Specification 16510 Lighting Fixtures & Ballasts - Windows and ...
Specification 16510 Lighting Fixtures & Ballasts - Windows and ... Specification 16510 Lighting Fixtures & Ballasts - Windows and ...
SECTION 16510LIGHTING FIXTURES AND BALLASTSRemarks:Location:Supply:Lamp:All finishes to be verified. Electrical contractor to verify fixture’mounting and aluminum trim detail with ceiling system. Provideall mounting accessories as required for complete installation.Corridor, elevator lobby277 Volts(1) F28T5/835(2) Q50MR16/C/WFL55 (General Electric)F-4 Description: Wall-mounted flood light, copper alloy cast aluminum body.Fixture head size: 4”W x 2”D x 7”high with 18”long bracket. One18W 4P compact fluorescent lamp, with clear prismatictempered glass lens, integral electronic ballast shall be supplied.Manufacturers: Design Plan, NIGHTLINE A, NA2-8-58-1-TBD-0-TBV-T-0Remarks: Finish to be determined by architect. Center of theballast/mounting box to be installed 6” below the ceiling line(refer to architectural elevations for fixture mounting locations).Architect to verify finish. Lighting Fixture Supplier shall verifyfixture mounting detail and provide all mounting accessories asrequired for complete wall mounting installation.Location:Pantry/copy roomSupply:277 VoltsLamp:(1) PL-C 18W/835/4P/ALTOF-5 Description: Cove mounted fluorescent (mini-staggered) channel with one 4’28W T5 fluorescent lamps. Steel housing, nominally 4”W x 25/8”H. Integral electronic ballast shall be supplied.Manufacturers: Legion Lighting, 1520-232-4 EBOMark LightingZumtobel,Linear LightingRemarks:Provide all mounting accessories as required for complete coveinstallation. See lighting sketches for the cove size and lampposition. Continuous staggered mounting on 3’-9” center, usedifferent length of lamp at the end to make maximum 6” end ofthe cove.Location:Pantry (wall washer) coves, copy rooms.Supply:277 VoltsLamp:(1) F28T5/835 @ 3’-9” O.CF-6 Description: Under-cabinet fixture, with one 28W T5 fluorescent lamp, steelhousing nominal 5”W x 2”H x 4’ long. Ribbed translucent whiteacrylic wrap around plastic diffuser, integral electronic ballast.Manufacturers: Legion LightingBelfer LightingRemarks:Architect to verify finish. Lighting Fixture Supplier shall verifyfixture mounting detail with cabinet system and coordinate witharchitect’s details. Provide all mounting accessories as requiredfor complete installation.Location:Pantry, copy rooms.Supply:Lamp:120 Volts(1) F28T5/835 @ 4’-0” O.C.(1) F21T5/835 @ 3’-0” O.C.F-7 Description: Wall-mounted asymmetric fluorescent uplight with one 54WT5HO lamp and integral ET5HO ballast. Extruded smoothsurface aluminum housing, nominal 4’L x 8”D x 4-3/8” H. Semi-The New York Times 16510-15 Lighting fixtures and ballastsHeadquarters BuildingPre-purchase Award Package1/7/05
SECTION 16510LIGHTING FIXTURES AND BALLASTSManufacturers:Remarks:Location:Supply:Lamp:gloss white finish, with end plates and cutoff visor, anddecorative mounting bracket and wall plate.Elliptipar: F106-T155-S-02-TBV-V0-0Winona LightingArchitect to verify finish. Lighting Fixture Supplier shall verifyfixture mounting detail with wall mounting system and coordinatewith architect’s wall detail. Fixture shall be mounted at least one(1) foot below ceiling. Provide all mounting accessories asrequired for complete installation.Service Elevator Lobby277 Volts(1) F54 T5/835/HOF-8 Description: Customized linear channel with two 4’-0”L 28W T5 fluorescentlamp, nominally 4”W x 1 ¼”H x 48”L. die-formed aluminumchannel body with white powder coated enamel finish, specularanodized aluminum reflector, integral electronic ballast, mountedin architectural uplight cove.Manufacturers: Electrix: EX-31-S-2-UE-46-ILinear LightingMark Lighting,Zumtobel,Remarks:Fixture to be centered within curtain wall module, typically a five(5) feet wide module. Provide all mounting accessories asrequired for complete installation.Location:Ceiling perimeter coveSupply:277 VoltsLamp:(1) F28T5/835F-9 Description: Stem-mounted industrial down light, with two 4’-0” long 28W T5fluorescent exposed lamp. Steel reflector of powdered coatedwhite finish, nominally 4 1/8”W x 2 1/2”H x 46”L, with integralelectronic ballast shall be supplied.Manufacturers: Lightolier: SV5R-1-W-4-S-SLD-Stem mounted (T5 lamp)Legion LightingRemarks:Architect to verify finish. Lighting Fixture Supplier shall verifyfixture stem