Delta Medical Adapter Power Supply - ServoTech A/S

CliQ60W 24V 1 Phase PlasticFeaturesMechanical drawingsDRP024V060W1AZ• z Ease of wire connection toterminals• z Compact design for easyhandling• z Overload protection• z Over voltage protection• z Thermal protection-+24V 2.5AAdjustDC OKNL100-240V~1.5A50-60Hz• z Power boost 150% for 3seconds• z Expected lifetime: 10 years• z Redundancy: Yes (with externalORing diode)• z RoHS compliantTechnical dataOUTPUT SPECIFICATIONSDRP024V060W1AZINPUT SPECIFICATIONSDRP024V060W1AZMECHANICALDRP024V060W1AZSAFETYDRP024V060W1AZOutput voltageOutput voltage range24V22 - 28VOutput current 2.5AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominal load(typ.)60W< 50mV / < 240mVpp (@ nominal values)> 20ms @ 115Vac, > 125ms @ 230VacInput voltage rangeInput frequencyNominal currentInrush currentlimitation l²t (+25°C)Power factorEfficiency85 - 264Vac (DC input range 120 - 375Vdc)47 - 63Hz1.1A @ 115Vac, 0.7A @ 230Vac< 40A @ 115Vac, < 80A @ 230VacConform to EN61000-3-2 STD> 85% typ.Case coverDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingPlastic (PC)120.6mm x 32mm x 113mm0.325kg> 800,000 hrsSound pressure level (SPL) < 40dBAConvectionInput terminal M4 x 3EMC / EmissionsImmunitySafety standardVoltage dipsClass B / EN55022, CISPR22, Class B; FCC Tilte 47; EN61204-3 (Class Bon AC & Class A on DC side), EN55022:2006 Class B, EN61000-3-2:2006,EN61000-3-3:1995/A1:2001/A2:2005EN55024:1998/A1:2001/A2:2003UL508, CSA C22.2 No.107.1-01, UL60950-1, CSA C22.2 No.60950-1,IEC60950-1, EN60950-1, EN50178, IEC62103 and IEC60204-1Conform to EN61000-4-11Line regulationLoad regulation< 0.5% typ. (@ 85 - 264Vac input, 100% load)< 1% typ. (with rated input, 0 - 100% load)Leakage current< 1mAOutput terminal M4 x 2Mounting railStandard TS35 mounting railGalvanic isolationInput to output: 4KVacInput to ground: 1.5KVacOutput to ground: 1.5KVacShock proofIEC600068-2-27Operating ambient temperature -20°C ~ +75°C *VibrationIEC600068-2-6Storage temperature-25°C ~ +85°CProtectionstructureIPX0Operating humidity < 95%Note (*)Operating amb. < 0°C until -20°C derate power by 1% / °C;Operating amb. > 50°C derate power by 2.5% / °C;Operating amb. > 70°C derate power by 4% / °C9 10

CliQ60W 24V 1 & 3 PhaseFeaturesMechanical drawingsDRP024V060W1AA• z Ease of wire connection toterminals-+• z Compact design for easyhandling• z Overload protection24V 2.5AAdjustDC OKNL100-240V~ 1.5A~~~• z Over voltage protection• z Thermal protection• z Power boost 150% for 3secondsDRP024V060W3AA• z Expected lifetime: 10 years24V 2.5A• z Redundancy: Yes (with externalORing diode)AdjustDC OK• z RoHS compliantL1L2L33 Phase 400-500V~ 0.3A 50-60HzTechnical dataOUTPUT SPECIFICATIONS DRP024V060W1AA DRP024V060W3AAINPUT SPECIFICATIONS DRP024V060W1AA DRP024V060W3AAMECHANICAL DRP024V060W1AA DRP024V060W3AASAFETY DRP024V060W1AA DRP024V060W3AAOutput voltageOutput voltage range24V22 - 28VOutput current 2.5AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation60W< 50mV / < 240mVpp (@ nominal values)> 20ms @ 115Vac,> 125ms @ 230Vac< 0.5% typ. (@ 85 -264Vac input, 100% load)> 30ms @ 3 x 400Vac,> 60ms @ 3 x 500Vac< 0.5% typ. (@ 320 -575Vac input, 100% load)< 1% typ. (with rated input, 0 - 100% load)Input voltage rangeInput frequencyNominal currentInrush currentlimitation l²t (+25°C)Power factorEfficiency85 - 264Vac (DC inputrange 120 - 375Vdc)1.1A @ 115Vac,0.7A @ 230Vac< 40A @ 115Vac,< 80A @ 230Vac> 85% typ.47 - 63Hz320 - 575Vac (DC inputrange 450 - 800Vdc)0.3A @ 400Vac approx.< 30A @ 400Vac & 500VacConform to EN61000-3-2 STDLeakage current < 1mA < 3.5mA> 86% @ 3 x 400Vac,> 85% @ 3 x 500VacCase coverDimensions(L x W x H)121mm x 32mm x120mmAluminium (Al5052)Unit weight / box 0.370kg 0.560kg121mm x 70mm x118.5mmMTBF > 800,000 hrs > 500,000 hrs.NoiseCoolingSound pressure level (SPL) < 40dBAConvectionInput terminal M4 x 3 M4 x 4; 600V ratingOutput terminal M4 x 2Mounting railShock proofM4 x 2 (2 pcs.);600V ratingStandard TS35 mounting railIEC600068-2-27EMC / EmissionsImmunitySafety standardVoltage dipsGalvanic isolationClass B / EN55022, CISPR22, CISPR11 Class B; FCC Tilte 47; EN61204-3(Class B on AC & Class A on DC side), EN55022:2006 Class B, EN61000-3-2:2006, EN61000-3-3:1995/A1:2001/A2:2005EN55024:1998/A1:2001/A2:2003UL508, CSA C22.2 No.107.1-01, UL60950-1, CSA C22.2 No.60950-1,IEC60950-1, EN60950-1, EN50178, IEC62103, IEC60204-1, cCSAus toCSA C22.2 No.213-M1987, ANSI/ISA 12.12.01:2007 Class I Division 2Hazardous Location / ATEXConform to EN61000-4-11Input to output: 4KVacInput to ground: 1.5KVacOutput to ground: 1.5KVacOperating ambient temperature -20°C ~ +75°C *VibrationIEC600068-2-6Storage temperature-25°C ~ +85°CProtectionstructureIPX0Operating humidity < 95%Note (*)Operating amb. < 0°C until -20°Cderate power by 1% / °C;Operating amb. > 50°C deratepower by 2.5% / °C;Operating amb. > 50°C deratepower by 2.5% / °C;11 12

DC OKAdjustDC OK3 Phase 400-500V~ 1.4A 50-60Hz 24V 20ACliQ480W 24V 1 & 3 PhaseFeatures• z Ease of wire connection toterminals• z Compact design for easyhandling• z Overload protection• z Over voltage protection• z Thermal protection• z Power boost 150% for 3seconds• z Expected lifetime: 10 years• z Redundancy: Yes (with externalORing diode)• z RoHS compliantMechanical drawingsDRP024V480W1AADRP024V480W3AAN L AdjustL1 L2 L3Technical dataOUTPUT SPECIFICATIONS DRP024V480W1AA DRP024V480W3AAINPUT SPECIFICATIONS DRP024V480W1AA DRP024V480W3AAMECHANICAL DRP024V480W1AA DRP024V480W3AASAFETY DRP024V480W1AA DRP024V480W3AAOutput voltageOutput voltage range24V22 - 28VOutput current 20.0AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation480W< 50mV / < 240mVpp (@ nominal values)> 20ms @ 115Vac &230Vac< 0.5% typ. (@ 85 -264Vac input, 100% load)> 25ms @ 3 x 400Vac,> 50ms @ 3 x 500Vac< 0.5% typ. (@ 320 -575Vac input, 100% load)< 1% typ. (with rated input, 0 - 100% load)Input voltage rangeInput frequencyNominal currentInrush currentlimitation l²t (+25°C)Power factorEfficiency85 - 264Vac (DC inputrange 120 - 375Vdc)5.7A @ 115Vac,2.8A @ 230VacNo damage & I²t rating atall I/P devices shall notexceed their rating> 86% typ.47 - 63Hz320 - 575Vac (DC inputrange 450 - 800Vdc)1.6A @ 400Vac approx.< 50A @ 400Vac & 500VacConform to EN61000-3-2 STDLeakage current < 1.25mA < 3.5mA> 87% @ 3 x 400Vac,> 86% @ 3 x 500VacCase coverDimensions(L x W x H)Aluminium (Al5052)121mm x 160mm x 118.5mmUnit weight / box 1.800kg 1.710kgMTBFNoiseCooling> 300,000 hrsSound pressure level (SPL) < 40dBAConvectionInput terminal M4 x 3 M4 x 4; 600V ratingOutput terminalMounting railShock proofVibrationProtectionstructureM4 x 2 (2 pcs.)M4 x 2 (2 pcs.);600V ratingStandard TS35 mounting railIEC600068-2-27IEC600068-2-6IPX0EMC / EmissionsImmunitySafety standardVoltage dipsGalvanic isolationClass B / EN55022, CISPR22, CISPR11 Class B; FCC Tilte 47; EN61204-3(Class B on AC & Class A on DC side), EN55022:2006 Class B, EN61000-3-2:2006, EN61000-3-3:1995/A1:2001/A2:2005EN55024:1998/A1:2001/A2:2003UL508, CSA C22.2 No.107.1-01, UL60950-1, CSA C22.2 No.60950-1,IEC60950-1, EN60950-1, EN50178, IEC62103, IEC60204-1, cCSAus toCSA C22.2 No.213-M1987, ANSI/ISA 12.12.01:2007 Class I Division 2Hazardous Location / ATEXConform to EN61000-4-11Input to output: 4KVacInput to ground: 1.5KVacOutput to ground: 1.5KVacOperating ambient temperature -20°C ~ +75°C *Storage temperature-25°C ~ +85°COperating humidity < 95%Note (*)Operating amb. > 50°C deratepower by 2.5% / °COperating amb. > 50°C deratepower by 2.5% / °C17 18

