Super Cub - Hangar 9

Step 3. Secure the axles to the landing gear using a ratchet with1/2" socket and adjustable wrench.Step 6. Locate the main wheels (2) and wheel collars withsetscrew (4). Slide a wheel collar onto the axle and secure it1/4" out from the beginning of the axle. Next slide on a wheeland another collar tight against the first wheel collar and markthe axle with a felt-tipped pen.AStep 4. Mount the landing gear to the fuselage using the fourscrews and washers provided. Blind nuts have already beeninstalled. Be sure to use Threadlock on the screws to preventthem from coming loose.BStep 5. Locate the four landing gear wire brackets, two with anL-bend and two with a V-bend. Mount the brackets using thefour small screws washers and nuts. Use a washer under thehead of the screw and the nut. Mount the "L" bracket in theupper holes and the "V" in the lower holes near the axles.Use Threadlock on the small screws to prevent them fromcoming loose.30