Declaration of Performance - Del Conca

Declaration of PerformanceNo. 001DoP-CDC-BIa1: Unique identification of product type: Dry pressed ceramic tiles with water absorption E b ≤ 0,5%2: Intended use(s) : For internal and external walls and floorings3: Name and contact address of the manufacturer: Ceramica del Conca S.p.a. - Via Croce, 8 – 47832 SanClemente (RN) - Italia4: AVCP : Systems 45: Name and identification number of notified laboratory: not applicable6: Declared performancesEssential characteristics Performance Harmonized technical specificationRelease of dangerous substance, for:Reaction to fire A1 - A1 FLEN 14411:2012CadmiumLeadBreaking strengthSlipperinessTactilityNPDNPD>1300 NSee table attachedNPDBond/Strength adhesion, for:Cementitious adhesive, type C2 1 N/mm 2Thermal shock resistancePassDurability for:Internal use:External use: (freeze/thaw resistance)PassPassThe performance of the product identified in point 1 is in conformity with the declared performances in point 6.This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 3.Signed for and on behalf of the manufacturer by: Luca Costi Technical DirectorPlace and date of issueSignatureSan Clemente 27/06/2013This documents of performance does not include decorative accessories, trim and mosaic

*Excluded Lapp./Rett.*Escluso Lapp./Rett.Porcellana d'arredoRoverDIN51130 DIN51097ASTM C1028BCRAasciutto/dry bagnato/wet asciutto/dry bagnato/wetHBR A+B* >0,60* >0,40*HPF R9 A >0,60 >0,60 >0,40 >0,40HZL A >0,60 >0,40 >0,40HZG R13 A+B+C >0,60 >0,60 >0,40 >0,40ZS A >0,60 >0,40 >0,40.IT R9 A >0,60 >0,60 >0,40 >0,40KY R9 >0,60 >0,40 >0,40OAYU R9 >0,60 >0,60 >0,40 >0,40LB R9 A+B >0,60 >0,40LF R10 A+B >0,60 >0,60 >0,40LG R12 A+B+C >0,60 >0,60 >0,74 >0,74LM R9 A+B >0,60 0,60 >0,40 >0,40FastHardContractMonos PLUSDueLM FAST R9 A+B >0,60 0,60 >0,40 >0,40HBQ R9 A+B >0,60 >0,40 >0,40HCP R11 A >0,40 >0,40HDT R9* A+B* >0,40* >0,40*HEL R10 A+B >0,60 >0,40HGT R11 A+B+C >0,40 >0,74HMC R11 A+B >0,60 >0,60 >0,74 >0,40HNT R12 A+B >0,60 >0,60 >0,74 >0,40HPE R11 A+B+C >0,60 >0,60 >0,40 >0,40HPR R11 A+B+C >0,60 >0,60 >0,40 >0,40HRC R10 >0,40 >0,40HRK R12 A+B+C >0,60 >0,60 >0,74 >0,74HRN R9 >0,40 >0,40HRT R12 A+B+C >0,60 >0,60 >0,74 >0,74HSF R9 >0,60 >0,60 >0,40 >0,40HSU R10* A+B* >0,60* 0,60* >0,40* >0,40*HTA R9* A+B+C* >0,60* 0,60* >0,40* >0,40*HTS R10 A+B+C >0,60HTV R9 >0,60 >0,60 >0,40 >0,40HEM A+B >0,60 >0,60 >0,40 >0,40HEV >0,60 >0,40HEV grip R10 A+BHEX A >0,60HPV R11 A+B >0,60 >0,60 >0,74 >0,74HSTME >0,40HBQ 2 R12 A+B+C >0,60 >0,60 >0,74 >0,74HNT 2 R12 A+B+C >0,60 >0,60 >0,74 >0,74HPR 2 R12 A+B+C >0,60 >0,60 >0,74 >0,74HSU 2 R12 A+B+C >0,60 >0,60 >0,74 >0,74EBJSMOMPMRMTMVPTTRTYFMTMTHERMATILE