HiRel Space Guide (Rev. A)

Featured ProductsInterfaceSerDes Interface TransceiverTLK2711-SPThe TLK2711-SP is a member of the WizardLink transceiver family of multi-gigabittransceivers, intended for use in ultra-high-speed, bidirectional, point-to-point datatransmission systems. The TLK2711-SP supports an effective serial interface speed of1.6 Gbps to 2.5 Gbps, providing up to 2 Gbps of data bandwidth. The primary applicationof this transceiver is to provide very high-speed I/O data channels for point-to-pointbaseband data transmission over controlled impedance media of approximately 50Ω.LOOPENPRBSENTXD0−TXD15TKLSBTKMSBTXCLKRKLSB18 BitRegisterTESTENENABLEPRBSEN998b/10bEncoder8b/10bEncoder2:1MUX1010MUXControls:PLL, Bias, RX,TXPRBSGenerator10102:1MUX10ClockSynthesizerInterpolator andClock RecoveryPRBSENParallel toSerial2:1MUXBIASClockTXPTXNPREKey Features• Radiation performanceTID = 25 kRAD (Si)SEL immune to 67.9 MeV-cm 2 /mg• Hot-plug protection• High-performance 68-pin ceramicquad flat pack package (HFG)• Interfaces to PCBs, copper cables orfiber-optic cable• On-chip PLL provides clock synthesisfrom low-speed reference• Receiver differential input thresholds200-mV minimum• Low power: < 500 mW• Ideal for high-speed backplane interconnectand point-to-point data link• QML-V qualified, SMD• 5962-0522101VXCApplications• Flight critical control systems• Launch vehicles• Satellite communications• Space-based imaging andsurveillanceRKMSBRXCLKRXD0−RXD1518 BitRegister99CommaDetectand 8b/10bDecodingCommaDetectand 8b/10bDecodingPRBSEN10101:2MUXPRBSVerification10Serial toParallelRecoveredClock2:1MUXDataRXPRXNSignal Detect(LOS)TLK2711-SP functional block diagramGet more information: www.ti.com/product/TLK2711-SP12 | Space Products Guide 2013 Texas Instruments