CliQ II60W 24V 1 PhaseFeaturesMechanical drawingsDRP024V060W1BA• z Ease of wire connection toterminals• z Pluggable connectors forfast wiring and easy installations• z Compact design for easyhandling• z Overload, over voltage andthermal protection• z Power boost 150% for 5 sec.• z Expected lifetime: 10 years• z Redundancy: Yes (with DRR-20A & DRR-40A)• z Efficiency > 89% typ.• z 3 year warranty• z RoHS compliant• z Meet Energy Star Level V• z Compliant with IP20Technical dataOUTPUT SPECIFICATIONSDRP024V060W1BAINPUT SPECIFICATIONSDRP024V060W1BAMECHANICALDRP024V060W1BASAFETYDRP024V060W1BAOutput voltageOutput voltage range24V24 - 28VOutput current 2.5AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation60W< 50mVpp / 150mVpp @ 85Vac to 264Vac input @ 25°C> 20ms @ 115Vac;> 125ms @ 230Vac & full load 60W (25°C)< 0.5% typ. (@ 85 - 264Vac input, 100% load)< 1% typ. (with rated input, 0 - 100% load)Input voltage rangeInput frequencyNominal currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current85 - 264Vac (DC input range 120 - 375Vdc)47 - 63Hz1.4A @ 115VAC, 0.8A @ 230VAC< 20A @ 115VAC, < 35A @ 230VACConform to EN61000-3-2 STD. Class A limits89% min. @ 115Vac & 230Vac< 1mA @ 240VacCase coverDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingAluminium (Al5052)121mm x 32mm x 125mm0.37kg> 1,000,000 hrsSound pressure level (SPL) < 40dBAConvectionInput terminal Pluggable connector 3 Pin (300V, 15A)Output terminal Pluggable connector 2 Pin (300V, 15A)Mounting railShock proofVibrationProtectionstructureStandard TS35 mounting railIEC600068-2-27IEC600068-2-6IP20EMC / EmissionsImmunity EN55024, EN61000-6-1, -2Safety standardVoltage dipsGalvanic isolationClass B / EN55022, CISPR22, CISPR11 Class B; FCC Title 47; EN61204-3(Class B on AC & Class A on DC side), EN55022: 2006 Class B, EN61000-3-2: 2006, EN61000-3-3: 2008UL/cUL Listed to UL508 and CSA C22.2 no. 107.1-01, UR/cUR recognizeto UL60950-1 and CSA C22.2 No. 60950-1, TUV Bauart to EN60950-1,EN50178: 1997 and IEC62103: 2003, CB test certificate and report toIEC60950-1, CE (EMC and Low Voltage directive) and CSA to CSA C22.2No. 107.1-01.[CCC & Class I Div 2 Hazardous Locations (prepared)]Conform to EN61000-4-11Input to output: 4KVacInput to ground: 1.5KVacOutput to ground: 1.5KVacOperating ambient temperature - 20°C ~ +80°C *Storage temperature-25°C ~ +85°COperating humidity< 95 % RH non-condensingNote (*) Operating amb. > 50°C derate power by 2.5% / °C19 20

CliQ II120W 24V 1 PhaseFeaturesMechanical drawingsDRP024V120W1BA• z Ease of wire connection toterminals• z Compact design for easyhandling• z Overload, over voltage andthermal protection• z Power boost 150% for 5 sec.• z Expected lifetime: 10 years• z Redundancy: Yes (with externalORing diode)• z Efficiency > 88% typ.• z 3 year warranty• z RoHS compliantTechnical dataOUTPUT SPECIFICATIONSDRP024V120W1BAINPUT SPECIFICATIONSDRP024V120W1BAMECHANICALDRP024V120W1BASAFETYDRP024V120W1BAOutput voltageOutput voltage rangeOutput currentOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)24V24 - 28V5A120W< 50mVpp /150mVpp @ 85Vac to 264Vac input @25°C> 20ms @ 115Vac;> 115ms @ 230Vac & full load 120W (25°C)Input voltage rangeInput frequencyNominal currentInrush currentlimitation l²t (+25°C)Power factorEfficiency85 - 264Vac (DC input range 120 - 375Vdc)47 - 63Hz2.2A max. @ 115Vac, 1.1A max. @ 230Vac< 35A @115Vac and 230VacConform to EN61000-3-2 STD. Class A limits89% min. @ 115Vac & 230VacCase coverDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingAluminium (Al5052)121mm x 50mm x 123.1mm0.72kg> 800,000 hrsSound pressure level (SPL) < 40dBAConvectionInput terminal Pluggable connector 3 Pin (300V, 15A)EMC / EmissionsImmunity EN55024, EN61000-6-1, -2Safety standardClass B / EN55022, CISPR22, CISPR11 Class B; FCC Title 47; EN61204-3(Class B on AC & Class A on DC side), EN55022: 2006 Class B, EN61000-3-2: 2006, EN61000-3-3: 2008UL/cUL Listed to UL508 and CSA C22.2 no. 107.1-01, UR/cUR recognizeto UL60950-1 and CSA C22.2 No. 60950-1, TUV Bauart to EN60950-1,EN50178: 1997 and IEC62103: 2003, CB test certificate and report toIEC60950-1, CE (EMC and Low Voltage directive) and CSA to CSA C22.2No. 107.1-01.[CCC & Class I Div 2 Hazardous Locations (prepared)]Line regulation< 0.5% typ. (@ 85 - 264Vac input, 100% load)Leakage current< 1mA @ 240VacOutput terminal Pluggable connector 4 Pin (300V, 15A)Load regulation< 1% typ. (with rated input, 0 - 100% load)Mounting railShock proofVibrationProtectionstructureStandard TS35 mounting railIEC600068-2-27IEC600068-2-6IP20Voltage dipsGalvanic isolationConform to EN61000-4-11Input to output: 4KVacInput to ground: 1.5KVacOutput to ground: 1.5KVacOperating ambient temperature -20°C ~ +80°C *Storage temperature-25°C ~ +85°COperating humidity< 95 % RH non-condensingNote (*) Operating amb. > 50°C derate power by 2.5% / °C21 22

in1in2in1in2CliQ II20A & 40A Redundancy ModulesFeaturesMechanical drawingsDRR-20A• z Full corrosion resistancealuminium chassis even withdeep scratches caused byrugged handling22V - 60V 20AV in1 V in2 ComVVOKOK• z Wide Input RangeOK• z Built-in DC OK signal & relay• z Compliant with IP20V outV OK20A MAXRedundancy Module• z 3 year warrantyDRR-40A• z RoHS compliant22V - 60V 40AV in1V in2ComVOKVout+ + +OK40A MAXRedundancy ModuleTechnical dataOUTPUT SPECIFICATIONS DRR-20A DRR-40AINPUT SPECIFICATIONS DRR-20A DRR-40AMECHANICAL DRR-20A DRR-40ASAFETY DRR-20A DRR-40AOutput currentNormal mode =0 - 20Amps;Short circuit or Overload =25Amps max.Voltage drop (Vin - Vout) Typical 0.65VNormal mode =0 - 40Amps;Short circuit or Overload =50Amps max.Input voltage rangeInput current(1+1 Redundancy) =Nom. 2 x 12.5Amps(N+1 Redundancy) =Nom. 2 x 10Amps(Single use) =Nom. 20Amps22 - 60Vdc(1+1 Redundancy) =Nom. 2 x 25Amps(N+1 Redundancy) =Nom. 2 x 20Amps(Single use) =Nom. 40AmpsCase coverDimensions(L x W x H)Aluminium (AL1100F)50mm x 121mm x 120mmUnit weight / box 0.375kg 0.515kgMTBFSignalsProtectionstructure> 800,000 hrsGreen LED DC OKIP20Safety standardUR/cUR recognize to UL60950-1, UL508, SIQ to EN60950-1, EN50178:1998, IEC60204-1: 1998 and IEC62103: 2003, CB test certificate and reportto IEC60950-1, CE (EMC and Low Voltage directive) and RoHS directive,WEEE directive [CCC & Class I Div 2 Hazardous Locations (prepared)]Operating ambient temperature -20°C ~ +80°C *Storage temperature-25°C ~ +85°COperating humidity< 95% RH non-condensingIsolation against housingTerminal - ChassisMin. 500Vdc, >100MOhms @ 25°C & 70% RHNote (*) Operating amb. > 50°C derate power by 2.5% / °C23 24