mounting detail (with ceiling system), stem mountinglength and coordinate with architectural details. Provide allmounting accessories as required for complete installation.Location:Technology Room (TR)Supply:277 VoltsLamp:(2) F28T5/835F-10 Description: Recessed fluorescent trouffer, die-formed steel housingnominally 5” deep x 12”W x 4’-0” L. Steel reflector, flat whiteacrylic lens, integral electronic ballast. Flange type to bedetermined by ceiling type. The lamps are UV emission blocked.Manufacturers:Remarks:Location:Supply:Lamp:Legion Lighting: 71-332-EBO-FAArchitect to verify finish. Lighting Fixture Supplier shall verifyfixture’s mounting detail with ceiling system and coordinate witharchitect’s detail. Provide all mounting accessories as requiredfor complete installation.Kitchen Support Room277 VoltsSpecial UV-Blocked lamps: (3) F32T8/GO (General Electric)The New York Times 16510-16 Lighting fixtures and ballastsHeadquarters BuildingPre-purchase Award Package1/7/05
- Page 1 and 2: The New York Times BuildingExecutiv
- Page 3 and 4: SECTION 16510LIGHTING FIXTURES AND
- Page 5 and 6: SECTION 16510LIGHTING FIXTURES AND
- Page 8 and 9: SECTION 16510LIGHTING FIXTURES AND
- Page 10 and 11: SECTION 16510LIGHTING FIXTURES AND
- Page 12 and 13: SECTION 16510LIGHTING FIXTURES AND
- Page 14 and 15: SECTION 16510LIGHTING FIXTURES AND
- Page 18 and 19: SECTION 16510LIGHTING FIXTURES AND
- Page 20 and 21: SECTION 16510LIGHTING FIXTURES AND
- Page 22: SECTION 16510LIGHTING FIXTURES AND
SECTION <strong>16510</strong>LIGHTING FIXTURES AND BALLASTSRemarks:Location:Supply:Lamp:All finishes to be verified. Electrical contractor to verify fixture’mounting <strong>and</strong> aluminum trim detail with ceiling system. Provideall mounting accessories as required for complete installation.Corridor, elevator lobby277 Volts(1) F28T5/835(2) Q50MR16/C/WFL55 (General Electric)F-4 Description: Wall-mounted flood light, copper alloy cast aluminum body.Fixture head size: 4”W x 2”D x 7”high with 18”long bracket. One18W 4P compact fluorescent lamp, with clear prismatictempered glass lens, integral electronic ballast shall be supplied.Manufacturers: Design Plan, NIGHTLINE A, NA2-8-58-1-TBD-0-TBV-T-0Remarks: Finish to be determined by architect. Center of theballast/mounting box to be installed 6” below the ceiling line(refer to architectural elevations for fixture mounting locations).Architect to verify finish. <strong>Lighting</strong> Fixture Supplier shall verifyfixture mounting detail <strong>and</strong> provide all mounting accessories asrequired for complete wall mounting installation.Location:Pantry/copy roomSupply:277 VoltsLamp:(1) PL-C 18W/835/4P/ALTOF-5 Description: Cove mounted fluorescent (mini-staggered) channel with one 4’28W T5 fluorescent lamps. Steel housing, nominally 4”W x 25/8”H. Integral electronic ballast shall be supplied.Manufacturers: Legion <strong>Lighting</strong>, 1520-232-4 EBOMark <strong>Lighting</strong>Zumtobel,Linear <strong>Lighting</strong>Remarks:Provide all mounting accessories as required for complete coveinstallation. See lighting sketches for the cove size <strong>and</strong> lampposition. Continuous staggered mounting on 3’-9” center, usedifferent length of lamp at the end to make maximum 6” end ofthe cove.Location:Pantry (wall washer) coves, copy rooms.Supply:277 VoltsLamp:(1) F28T5/835 @ 3’-9” O.CF-6 Description: Under-cabinet fixture, with one 28W T5 fluorescent lamp, steelhousing nominal 5”W x 2”H x 4’ long. Ribbed translucent whiteacrylic wrap around plastic diffuser, integral electronic ballast.Manufacturers: Legion <strong>Lighting</strong>Belfer <strong>Lighting</strong>Remarks:Architect to verify finish. <strong>Lighting</strong> Fixture Supplier shall verifyfixture mounting detail with cabinet system <strong>and</strong> coordinate witharchitect’s details. Provide all mounting accessories as requiredfor complete installation.Location:Pantry, copy rooms.Supply:Lamp:120 Volts(1) F28T5/835 @ 4’-0” O.C.(1) F21T5/835 @ 3’-0” O.C.F-7 Description: Wall-mounted asymmetric fluorescent uplight with one 54WT5HO lamp <strong>and</strong> integral ET5HO ballast. Extruded smoothsurface aluminum housing, nominal 4’L x 8”D x 4-3/8” H. Semi-The New York Times <strong>16510</strong>-15 <strong>Lighting</strong> fixtures <strong>and</strong> ballastsHeadquarters BuildingPre-purchase Award Package1/7/05
Change language