.O.D,credit card (AMEX, Visa, or Master Card), or net thirty (30) days(pending credit approval) from date of shipment of the itemspurchased hereunder in U.S. currency. LINTECH reserves theright to require deposit payments on non-standard items, customs,or product built to Buyer's designs or specifications. Amounts nottimely paid shall bear interest at the rate of 1.5% for each monthor a portion thereof that Buyer is late in making payments. Noresponsibility is assumed by LINTECH for damages arising fromdelivery delays, fires, strikes, material shortages, accidents, or anyother cause whatsoever, and purchase orders are accepted subjectMinimum Order AmountLINTECH requires a minimum of $30 List Price U.S. currencyon all orders.WarrantyAll LINTECH positioning systems are guaranteed to be freefrom defects in material and workmanship, under normal use, fora period of one year after date of shipment. This warranty coversthe repair or replacement of a product when it is sent prepaid toLINTECH. LINTECH does not assume liability for installation,abuse, alteration, insufficient application data provided for adesign, or misuse of any positioning system. Products furnishedby LINTECH, but not manufactured by LINTECH (motors,gearheads, encoders, amplifiers, etc....), are subject to the manufacturersstandard warranty terms and conditions.ReturnsAny product requiring a return to LINTECH (for warranty ornon-warranty repair) requires pre-approval from the factory priorto shipment. Contact the customer service department at (800)435-7494 in order to obtain a RMA (Return Materials Authorization)number. At that time, please have your system Model & Serialnumbers available, along with the reason for the return. TheRMA number should be clearly marked on the returned packagelabel and your packing list, or shipping document. Return productfreight prepaid in its original package or one with comparableprotection. LINTECH will not accept return shipments sentfreight collect. Product damage incurred during return shipment,from poor packaging, will not be warranted by LINTECH.Keeping original packing materials is recommended until initialinspection and testing is completed.Dimensions and Product ChangesPublished dimensions shown in LINTECH catalogs are knownto be accurate at time of printing. LINTECH shall not be heldliable, under any circumstances, for any wrongly documenteddimension or specification. Changes in design are made wheneverLINTECH believes its products will improve by the change. Noobligation to incorporate these changes in units manufacturedprior to a change will be assumed.CancellationsAll items entered for production and on which a cancellation isrequested shall be paid for on the basis of actual cost of labor,materials, and supplies applied to the production of such itemsplus proper overhead expenses determined in accordance withgood accounting practice, plus 25% of the total of such cost andexpenses; provided that such cost and expense plus 25% shall inno case exceed 100% of the quoted price of original order. Uponcancellation, LINTECH may dispose of materials used in themanufacture of cancelled order as it sees fit.Specifications subject to change without noticeLINTECH ® Positioning <strong>Components</strong>
- Page 2:
Welcome to LINTECHOur local technic
- Page 9 and 10: Design ConsiderationsHow to Select
- Page 11 and 12: Design ConsiderationsLoad Capacitie
- Page 13 and 14: Design ConsiderationsLoad Capacitie
- Page 15 and 16: Design ConsiderationsLoad Capacitie
- Page 17 and 18: Design ConsiderationsAll individual
- Page 19 and 20: LBC, LBO, SLBC,SLBO, DLBC, & DLBOLi
- Page 21 and 22: Technical ReferenceLBC, LBO, SLBC,
- Page 23 and 24: Technical ReferenceSLBC & SLBO Seri
- Page 26 and 27: Technical ReferenceTRCA SeriesDimen
- Page 28 and 29: OptionsTRCA Series(- P) Pre-Machine
- Page 30 and 31: NotesB-11LINTECH ®Positioning Comp
- Page 32 and 33: Ordering GuideSL SeriesSL 12 - SS -
- Page 34 and 35: Ordering GuideES, ARS & LSRS Series
- Page 36 and 37: Technical ReferenceARS SeriesDimens
- Page 38 and 39: Ordering GuideSA & TRSA SeriesSA 12
- Page 40 and 41: Technical Reference- 6, 12, 18, 24
- Page 42 and 43: LINTECH ®Positioning ComponentsTec
- Page 44 and 45: LINTECH ®Positioning ComponentsTec
- Page 46 and 47: LINTECH ®Positioning ComponentsTec
- Page 48 and 49: Technical Reference - 6, 12, 18, 24
- Page 50 and 51: Technical Reference - 36, 42, 48, 5
- Page 52: Technical Reference - 66, 72, 84, 9
- Page 55 and 56: Technical Reference - 120, 144, 168
- Page 57: OptionsSL, ES, ARS, LSRS, SA & TRSA