CliQProduct specification1 Phase 12V CliQ DIN Rail Power SupplyOUTPUT (DC) DRP012V015W1AZ DRP012V030W1AZ DRP012V060W1AA DRP012V100W1AA DRP024V060W1AZ DRP024V060W1AA DRP024V120W1AA DRP024V240W1AA DRP024V480W1AAOutput voltage 12V 24VOutput voltage range 11 - 14V 22 - 28VOutput current 1.25A 2.5A 5.0A 8.33A 2.5A 5.0A 10.0A 20.0AOutput power 15W 30W 60W 100W 60W 120W 240W 480WResidual ripple / peakswitching (20MHz)Mains buffering @ nominalload (typ.)> 22ms @ 115Vac; > 110ms @ 230Vac< 100mV < 50mV / < 240mVpp (@ nominal values)> 22ms @ 115Vac;> 105ms @ 230Vac> 20ms @ 115Vac, > 125ms @ 230VacLine regulation < 0.5% typ. (@ 85 - 264Vac input, 100% load)Load regulation < 1% typ. (with rated input, 0 - 100% load)INPUT (AC)Input voltage range 85 - 264Vac (DC input range 120 - 375Vdc)Input frequency47 - 63HzNominal currentInrush current limitation I²t(+25°C) typ.0.37A @ 115Vac,0.22A @ 230Vac< 30A @ 115Vac,< 65A @ 230Vac0.70A @ 115Vac,0.42A @ 230Vac< 40A @ 115Vac,< 80A @ 230Vac1.35A @ 115Vac,0.8A @ 230Vac< 50A @ 115Vac,< 100A @ 230Vac2.5A @ 115Vac,1.5A @ 230Vac< 100A @ 115Vac,No damage @ 230VacPower factor Conform to EN61000-3-2 STDEfficiency83.5% min. @ 115Va,83.0% min. @ 230Vac84.5% min. @ 115Vac & 230Vac 85.5% min. @ 115Vac & 230Vac86% min. @ 115Vac;87% min. @ 230Vac1.1A @ 115Vac, 0.7A @ 230Vac> 35ms @ 115Vac,> 70ms @ 230Vac1.4A @ 115Vac,0.8A @ 230Vac2.9A @ 115Vac,1.5A @ 230Vac> 20ms @ 115Vac & 230Vac5.7A @ 115Vac,2.8A @ 230Vac< 40A @ 115Vac, < 80A @ 230Vac < 80A @ 115Vac No damage & I²t rating at all I/P devices shall not exceed their rating> 85% typ. > 84% typ. > 86% typ.Leakage current < 1mA < 3.5mA < 1.25mAMECHANICALCase cover Plastic (PC) Aluminium (Al5052) Plastic (PC) Aluminium (Al5052)Dimensions (L x W x H) 100mm x 32mm x 100mm 121mm x 32mm x 120mm 121mm x 50mm x 118.2mm 120.6mm x 32mm x 113mm 121mm x 32mm x 120mm 121mm x 50mm x 118.2mm 121mm x 85mm x 118.5mm 121mm x 160mm x 118.5mmUnit weight / box 0.175kg 0.197kg 0.325kg 0.636kg 0.325kg 0.370kg 0.540kg 1.040kg 1.800kgMTBF > 300,000 hrs > 800,000 hrs > 300,000 hrsNoise Sound pressure level (SPL) < 40dBACoolingConvectionInput terminal M3.5 x 3 M4 x 3 M4 x 3Output terminal M3.5 x 2 M4 x 2 M4 x 2 (2 pcs) M4 x 2 M4 x 2 (2 pcs.)Mounting rail Standard TS35 mounting railShock proof IEC60068-2-27Vibration IEC60068-2-6Protection structure IPX0SAFETYEMC / Emissions FCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class B Class B / EN55022, CISPR22, Class B; FCC Tilte 47; EN61204-3 (Class B on AC & Class A on DC side), EN55022:2006 Class B, EN61000-3-2:2006, EN61000-3-3:1995/A1:2001/A2:2005Immunity EN55024, EN61000-6-1, -2 EN55024:1998/A1:2001/A2:2003Safety standardUL/cUL listed to UL508 and CSA C22.2 No. 107.1-01, UR/cUR recognize to UL60950-1 and CSA C22.2 No. 60950-1, TUV-Bauart Mark to EN60950-1, EN50178:1998, IEC62103: 2003, CB test certificate and report to IEC60950-1, CSA C22.2 No. 107.1-01, CE (EMC and Low Voltage directive) and CCC & Class I Div 2Hazardous Locations (prepared)1 Phase 24V CliQ DIN Rail Power SupplyUL508, CSA C22.2 No.107.1-01,UL60950-1, CSA C22.2 No.60950-1,IEC60950-1, EN60950-1, EN50178,IEC62103 and IEC60204-1UL508, CSA C22.2 No.107.1-01, UL60950-1, CSA C22.2 No.60950-1, IEC60950-1, EN60950-1, EN50178, IEC62103, IEC60204-1, cCSAus to CSAC22.2 No.213-M1987, ANSI/ISA 12.12.01:2007 Class I Division 2 Hazardous Location / ATEXVoltage dipsConform to EN61000-4-11Input to output: 4KVacGalvanic isolationInput to ground: 1.5KVacOutput to ground: 1.5KVacOperating ambient temperature -20°C ~ +75°C *Storage temperature -25°C ~ +85°C -25°C ~ +85°COperating humidityNote (*) Operating amb. > 50°C derate power by 2.5% / °C; Operating amb. > 70°C derate power by 4% / °C< 95% RHOperating amb. < 0°C until -20°C deratepower by 1% / °C; Operating amb.> 50°C derate power by 2.5% / °C;Operating amb. > 70°C derate powerby 4% / °COperating amb. < 0°C until -20°C deratepower by 1% / °C; Operating amb.> 50°C derate power by 2.5% / °C;Operating amb. > 50°C derate powerby 2.5% / °COperating amb. > 50°C derate powerby 2.5% / °C; Operating amb. > 70°Cderate power by 4% / °CReference no. EOE11010156 EOE11010158 EOE11010159 EOE11010160 D0116888 EOE11010006 EOE12010002 EOE12010005 EOE13010007Operating amb. > 50°C deratepower by 2.5% / °C25 26

CliQProduct specificationCliQ IIProduct specification3 Phase CliQ DIN Rail Power SupplyOUTPUT (DC) DRP024V060W3AA DRP024V120W3AA DRP024V240W3AA DRP024V480W3AAOutput voltageOutput voltage range24V22 - 28VOutput current 2.5A 5.0A 10.0A 20.0AOutput power 60W 120W 240W 480WResidual ripple / peakswitching (20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulationINPUT (AC)Input voltage rangeInput frequency> 30ms @ 3 x 400Vac,> 60ms @ 3 x 500Vac> 35ms @ 3 x 400Vac,> 70ms @ 3 x 500Vac< 50mV / < 240mVpp (@ nominal values)> 35ms @ 3 x 400Vac,> 60ms @ 3 x 500Vac< 0.5% typ. (@ 320 - 575Vac input, 100% load)< 1% typ. (with rated input, 0 - 100% load)320 - 575Vac (DC input range 450 - 800Vdc)47 - 63Hz> 25ms @ 3 x 400Vac,> 50ms @ 3 x 500VacNominal current 0.3A @ 400Vac approx. 0.5A @ 400Vac approx. 0.8A @ 400Vac approx. 1.6A @ 400Vac approx.Inrush current limitation I²t(+25°C) typ.Power factorEfficiencyLeakage current< 30A @ 400Vac & 500Vac < 40A @ 400Vac & 500Vac < 50A @ 400Vac & 500Vac> 86% @ 3 x 400Vac,> 85% @ 3 x 500VacConform to EN61000-3-2 STD< 3.5mA> 87% @ 3 x 400Vac,> 86% @ 3 x 500VacMECHANICALCase coverAluminium (Al5052)Dimensions (L x W x H) 121mm x 70mm x 118.5mm 121mm x 85mm x 120.5mm 121mm x 160mm x 118.5mmUnit weight / box 0.560kg 0.720kg 0.990kg 1.710kgMTBF > 500,000 hrs. > 300,000 hrsNoiseSound pressure level (SPL) < 40dBACoolingConvectionInput terminalM4 x 4; 600V ratingOutput terminalM4 x 2 (2 pcs.); 600V ratingMounting railStandard TS35 mounting railShock proofIEC600068-2-27VibrationIEC600068-2-6Protection structureIPX0SAFETYEMC / EmissionsClass B / EN55022, CISPR22, CISPR11 Class B; FCC Tilte 47; EN61204-3 (Class B on AC & Class A on DC side), EN55022:2006 Class B, EN61000-3-2:2006, EN61000-3-3:1995/A1:2001/A2:2005ImmunityEN55024:1998/A1:2001/A2:2003UL508, CSA C22.2 No.107.1-01, UL60950-1, CSA C22.2 No.60950-1, IEC60950-1, EN60950-1, EN50178, IEC62103, IEC60204-1, cCSAus to CSAC22.2 No.213-M1987, ANSI/ISA 12.12.01: 2007 Class I Division 2 Hazardous Location / ATEXSafety standardVoltage dipsConform to EN61000-4-11Input to output: 4KVacGalvanic isolationInput to ground: 1.5KVacOutput to ground: 1.5KVacOperating ambient temperature -20°C ~ +75°C *Storage temperature-25°C ~ +85°COperating humidity < 95%Note (*) Operating amb. > 50°C derate power by 2.5% / °COperating amb. > 50°C deratepower by 2.5% / °C; Operating amb.> 70°C derate power by 4% / °COperating amb. > 50°C deratepower by 2.5% / °CReference no. EOE11010007 EOE12010006 EOE12010007 EOE13010010CliQ II DIN Rail Power SupplyOUTPUT (DC) DRP024V060W1BA DRP024V120W1BAOutput voltageOutput voltage range24V24 - 28VOutput current 2.5A 5.0AOutput power 60W 120WResidual ripple / peakswitching (20MHz)< 50mVpp @ 85Vac to 264Vac input @ 25°CMains buffering @ nominalload (typ.)Line regulationLoad regulationINPUT (AC)Input voltage rangeInput frequencyNominal currentInrush current limitation I²t(+25°C) typ.Power factor> 20ms @ 115Vac, > 125ms @230Vac & full load 60W (25°C)1.5A max. @ 115Vac,1.0A max. @ 230VacNA> 20ms @ 115Vac, > 115ms @230Vac & full load 60W (25°C)< 0.5% typ. (@ 85 - 264Vac input, 100% load)< 1% typ. (with rated input, 0 - 100% load)85 - 264Vac (DC input range 120 - 375Vdc)47 - 63Hz2.2A max. @ 115Vac,1.2A max. @ 230Vac< 35A @ 230VacConform to EN61000-3-2 STD,Class A limitsEfficiency > 89% min. @ 115Vac & 230Vac > 88% min. @ 115Vac & 230VacLeakage current < 1mA @ 240Vac < 1mA @ 240VacMECHANICALCase coverAluminium (Al5052)Dimensions (L x W x H) 121mm x 32mm x 125mm 121mm x 50mm x 123.1mmUnit weight / box 0.370kg 0.720kgMTBF > 1,000,000 hrs. > 800,000 hrs.NoiseSound pressure level (SPL) < 40dBACoolingConvectionInput terminal Pluggable connector 3 Pin (300V, 15A)Output terminalPluggable connector 2 Pin(300V, 15A)Pluggable connector 4 Pin(300V, 15A)Mounting railStandard TS35 mounting railShock proofIEC600068-2-27VibrationIEC600068-2-6Protection structureIP20SAFETYClass B / EN55022, CISPR22, CISPR11 Class B; FCC Title 47; EN61204-3EMC / Emissions(Class B on AC & Class A on DC side), EN55022: 2006 Class B, EN61000-3-2: 2006, EN61000-3-3: 2008Immunity EN55024, EN61000-6-1, -2UL/cUL Listed to UL508 and CSA C22.2 no. 107.1-01, UR/cUR recognizeto UL60950-1 and CSA C22.2 No. 60950-1, TUV Bauart to EN60950-1,EN50178: 1997 and IEC62103: 2003, CB test certificate and report toIEC60950-1, CE (EMC and Low Voltage directive) and CSA to CSA C22.2Safety standardNo. 107.1-01.[CCC & Class I Div 2 Hazardous Locations (prepared)]Voltage dipsConform to EN61000-4-11Input to output: 4KVacGalvanic isolationInput to ground: 1.5KVacOutput to ground: 1.5KVacOperating ambient temperature -20°C ~ +80°C *Storage temperatureOperating humidity-25°C ~ +85°C< 95% RH non-condensingNote (*) Operating amb. > 50°C derate power by 2.5% / °CReference no. EOE11010248 EOE12010249CliQ II Redundancy ModulesOUTPUT (DC) DRR-20A DRR-40AOutput currentNormal mode =0 - 20Amps; Shortcircuit or Overload =25Amps max.Voltage drop (Vin - Vout) Typical 0.65VINPUT (AC)Input voltage rangeInput current(1+1 Redundancy) =Nom. 2 x 12.5Amps(N+1 Redundancy)= Nom. 2 x 10Amps(Single use) =Nom. 20AmpsNormal mode =0 - 40Amps; Shortcircuit or Overload =50Amps max.22 - 60Vdc(1+1 Redundancy) =Nom. 2 x 25Amps(N+1 Redundancy) =Nom. 2 x 20Amps(Single use) =Nom. 40AmpsMECHANICALCase coverAluminium (AL1100F)Dimensions (L x W x H)50mm x 121mm x 120mmUnit weight / box 0.375kg 0.515kgMTBF> 800,000 hrsSignalsGreen LED DC OKProtection structureIP20SAFETYSafety standardUR/cUR recognize to UL60950-1,UL508,SIQ to EN60950-1, EN50178:1998, IEC60204-1: 1998 and IEC62103:2003, CB test certificate and report toIEC60950-1, CE (EMC and Low Voltagedirective) and RoHS directive, WEEEdirective [CCC & Class I Div 2 HazardousLocations (prepared)]Operating ambient temp. -20°C ~ +80°C *Storage temperatureOperating humidityIsolation against housingNote (*)-25°C ~ +85°C< 95% RH non-condensingTerminal - Chassis min. 500Vdc,>100MOhms @ 25°C & 70% RHOperating amb. > 50°C derate power by2.5% / °CReference no. EOE21010284 EOE2101028527 28

