Krohne Mass Flow Meter Tech Sheet - Don Johns

More documents

Recommendations

Info

2 TECHNICAL DATAOPTIMASS 10002.4.4 Purge port optionDimensions [mm]S15 S25 S40 S50A 30 ±1.0 65 ±1.0B 30 ±1.0 65 ±1.0Dimensions [inches]S15 S25 S40 S50A 1.2 ±0.04 2.5 ±0.04B 1.2 ±0.04 2.5 ±0.0426www.krohne.com03/2009 - 4000040302 - TD OPTIMASS 1000 R03 en
OPTIMASS 1000INSTALLATION 33.1 Intended useThis mass flowmeter is designed for the direct measurement of mass flow rate, product densityand product temperature. Indirectly, it also enables the measurement of parameters like totalmass, concentration of dissolved substances and the volume flow. For use in hazardous areas,special codes and regulations are also applicable and these are specified in a separatedocumentation.3.2 Mounting restrictions3.2.1 General installation principlesThere are no special installation requirements but you should note the followingpoints:• Support the weight of the meter.• The meter can be supported on the sensor body.• On larger meter sizes and hygienic connections, it is strongly recommended that the meter isnot supported solely by the process pipework.• No straight runs are required.• The use of reducers and other fittings at flanges, including flexible hoses, is allowed but youshould take care to avoid cavitation.• Avoid extreme pipe size reductions.• <strong>Meter</strong>s are not affected by crosstalk and can be mounted in series or in parallel.• Avoid mounting the meter at the highest point in the pipeline where air / gas can collect.03/2009 - 4000040302 - TD OPTIMASS 1000 R03 enwww.krohne.com27
Page 1 and 2: OPTIMASS 1000 Technical DatasheetSe
Page 3 and 4: OPTIMASS 1000PRODUCT FEATURES 11.1
Page 5 and 6: OPTIMASS 1000PRODUCT FEATURES 11.2
Page 7 and 8: OPTIMASS 1000PRODUCT FEATURES 1Ener
Page 9 and 10: OPTIMASS 1000TECHNICAL DATA 2Temper
Page 11 and 12: OPTIMASS 1000TECHNICAL DATA 2ATEX (
Page 13 and 14: OPTIMASS 1000TECHNICAL DATA 2OPTIMA
Page 15 and 16: OPTIMASS 1000TECHNICAL DATA 22.3 Gu
Page 17 and 18: OPTIMASS 1000TECHNICAL DATA 22.4 Di
Page 19 and 20: OPTIMASS 1000TECHNICAL DATA 2ASME 1
Page 21 and 22: OPTIMASS 1000TECHNICAL DATA 22.4.2
Page 23 and 24: OPTIMASS 1000TECHNICAL DATA 2Hygien
Page 25: OPTIMASS 1000TECHNICAL DATA 22.4.3
Page 29 and 30: OPTIMASS 1000INSTALLATION 3Zero cal
Page 31 and 32: OPTIMASS 1000NOTES 403/2009 - 40000

Krohne Mass Flow Meter Tech Sheet - Don Johns

Create successful ePaper yourself

Delete template?

Save as template?