Aussie Blasters Service Fundamentals (pdf - 4.30MB) - Aussie Pumps

SERVICE INFORMATIONREPLACING V-PACKINGS• Remove manifold from crankcase• Insert proper extractor collet through main sealretainer. Tighten collet and extract retainers,v-packings and head rings.• Place correct insertion tool in cylinderand install front head ring, v-packingand long life ring and press firmly intocylinder until they will go no further.• Insert intermediate seal retainer pressing itfirmly into cylinder until it will go no furtherusing proper insertion tool.• Install rear head ring v-packing and mainseal retainer into cylinder in order shown andpress firmly into cylinder• Repeat this sequence for each cylinder• Coat each plunger with grease and carefullyremount manifold. Torque head tospecifications.12 Aussie Pumps Aussie Bertolini Pumps Bertolini Pumps Service Pumps Service Guidelines Guidelines – July 2011 - July 2008