Delta Panel Mount Power SupplyThe Panel Mount Power Supply is the latest offering fromone of the world’s largest leading power supply manufacturersand solution providers – Delta. The product rangeoffers nominal output voltages of 12V and 24V, a widetemperature range from -10°C to +70°C and a highlydependable minimum holdup time. The state-of-the-artdesign is made to withstand harsh industrial environments.What makes the product stands out from the crowd is itslightweight full aluminum body design which can withstandshock and vibration according to IEC60068-2.Delta’s panel mount power supply also offers overvoltageand overload protection. Using a wide input voltage rangedesign, it is compatible worldwide. The input also includesDC operating voltage from 120-375Vdc. Best of all, thisexcellent design and quality does not come with a big pricetag.29 30

Panel Mount35W 5V 1 PhaseFeatures• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Overload protection• z Over voltage protection• z Thermal protection• z MTBF: > 700,000 hrs.• z Efficiency: > 85% typ.• z Expected lifetime: 10 years• z 2 years warranty• z RoHS compliantMechanical drawingsPMC-05V035W1AAPMCLSCREW PROTRUSION LENGTH L? 6 MMTechnical dataOUTPUT SPECIFICATIONSPMC-05V035W1AAINPUT SPECIFICATIONSPMC-05V035W1AAMECHANICALPMC-05V035W1AASAFETYPMC-05V035W1AAOutput voltage5VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BOutput voltage range 4.75 - 5.5VOutput current 7.0AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation35W< 70mVpp @ 25°C;< 150mVpp @ nominal values> 80ms @ 230Vac,> 15ms @ 115Vac, 25°C< 0.5% typical (@ 85-264Vac input, 100% load)< 1% typical (@ 85-264Vac input, 0 to 100 % load)Input frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current47 - 63Hz1.0A max. (0.9A @ 115Vac, 0.5A @ 230Vac)< 30A @ 115Vac; < 60A @ 230VacNA78% @ 115Vac,79% @ 230Vac< 1mA @ 240VacDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingInput terminalOutput terminal98mm x 97mm x 38mm0.175kg> 700,000 hrsSound pressure level (SPL) < 40dBAConvectionInput / output wire AWG 18-14Terminal block 5 Pin rated 300V/20ATerminal block 5 Pin rated 300V/20AImmunitySafety standardVoltage dipsGalvanic isolationEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2, 1994UR/cUR recognize to UL60950-1 and CSA C22.2 No. 60950-1; CB testcertificate and report to IEC60950-1/ EN60950-1, CE, SIQ, CCC prepared(EMC and Low Voltage directive)Conform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacShock proofIEC600068-2-27Operating ambient temperature -10°C ~ +70°C *VibrationIEC600068-2-6Storage temperature-25°C ~ +85°CProtectionstructureIPX0Operating humidity< 95% RHNote (*)Operating to 70°C possible with a linear derating to half power from50°C to 70°C31 32

Panel Mount35W 12V & 24V 1 PhaseFeatures• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Overload protection• z Over voltage protection• z Thermal protection• z MTBF: > 700,000 hrs.• z Efficiency: > 85% typ.• z Expected lifetime: 10 years• z 2 years warranty• z RoHS compliantMechanical drawingsPMC-12V035W1AAPMCPMC-24V035W1AAPMCLLSCREW PROTRUSION LENGTH L? 6 MMSCREW PROTRUSION LENGTH L? 6 MINTechnical dataOUTPUT SPECIFICATIONS PMC-12V035W1AA PMC-24V035W1AAINPUT SPECIFICATIONS PMC-12V035W1AA PMC-24V035W1AAMECHANICAL PMC-12V035W1AA PMC-24V035W1AASAFETY PMC-12V035W1AA PMC-24V035W1AAOutput voltage 12V 24VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BOutput voltage range 11 - 14V 22 - 28VOutput current 3.0A 1.46AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation35W< 100mVpp @ 25°C;< 150mVpp @ -10°C> 15ms @ 115Vac, > 80ms @ 230Vac< 0.5% typ. (@ 85-264Vac input, 100% load)< 1% typ. (@ 85-264Vac input, 0 to 100 % load)Input frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current0.72A max. @ 115Vac,0.45A max. @ 230Vac> 84% @ 115Vac &230Vac47 - 63Hz0.72A max. @ 115Vac,0.40A max. @ 230Vac< 30A @ 115Vac; 60A @ 230VacNA> 85% (typical)< 1mA @ 240VacDimensions(L x W x H)98mm x 97mm x 38mmUnit weight / box 0.210kg 0.237kgMTBFNoiseCoolingInput terminalOutput terminal> 700,000 hrs128mm x 97mm x 38mmSound pressure level (SPL) < 40dBAConvectionTerminal block 5 Pin rated 300V/20ATerminal block 5 Pin rated 300V/20AInput / output wire AWG 22-14Shock proofVibrationProtectionstructureIEC600068-2-27IEC600068-2-6IPX0ImmunitySafety standardVoltage dipsGalvanic isolationEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2, 1994UR/cUR recognize to UL60950-1 UR/cUR recognized to UL60950-1and CSA C22.2 No. 60950-1; CB test and CSA C22.2 No.60950-1; CB testcertificate and report to IEC60950-1, certificate and report to IEC60950-TUV, CCC, CE (EMC and Low Voltagedirective)directive),1; CCC, CE (EMC and low voltageNEMKOConform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacOperating ambient temperature -10°C ~ +70°C *Storage temperatureOperating humidity-25°C ~ +85°C< 95% RHNote (*)Operating to 70°C possible with a linear derating to half power from50°C to 70°C33 34

