Catalog – Components - Allied Automation, Inc.

OptionsSLBC, SLBO, DLBC, DLBO & TRCA SeriesCustom Carriage SizesCustom sizes (wider or longer) not shown in this catalog can be provided upon request. This will allow for larger rail andbearing spacing (d 1 & d 2 dimensions).Custom Carriage Material & FinishesThe standard material is aluminum with black anodized finish. Aluminum plates can be finished in many different colors.Plates can also be provided utilizing steel. If steel is used, the plate can be provided with a black oxide finish. Chrome platedand many other custom alternatives are available. Greater plate thickness is available upon request.Other Plate & Bearing ModificationsBThe bearings or carriage plates can be modified to meet the specific user mounting requirements. Modifications can also bemade to the carriage plates to allow for thru holes and other special "cut-outs".(- L) Bearing LocksThis option adds an aluminum clamping block to the bearing pillow block which provides for a manual lock of the bearingto the shaft. The hand wheel with threaded shaft presses into a bronze insert which makes contact to provide a "pressure lock"to the shaft. The threaded steel screw will not back drive and does not make physical contact with the steel shaft (no steel tosteel contact). Below please find the dimensional data for this option. The lock will be installed as shown below when orderedwith an SLBC, SLBO, DLBC, DLBO, or TRCA. Multiple locks can be installed onto a TRCA assembly.BearingDiameter(inches)ABDimensions(inches)CDEF8 - 0.500 1.68010 - 0.625 1.87512 - 0.750 2.06716 - 1.000 2.31220 - 1.250 3.12524 - 1.500 3.62532 - 2.000 4.6001.721.531.461.341.661.461.452.002.002.002.002.502.502.500.500.500.500.500.750.750.750.560.500.370.190.170.05---2.002.502.753.254.004.756.00FABD1.00CELINTECH ®Positioning ComponentsSpecifications subject to change without noticeB-10