Krohne Mass Flow Meter Tech Sheet - Don Johns
Krohne Mass Flow Meter Tech Sheet - Don Johns Krohne Mass Flow Meter Tech Sheet - Don Johns
2 TECHNICAL DATAOPTIMASS 10002.1 Technical data• The following data is provided for general applications. If you require data that is morerelevant to your specific application, please contact us or your local representative.• Additional information (certificates, special tools, software,...) and complete productdocumentation can be downloaded free of charge from the website (Downloadcenter).Measuring systemMeasuring principleApplication rangeMeasured valuesCalculated valuesCoriolis mass flowMass flow and density measurement of fluids, gases and solidsMass, density, temperatureVolume, referred density, concentration, velocityDesignBasicFeaturesVariantsCompact versionRemote versionModbus versionSystem consists of a measuring sensor and a converter to process theoutput signalFully welded maintenance free sensor with twin straight measuring tubesIntegral converterAvailable with field, wall or 19" rack mount versions of the converterSensor with integral electronics providing Modbus output for connection to aPLCMeasuring accuracyMassLiquidGasRepeatabilityZero stabilityStainless SteelReference conditionsProduct±0.15% of actual measured flow rate + zero stability±0.5% of actual measured flow rate + zero stabilityBetter than 0.05% plus zero stability (includes the combined effects ofrepeatability, linearity and hysteresis)±0.01% of maximum flow rate with respective sensor sizeWaterTemperature 20°C / 68°FOperating pressure1 barg / 14.5 psigEffect on sensor zero point caused by a shift in process temperatureStainless Steel 0.001% per 1°C / 0.00055% per 1°FEffect on sensor zero point caused by a shift in process pressureStainless SteelDensityMeasuring range 400...2500 kg/m 3 / 25...155 lbs/ft 30.00012% of the max flow rate per 1 bar rel . / 0.0000083% of the max flow rateper 1 psigAccuracy ±2 kg/m 3 / ±0.13 lbs/ft 3 (S15: ±5 kg/m 3 / ±0.33 lbs/ft 3 )On site calibration ±0.5 kg/m 3 / ±0.033 lbs/ft 38www.krohne.com03/2009 - 4000040302 - TD OPTIMASS 1000 R03 en
OPTIMASS 1000TECHNICAL DATA 2TemperatureAccuracy±1°C / 1.8°FOperating conditionsMaximum flow ratesS15S25S40S50Ambient temperatureCompact version with AluminiumconverterCompact version with Stainless SteelconverterRemote versionsProcess temperatureFlanged connectionHygienic connectionNominal pressure at 20°C / 68°FMeasuring tubeStainless SteelOuter cylinder6500 kg/h / 240 lbs/min27000 kg/h / 990 lbs/min80000 kg/h / 2935 lbs/min170000 kg/h / 6235 lbs/min-40...+60°C / -40…+140°FExtended temperature range: +65°C / +149°F for some I/O options. For moreinformation contact manufacturer.-40...+55°C / -40…+130°F-40...+65°C / -40…+149°F-40…+130°C / -40…+266°F-20…+130°C / -4…+266°F-1…100 barg / -14.5…1450 psigNon PED / CRN approved Typical burst pressure > 100 barg / 1450 psig at 20°CPED / CRN approved secondary-1…63 barg / -14.5…910 psigcontainmentPED approved secondary containmentFluid propertiesPermissible physical conditionPermissible gas content (volume)Permissible solid content (volume)Protection category (acc. to EN 60529)-1…100 barg / -14.5…1450 psigLiquids, gases, slurriesContact manufacturer for informationContact manufacturer for informationIP 67, NEMA 4XInstallation conditionsInlet runsOutlet runsNone requiredNone