Panel Mount50W 12V & 24V 1 PhaseFeatures• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Overload protection• z Over voltage protection• z Thermal protection• z MTBF: > 700,000 hrs.• z Efficiency: > 85% typ.• z Expected lifetime: 10 years• z 2 years warranty• z RoHS compliantMechanical drawingsPMC-12V050W1AA & PMC-24V050W1AAPMCLSCREW PROTRUSION LENGTH L? 6 MINTechnical dataOUTPUT SPECIFICATIONS PMC-12V050W1AA PMC-24V050W1AAINPUT SPECIFICATIONS PMC-12V050W1AA PMC-24V050W1AAMECHANICAL PMC-12V050W1AA PMC-24V050W1AASAFETY PMC-12V050W1AA PMC-24V050W1AAOutput voltage 12V 24VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BOutput voltage range 11 - 14V 22 - 28VOutput current 4.17A 2.10AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation> 15ms @ 115Vac,> 80ms @ 230Vac50W< 100mVpp @ 25°C;< 150mVpp @ -10°C> 15ms @ 115Vac,> 90ms @ 230Vac< 0.5% typ. (@ 85-264Vac input, 100% load)< 1% typ. (@ 85-264Vac input, 0 to 100 % load)Input frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current47 - 63Hz1.1A max. @ 115Vac, 0.7A max. @ 230Vac< 30A @ 115Vac;< 65A @ 230Vac> 83% @ 115Vac;> 84% @ 230VacNA< 30A @ 115Vac;< 60A @ 230Vac> 86% (typical)< 1mA @ 240VacDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingInput terminalOutput terminal128mm x 97mm x 38mm0.255kg> 700,000 hrsSound pressure level (SPL) < 40dBAConvectionTerminal block 5 Pin rated 300V/20ATerminal block 5 Pin rated 300V/20AInput / output wire AWG 22-14Shock proofVibrationProtectionstructureIEC600068-2-27IEC600068-2-6IPX0ImmunitySafety standardVoltage dipsGalvanic isolationEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2, 1994UR/cUR recognize to UL60950-1 UR/cUR recognized to UL60950-1and CSA C22.2 No. 60950-1; CB test and CSA C22.2 No.60950-1; CB testcertificate and report to IEC60950-1, certificate and report to IEC60950-TUV, CCC, CE (EMC and Low Voltagedirective)directive),1; CCC, CE (EMC and low voltageNEMKOConform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacOperating ambient temperature -10°C ~ +70°C *Storage temperatureOperating humidity-25°C ~ +85°C< 95% RHNote (*)Operating to 70°C possible with a linear derating to half power from50°C to 70°C35 36

Panel Mount75W 24V 1 PhaseFeatures• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Overload protection• z Over voltage protection• z Thermal protection• z MTBF: > 700,000 hrs.• z Efficiency: > 85% typ.• z Expected lifetime: 10 years• z 2 years warranty• z RoHS compliantMechanical drawingsPMC-24V075W1AAPMCLSCREW PROTRUSION LENGTH L? 6 MINTechnical dataOUTPUT SPECIFICATIONSPMC-24V075W1AAINPUT SPECIFICATIONSPMC-24V075W1AAMECHANICALPMC-24V075W1AASAFETYPMC-24V075W1AAOutput voltage24VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BOutput voltage range22 - 28VOutput current 3.13AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation75W< 100mVpp @ 25°C;< 150mVpp @ -10°C> 15ms @ 115Vac,> 90ms @ 230Vac< 0.5% typical (@ 85-264Vac input, 100% load)< 1% typical (@ 85-264Vac input, 0 to 100 % load)Input frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current47 - 63Hz1.8A max. (1.5A max. @ 115Vac, 1.0A max. @ 230Vac)< 40A @ 115Vac; < 80A @ 230VacConform to EN61000-3-2 STD.CLASS A LIMITS.> 86% (typ.)< 1mA @ 240VacDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingInput terminalOutput terminal128mm x 97mm x 38mm0.300kg> 700,000 hrsSound pressure level (SPL) < 40dBAConvectionInput / output wire AWG 22-14Terminal block 5 Pin rated 300V/20ATerminal block 5 Pin rated 300V/20AImmunitySafety standardVoltage dipsGalvanic isolationEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2, 1994UR/cUR recognize to UL60950-1 and CSA C22.2 No. 60950-1; CB testcertificate and report to IEC60950-1, TUV, CCC, CE (EMC and Low Voltagedirective)Conform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacShock proofIEC600068-2-27Operating ambient temperature -10°C ~ +70°C *VibrationIEC600068-2-6Storage temperature-25°C ~ +85°CProtectionstructureIPX0Operating humidity< 95% RHNote (*)Operating to 70°C possible with a linear derating to half power from50°C to 70°C37 38

Panel Mount100W 12V & 24V 1 PhaseFeaturesMechanical drawingsPMC-12V100W1AA & PMC-24V100W1AA• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Overload protection• z Over voltage protection• z Thermal protection• z MTBF: > 700,000 hrs.• z Efficiency: > 85% typ.• z Expected lifetime: 10 years• z 2 years warranty• z RoHS compliantPMCLTechnical dataOUTPUT SPECIFICATIONS PMC-12V100W1AA PMC-24V100W1AAINPUT SPECIFICATIONS PMC-12V100W1AA PMC-24V100W1AAMECHANICAL PMC-12V100W1AA PMC-24V100W1AASAFETY PMC-12V100W1AA PMC-24V100W1AAOutput voltage 12V 24VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BOutput voltage range 11 - 14V 22 - 28VOutput current 8.33A 4.17AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation> 15ms @ 115Vac,> 80ms @ 230Vac100W< 100mVpp @ 25°C;< 150mVpp @ -10°C> 15ms @ 115Vac,> 90ms @ 230Vac< 0.5% typ. (@ 85-264Vac input, 100% load)< 1% typ. (@ 85-264Vac input, 0 to 100 % load)Input frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current47 - 63Hz2.0A max. @ 115Vac, 1.1A max. @ 230Vac< 60A @ 115Vac;< 130A @ 230Vac< 50A @ 115Vac;< 100A @ 230VacConform to EN61000-3-2 STD.CLASS A LIMITS.> 84% @ 115Vac;> 86% (typical)> 86% @ 230Vac< 1mA @ 240VacDimensions(L x W x H)158mm x 97mm x 38mmUnit weight / box 0.45kg 0.41kgMTBFNoiseCoolingInput terminalOutput terminal> 700,000 hrsSound pressure level (SPL) < 40dBAConvectionTerminal block 7 Pin rated 300V/20ATerminal block 7 Pin rated 300V/20AInput / output wire AWG 22-14Shock proofVibrationProtectionstructureIEC600068-2-27IEC600068-2-6IPX0ImmunitySafety standardVoltage dipsGalvanic isolationEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2, 1994UR/cUR recognize to UL60950-1 UR/cUR recognized to UL60950-1and CSA C22.2 No. 60950-1; CB test and CSA C22.2 No.60950-1; CB testcertificate and report to IEC60950-1, certificate and report to IEC60950-TUV, CCC, CE (EMC and Low Voltagedirective)directive),1; CCC, CE (EMC and low voltageNEMKOConform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacOperating ambient temperature -10°C ~ +70°C *Storage temperatureOperating humidity-25°C ~ +85°C< 95% RHNote (*)Operating to 70°C possible with a linear derating to half power from50°C to 70°C39 40

Panel Mount100W 24V Dual OutputFeatures• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Ease of wire connection toterminals• z Overload & over voltageprotection• z MTBF: > 700,000 hrs.• z Efficiency: > 84% typ.• z Expected lifetime: 10 years• z 2 years warranty• z RoHS compliantMechanical drawingsPMC-DSPV100W1APMCLTechnical dataOUTPUT SPECIFICATIONSPMC-DSPV100W1AINPUT SPECIFICATIONSPMC-DSPV100W1AMECHANICALPMC-DSPV100W1ASAFETYPMC-DSPV100W1AOutput voltage24V / 5VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BOutput voltage range V1: 24Vdc +/-2% / V2: 5Vdc +/-2%Output currentOutput powerResidual ripple / peak switching(20MHz)Start-up timeMains buffering @ nominalload (typ.)Rise timeLine regulationV1: 24Vdc / 0.3 - 4.0A (2.7A rated) /V2: 5Vdc / 0.8 - 7.0A (7A rated)100W< 200mVp-p (24V) & < 80mVp-p (5V)< 1000ms @ 100% load (25°C)> 15ms @ 115Vac & > 80ms @ 230Vac< 30ms (24V) & < 20ms (5V)+/- 0.5% typ. (@ 85-264Vac input, rated load)Load regulation +/- 1% typ. (@ 85-264Vac input) *NoteNote (*)All parameter not specially mentioned are measured @230Vac input, rated load and 25°C of ambient temp.Measured from 20% to 100% rated load, @ anotheroutput set at 60% rated loadInput frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current47 - 63Hz3.2A max. (2A max. @ 115Vac, 1.1A max. @ 230Vac)< 50A @ 115Vac, < 100A @ 230Vac @ 25°CIEC-61000-3-2 Class A> 84% @ 115Vac & > 86% @ 230Vac (rated load)< 1mA @ 240VacDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingInput terminalOutput terminal178mm x 97mm x 38mm0.52kg> 700,000 hrsSound pressure level (SPL) < 40dBAConvectionInput / output wire AWG 22-14Shock proofVibrationProtectionstructureTerminal block 7 Pin rated 300V/20ATerminal block 7 Pin rated 300V/20AIEC600068-2-27IEC600068-2-6IPX0ImmunitySafety standardVoltage dipsGalvanic isolationEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2, 1994UR/cUR recognize to UL60950-1 and CSA C22.2 No. 60950-1CB testcertificate and report to IEC60950-1, TUV, CCC, CE (EMC and Low Voltagedirective)Conform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacOperating ambient temperature -10°C ~ +70°C *Storage temperatureOperating humidityNote (*)-25°C ~ +85°C< 95% RH non-condensingOperating to 70°C possible with a linear derating to half power from 50°Cto 70°C41 42

Panel Mount150W 24V 1 PhaseFeatures• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Overload protection• z Over voltage protection• z Thermal protection• z MTBF: > 700,000 hrs.• z Efficiency: > 85% typ.• z Expected lifetime: 10 years• z 2 years warranty• z RoHS compliantMechanical drawingsPMC-24V150W1AAPMCLTechnical dataOUTPUT SPECIFICATIONSPMC-24V150W1AAINPUT SPECIFICATIONSPMC-24V150W1AAMECHANICALPMC-24V150W1AASAFETYPMC-24V150W1AAOutput voltage24VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BOutput voltage range22 - 28VOutput current 6.25AOutput powerResidual ripple / peak switching(20MHz)Mains buffering @ nominalload (typ.)Line regulationLoad regulation150W< 100mVpp @ 25°C;< 150mVpp @ -10°C> 15ms @ 115Vac,> 80ms @ 230Vac< 0.5% typical (@ 85-264Vac input, 100% load)< 1% typical (@ 85-264Vac input, 0 to 100 % load)Input frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factorEfficiencyLeakage current47 - 63Hz3.8A max. (3.1A max. @ 115Vac, 2.0A max. @ 230Vac)< 60A @ 115Vac; 120A @ 230VacNA> 86% (typ.)< 1mA @ 240VacDimensions(L x W x H)Unit weight / boxMTBFNoiseCoolingInput terminalOutput terminal178mm x 97mm x 38mm0.480kg> 700,000 hrsSound pressure level (SPL) < 40dBAConvectionInput / output wire AWG 22-14Terminal block 7 Pin rated 300V/20ATerminal block 7 Pin rated 300V/20AImmunitySafety standardVoltage dipsGalvanic isolationEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8 or IEEE C62.41UR/cUR recognize to UL60950-1 and CSA C22.2 No. 60950-1; CB testcertificate and report to IEC60950-1, TUV, CCC (prepared), CE (EMC andLow Voltage directive), not fulfilled EN61000-3-2Conform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacShock proofIEC600068-2-27Operating ambient temperature -10°C ~ +70°C *VibrationIEC600068-2-6Storage temperature-25°C ~ +85°CProtectionstructureIPX0Operating humidity< 95% RHNote (*)Operating to 70°C possible with a linear derating to half power from 50°Cto 70°C43 44

