GSE 350IS / GSE 355IS Service Manual - Advanced Weigh ...

2.11 Weigh Mode FunctionsThe Model 350 I.S. and Model 355 I.S. keypads have five primary Weigh Modefunctions:Performs a gross zero and selects the gross mode.Initiates data transmission out the selected communication port.Toggles the units of measure between lb, kg, g, lb oz, oz.Tares any displayed weight and selects the net mode.Toggles the display between GROSS, NET, QUANTITY and setpoint TARGETS(if enabled).2.12 Entering a Tare Value (Model 350 I.S.)If a tare value is known, it is possible to enter that value into the tare register. Followthe steps below.1. From the tare mode use the [PRINT] key to scroll in the first number.2. Press the [UNITS] key to move to the next digit.3. Repeat steps 1 and 2 until the desired number is showing on the display.4. Press the [TARE] key to accept the entered tare value.2.13 Entering a Tare Value (Model 355 I.S.)If a tare value is known, it is possible to enter that value into the tare register. Followthe step below.1. Key in the known tare value with the numeric keys and press [TARE]. Thedisplay will access the net mode.Model 350 I.S. and Model 355 I.S. Service Manual 29