GSE 350IS / GSE 355IS Service Manual - Advanced Weigh ...

Hex Decimal SymbolPercentEquivalentMaster /RemoteActionF0 240 %p M Print Key/ Arrow Up KeyF2 242 %r M Remote Key 1F3 243 %s M Select KeyF4 244 %t M Tare KeyF5 245 %u M Units Key/ Right Arrow KeyF6 246 %v M/R Enter SetupF8 248 %x M [Print][Select] Keys - Extended Resolution GrossFA 250 %z M Zero Key4.28.6 Display Capture UtilityThe Display Capture Utility sends the current display information out of the one of theavailable comm ports when the one of the two extended ASCII character representedby decimal 149 (hex: 95h) or decimal 150 (hex: 96h) are received through the commport. The previous characters can be used when the comm port is set to 8 data bits.For 7 data bits comm port, %[Ctrl-U] or %[Ctrl-V] can be used to replace 149 or 150respectively. Upon receiving decimal 149, the Display Capture Utility sends the currentdisplay information out of comm port 1. Upon receiving decimal 150, the DisplayCapture Utility sends the current display information out of comm port 2. Entering adecimal 149 from a computer keyboard can be accomplished by turning on the NumLock and holding down the ALT key while typing the desired decimal number on thekeyboard keypad (for example, 149).The Display Capture Utility must have NTEP (P440) disabled in order to function.Example #1The scale is in the weigh mode with the gross weight displayed (for example, 15.00).Input: The extended ASCII character represented by decimal 149 (hex: 95h) isreceived through any comm port.Output: "15.00 lb Gross " is sent out comm port 1.Example #2The scale is in setup at P110 Full Scale.Input: The extended ASCII character represented by decimal 150 (hex: 96h) isreceived through any comm port.Output: "P110 F.S. 100.00 " is sent out comm port 2.116Model 350 I.S. and Model 355 I.S. Service Manual