Panel Mount300W 24V 1 PhaseFeatures• z Ease of wire connection toterminals• z Full aluminium casing forlightweight and corrosionresistant handling• z Universal AC input• z Built-in active PFC function,PF > 0.96• z Built-in remote sense function• z Stand-by voltage 12V / 5A• z Overvoltage & overloadprotection• z 3 years warranty• z RoHS compliantMechanical drawingsPMC-24V300W1BALTechnical dataOUTPUT SPECIFICATIONSPMC-24V300W1BAINPUT SPECIFICATIONSPMC-24V300W1BAMECHANICALPMC-24V300W1BASAFETYPMC-24V300W1BAOutput voltage24VInput voltage range85 - 264Vac (DC input range 120 - 375Vdc)Case coverAluminium (Al1100)EMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, Class BOutput voltage rangeStand-by voltage22 - 28V12V / 5AOutput current 12.5AOutput power300WInput frequencyMaximum input currentInrush currentlimitation l²t (+25°C)Power factor47 - 63Hz5A max. (4A max. @ 115Vac, 2A max. @ 230Vac)< 35A @ 115Vac, 70A @ 230VacIEC-61000-3-2Dimensions(L x W x H)Unit weight / boxMTBFNoise199mm x 105mm x 41mm0.820kg> 700,000 hrsSound pressure level (SPL) < 40dBAImmunitySafety standardEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8 or IEC61000-4-12 or IEEEC62.41UR/cUR recognize to UL60950-1 and CSA C22.2 No. 60950-1 CB testcertificate and report to IEC60950-1, SIQ, CCC, CE (EMC and Low Voltagedirective)Residual ripple / peak switching(20MHz)Start-up timeMains buffering @ nominalload (typ.)Rise timeLine regulationLoad regulation< 100mVpp @ 25°C & 50°C< 1000ms @ 100% load> 15ms @ typical range with 300W load< 30ms @ 100% load< 0.5% typical (@ 85-264Vac input, 100% load)< 0.5% typical (with rated input, 0 to 100 % load)EfficiencyLeakage current> 86% @ 115Vac & > 87% @ 230Vac< 1 mA @ 240 VacCoolingInput terminalOutput terminalFanInput / output wire AWG 20-16Shock proofVibrationProtectionstructureTerminal block 7 Pin (C44M-BS1107)Terminal block 7 Pin (C44M-BS1107)IEC600068-2-27IEC600068-2-6IP20Voltage dipsGalvanic isolationConform to EN61000-4-11Input to output: 3KVacInput to ground: 1.5KVacOutput to ground: 0.5KVacOperating ambient temperature -10°C ~ +70°C *Storage temperatureOperating humidity-25°C ~ +85°C< 95% RH non-condensingNote (*)Operating to 70°C possible with a linear derating to half power from 50°Cto 70°C45 46

Panel MountProduct specificationOUTPUT (DC) PMC- 05V035W1AA PMC-12V035W1AA PMC-12V050W1AA PMC-12V100W1AA PMC-24V035W1AA PMC-24V050W1AA PMC-24V075W1AA PMC-24V100W1AAOutput voltage 5V 12V 24VOutput voltage range 4.75 - 5.5V 11 - 14V 22 - 28VOutput current 7.0A 3.0A 4.17A 8.33A 1.46A 2.10A 3.13A 4.17AOutput power 35W 35W 50W 100W 35W 50W 75W 100WResidual ripple / peakswitching (20MHz)Mains buffering @ nominalload (typ.)05V Panel Mount Power Supply 12V Panel Mount Power Supply 24V Panel Mount Power Supply< 70mVpp @ 25°C,< 150mVpp @ nominal values> 80ns @ 230Vac,>15ms @ 115Vac, 25°C> 15ms @ 115Vac, > 80ms @ 230Vac< 100mVpp @ +25°C , < 150mVpp @ -10°C> 15ms @ 115Vac,> 90ms @ 230VacLine regulation< 0.5% typ. (@ 85-264Vac input, 100% load)Load regulationINPUT (AC)Input voltage rangeInput frequencyMaximum input currentInrush current limitation I²t(+25°C) typ.Power factorEfficiencyLeakage current1.0A Max.(0.9A @ 115Vac,0.5A @ 230Vac)< 30A @ 115Vac,< 60A @ 230Vac78% @ 115 Vac,79% @ 230Vac0.72A max. @ 115Vac,0.45A max. @ 230Vac1.1A max. @ 115Vac,0.7A max. @ 230Vac2.0A max. @ 115Vac,1.1A max. @ 230Vac< 30A @ 115Vac; 60A @ 230Vac < 30A @ 115Vac; 65A @ 230Vac < 60A @ 115Vac; < 130A @ 230VacNAConform to EN61000-3-2 STD.CLASS A LIMITS.< 1% typ. (@ 85-264Vac input, 0 to 100 % load)85 - 264Vac (DC input range 120 - 375Vdc)47 - 63Hz0.72A max. @ 115Vac,0.40A max. @ 230Vac< 30A @ 115Vac;60A @ 230VacNA1.1A max. @ 115Vac,0.7A max. @ 230Vac1.8A max. (1.5A max. @ 115Vac,1.0A max. @ 230Vac)2.0A max. @ 115Vac,1.1A max. @ 230Vac< 30A @ 115Vac; 60A @ 230Vac < 40A @ 115Vac; 80A @ 230Vac < 50A @ 115Vac; 100A @ 230Vac> 84% @ 115Vac & 230Vac > 83% @ 115Vac; > 84% @ 230Vac > 84% @ 115Vac; > 86% @ 230Vac > 85% (typical) > 86% (typical)< 1mA @ 240VacConform to EN61000-3-2 STD.CLASS A LIMITS.MECHANICALCase coverAluminium (Al1100)Dimensions (L x W x H) 98mm x 97mm x 38mm 98mm x 97mm x 38mm 128mm x 97mm x 38mm 158mm x 97mm x 38mm 128mm x 97mm x 38mm 158mm x 97mm x 38mmUnit weight / box 0.175kg 0.210kg 0.255kg 0.45kg 0.237kg 0.255kg 0.300kg 0.41kgMTBF> 700,000 hrsNoiseSound pressure level (SPL) < 40dBACoolingConvectionInput terminal Terminal block 5 Pin rated 300V/20A Terminal block 7 Pin rated 300V/20A Terminal block 5 Pin rated 300V/20A Terminal block 7 Pin rated 300V/20AOutput terminal Terminal block 5 Pin rated 300V/20A Terminal block 7 Pin rated 300V/20A Terminal block 5 Pin rated 300V/20A Terminal block 7 Pin rated 300V/20AInput / output wire AWG 18-14 AWG 22-14Shock proofIEC600068-2-27VibrationIEC600068-2-6Protection structureIPX0SAFETYEMC / EmissionsFCC Title 47, Class B/EN55022, CISPR22, CISPR11, Class BImmunityEN61000-4-2, 1995; EN61000-4-3, 1998; EN61000-4-4, 1995; IEC61000-4-5, 1995; EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2, 1994 (Except for PMC-24V150W1AA)Safety standardUR/cUR recognize to UL60950-1and CSA C22.2 No. 60950-1;CB test certificate and reportto IEC60950-1, EN60950-1, CESIQ, CCC prepared (EMC andlow voltage directive)UR/cUR recognize to UL60950-1 and CSA C22.2 No. 60950-1; CB test certificate and report to IEC60950-1,TUV, CCC, CE (EMC and Low Voltage directive)UR/cUR recognized to UL60950-1 and CSA C22.2 No.60950-1; CB test certificate andreport to IEC60950-1; CCC, CE (EMC and low voltage directive), NEMKOUR/cUR recognize to UL60950-1 and CSAC22.2 No. 60950-1; CB test certificateand report to IEC60950-1, TUV, CCC, CE(EMC and Low Voltage directive)UR/cUR recognized to UL60950-1 andCSA C22.2 No.60950-1; CB test certificateand report to IEC60950-1; CCC, CE (EMCand low voltage directive), NEMKOVoltage dipsConform to EN61000-4-11Input to output: 3KVacGalvanic isolationInput to ground: 1.5KVacOutput to ground: 0.5KVacOperating ambient temperature -10°C ~ +70°C *Storage temperatureOperating humidity-25°C ~ +85°CNote (*) Operating to 70°C possible with a linear derating to half power from 50°C to 70°CReference no. EOE11010299 EOE11010185 EOE11010186 EOE11010187 EOE11010118 EOE11010119 EOE11010208 EOE11010120< 95% RH47 48