requiredMaterialsMeasuring tube Stainless Steel UNS S31803 (1.4462)SpigotStainless Steel 316 / 316L (CF3M / 1.4409) dual certifiedFlangesStainless Steel 316 / 316L (1.4401 / 1.4404) dual certifiedOuter cylinderStainless Steel 304 / 304L (1.4301 / 1.4307) dual certifiedOptional Stainless Steel 316 / 316L (1.4401 / 1.4404) dual certifiedHeating jacket versionHeating jacket Stainless Steel 316L (1.4404)The outer cylinder is in contact with the heating medium03/2009 - 4000040302 - TD OPTIMASS 1000 R03 enwww.krohne.com9
- Page 1 and 2: OPTIMASS 1000 Technical DatasheetSe
- Page 3 and 4: OPTIMASS 1000PRODUCT FEATURES 11.1
- Page 5 and 6: OPTIMASS 1000PRODUCT FEATURES 11.2
- Page 7: OPTIMASS 1000PRODUCT FEATURES 1Ener
- Page 11 and 12: OPTIMASS 1000TECHNICAL DATA 2ATEX (
- Page 13 and 14: OPTIMASS 1000TECHNICAL DATA 2OPTIMA
- Page 15 and 16: OPTIMASS 1000TECHNICAL DATA 22.3 Gu
- Page 17 and 18: OPTIMASS 1000TECHNICAL DATA 22.4 Di
- Page 19 and 20: OPTIMASS 1000TECHNICAL DATA 2ASME 1
- Page 21 and 22: OPTIMASS 1000TECHNICAL DATA 22.4.2
- Page 23 and 24: OPTIMASS 1000TECHNICAL DATA 2Hygien
- Page 25 and 26: OPTIMASS 1000TECHNICAL DATA 22.4.3
- Page 27 and 28: OPTIMASS 1000INSTALLATION 33.1 Inte
- Page 29 and 30: OPTIMASS 1000INSTALLATION 3Zero cal
- Page 31 and 32: OPTIMASS 1000NOTES 403/2009 - 40000
2 TECHNICAL DATAOPTIMASS 10002.1 <strong>Tech</strong>nical data• The following data is provided for general applications. If you require data that is morerelevant to your specific application, please contact us or your local representative.• Additional information (certificates, special tools, software,...) and complete productdocumentation can be downloaded free of charge from the website (Downloadcenter).Measuring systemMeasuring principleApplication rangeMeasured valuesCalculated valuesCoriolis mass flow<strong>Mass</strong> flow and density measurement of fluids, gases and solids<strong>Mass</strong>, density, temperatureVolume, referred density, concentration, velocityDesignBasicFeaturesVariantsCompact versionRemote versionModbus versionSystem consists of a measuring sensor and a converter to process theoutput signalFully welded maintenance free sensor with twin straight measuring tubesIntegral converterAvailable with field, wall or 19" rack mount versions of the converterSensor with integral electronics providing Modbus output for connection to aPLCMeasuring accuracy<strong>Mass</strong>LiquidGasRepeatabilityZero stabilityStainless SteelReference conditionsProduct±0.15% of actual measured flow rate + zero stability±0.5% of actual measured flow rate + zero stabilityBetter than 0.05% plus zero stability (includes the combined effects ofrepeatability, linearity and hysteresis)±0.01% of maximum flow rate with respective sensor sizeWaterTemperature 20°C / 68°FOperating pressure1 barg / 14.5 psigEffect on sensor zero point caused by a shift in process temperatureStainless Steel 0.001% per 1°C / 0.00055% per 1°FEffect on sensor zero point caused by a shift in process pressureStainless SteelDensityMeasuring range 400...2500 kg/m 3 / 25...155 lbs/ft 30.00012% of the max flow rate per 1 bar rel . / 0.0000083% of the max flow rateper 1 psigAccuracy ±2 kg/m 3 / ±0.13 lbs/ft 3 (S15: ±5 kg/m 3 / ±0.33 lbs/ft 3 )On site calibration ±0.5 kg/m 3 / ±0.033 lbs/ft 38www.krohne.com03/2009 - 4000040302 - TD OPTIMASS 1000 R03 en
Change language