OptionsSL, SA & TRSA SeriesReduced Diameters, Coaxial Holes & End StopsThe standard tolerance for reduced diameters is +/- .001 inches. The concentricity is .002 inches TIR. The shaft may beannealed and soft around the shaft cirucmference adjacent to the reduced diameter. Coaxial holes are drilled and tapped in thecenter of the shaft ends and radial holes can be drilled and tapped as desired. The concentricity of the holes is .005 inches TIR.Reduced DiametersEnd StopsCoaxial & Radial HolesButted, Doweled, and Threaded & Ground JointsStandard shaft assemblies cannot be combined to create longer lengths, as the rolling elements of re-circulating linear bearingswill "jam" at the joined ends due to the shaft chamfer. For those long length or custom applications, LINTECH providesseveral options for joining shaft assemblies. Butted, doweled, threaded, and ground joints are available with all shaft lengthsand diameters. All of these options will have the standard chamfer removed from the shaft ends. The concentricity of doweledjoints is < .001 inches, while the concentricity of butted joints will depend upon the user mounting surface.Butt JointDowel JointThreaded and Ground JointSpecifications subject to change without noticeC-25LINTECH ®Positioning <strong>Components</strong>
OptionsSL, ES, ARS, LSRS, SA & TRSA SeriesCustom Assembly Lengths & WidthsCustom lengths and widths (shorter and longer) not shown can be provided upon request. Contact Factory.Metric Shafting & Bearings"True metric" shafting (SL series or other shaft classes) and bearings (LBC, LBO, SLBO, or SLBC) are available uponrequest. All machining options also offer metric holes, etc.. Contact Factory.Chrome Plated ShaftsFor applications in high moisture, high humidity, clean room, or highly corrosive environments, chrome plating of theshafts will offer superior resistance to corrosion. The process uniformly deposits dense, hard, high Chromium alloy onto theshaft, and has a Rockwell C hardness value of 67-72. This process also conforms to MIL Spec: (MIL-C-23422). The chromeplating bonds to the parent steel and will not crack or peel off under the high point loading of the balls on the shaft. Thischrome plating process differs from normal hard chrome which just lays on the surface of the part plated. The "-CR" optionwithin the part number will have the shaft chrome plated.Tubular & Stainless Steel ShaftsShafting is avilable upon request in Tubular size. Contact the factory if this is desired. The -SS option within the partnumber will change the shafts to 440C stainless. The stainless option is available for standard or Tubular shafting.CSupport FinishesThe standard anodized aluminum finish can be changed to meet the requirements needed for operation in clean rooms,food processing facilities, highly corrosive environments, or for different appearances. The standard enamel or natural steel finishcan also be changed. Available options are clear or color anodized, chem-film, nickel plated, chrome plated, different oxidecolor finishes, or painted per customer specifications.Shaft End StopsEnd stops are available for every shaft assembly size and length. They provide a mechanical stop for linear bearings toprevent them from sliding off the shaft ends. The shaft ends are drilled, tapped, and a washer is installed using a cap screwand lock washer.Number ofEnd Stops(2)NominalShaft Dia.Dimensions(inches)(see model #) (inches) A B C D(1)Cap Screw1E1, E2, E3, E4 0.500 .375 .062 1.125 4E1, E2, E3, E4 0.625 .453 .062 1.375E1, E2, E3, E4 0.750 .532 .062 1.625E1, E2, E3, E4 1.000 .656 .109 1.812E1, E2, E3, E4 1.250 .750 .125 2.250E1, E2, E3, E4 1.500 .750 .125 2.6251E1, E2, E3, E4 2.000 .750 .125 3.250 2516387161212DACBNotes:(1) Cap screw for end stops have black oxide finish. End stop & cap screw lock washers are Cadmium plated (QQ-P-416 Type II).(2) When only Specifying one end stop (E1) for SA, or two end stops for the TRSA (E2), the end stops will be installed on the left hand end of the assembly, asdepicted by the above drawing, unless specified otherwise.Specifications subject to change without noticeLINTECH ®Positioning <strong>Components</strong>C-26
- Page 2:
Welcome to LINTECHOur local technic
- Page 9 and 10: Design ConsiderationsHow to Select
- Page 11 and 12: Design ConsiderationsLoad Capacitie
- Page 13 and 14: Design ConsiderationsLoad Capacitie
- Page 15 and 16: Design ConsiderationsLoad Capacitie
- Page 17 and 18: Design ConsiderationsAll individual
- Page 19 and 20: LBC, LBO, SLBC,SLBO, DLBC, & DLBOLi
- Page 21 and 22: Technical ReferenceLBC, LBO, SLBC,
- Page 23 and 24: Technical ReferenceSLBC & SLBO Seri
- Page 26 and 27: Technical ReferenceTRCA SeriesDimen
- Page 28 and 29: OptionsTRCA Series(- P) Pre-Machine
- Page 30 and 31: NotesB-11LINTECH ®Positioning Comp
- Page 32 and 33: Ordering GuideSL SeriesSL 12 - SS -
- Page 34 and 35: Ordering GuideES, ARS & LSRS Series
- Page 36 and 37: Technical ReferenceARS SeriesDimens
- Page 38 and 39: Ordering GuideSA & TRSA SeriesSA 12
- Page 40 and 41: Technical Reference- 6, 12, 18, 24
- Page 42 and 43: LINTECH ®Positioning ComponentsTec
- Page 44 and 45: LINTECH ®Positioning ComponentsTec
- Page 46 and 47: LINTECH ®Positioning ComponentsTec
- Page 48 and 49: Technical Reference - 6, 12, 18, 24
- Page 50 and 51: Technical Reference - 36, 42, 48, 5
- Page 52: Technical Reference - 66, 72, 84, 9
- Page 55: Technical Reference - 120, 144, 168
- Page 59 and 60: Terms of SaleTo OrderAny standard p