Panel MountProduct specificationDelta Medical Adapter Power SupplyOUTPUT (DC) PMC-24V150W1AA PMC-24V300W1BA PMC-DSPV100W1AOutput voltage 24V 24V / 5VOutput voltage range 24 - 28V 22 - 28V V1: 24Vdc +/-2% / V2: 5Vdc +/-2%Output current 6.25A 12.5AV1: 24Vdc / 0.3 - 4.0A (2.7A rated) /V2: 5Vdc / 0.8 - 7.0A (7A rated)Output power 150W 300W 100WResidual ripple / peakswitching (20MHz)Mains buffering @ nominalload (typ.)24V Panel Mount Power Supply< 100mVpp @ 25°C , < 150mVpp @ -10°C < 100mVpp @ 25°C & 50°C> 15ms @ 115Vac,> 80ms @ 230Vac> 15ms @ typical range with 300W loadDual Panel Mount Power Supply< 200mVp-p (24V),< 80mVp-p (5V)> 15ms @ 115Vac,> 80ms @ 230VacLine regulation < 0.5% typ. (@ 85-264Vac input, 100% load) +/- 0.5% typ. (@ 85-264Vac input, rated load)Load regulation < 1% typ. (@ 85-264Vac input, 0 to 100 % load) < 0.5% typ. (with rated input, 0 to 100 % load) +/- 1% typ. (@ 85-264Vac input)The product range offers fixed output voltages of 12V for30W and 24V for 60W and 80W output ratings. The stateof the art design offers a wide operating temperature rangeof 0°C to 40°C and its rugged plastic body design can withstandsevere safety & environmental requirements.Delta’s medical adapter offers various protection featuressuch as over voltage, over current & over temperature protection.Operating at wide input range of 90 - 264Vac andoffering 2 types of AC socket’s C8 & C14 for EU & othercountries makes it flexible to use under different operatingconditions. Output connector with 1.5m long cable is Barreltype & available in 2 different sizes for internal pin dimensionsof 2.5mm Ø & 2.1mm Ø for 30W and 60W and DIN-5Pin type for 80W. This is to provide various options to caterfor different user’s needs.INPUT (AC)Input voltage rangeInput frequencyMaximum input currentInrush current limitation I²t(+25°C) typ.3.8A max. (3.1A max. @ 115Vac,2.0A max. @ 230Vac)85 - 264Vac (DC input range 120 - 375Vdc)47 - 63Hz5A max. (4A max. @ 115Vac, 2A max. @ 230Vac)3.2A max. (2A max. @ 115Vac, 1.1A max. @230Vac)< 60A @ 115Vac; 120A @ 230Vac < 35A @ 115Vac, 70A @ 230Vac < 50A @ 115Vac, < 100A @ 230Vac @ 25°CPower factor NA IEC-61000-3-2 IEC-61000-3-2 Class AEfficiency > 86% (typical) > 86% @ 115Vac, > 87% @ 230Vac > 84% @ 115Vac, > 86% @ 230Vac (rated load)Leakage current< 1mA @ 240VacMECHANICALCase coverAluminium (Al1100)Dimensions (L x W x H) 178mm x 97mm x 38mm 199mm x 105mm x 41mm 178mm x 97mm x 38mmUnit weight / box 0.480kg 0.820kg 0.52kgMTBF> 700,000 hrsNoiseSound pressure level (SPL) < 40dBACooling Convection Fan ConvectionInput terminal Terminal block 7 Pin rated 300V/20A Terminal block 7 Pin (C44M-BS1107) Terminal block 7 Pin rated 300V/20AOutput terminal Terminal block 7 Pin rated 300V/20A Terminal block 7 Pin (C44M-BS1107) Terminal block 7 Pin rated 300V/20AInput / output wire AWG 22-14 AWG 20-16 AWG 22-14Shock proofIEC600068-2-27VibrationIEC600068-2-6Protection structure IPX0 IP20 IPX0SAFETYEMC / EmissionsImmunitySafety standardFCC Title 47, Class B/EN55022,CISPR22, CISPR11, Class BEN61000-4-2, 1995; EN61000-4-3, 1998;EN61000-4-4, 1995; IEC61000-4-5, 1995;EN61000-4-6, 1996; EN61000-4-8UR/cUR recognize to UL60950-1 and CSA C22.2No. 60950-1; CB test certificate and report toIEC60950-1, TUV, CCC (prepared), CE (EMC andLow Voltage directive) not fulfilled EN61000-3-2FCC Title 47, Class B/EN55022,CISPR22, Class BEN61000-4-2, 1995; EN61000-4-3, 1998;EN61000-4-4, 1995; IEC61000-4-5, 1995;EN61000-4-6, 1996; EN61000-4-8 orIEC61000-4-12 or IEEE C62.41UR/cUR recognize to UL60950-1 and CSA C22.2No. 60950-1 CB test certificate and report toIEC60950-1, SIQ, CCC, CE (EMC and Low Voltagedirective)FCC Title 47, Class B/EN55022,CISPR22, CISPR11, Class BEN61000-4-2, 1995; EN61000-4-3, 1998;EN61000-4-4, 1995; IEC61000-4-5, 1995;EN61000-4-6, 1996; EN61000-4-8, EN61000-3-2,1994 (Except for PMC-24V150W1AA)UR/cUR recognize to UL60950-1 and CSA C22.2No. 60950-1; CB test certificate and report toIEC60950-1, TUV, CCC, CE (EMC and LowVoltage directive)Voltage dipsConform to EN61000-4-11Input to output: 3KVacGalvanic isolationInput to ground: 1.5KVacOutput to ground: 0.5KVacOperating ambient temperature -10°C ~ +70°C *Storage temperature-25°C ~ +85°COperating humidity < 95% RH non-condensing < 95% RHNote (*) Operating to 70°C possible with a linear deratin to half power from 50°C to 70°CReference no. EOE12010188 EOE13010225 EOE1101019249 50

Medical AC Adapter30W 12V Power SupplyFeaturesMechanical drawingsAMD-12V030WxyA• z 30W average, with peak load45W2-Pin ACIEC 320 C83-Pin ACIEC 320 C14• z Universal input• z AC Receptacle with C8 & C14option• z Efficiency > 83.5%62.0 ±0.530.0 ±0.562.0 ±0.530.0 ±0.5• z No load power consumption< 0.3W• z Energy starcompliant (Level V)Ø2.5 +0.1/-0.0Ø5.5 +0.0/-0.132.71.0 (typ.)9.5 ±0.3 19.54.77.01.51.51.0 (typ.)1.0 (typ.)Ø2.1 +0.1/-0.0Ø5.5 +0.0/-0.132.71.0 (typ.)9.5 ±0.3 19.54.77.01.51.51.0 (typ.)1.0 (typ.)• z Brownout & brownout recovery• z Low leakage current110.0 ±0.5• z Complies to medical safety• z RoHS compliantCable length 1500 ±50Technical dataOUTPUT SPECIFICATIONSAMD-12V030WxyAINPUT SPECIFICATIONSAMD-12V030WxyAMECHANICALAMD-12V030WxyASAFETYAMD-12V030WxyAOutput voltage12VInput voltage range90 - 264VacCase coverPlastic (PC)EmissionsCISPR EN55011 & FCC Title 47 Class B conducted & radiatedOutput current range 2.5AOutput powerTransient responseHold-up timeRise timeStart-up delay time30W0.5ms. for 50% load change typical15ms min. @ 115Vac< 20ms< 3sec.Line regulation ± 0.5%Input frequencyMaximum input currentInrush currentInput protectionLeakage current47 - 63Hz0.65A max. @ 115Vac, 0.4A max. @ 230Vac35A @ 115Vac, 70A @ 230VacInternal fuse< 0.25mADimensions(L x W x H)Unit weight / boxOutput wire sizeConnector typeShock testVibration110mm × 62mm × 30mm0.22kgAWG18Barrel40G, 11ms, 3 shock in each direction5 - 500Hz @ 20m/s² (2G peak) for 20min/axis.ImmunitySafety standardVoltage flickerOperating ambient temperatureEN61000-4-2 Level 3; EN61000-4-3 Level 3; EN61000-4-4 Level 3;EN61000-4-5 Level 3; EN61000-4-6 Level 3; EN61000-4-11UR/cUR as per STD UL60601-1/CSA60601-1; Nemko EN60601-1; CEMark LVD and EMC; CB as per IEC60601-1EN61000-3-30°C ~ +40°C325662Load regulation Excluding output cord ± 1%; Including output cord ± 5%Storage temperature-30°C ~ +85°COutput protectionOver current (auto recovery); Over voltage (latch);Over temperature (latch)Operating humidityCooling5% to 95% non-condensingConvectional - non vented case51 52

Medical AC Adapter60W 24V Power SupplyFeaturesMechanical drawingsAMD-24V060WxyA• z 60W average, with peak load90W2-Pin ACIEC 320 C83-Pin ACIEC 320 C14• z Universal input• z AC Receptacle with C8 & C14option• z Efficiency > 87.0%61.0 ±0.539.5 ±0.561.0 ±0.539.5 ±0.5• z No load power consumption< 0.5WØ2.5 +0.1/-0.032.71.0 (typ.)9.5 ±0.3 19.51.5Ø2.1 +0.1/-0.032.71.0 (typ.)9.5 ±0.3 19.51.5• z Energy starcompliant (Level V)Ø5.5 +0.0/-0.14.77.01.51.0 (typ.)1.0 (typ.)Ø5.5 +0.0/-0.14.77.01.51.0 (typ.)1.0 (typ.)• z Brownout & brownout recovery• z Low leakage current120.0 ±0.5• z Complies to medical safety• z RoHS compliantCable length 1500 ±50Technical dataOUTPUT SPECIFICATIONSAMD-24V060WxyAINPUT SPECIFICATIONSAMD-24V060WxyAMECHANICALAMD-24V060WxyASAFETYAMD-24V060WxyAOutput voltage24VInput voltage range90 - 264VacCase coverPlastic (PC)EmissionsCISPR EN55011 & FCC Title 47 Class B conducted & radiatedOutput current range 2.5AOutput powerTransient responseHold-up timeRise timeStart-up delay time60W0.5ms. for 50% load change typical15ms min. @ 115Vac< 20ms< 3sec.Line regulation ± 0.5%Input frequencyMaximum input currentInrush currentInput protectionLeakage current47 - 63Hz1.20A max. @ 115Vac, 0.65A max. @ 230Vac40A @ 115Vac, 90A @ 230VacInternal fuse< 0.25mADimensions(L x W x H)Unit weight / boxOutput wire sizeConnector typeShock testVibration120mm × 61mm × 40mm0.28kgAWG18Barrel40G, 11ms, 3 shock in each direction5 - 500Hz @ 20m/s² (2G peak) for 20min/axis.ImmunitySafety standardVoltage flickerOperating ambient temperatureEN61000-4-2 Level 3; EN61000-4-3 Level 3; EN61000-4-4 Level 3;EN61000-4-5 Level 3; EN61000-4-6 Level 3; EN61000-4-11UR/cUR as per STD UL60601-1/CSA60601-1; Nemko EN60601-1; CEMark LVD and EMC; CB as per IEC60601-1EN61000-3-30°C ~ +40°C325662Load regulation Excluding output cord ± 1%; Including output cord ± 5%Storage temperature-30°C ~ +85°COutput protectionOver current (auto recovery); Over voltage (latch);Over temperature (latch)Operating humidityCooling5% to 95% non-condensingConvectional - non vented case53 54

