Super Cub - Hangar 9

Section 4: Mounting the Wing to the FuselageParts Needed• Fuselage• Right wing assembly• Left wing assembly• Wing tube• 1/4" x 20 nylon wing bolts w/washer (2)Tools Needed• Flathead screwdriverBStep 1. Locate the aluminum wing tube and slide it into thefuselage, leaving an equal amount on either side of the fuselage.Step 3. Repeat Step 2 for the other wing panel.Step 4. Remove the wings at this time. The wing struts will beinstalled later in Section 16.Note: You will need to reinstall the wings during theinstallation of the horizontal stabilizer.Step 2. Carefully slide one wing panel onto the wing tube. Feedthe servo extension leads through the hole in the fuselage wingroot. Align the anti-rotation dowel with its hole in the fuselageand seat the wing against the fuselage. Thread a 1/4" x 20 nylonwing bolt and washer through the fuselage wing root and into thepreinstalled blind nut in the wing. Tighten the bolts finger tight.A14