Facom Best Sellers Brochure Euro 2012.pdf - E. Fox (Engineers)

IDEAL FORCONTACTLESSCURRENTMEASUREMENTSWITH FACOM 711AAND 714AMULTIMETERS!IDEAL FORMAINTENANCE!NEWDDT/ VAT SAFETY TESTERNEWMAINTENANCE MULTIMETERNEWCLIP-ON AMMETERNEWCLIP-ON MULTIMETER- Checks the lack of "VAT" voltage, phase detector,continuity tester, test of 30 mA circuit breaker,phase rotation indicator- Auto test- Multi-function tester- Phase/neutral identification- Continuity test- 30 mA differential circuit-breaker test- Compliant with the NF EN 61010-600V cat IIIand IEC 61243-3 standards (VAT/DDT)- No fuse- Probe gap 19 mm for easy testing if Europeansockets- Test probes spacing for quick testingof household fusesESSENTIAL FOR MAINTENANCEAND TROUBLESHOOTING INBUILDINGS AND INDUSTRIALENVIRONMENT!- AUTO calibration, wide backlit LCR screen designedfor tough environments- RMS/CAT III measurement- Voltmeter: AC/DC from 0 to 600 V- Ammeter: AC/DC from 0 to 10 A- Ohmmeter: 0 to 40 MOhm- Capacitance meter: 0 to 100 µF- Frequency meter: 0 to 100 KHZ- Cyclic ratio: 0.1% to 99.9%- Continuity test- Diode test- Supplied with protection cover and a pair of probesIDEAL FOR INDUSTRIALMAINTENANCE, ELECTRONIC ORELECTROMECHANICAL ASSEMBLYTROUBLESHOOTING, AND FORTEACHING PURPOSES!- Compatible with all multimeters- RMS/600V CAT III measurement- Measures AC and DC currents from 0 to 600 A- Supplied with protection coverNO FUSEAUTOMATIC 0 POINT SETTING- AUTO calibration, backlit LCR screen designedfor tough environment- RMS/600V CAT III measurement- Voltmeter: AC/DC from 0 to 600 V- Ammeter: AC/DC from 0 to 400 A- Ohmmeter: 0 to 20 MOhm- Continuity testing- Diode test < 50 Ω- Supplied with protection cover and a pairof probes (711A-L)CURRENT MEASUREMENTWITHOUT CONTACT- No risk of short circuit in caseof misuseAUTO CALIBRATION, BACKLIT LCRSCREEN DESIGNED FOR TOUGHENVIRONMENTS701BPB€ 99.96711A€ 252.52711A.P500PB€ 262.55712A€ 416.96CAN BE USED WITHAMMETER CLAMP711A-P500NEWAUTOMOTIVE MULTIMETER+- RMS/600V CAT III measurement- To be used with ammeter clamp 711A-P500- Measures AC/DC currents without contact from0 to 500 A- Automatic zero point setting- Supplied with a pair of probes, battery analysiscable, K temperature probe and protection coverAUTO CALIBER- Voltmeter ammeter- Continuity tester ohmmeter- Diode testing- Temperature measurement- Cyclic ratio- Cam angle- Measurement of internal batteryresistance- Tachometer (with optionalclamp)- Frequency meterNEWAUTOMOTIVE MULTIMETER +AMMETER CLAMP SET- Including:- Automotive Multimeter 714A- Clip-on Ammeter 711A.P500ESSENTIAL TOOL FORELECTRONIC FAILUREDIAGNOSTICSNEWINFRARED THERMOMETER- Can be used to perform either non-contacttemperature measurements using the infraredthermometer in association with the laser pointer,or contact temperature measurements by connectingit to a type K thermocouple- IR measuring range: - 60°C to 500°C- D/S ratio: 11/1- Emissivity: Adjustable- Mode: Min/Max, Differential, Average…- Contact probes: DX.12-06, DX.12-08, DX.12-11,DX.12-15, DX.12-17, DX.12RINFRARED TEMPERATUREMEASUREMENT WITH LASERPOINTER AND SOCKET TO USEA K TYPE THERMOCOUPLE714A € 358.87 714A-1PB € 358.87DX.T100PB€ 315.4844