GSE 350IS / GSE 355IS Service Manual - Advanced Weigh ...

4.1.2 Model 355 I.S.To prevent accidental changes to the indicator setup, a sequence of keystrokes areused to gain access to the Setup Mode. If the indicator is set for remote display, referto page 107 for instructions on accessing the setup mode.1 0 02 3 6 4 0These keystrokes must be made within five seconds, or the indicator will return to theWeigh Mode.To access the Setup Mode:1. From the Weigh Mode, key in [1] [0] [0] [SELECT]2. Key in [2] [3] [6] [4] [0] [ENTER]To access Setup in a view-only mode:1. From the Weigh Mode, key in [1] [0] [0] [SELECT]2. Press [ENTER]4.2 Selecting a Parameter4.2.1 Model 350 I.S.To advance to the next parameter1. Once in the setup mode, press [SELECT]2. Continue pressing [SELECT] to advance through the parameter map.To access a specific parameter1. Press [PRINT] to select the first digit.2. Press [UNITS] to advance to the next digit.3. Press [PRINT] to select the next digit.4. Press [UNITS] to advance to the next digit.5. Press [PRINT] to select the next digit.6. Press [SELECT] to advance to the parameter.48Model 350 I.S. and Model 355 I.S. Service Manual