Medical AC Adapter80W 24V Power SupplyFeaturesMechanical drawingsAMD-24V080WxyA• z 80W average, with peak load95W• z Universal input3-Pin AC70.0 ±0.55-Pin DINPIN 1 (GND)PIN 3 (V+)• z AC Receptacle with C8 & C14option• z Efficiency > 87.0%IEC 320 C1450.0 ±0.5PIN 4 (GND)45°PIN 2 (GND)PIN 5 (V+)• z No load power consumption< 0.5W• z Energy starcompliant (Level V)• z Brownout & brownout recovery• z Low leakage current150.0 ±0.5• z Complies to medical safety• z RoHS compliantCable length 1500 ±50Technical dataOUTPUT SPECIFICATIONSAMD-24V080WxyAINPUT SPECIFICATIONSAMD-24V080WxyAMECHANICALAMD-24V080WxyASAFETYAMD-24V080WxyAOutput voltage24VInput voltage range90 - 264VacCase coverPlastic (PC)EmissionsCISPR EN55011 & FCC Title 47 Class B conducted & radiatedOutput current range 3.3AOutput powerTransient responseHold-up timeRise timeStart-up delay time80W0.5ms. for 50% load change typical15ms min. @ 115Vac< 20ms< 3sec.Line regulation ± 0.5%Input frequencyMaximum input currentInrush currentInput protectionLeakage current47 - 63Hz0.80A max. @ 115Vac, 0.45A max. @ 230Vac40A @ 115Vac, 80A @ 230VacInternal fuse< 0.25mADimensions(L x W x H)Unit weight / boxOutput wire sizeConnector typeShock testVibration150mm × 70mm × 50mm0.55kgAWG18Din-5 pin40G, 11ms, 3 shock in each direction5 - 500Hz @ 20m/s² (2G peak) for 20min/axis.ImmunitySafety standardVoltage flickerOperating ambient temperatureEN61000-4-2 Level 3; EN61000-4-3 Level 3; EN61000-4-4 Level 3;EN61000-4-5 Level 3; EN61000-4-6 Level 3; EN61000-4-11UR/cUR as per STD UL60601-1/CSA60601-1; Nemko EN60601-1; CEMark LVD and EMC; CB as per IEC60601-1EN61000-3-30°C ~ +40°C325662Load regulation Excluding output cord ± 1%; Including output cord ± 5%Storage temperature-30°C ~ +85°COutput protectionOver current (auto recovery); Over voltage (latch);Over temperature (latch)Operating humidityCooling5% to 95% non-condensingConvectional - non vented case55 56

Medical AdapterProduct specificationOUTPUT (DC) AMD-12V030WxyA AMD-24V060WxyA AMD-24V080WxyAOutput voltage 12V 24VOutput current range 2.5A 2.5A 3.3AOutput power 30W 60W 80WTransient responseHoldup timeRise timeStartup delay time0.5ms. for 50% load change typical15ms min. @ 115Vac< 20ms< 3sec.Line regulation ± 0.5%Load regulation Excluding output cord ± 1%; Including output cord ± 5%Output protectionINPUT (AC)Input voltage rangeInput frequencyMaximum input current0.65A max. @ 115Vac,0.4A max. @ 230VacOver current (auto recovery); Over voltage (latch); Over temperature (latch)1.20A max. @ 115Vac,0.65A max. @ 230Vac90 - 264Vac47 - 63Hz0.80A max. @ 115Vac,0.45A max. @ 230VacInrush current limitation 35A @ 115Vac, 70A @ 230Vac 40A @ 115Vac, 90A @ 230Vac 40A @ 115Vac, 80A @ 230VacInput protectionLeakage current12V Medical Adapter Power Supply24V Medical Adapter Power SupplyInternal fuse< 0.25mAMECHANICALCase coverPlastic (PC)Dimensions (L x W x H) 110mm × 62mm × 30mm 120mm × 61mm × 40mm 150mm × 70mm × 50mmUnit weight / box 0.22kg 0.28kg 0.55kgOutput wire size AWG18 AWG18Connector type Barrel Din-5 pinShock test40G, 11ms, 3 shock in each directionVibration5 - 500Hz @ 20m/s² (2G peak) for 20min/axis.SAFETYEMC / EmissionsCISPR EN55011 & FCC Title 47 Class B conducted & radiatedImmunityEN61000-4-2 Level 3; EN61000-4-3 Level 3; EN61000-4-4 Level 3; EN61000-4-5 Level 3; EN61000-4-6 Level 3; EN61000-4-11UR/cUR as per STD UL60601-1/CSA60601-1; Nemko EN60601-1; CE Mark LVD and EMC; CB as per IEC60601-1Safety standardMODEL NUMBERING FOR AMD-12V030WxyAAM D 12V 030W x y AProduct type Desktop Output voltage Output powerInput configuration# 2-2 PIN AC# 3-3 PIN ACMODEL NUMBERING FOR AMD-24V060WxyAConnector typeA - Ø inner 2.5mmB - Ø inner 2.1mm(Ø outer 5.5mm)AM D 24V 060W x y AProduct type Desktop Output voltage Output powerInput configuration# 2-2 PIN AC# 3-3 PIN ACMODEL NUMBERING FOR AMD-24V080WxyAConnector typeA - Ø inner 2.5mmB - Ø inner 2.1mm(Ø outer 5.5mm)AM D 24V 080W x y AProduct type Desktop Output voltage Output powerInput configuration# 2-2 PIN AC# 3-3 PIN ACOutput connector typeC - 5 PINDelta standard productDelta standard productDelta standard product325662Voltage flickerOperating ambient temperatureStorage temperatureOperating humidityCoolingEN61000-3-30°C ~ +40°C-30°C ~ +85°C5% to 95% non-condensingConvectional - non vented case57 58

www.deltapsu.comE-mail: vl@delta.co.thASIAEUROPENORTH AMERICADelta Electronics (Thailand)Public Company Limited909 Moo 4, E.P.Z., Bangpoo Industrial Estate,Tambon Prakasa,Amphur Muang Samutprakarn,Samutprakarn 10280, ThailandTel: +662 709 2800Fax: +662 709 2827Delta Greentech (China) Co., Ltd.NO.893 South Zhongshan No.1 Road ,Luwan District Shanghai , PR.C 200023Tel: +86 21 63012827Fax: +86 21 63012307Delta Electronics, Inc.Taoyuan 131-1, Xingbang RoadGuishan Industrial Zone,Taoyuan Country 33370, Taiwan R.O.C.Tel: +886 3 362 6301Fax: +886 3 362 7267DELTA INDIA ELECTRONICS PVT. LTD.Plot No. 43,Sector – 35, HSIIDC, Gurgaon,Haryana-122001Tel: +91 124-4874900,+91 124-4169040Fax: +91 124-4874945Delta Electronics (Japan), Inc.2-1-14 Shibadaimon, Minato-Ku,Tokyo, 105-0012, Japan.Tel: +81 3 5733 1330 (Direct In)+81 3 5733 1188 (Main)Fax: +81 3 5733 1288Delta Electronics (Korea), Inc.Duksoo B/D 7F, 234-9, Nonhyun-dong,Kangnam-gu, Seoul 135-010, KoreaTel: +82 2 515 5303 Ext. 1411Fax: +82 2 515 5302Delta Energy Systems (Germany) GmbHTscheulinstrasse 2179331 Teningen - GermanyTel: +49 7641 455 418Fax: +49 7641 455 318Amsterdam OfficeDeltronics (Netherlands) BVZandsteen 152132 MZ Hoofddorp - The NetherlandsTel: +31 20 655 0900 ext.954Fax: +31 20 655 0999Eindhoven OfficeDeltronics (Netherlands) B.V.De Witbogt 15,5652 AG Eindhoven - The NetherlandsTel: +31 40 259 2580Fax: +31 40 259 2851Germany OfficeCoesterweg 45, D-59494 SoestTel: +49-2921-987-0Fax: +49-2921-987-620Glasgow Office1 Redwood Court, Peel Park, East Kilbride,G74 5PF, Scotland, United KingdomTEL : 44-1355-588-888FAX: 44-1355-588-889Delta Product CorporationP.O. Box 12173, 5101 Davis Drive,Research Triangle Park, NC 27709, U.S.A.Tel: +1 919 767 3813Fax: +1 919 767 3969CENTRAL AND SOUTH AMERICADelta Product CorporationP.O. Box 12173, 5101 Davis Drive,Research Triangle Park, NC 27709, U.S.A.Tel: +1 919 767 3812Fax: +1 919 767 2390Delta Greentech ( Brasil )S.A.Vendas: Rua Itapeva, Nº 26, 3º andar01332-000 - São Paulo - SP - BrasilTel: +55 11 3568-3854Fax: +55 11 3568-386514 February 2011 - All information and specifications are subject to change without notice