GSE 350IS / GSE 355IS Service Manual - Advanced Weigh ...

To access the previous parameter1. Press [PRINT]2. Press [SELECT]3. Repeat [PRINT] + [SELECT] to back up one parameter.When accessing a parameter, the parameter number appears briefly. The display thentoggles between the parameter name and selection. Pressing [UNITS] will againbriefly display the parameter number.4.2.2 Model 355 I.S.To advance to the next parameter1. Press [SELECT]2. Continue pressing [SELECT] to advance through the parameter map.To access a specific parameter (for example P200)1. Key in [2] [0] [0] [SELECT]To access the previous parameter1. Press [ . ]2. Press [SELECT]3. Repeat [ . ] [SELECT] to back up one parameter.4.3 Changing a Parameter Value4.3.1 Selection ParametersSelection parameters have a pre-defined list of choices to pick from. Each choice isnumbered and corresponds to a certain value. The choice number is shown to the rightof the decimal point within the parameter number. Repeatedly pressing [TARE] (Model350 I.S.) or [ENTER] (Model 355 I.S.) while viewing a selection parameter cyclesthrough the available choices, or you can key in the choice number.Model 350 I.S. and Model 355 I.S. Service Manual 49